Engineering Commons^™

18f-Fdg Pet/Ctct-Based Radiomics For The Prediction Of Radiochemotherapy Treatment Outcomes Of Cervical Cancer, Badereldeen Abdulmajeed Altazi

USF Tampa Graduate Theses and Dissertations

Cervical cancer remains the third most commonly diagnosed gynecological malignancy in the United States and throughout the world despite being potentially preventable. Patients diagnosed with cervical cancer may develop local recurrence in the cervix and surrounding structures (vaginal apex, parametrial, or paracervical), regional recurrence in pelvic lymph nodes, distant metastasis, or a combination of all. The management of such treatment outcomes has not been subject to rigorous investigation. Therefore, there is a need for studies and clinical trials that focus on decision making to support the choice of the best treatment modality that leads to the minimal number of adverse …

Dns And Les Of Scalar Transfer Across An Air-Water Interface During Inception And Growth Of Langmuir Circulation, Amine Hafsi

USF Tampa Graduate Theses and Dissertations

Direct numerical simulations (DNS) of an initially quiescent coupled air-water interface driven by an air flow with free stream speed of 5 m/s have been conducted. The DNS solves a scalar advection-diffusion equation for dissolved gas (or scalar) concentration in order to determine the impact of the water-side turbulence on scalar (mass) transfer from the air side to the water side and subsequent vertical transport in the water column. Two simulations are compared: one with a freely deforming interface and a second one with a flat interface. In the first simulation, the deforming interface evolves in the form of gravity-capillary …

The Santa Clara, 2017-11-16, Santa Clara University

The Santa Clara

No abstract provided.

How Aircraft Stability Affects Handling Characteristics And Piloting Techniques, Nihad E. Daidzic

Aviation Department Publications

FAA Safety Seminar (GL1578763) held at Minnesota State University, Mankato, Wiecking Center Auditorium at 18:00 CST on Thursday, November 16, 2017.

Non-Orthogonal Multiple Access In A Mmwave Based Iot Wireless System With Swipt, Haijian Sun, Qun Wang, Shakil Ahmed, Rose Qingyang Hu

Electrical and Computer Engineering Student Research

This paper applies non-orthogonal multiple access (NOMA) and relaying schemes in a mmWave based wireless heterogeneous system that aims to support Internet of Things (IoT) applications. The system consists of high power base stations, low-power relays, and low-power IoT devices. Due to the ad hoc deployment nature of low-power relays, they have very limited access to wireline power charging facilities. Furthermore, IoT devices normally have limited power and short battery life. The study assumes low-power relays and IoT devices are capable of energy harvest functionality. With the help of relays or IoT devices, downlink NOMA transmission consists of two phases. …

Suitability Of River Delta Sediment As Proppant, Missouri And Niobrara Rivers, Nebraska And South Dakota, 2015, Ronald B. Zelt, Christopher M. Hobza, Bethany L. Burton, Nathaniel J. Schaepe, Nadine M. Piatak-Hackley

United States Geological Survey: Water Reports and Publications

Document abstract

Sediment management is a challenge faced by reservoir managers who have several potential options, including dredging, for mitigation of storage capacity lost to sedimentation. As sediment is removed from reservoir storage, potential use of the sediment for socioeconomic or ecological benefit could potentially defray some costs of its removal. Rivers that transport a sandy sediment load will deposit the sand load along a reservoir-headwaters reach where the current of the river slackens progressively as its bed approaches and then descends below the reservoir water level. Given a rare combination of factors, a reservoir deposit of alluvial sand has …

Compact And Wideband Mmic Phase Shifters Using Tunable Active Inductor Loaded All-Pass Networks, David M. Zaiden

USF Tampa Graduate Theses and Dissertations

This dissertation addresses the design of monolithically integrated phase shifters at S- and L- frequency bands using a commercially available GaAs process from Triquint. The focus of the design is to operate over a wide bandwidth with full 360° phase shift capability, 50 Ω input/output impedance match and low RMS phase and gain errors. The first version of the design is based on passive all-pass phase shifters integrated with wideband amplifiers to compensate for insertion loss. This design uses a 4-bit system to achieve the required phase shift and each bit consists of 3 sections of all-pass filters designed at …

