Engineering Commons^™

Hydrogeochemical Controls On Reactive And Nonreactive Solute Transport In Heterogenous Porous Media, Mahta Gholizadeh Ansari

Masters Theses

"This work examines how physical and chemical heterogeneity can affect reactive and non-reactive transport in porous media. The effect of heterogeneity of the porous media is investigated both on dissolution rate of magnesite and attenuation time of nonreactive contaminants in non-reactive media. Various spatial distribution were created using statistical parameters in PETREL.A total of 6793 transport modeling simulations were run using CrunchFlow. Lasso regression was used to select most significant features and those features are then used in linear regression and deep learning models.

The magnesite dissolution simulations were performed under different permeability ratios (magnesite /sand permeability) and inlet pH. …

Application Of Millimeter-Wave Differential Probe For Crack Detection On Riveted Structures, Kuang Ping Ying

Masters Theses

"This thesis proposes the use of a W-band wideband differential probe for crack detection on riveted structures, such as aircraft fuselage lap joints. Detection of crack at its early stage (surface-breaking) is particularly important to prevent the development of a fatigue crack. This probe utilizing millimeter-wave frequencies serves as a viable candidate on detecting surface-breaking cracks, as it can be employed in measurements in a non-contact fashion, while allowing for high spatial-resolution images and the abilities to penetrate through dielectric materials (paint), making it attractive for detecting small cracks. In previous works, a V-band differential probe has shown promise for …

Study Of Surface Complexation And Mineral Dissolution During Water-Rock Interaction In High Salinity Waterflooding At Elevated Temperatures, Sameer Salasakar

Masters Theses

"High salinity waterflooding for carbonate reservoirs is efficient and cheap method used for improved oil recovery. Various mechanisms have been proposed including adsorption/desorption on rock surface, mineral dissolution and precipitation, multicomponent ion exchange, interfacial tension reduction, fine migration and double layer expansion. These all process alter the wettability which leads to improved oil recovery.

Objective of this study was to understand processes that occur during water-rock interaction when high salinity water is flooded into the reservoir. In this work, effect of temperature on water-rock interaction is studied along with effect of pH and specific surface areas of calcite at normal …

Analysis Of Outsourcing Data To The Cloud Using Autonomous Key Generation, Mortada Abdulwahed Aman

Masters Theses

"Cloud computing, a technology that enables users to store and manage their data at a low cost and high availability, has been emerging for the past few decades because of the many services it provides. One of the many services cloud computing provides to its users is data storage. The majority of the users of this service are still concerned to outsource their data due to the integrity and confidentiality issues, as well as performance and cost issues, that come along with it. These issues make it necessary to encrypt data prior to outsourcing it to the cloud. However, encrypting …

Preformed Particle Gel Conformance Control Performance In Partially Opened Fracture And Fully Opened Fracture Systems, Ghith Ali Ahmed Biheri

Masters Theses

"Conformance problems, such as reservoir heterogeneity can result in a significant decrease in oil recovery, and an excessive water production. Millimeter particle gels (PPG) have been used as conformance control agents to plug open fractures, however, very little research has been conducted to study their ability to plug partially open fractures. This research studies the ability of the PPG to plug partially open fracture to improve conformance and increase recovery in oil reservoirs. Rectangular Sandstone cores were used to conduct the experiments. Fracture widths used include 2, 3.5, 5 mm. For each fracture width, four gel strengths were used; gel …

Well Log Interpretation And 3d Reservoir Property Modeling Of Maui-B Field, Taranaki Basin, New Zealand, Aziz Mennan

Masters Theses

"Maui-B is one of the largest hydrocarbon-producing fields in the Taranaki Basin. Many previous works have estimated reservoir volume. This study uses 3D property modeling, which is one of the most powerful tools to characterize lithology and reservoir fluids distribution through the field. This modeling will help in understanding the reservoir properties and enhancing the production by selecting the best location for future drilling candidates. In this study, 3D seismic, core, and well log data were used to build and define a structural model, facies analysis, and petrophysical parameters. After well log interpretation and petrophysical parameter calculations, each parameter was …

