Engineering Commons^™

Influence Of Overlay Thickness On Interface Bonding, Aliasghar Dormohammadi

Open Access Theses & Dissertations

Overlaying is an efficient and proven pavement preservation approach for flexible pavements. The overlay thickness varies from 1 in. to 4 in. depending on the conditions of the existing pavement, financial resources, etc. In the recent decade, financial constraints in conjunction with the push for pavement preservation, the overlay thickness is being reduced to less than an in. The ultra-thin overlay is a new cost-effective method that can be used to preserve functional pavement problems and provide satisfactory ride quality. Although studies have been conducted to evaluate pavement systems using numerical simulation, the research in the area of evaluating existing …

Trend Analysis In Rainfall, Reference Evapotranspiration And Aridity Index In Southern Senegal: Adaptation To The Vulnerability Of Rainfed Rice Cultivation To Climate Change, Komlan Koudahe, Koffi Djaman, Ansoumana Bodian, Suat Irkmak, Mamadou Sall, Lamine Diop, Alpha B. Balde, Daran Rudnick

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Rainfall and evapotranspiration are two vital elements for food production under rainfed agriculture. This study aims at investigating the combined changes in these variables in the form of aridly index in the southern Senegal. The temporal trends in annual and monthly (from May to October) aridity index, rainfall and evapotranspiration are examined and adaptation strategies to the vulnerability of rainfed rice cultivation to the changes are developed. The results show a significant decreasing trend in annual rainfall at all study locations for the period 1922-2015. When analyzing the trends in sub-periods, there are two clear patterns in the annual rainfall …

Carbon Nanotube/Polymer Composite Membrane For Co2 Capture, Pacharaporn Yaisanga

Chulalongkorn University Theses and Dissertations (Chula ETD)

Membrane gas absorption (MGA) was applied for carbon dioxide capture due to its unique potential, such as independent adjustment of gas and liquid, compact equipment installation, and sizable module. However, a major issue of MGA is membrane wetting, causing lower absorption efficiency and membrane damages. Hydrophobicity is one of the key parameters to improve membrane property for solving such problem. This thesis focused on using carbon nanotubes as the filler to composite with polyacrylonitrile (PAN) or polyvinylidene fluoride (PDVF) via a phase inversion technique to improve membranes hydrophobicity. In case of PAN, the results showed that the addition of CNT …

Novel Shape Memory Polymer From Bio-Based Polybenzoxazine/Bio-Based Epoxy Copolymers, Phakakrong Hombunma

Chulalongkorn University Theses and Dissertations (Chula ETD)

Shape memory polymers (SMPs) are known as smart polymer materials which can be deformed and fixed in a temporary shape and can recover to its original shape upon an external stimulus such as temperature which is the main stimulus for general SMPs. In this research, a renewable natural resource based on vanillin-furfurylamine benzoxazine (V-fa) and eugenol-furfurylamine benzoxazine (E-fa) are developed to substitute the use of petroleum based polybenzoxazine. The as-synthesized V-fa and E-fa show the degradation temperature at 5% weight loss to be as high as 343 and 310°C and char content to be 66 and 54%, respectively. Effects of …

Travel Time Estimation And Prediction For Urban Arterial Roads, Porntep Puangprakhon

Chulalongkorn University Theses and Dissertations (Chula ETD)

Travel time information has been accepted as the core of advanced traveler information systems (ATIS) and advanced traffic management systems (ATMS). Providing the accurate travel time information to traffic operators and travelers allows them to make informed decisions, leading to more advantage for individual road users and the entire transportation system. Most of the traffic information providers normally deliver the current traffic conditions or current travel times to public assuming the state of traffic remains constant in the near future. Aimed at the more effective applications, short-term future traffic conditions have been proposed as a valuable piece of information in …

Prototype Development Of Small Scale Transportable Fuel Production System For Agricultural Byproducts, Jurarat Nisamaneenate

Chulalongkorn University Theses and Dissertations (Chula ETD)