New Multi-Resolution Shortest-Path Navigation Techniques Using The Ndvi Imagery, Rui Tian

LSU Master's Theses

In this thesis work, we study the visible-light and near-infrared images for practical applications. Different colormaps, contours, or pixel-based indicators can be extracted from these optical images. Among them, normalized difference vegetation index (NDVI) has been widely utilized for applications in vegetation-health monitoring, geological survey, and climate forecast, etc. recently. We extend the use of NDVI for the navigation over the uncharted geographical areas. Henceforth, we propose a new algorithm which is called multi-resolution Dijkstra algorithm to find the approximate shortest paths within the large planar graphs representing the real terrains.

The outline of this thesis is briefed as follows. …

High-Throughput Droplet Barcoding And Automated Image Analysis In Microfluidic Droplet Trapping Array, Manibarathi Vaithiyanathan

LSU Master's Theses

Molecularly-targeted therapeutics and personalized medicine have dramatically increased the median survival rate of patients suffering from cancer. However, cellular heterogeneity and the personalized nature of cancer have resulted in the limited success of single drug treatments which has led to the use of multiple therapeutic combinations. This has required the development of new analytical methods capable of multiplexed high-throughput screening (HTS) technologies necessary to identify is single or multi-agent therapies are effective in ex vivo samples like liquid biopsies. Droplet microfluidic devices have garnered significant interest to facilitate high-throughput, single cell analysis of heterogeneous populations. However, these devices are still …

Document Clustering, David Anastasiu, Andrea Tagarelli

Faculty Publications

In a world flooded with information, document clustering is an important tool that can help categorize and extract insight from text collections. It works by grouping similar documents, while simultaneously discriminating between groups. In this article, we provide a brief overview of the principal techniques used to cluster documents, and introduce a series of novel deep-learning based methods recently designed for the document clustering task. In our overview, we point the reader to salient works that can provide a deeper understanding of the topics discussed.

Her Path To Success: Usu’S Rose Hu Is A Leader In Tech | College Of Engineering, Usu College Of Engineering

College of Engineering News

Growing up in China’s Jiangsu province, Rose Hu was a shy girl who studied hard and looked up to her four older siblings.

Physical Layer Algorithms For Reliability And Spectral Efficiency In Wireless Communications, Zekeriyya Esat Ankarali

USF Tampa Graduate Theses and Dissertations

Support of many different services, approximately 1000x increase of current data rates, ultra-reliability, low latency and energy/cost efficiency are among the demands from upcoming 5G standard. In order to meet them, researchers investigate various potential technologies involving different network layers and discuss their trade-offs for possible 5G scenarios. Waveform design is a critical part of these efforts and various alternatives have been heavily discussed over the last few years. Besides that, wireless technology is expected to be deployed in many critical applications including the ones involving with daily life activities, health-care and vehicular traffic. Therefore, security of wireless systems is …

The Inverse Kinetics Method And Its Application To The Annular Core Research Reactor, Thomas A. Ball

Nuclear Engineering ETDs

The inverse kinetics method, is a method to calculate a reactor’s reactivity profile from its power profile. In this thesis, the reactivity profile corresponding to pulse operations of the Annular Core Research Reactor (ACRR) was sought. Of specific interest was the shutdown reactivity of the reactor following the pulse. This required accounting for delayed beryllium photoneutrons that are present in the ACRR in addition to U-235 delayed neutron precursors. The power profiles of the pulses were experimentally measured using a diamond photoconductive detector (PCD). Using the inverse kinetics equation, a computer code was written to numerically calculate the reactivity corresponding …

Applying Modern Technology In The Preservation Of Historic Concrete Picnic Tables, Michele M. Anderson