Diffusion And Mechanical Characterization Of Nanoparticle-Enabled Diffusion Controlled Materials, Joseph Louis Volpe

Masters Theses

"Nanoparticle-enabled diffusion control has been shown to rapidly refine multiphase microstructures during slowly cooled casting. This thesis characterizes the diffusion and the mechanical properties of nanoparticle-enabled diffusion controlled materials. To characterize diffusion properties, in situ characterization is performed to verify the nanoparticle enabled diffusion control mechanism. Materials with nanoparticles were observed to decrease the diffusion coefficient by at least one order of magnitude under similar melting conditions as compared to materials without nanoparticles. To understand mechanical properties, the nanoparticles that assembled at the growing interface were characterized under mechanical tensile stress. Nanoparticle-enabled interfaces were observed to improve the interface bond …

Smartphone Based Ubiquitous Sensing Platform Leveraging Audio Jack For Power And Communication, Ranjana Joshi

Dissertations and Theses @ UNI

With the popularization of smartphones, various smartphone centric ubiquitous sensing applications, which use a smartphone in conjunction with external sensors for data acquisition, processing, display, communication, and storage, have emerged. Because smartphones do not have a universal data interfaces, many ubiquitous sensing applications use the earphone and the microphone channels of the 3.5mm audio interface for data communications so that they can work with various types of smartphones. The earphone channels of the 3.5mm audio interface can only send AC signal out of a smartphone, hence DC power needs to be harvested from the earphone channels.

In this research, based …

In-Situ Control Of Substrate Temperature In Additive Manufacturing To Homogenize Micro-Hardness Of Laser Clad Deposits Using Thermo-Electric Cooling, Raghu Ram Kolla

Masters Theses

”Nickel hard-surfacing alloys are replacing hard Chromium coatings due to their excellent wear and corrosion-resistant properties. In laser cladding of these alloys, however, these properties can vary across the height of the deposit due to an accumulation of excess heat generated in the deposit during the process. This may result in uneven wear of the clad parts which can be detrimental for practical purposes. The research objective is to develop an in-situ cooling system that works in line with the laser deposition system to extract the excess heat buildup and reduce the variation in the hardness of the Ni-based clad …

Automatic Discrimination Of Basal Cell Carcinoma From Sebaceous Hyperplasia Based On Image Processing Of Dermoscopy Images, Jonathan Liao

Masters Theses

“This project focuses on discriminating basal cell carcinoma from sebaceous hyperplasia using image processing techniques. Basal cell carcinoma is a kind of malignant skin cancer that needs to be treated; however, if diagnosed as sebaceous hyperplasia, a benign lesion which is a mimic of basal cell carcinoma, then it may not be treated properly. Through observation, white pouch-like areas within the lesion appear in sebaceous hyperplasia images; whereas in basal cell carcinoma images, white areas tend to be formed in a smashed irregular figure shape. Hence, utilizing image processing techniques to segment these white areas from the images and using …

A Study Of The Potential Applications Of Am241, And Determining The Feasibility Of Using Gamma Spectroscopy For Future Physical Validation, Eric A. Feissle

Masters Theses

“Am241 is typically produced via Pu241 decay in a uranium fueled reactor. Presence of Am241 can be used as the age estimation tool for spent fuel, which is a focus of this thesis along with the interest of the measurement and the ratio of production rates of Am241’s activation products; Americium-242 and its first excited state of Americium-242m. MCNP models of the core and BEGe 3825 detector were built. These models were compared with established and physical measurements of gamma/x-ray standards that were available at the reactor. Thermal fluxes at 200 kW for potential foils centered in the source holder …

An Investigation Of Borax For Sealing Inflow From Berea Sandstone, Tri-Tris Bao Nguyen

Masters Theses

"Well inflow control is a major challenge for the oil and gas industry. Erle Haliburton revolutionized well inflow control with his patent for cementing oil wells in 1921. Soon after, cement became the accepted material to establish well integrity and has been ever since. Cement is used in all phases of the well life cycle, and it is expected to hold indefinitely once set. Yet based on the nature of cement and the placement techniques, flow pathways may develop from improper cementing jobs or from cement degradation over time. Well integrity is especially crucial for wellbore plugging and abandonment, since …