The objective is to study the potential of peanut shell waste and cassava rhizome conversion using a modular fixed bed gasifier coupled with thermal integration unit. The thermal integration unit improved gasification reaction in which lower tar content and high gas production efficiency can be achieved. The air flow rate had integrated effects on product yield and composition; higher air flow rate resulted in higher gas yield with less tar and char. The result from peanut shell gasification indicated the optimal conditions without catalyst addition at air flow rate of 3.06 m3/hr where carbon and hydrogen conversions were 87.10% and …

A Comparison On The Classification Of Short-Text Documents Using Latent Dirichlet Allocation And Formal Concept Analysis, Noel Rogers, Luca Longo

Books/Book Chapters

With the increasing amounts of textual data being collected online, automated text classification techniques are becoming increasingly important. However, a lot of this data is in the form of short-text with just a handful of terms per document (e.g. Text messages, tweets or Facebook posts). This data is generally too sparse and noisy to obtain satisfactory classification. Two techniques which aim to alleviate this problem are Latent Dirichlet Allocation (LDA) and Formal Concept Analysis (FCA). Both techniques have been shown to improve the performance of short-text classification by reducing the sparsity of the input data. The relative performance of classifiers …

Energy Management System Considering Battery Lifetime, Prajina Tandukar

Electronic Theses and Dissertations

The contribution of renewable energy resources in the global energy generation has been increasing at a fast pace. Variability and uncertainty are the two main issues related to renewable energy integration. Thus, energy storage systems (ESSs) are used in such systems to smooth the power generated by the renewable energy sources. In order to ensure reliable and economic operation of the system, energy management system (EMS) is implemented to control the dispatch of the available resources. ESS such as a battery requires significant capital investment and frequent replacement. A battery has a maximum lifetime called float life, regardless of energy …

Cellulose Nanocrystal Stabilized Pickering Emulsions, Sangeet Adhikari

Honors Theses

The use of Pickering Emulsions in place of conventional surfactants has opened new doors in fields like pharmacy, cosmetology, and oil and gas industry. Pickering emulsions using Cellulose Nanocrystals (CNCs) are generally stable to heating in a wide range of temperatures and show great stability against salt and pH changes. The management of water resources in the United States has been a challenge. The injection of water in aging oil fields and unconventional tight-gas, shale-gas, and coal bed-fields often generate substantial amounts contaminated wastewater. This research project is expected to help future efforts in promoting oil biodegradation in emulsified mixtures. …

Biochemical Variation In Caribbean Sponges Of The Genus Aplysina, Sarah L. Criddle

Honors Theses

Sponges are among the simplest multicellular organisms, consisting of groupings of cells with similar functions rather than true tissues. Nonetheless, sponges are ecologically significant in many marine environments, including coral reefs. They are sedentary organisms that feed by filtration from the water column, which contributes to the numerous roles they play on coral reefs, including upkeep of the reef, production of usable energy, and recycling of nutrients. Like all multicellular organisms, sponges are made up of biologically significant macromolecules. These macromolecules provide the energy for the sponge, and their relative concentrations determine how sponges can store and access the energy …

Portable Bio-Signal Data Logger, Suprabh Singh

Honors Theses

Increased involvement of Data Acquisition in current world research has pushed the requirements of data acquisition systems. This is particularly true in Biomedical engineering, where portable, light and easily accessible DAQ systems are needed. These systems should be light so that they can be wore on the body and should have long battery life where it can be powered all day for comprehensive research data. Under my honor thesis, we designed a portable DAQ which can record the data on eight channel simultaneously for minimum of 6 hours. Comparing to the present market option for portable DAQ, this system is …

Pens Up! The Development Of The Ole Miss Ballpoint Pen, Vera M. Gardner, Andrew M. Huff, Charles B. Mceuen

Honors Theses

This thesis will document and analyze the ideation, research and design, production, and optimization processes for the Center for Manufacturing Excellence Senior Capstone design project. The Pens Up! team consisted of six team members- four mechanical engineering majors, one accounting major, and one business major- working together to continuously improve the Ole Miss ballpoint pen's quality, design, and to standardize and eliminate wastes to its production process. After months of preparing and testing various ideas and ironing out kinks and mistakes, Pens Up! was able to produce a quality aluminum pen. This thesis will describe the various obstacles faced as …

Evaluation Of Sigma Ligand Az66 Analgesic Potentiation Of Cannabinoids, Jacqueline Morris