Civil Engineering ETDs

Preserving historical concrete structures recognizes the work and skills of past generations and allows the communities surrounding these pieces of history the opportunity to enjoy the character and purpose of their construction. Restoration of concrete picnic tables, constructed in the 1930s by the Civilian Conservation Corps, required researching materials and methods of construction during the original construction period. Eight decades of environmental and weather cycles did not decay the historic structures. Acts of vandalism destroyed the purpose of the tables and benches. Restoration of the historic picnic tables required extensive literature review for the materials and methods used during the …

Hydrogeochemical Investigation Of Recharge Pathways To Intermediate And Regional Groundwater In Cañon De Valle And Technical Area 16, Los Alamos National Laboratory, Brendan W. Brady

Civil Engineering ETDs

In aquifers consisting of fractured or porous igneous rocks, as well as conglomerate and sandstone products of volcanic formations, silicate minerals actively dissolve and precipitate (Eby, 2004; Eriksson, 1985; Drever, 1982). Dissolution of hydrated volcanic glass is also known to influence the character of groundwater to which it is exposed (White et al., 1980). Hydrochemical evolution, within saturated zones of volcanic formations, is modeled here as a means to resolve the sources feeding a perched groundwater zone. By observation of solute mass balances in groundwater, together with rock chemistry, this study characterizes the chemical weathering processes active along recharge pathways …

Integration Of Thin Film Tpv Cells To Cvd Diamond Heat Spreaders, Emma J. Renteria

Electrical and Computer Engineering ETDs

In this work, techniques to isolate thermophotovoltaic (TPV) devices from the growth substrate and their subsequent integration with Chemical Vapor Deposition (CVD) diamond heat spreaders will be discussed, with the envisioned goal of fabricating thermally managed cells. CVD diamond heat spreaders are a great option for thermal management of TPV cells. The key requirement, however, is the bonding of the TPV cell directly onto the diamond wafer without the presence of thick (>350 μm) growth substrates, which can offer significant thermal resistance.

The first approach is to release GaSb epitaxial layers from GaSb substrates. However, this is challenging due …

Investigating Scalable Manufacturing Of High-Conductivity Wires And Coatings From Ultra-Long Carbon Nanotubes, Pouria Khanbolouki

Mechanical Engineering ETDs

Carbon nanotubes (CNTs) are a promising candidate for next generation of electrical wirings and electromagnetic interference (EMI) shielding materials due to their exceptional mechanical and electrical properties. Wires and coatings from ultralong nanotubes that are highly crystalline, well-aligned and densely packed can achieve this goal. High-performance CNT conductors will be relatively lightweight and resistant to harsh conditions and therefore can potentially replace current conductors in many industries including aerospace, automotive, gas and oil.

This thesis investigates a new manufacturing approach, based on conventional solution coating and wire drawing methods, to fabricate high conductivity wires and coatings from ultra-long carbon nanotubes. …

Effect Of Alignment, Sizing, And Manufacturing Method On Mechanical Properties Of Recycled Carbon Fiber Composites, Nekoda Van De Werken

Mechanical Engineering ETDs

The exceptional combination of properties offered by carbon fiber composites has propelled their incorporation into high performance markets such as aerospace, wind energy, luxury cars and sporting goods. While the use of carbon fiber in these sectors is expected to continue to increase, the high price and energy cost associated with carbon fiber production acts as a significant barrier of entry into larger volume markets, such as the automotive industry. One method of navigating this transition is through the use of recycled carbon fiber composites.

Carbon fiber reclamation can produce fibers with up to 90% and 100% of the strength …

Nonlinear Model-Based Control For Neuromuscular Electrical Stimulation, Ruzhou Yang

LSU Doctoral Dissertations

Neuromuscular electrical stimulation (NMES) is a technology where skeletal muscles are externally stimulated by electrodes to help restore functionality to human limbs with motor neuron disorder. This dissertation is concerned with the model-based feedback control of the NMES quadriceps muscle group-knee joint dynamics. A class of nonlinear controllers is presented based on various levels of model structures and uncertainties. The two main control techniques used throughout this work are backstepping control and Lyapunov stability theory.