Multi-Objective Combinatorial Optimization Problems In Transportation And Defense Systems, Hadi Farhangi

Doctoral Dissertations

"Multi-objective Optimization problems arise in many applications; hence, solving them efficiently is important for decision makers. A common procedure to solve such problems is to generate the exact set of Pareto efficient solutions. However, if the problem is combinatorial, generating the exact set of Pareto efficient solutions can be challenging. This dissertation is dedicated to Multi-objective Combinatorial Optimization problems and their applications in system of systems architecting and railroad track inspection scheduling. In particular, multi-objective system of systems architecting problems with system flexibility and performance improvement funds have been investigated. Efficient solution methods are proposed and evaluated for not only …

A Comprehensive Analysis On Eeg Signal Classification Using Advanced Computational Analysis, Kaushik Bhimraj

College of Graduate Studies: Theses & Dissertations

Electroencephalogram (EEG) has been used in a wide array of applications to study mental disorders. Due to its non-invasive and low-cost features, EEG has become a viable instrument in Brain-Computer Interfaces (BCI). These BCI systems integrate user's neural features with robotic machines to perform tasks. However, due to EEG signals being highly dynamic in nature, BCI systems are still unstable and prone to unanticipated noise interference. An important application of this technology is to help facilitate the lives of the tetraplegic through assimilating human brain impulses and converting them into mechanical motion. However, BCI systems are remarkably challenging to implement …

Electroencephalographic Signal Processing And Classification Techniques For Noninvasive Motor Imagery Based Brain Computer Interface, Md Erfanul Alam

College of Graduate Studies: Theses & Dissertations

In motor imagery (MI) based brain-computer interface (BCI), success depends on reliable processing of the noisy, non-linear, and non-stationary brain activity signals for extraction of features and effective classification of MI activity as well as translation to the corresponding intended actions. In this study, signal processing and classification techniques are presented for electroencephalogram (EEG) signals for motor imagery based brain-computer interface. EEG signals have been acquired placing the electrodes following the international 10-20 system. The acquired signals have been pre-processed removing artifacts using empirical mode decomposition (EMD) and two extended versions of EMD, ensemble empirical mode decomposition (EEMD), and multivariate …

Design And Modeling For Dc Nanogrids, Ormond D. Castle

College of Graduate Studies: Theses & Dissertations

Smart grids were constructed as a means of communication to the electric grid through computer and other information technologies. This line of communication acts as gauge for a more accurate reading of power consumed. A nano grid is a model version of a smart grid with the ability to function as separate power generator. Such feature allows for this grid to power single loads and apply for special applications. A DC-DC converter was designed to apply to a nano grid which is a form of a smart grid. The converter was a single-input-multi-output converter which is taking one dc voltage …

Wind Turbine Noise And Wind Speed Prediction, Tyler H. Blanchard

College of Graduate Studies: Theses & Dissertations

In order to meet the US Department of Energy projected target of 35% of US energy coming from wind by 2050, there is a strong need to study the management and development of wind turbine technology and its impact on human health, wildlife and environment. The prediction of wind turbine noise and its propagation is very critical to study the impacts of wind turbine noise for long term adoption and acceptance by neighboring communities. The prediction of wind speed is critical in the assessment of feasibility of a potential wind turbine site. This work presents a study on prediction of …

A Case Study Of Student Veteran Efficacy In The College Of Engineering And Information Technology At Georgia Southern University, Kevin G. Finley

College of Graduate Studies: Theses & Dissertations

This thesis addresses the issues student veterans face in their transition from military to academic life while pursuing an undergraduate degree in the STEM fields (Science, Technology, Engineering, Math) at Georgia Southern University’s College of Engineering and Information Technology (CEIT). Historically this transition has been a difficult one. Through the implementation of a mentorship program comprised of military veterans on the staff and faculty of Georgia Southern University as well as assistance and participation from members of the case study researcher team and primary researcher this program assisted incoming military student veterans as they assimilated into the collegiate atmosphere. The …