Honors Theses

Sigma receptors have become a popular subject for research the past few decades, but there is still much mystery behind these receptors and how they work. Sigma receptors, like cannabinoid-1 (CB1) receptors, have effects on the human body including appetite regulation, depression, and analgesia. AZ66 is a highly selective sigma receptor ligand that has antagonistic properties. Sigma receptor antagonists have been shown to potentiate the analgesic effects of opiates; however, there are no known literature reports about the interaction between the sigma receptor system and the endocannabinoid system, including CB1 receptors. The purpose of this study is to evaluate AZ66 …

The Effect Of Golf Shoe Characteristics On Static Balance Over An Extended Duration, Jordan Colbert

Honors Theses

Golf performance is greatly impacted by balance ability, specifically during a golfer's swinging and putting motion. Previous studies have found that certain shoe characteristics can affect balance; however, no such study has been conducted for golf shoes. This study's objective was to compare balance scores between three different golf shoe styles and determine which style or characteristics serve golfers best in improving balance under quiet standing conditions over time. Twelve adults (age: 23.4 ± 2.2 years; height: 181.5 ± 9.0 cm; mass: 95.8 ± 18.6 kg) participated in this study. Each participant made four visits, one for each footwear condition: …

Dynamic Testing Of Bovine Cortical Bone, Kenton Wong

Honors Theses

Bone is the primary structural element of mammalian animals. It plays a critical role in support, strength, and resilience, and has been the subject of many investigations into its material properties. The high strain rate behavior of bone has remained relatively unexplored, however, and its properties under dynamic loads perpendicular to the diaphysis of the bone are somewhat poorly understood. Bone is an anisotropic material and displays different properties depending on its orientation during testing. It is known that bone is weaker under a compressive load in the transverse direction, but the relationship has not been tested at high strain …

Impacts Of Aplysina Red Band Syndrome On Secondary Metabolite Profiles And Antibacterial Activity Of The Caribbean Sponge Genus Aplysina, Mafie Claire Vickers

Honors Theses

Coral reef ecosystems continue to decline due to abiotic and biotic factors, including disease. Although much of the existing scientific literature has focused on coral diseases, reports of sponge diseases have been increasing. This is a cause for concern, as sponges are increasingly dominant components of coral reef communities, where they are responsible for a wide range of ecological functions. A sponge disease of particular interest is Aplysina Red Band Syndrome (ARBS), which impacts the Caribbean's most abundant genus of sponges, Aplysina. Three morphotypes of branching sponges within this genus are affected, including Aplysina fulva, and the thin and thick …

Synthesis And Biological Evaluation Of Cannabinoid Receptor Ligands, Mariah Leigh Cole

Honors Theses

The cannabinoid receptors, members of the G-protein coupled receptor (GPCR) superfamily, have been implicated in numerous human physiological functions and diseases. These receptors, cannabinoid type 1 (CB1) and cannabinoid type 2 (CB2), are most concentrated in the central nervous system and immune cells, respectively, and have each become a target of therapeutic interest. Dual CB1/CB2 agonists such as delta-9-tetrahydrocannbinol (THC) have demonstrated efficacy in the treatment of nausea, pain, and glaucoma, but suffer from psychotropic effects mediated by CB1, motivating the search for CB2 selective therapeutic agents. Selective modulation of the CB2 receptor has therapeutic potential in human health disorders …

Influence Of Small Particles Inclusion On Selective Laser Melting Of Ti-6al-4v Powder, Haijun Gong, J. J.S. Dilip, Li Yang, Chong Teng, Brent Stucker

Manufacturing Engineering: Faculty Publications (2015-2023)

The particle size distribution and powder morphology of metallic powders have an important effect on powder bed fusion based additive manufacturing processes, such as selective laser melting (SLM). The process development and parameter optimization require a fundamental understanding of the influence of powder on SLM. This study introduces a pre-alloyed titanium alloy Ti-6Al-4V powder, which has a certain amount of small particles, for SLM. The influence of small particle inclusion is investigated through microscopy of surface topography, elemental and microstructural analysis, and mechanical testing, compared to the Ti-6Al-4V powder provided by SLM machine vendor. It is found that the small …