In the first control strategy, we design a model-based nonlinear control law for the system with the exactly known passive mechanical that ensures asymptotical tracking. …

Modeling Of A Battery Storage System On A Distribution Feeder, Aaron M. Griego

Electrical and Computer Engineering ETDs

Driven by the need to reduce harmful emissions and the desire to move away from our dependency on fossil fuels, we have seen a sharp increase in alternative energy research and development within the last decade. Amongst the many alternative energy sources, photovoltaics (PV) is becoming more commonplace in the power utility system.

With these new sources of renewable energy being widely adopted, there are causes for concern that power utility companies must address. One of the more present issues that have been noted is the reliability of the power being delivered; in particular with PV systems. Studies have shown …

High Power Microwave Metamaterial Based Passive And Active Devices, Hamide Seidfaraji

Electrical and Computer Engineering ETDs

The goal of this dissertation is to design novel metamaterials for High Power Microwave devices. Metamaterials (MTM) are artificial periodic structures, which support reversed Cherenkov radiation and backward wave propagation. Microwave sources transform the kinetic energy of an electron beam into microwaves through the interaction of the electrons with a periodic slow wave structures (SWS). Here, a metamaterial (MTM) waveguide is proposed for use in a microwave oscillator instead of a SWS. The interaction of a multi-beam cathode with a set of MTM structures inside a cylindrical waveguide is studied and analyzed.

Group theory is used to design a metamaterial …

Manipulating Electromagnetic Waves With Enhanced Functionalities Using Nonlinear And Chiral Metamaterials, Sinhara Rishi Malinda Silva

USF Tampa Graduate Theses and Dissertations

Metamaterials are artificial structures, which periodically arranged to exhibit fascinating electromagnetic properties, not existing in nature. A great deal of research in the field of metamaterial was conducted in a linear regime, where the electromagnetic responses are independent of the external electric or magnetic fields. Unfortunately, in linear regime the desired properties of metamaterials have only been achieved within a narrow bandwidth, around a fixed frequency. Therefore, nonlinearity is introduced into metamaterials by merging meta-atoms with well-known nonlinear materials. Nonlinear metamaterials are exploited in this dissertation to introduce and develop applications in microwave frequency with broadband responses. The nonlinearity was …

A Comparison Of Sensitivity Metrics For Two-Stage Ignition Behavior In Rapid Compression Machines, David Wilson, Casey Allen

Mechanical Engineering Faculty Research and Publications

A rapid compression machine (RCM) multi-zone model is used to simulate the ignition of primary reference fuel (PRF) mixtures that exhibit two-stage ignition behavior. Sensitivity coefficients for each reaction in the PRF mechanism are calculated from four different metrics: (1) first-stage energy release, (2) first-stage pressure rise, (3) first-stage ignition delay time, and (4) total ignition delay time. The sensitivity coefficients are used to provide four unique rankings, and the rankings are compared using Spearman’s rank correlation coefficient. Special emphasis is given to comparing the rankings based on first-stage energy release and total ignition delay time. The level of agreement …

Design And Modeling Of A High-Power Periodic Spiral Antenna With An Integrated Rejection Band Filter, Jonathan M. O'Brien

USF Tampa Graduate Theses and Dissertations

This work details the design and fabrication of an ultra-wideband periodic spiral antenna (PSA) with a notch filter embedded directly into the radiating aperture. Prototype fabrication of the PSA reveals long assembly time due to forming the antenna element, therefore modifications are made to allow fabricating the antenna elements on a thin, flexible, Polyimide substrate. A transmission line model is develop to support the updated configuration of the antenna elements. In addition, a symmetric spurline filter is integrated into the arms of the spiral antenna in order to address the common problem of interference in ultra-wideband systems. For the first …

Mechanistic Modeling Of Nanoparticle-Stabilized Supercritical Co2 Foams And Its Implication In Field-Scale Eor Applications, Doris Patricia Ortiz Maestre

LSU Master's Theses

Previous experimental studies show that nanoparticle-stabilized supercritical CO₂ foams (or, NP CO₂ foams) can be applied as an alternative to surfactant foams, in order to reduce CO₂ mobility in gas injection enhanced oil recovery (EOR). These nanoparticles, if chosen correctly, can be an effective foam stabilizer attached at the fluid interface in a wide range of physicochemical conditions.