Anisotropic Character Of Low-Order Turbulent Flow Descriptions Through The Proper Orthogonal Decomposition, Nicholas Hamilton, Murat Tutkun, Raúl Bayoán Cal

Mechanical and Materials Engineering Faculty Publications and Presentations

Proper orthogonal decomposition (POD) is applied to distinct data sets in order to characterize the propagation of error arising from basis truncation in the description of turbulence. Experimental data from stereo particle image velocimetry measurements in a wind turbine array and direct numerical simulation data from a fully developed channel flow are used to illustrate dependence of the anisotropy tensor invariants as a function of POD modes used in low-order descriptions. In all cases, ensembles of snapshots illuminate a variety of anisotropic states of turbulence. In the near wake of a model wind turbine, the turbulence field reflects the periodic …

Fault Location In Transmission Systems Using Synchronized Measurements, Xiangqing Jiao

Theses and Dissertations--Electrical and Computer Engineering

Compared with conventional measurements from supervisory control and data acquisition (SCADA) system, phasor measurement units (PMUs) provide time-synchronized and direct measurements of phasors. The availability of synchronized phasor measurements can significantly improve power system protection and analysis. This dissertation is specifically committed to using synchronized measurements for estimation of fault locations in transmission systems.

Transmission lines are prone to various short-circuit faults. Accurate fault location is critical for rapid power recovery. Chapter 2 proposes a new fault location method based on sparse wide area measurements. One distinguishing feature of this method is its applicability to both transposed and untransposed transmission …

Iot Development For Healthy Independent Living, Shalom Greene

Theses and Dissertations--Electrical and Computer Engineering

The rise of internet connected devices has enabled the home with a vast amount of enhancements to make life more convenient. These internet connected devices can be used to form a community of devices known as the internet of things (IoT). There is great value in IoT devices to promote healthy independent living for older adults.

Fall-related injuries has been one of the leading causes of death in older adults. For example, every year more than a third of people over 65 in the U.S. experience a fall, of which up to 30 percent result in moderate to severe injury. …

Novel Resource Efficient Circuit Designs For Rebooting Computing, Sai Subramanya Varun Thogarcheti

Theses and Dissertations--Electrical and Computer Engineering

CMOS based computing is reaching its limits. To take computation beyond Moores law (the number of transistors and hence processing power on a chip doubles every 18 months to 3 years) requires research explorations in (i) new materials, devices, and processes, (ii) new architectures and algorithms, (iii) new paradigm of logic bit representation. The focus is on fundamental new ways to compute under the umbrella of rebooting computing such as spintronics, quantum computing, adiabatic and reversible computing. Therefore, this thesis highlights explicitly Quantum computing and Adiabatic logic, two new computing paradigms that come under the umbrella of rebooting computing. Quantum …

Test 2183: Claas Axion 880, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Stored Grain Volume Measurement Using A Low Density Point Cloud, Aaron P. Turner, Joshua J. Jackson, Nicole K. Koeninger, Samuel G. Mcneill, Michael D. Montross, Mark E. Casada, Josephine M. Boac, Rumela Bhadra, Ronaldo G. Maghirang, Sidney A. Thompson

Biosystems and Agricultural Engineering Faculty Publications

This technical note presents the development of a new apparatus and data processing method to accurately estimate the volume of stored grain in a bin. Specifically, it was developed to account for the variability in surface topography that can occur in large diameter bins when partially unloaded. This was accomplished using a laser distance meter to create a low density point cloud, from which a surface was interpolated using ArcMap geoprocessing tools. The manually controlled and portable system was designed to hold the laser distance meter and provided a common reference point. The data from the laser distance meter was …

Fourth-Generation Fan Assessment Numeration System (Fans) Design And Performance Specifications, Michael P. Sama, George B. Day, Laura M. Pepple, Richard S. Gates

Biosystems and Agricultural Engineering Faculty Publications

The Fan Assessment Numeration System (FANS) is a measurement device for generating ventilation fan performance curves. Three different-sized FANS currently exist for assessing ventilation fans commonly used in poultry and livestock housing systems. All FANS consist of an array of anemometers inside an aluminum shroud that traverse the inlet or outlet of a ventilation fan. The FANS design has been updated several times since its inception and is currently in its fourth-generation (G4). The current design iteration (FANS-G4) is reported in this article with an emphasis on the hardware and software control, data acquisition systems, and operational reliability. Six FANS-G4 …

A Method For Reflectance Index Wavelength Selection From Moisture-Controlled Soil And Crop Residue Samples, Ali Hamidisepehr, Michael P. Sama, Aaron P. Turner, Ole O. Wendroth

Biosystems and Agricultural Engineering Faculty Publications

Reflectance indices are a method for reducing the dimensionality of spectral measurements used to quantify material properties. Choosing the optimal wavelengths for developing an index based on a given material and property of interest is made difficult by the large number of wavelengths typically available to choose from and the lack of homogeneity when remotely sensing agricultural materials. This study aimed to determine the feasibility of using a low-cost method for sensing the moisture content of background materials in traditional crop remote sensing. Moisture-controlled soil and wheat stalk residue samples were measured at varying heights using a reflectance probe connected …

Evaluating A New Shade For Feedlot Cattle Performance And Heat Stress, Morgan D. Hayes, Tami M. Brown-Brandl, Roger A. Eigenberg, Larry A. Kuehn, R. Mark Thallman

Biosystems and Agricultural Engineering Faculty Publications

Heat stress in cattle results in decreased feed intake, lower daily gain, and potentially death in susceptible animals under intense conditions. A study was carried out during the summer of 2013 at the USDA-ARS U.S. Meat Animal Research Center feedlot evaluating the impact of shade on environmental conditions and cattle performance. A novel two-tiered shade was used in half of the 14 pens, each holding 30 animals. The shades were designed to reduce solar heat load by 40% to 60% and to provide traveling shade across the pen, providing varied amounts of shade area as well as varied solar reduction …

Equilibrium Moisture Content Of Kabuli, Chickpea, Black Sesame, And White Sesame Seeds, Paul R. Armstrong, Elizabeth B. Maghirang, Bhadriraju Subramanyam, Samuel G. Mcneill

Biosystems and Agricultural Engineering Faculty Publications

Sesame and chickpea are important crops in Ethiopia because both are major export crops that generate much revenue for both small farmers and the country as a whole. However, there is a lack of information about the fundamental equilibrium moisture content (EMC) relationships among these crops, which would help facilitate better monitoring and storage. Therefore, EMC adsorption and desorption prediction models based on temperature (T) and relative humidity (RH) were developed for the modified Chung-Pfost and modified Henderson models for Kabuli chickpea (KC), black sesame (BS), and white sesame (WS) seeds. The samples for conducting the adsorption and desorption tests …

Toward Biochemical Conversion Of Lignocellulose On-Farm: Pretreatment And Hydrolysis Of Corn Stover In Situ, Alicia A. Modenbach, Sue E. Nokes, Michael D. Montross, Barbara L. Knutson

Biosystems and Agricultural Engineering Faculty Publications

High-solids lignocellulosic pretreatment using NaOH followed by high-solids enzymatic hydrolysis was evaluated for an on-farm biochemical conversion process. Increasing the solids loadings for these processes has the potential for increasing glucose concentrations and downstream ethanol production; however, sequential processing at high-solids loading similar to an on-farm cellulose conversion system has not been studied. This research quantified the effects of high-solids pretreatment with NaOH and subsequent high-solids enzymatic hydrolysis on cellulose conversion. As expected, conversion efficiency was reduced; however, the highest glucose concentration (40.2 g L^-1), and therefore the highest potential ethanol concentration, resulted from the high-solids combined pretreatment …

Wavelength Drift In Cwdm Systems: Impact And Measurement, Thomas Freir

Masters

The research begins with an investigation of wavelength drift in Coarse Wavelength Division Multiplexing (CWDM) systems, especially in the context of temperature dependent wavelength drift. A simple model was proposed using a typical ‘application’ from ITU-T G.695. OptiSystem was chosen as the simulation platform due to its ease of use, the variety and flexibility of its inbuilt components and similar models simulated on the platform in the past. The research then investigates the measurement of wavelength drift focusing on how to determine an acceptable wavelength accuracy for a CWDM wavelength monitor. The chosen approach arose from observations of the results …