By using NP CO₂ foam experiments available in the literature, this study performs two tasks: (i) presenting how a mechanistic foam model can be used to fit experimental data and determine required model parameters, and (ii) investigating the …

State-Based Peridynamic Particle Method, Siavash Nikravesh Kazeroni

Civil Engineering ETDs

In this study, a novel discrete Peridynamics framework called the “State-Based Peridynamic Particle Model (SPPM)” is introduced. In this approach, a solid body is simulated by neither solving differential equations nor integral equations; instead, the simulation is accomplished by directly solving discrete systems of equations using finite summations. SPPM is formulated for a random distribution of particles, hence, it can be considered as a meshfree method. The assumptions of continuity and homogeneity are not necessary for this approach. The SPPM is a generalization of the “State-Based Peridynamic Lattice Model (SPLM)”. In the SPLM formulation, for sake of simplicity and computational …

Evaluation Of Energy Released From Nuclear Criticality Excursions In Process Solutions, Corey Michael Skinner

Nuclear Engineering ETDs

Typically, the staff of a nonreactor nuclear facility or a processing facility involving nuclear material are not expected to have a strong technical background in nuclear criticality physics, as that is not the purpose of these sites, yet handle material with the potential to undergo a criticality excursion. Such excursions have occurred 22 times in the past, 21 of which involved an aqueous solution material. Therefore, it would be useful to have a general model capable of providing a quick estimation of the consequences of a criticality excursion in a processing plant. To this end, correlations developed utilizing experimental data …

Both Adhe And A Separate Nadph-Dependent Alcohol Dehydrogenase Gene, Adha, Are Necessary For High Ethanol Production In Thermoanaerobacterium Saccharolyticum, Tianyong Zheng, Daniel G. Olson, Sean J. Murphy, Xiongjun Shao, Liang Tian, Lee Lynd

Dartmouth Scholarship

Thermoanaerobacterium saccharolyticum has been engineered to produce ethanol at ∼90% theoretical yield and titer of 70 g/L. Its ethanol-producing ability has drawn attention to its metabolic pathways, which could potentially be transferred to other organisms of interest. Here we report that the iron-containing AdhA is important for ethanol production in the high-ethanol strain of T. saccharolyticum (LL1049). A single-gene deletion of adhA in LL1049 reduced ethanol production by ∼50%, whereas multiple gene deletions of all annotated alcohol dehydrogenases except adhA and adhE did not affect ethanol production. Deletion of adhA in wild-type T. saccharolyticum reduced NADPH-linked ADH activity (acetaldehyde-reducing) by …

Growth, Characterization, And Function Of Ferroelectric, Ferromagnetic Thin Films And Their Heterostructures, Mahesh Hordagoda

USF Tampa Graduate Theses and Dissertations

With recent trends in miniaturization in the electronics sector, ferroelectrics have gained popularity due to their applications in non-volatile RAM. Taking one step further researchers are now exploring multiferroic devices that overcome the drawbacks of ferroelectric (FE) and ferromagnetic (FM) RAM’s while retaining the advantages of both. The work presented in this dissertation focuses on the growth of FE and FM thin film structures. The primary goals of this work include, (1) optimization of the parameters in the pulsed laser deposition (PLD) of FE and FM films and their heterostructures, (2) development of a structure-property relation that leads to enhancements …

Experimental Study Of High-Temperature Range Latent Heat Thermal Energy Storage, Chatura Wickramaratne

USF Tampa Graduate Theses and Dissertations

Among all thermal energy storage (TES) systems, latent heat thermal energy storage (LHTES) attracts high interest due to its high energy density and high exergetic efficiency. Due to the high enthalpy of fusion and low cost, inorganic salts are becoming popular as phase change materials and are used as the storage media in LHTES systems. The main drawbacks for the inorganic salts are their low thermal conductivity and high reactivity above 500°C. Therefore, designing a cost-effective containment at these conditions with longevity is a challenge. Macro-encapsulation of the PCM is one way to solve both the PCM containment issue as …