Ego-Localization Navigation For Intelligent Vehicles Using 360° Lidar Sensor For Point Cloud Mapping, Tyler Naes

College of Graduate Studies: Theses & Dissertations

With its prospects of reducing vehicular accidents and traffic in highly populated urban areas by taking the human error out of driving, the future in automobiles is leaning towards autonomous navigation using intelligent vehicles. Autonomous navigation via Light Detection And Ranging (LIDAR) provides very accurate localization within a predefined, a priori, point cloud environment that is not possible with Global Positioning System (GPS) and video camera technology. Vehicles may be able to follow paths in the point cloud environment if the baseline paths it must follow are known in that environment by referencing objects detected in the point cloud …

Solar Irradiance Forecasting And Implications For Domestic Electric Water Heating, Christopher Nutter

College of Graduate Studies: Theses & Dissertations

As the effects of burning fossil fuels continues to present its prevalence, the interests in alternative forms of energy is expanding. Within the home, the domestic electrical water heater accounts for approximately 17% of its energy consumption. Reducing the amount of energy required to produce hot water from this thermal system alone can have a significant effect on reducing its carbon footprint. In this presented work, a modeled domestic electrical water heater was supplied photovoltaic and on-grid electrical power to increase its energy efficiency. As photovoltaic (PV) energy is directly related to solar irradiation, it is important to receive accurate …

Thermal Performance Of A Double-Pipe Heat Exchanger With A Koch Snowflake Fractal Design, Anton Gomez

College of Graduate Studies: Theses & Dissertations

Double-pipe heat exchangers are the simplest type of heat exchanger and are widely utilized in industrial applications. The effectiveness of double-pipe heat exchangers can be increased by using various heat transfer enhancement techniques. Passive heat transfer enhancement methods are desirable as they do not require moving components and are easy to manufacture and maintain. The focus of this study is to implement a passive heat transfer enhancement method and to investigate how thermal performance is impacted. Specifically, the inner pipe in a heat exchanger will be modified to have a cross-section in accordance with the Koch snowflake fractal pattern. The …

Performance Analysis Of Massive Mimo System With Quality Of Service Requirements And Precoding Techniques, Kishan Neupane

College of Graduate Studies: Theses & Dissertations

The massive MIMO is a promising technology for future 5G wireless communication systems to provide high spectrum efficiency. The use of a very large number of antennas for both transmission and reception is an intuitive approach to boost the system capacity and enhance the link reliability. The main requirement of future wireless systems are high throughput, serving many users simultaneously with optimal energy consumption. In the first part of the thesis, we proposed a novel algorithm for secrecy rate analysis of massive MIMO with QoS requirement by adapting the transmit signal vector and power of user using game theory. The …

Enhancing Ductility Of Wwr Slabs, Mohamed Shwani, Taylor J. Sorensen, Ethan Pickett, Parker Syndergaard, Marc Maguire

Faculty Publications

A series of research studies have recently identified an issue called strain localization in welded wire reinforced (WWR) members. This phenomenon reportedly concentrates strains at welded cross wire locations and severely limit ductility. Those that identified the phenomenon used it to imply that WWR is unsafe because it does not warn of failure. This research program is investigating details to mitigate the strain localization effect and demonstrate the WWR can be used safely. Sixteen beams have been constructed using WWR and rebar with various cross wire spacing, using a realistic design. The strain localization phenomenon was not demonstrated, but WWR …

Dynamic Model And Estimator Development For A Smart Refractory Brick With Embedded Wireless Sensors For Gasifier Applications, Qiao Huang

Graduate Theses, Dissertations, and Problem Reports (ETD)

The operating temperature is one of the most important variables for gasifier operation. A higher temperature can shorten the service life of the refractory lining. A lower temperature can reduce the extent of carbon conversion and disrupt the flow of molten slag in a slagging gasifier. Therefore temperature is one of the most important variable in a gasifier. In slagging gasifiers, molten slag can penetrate into the refractory lining leading to refractory spallation, undesired downtime, and costly replacement. Even though the temperature and extent of slag penetration are extremely important for the gasifier operation, they cannot be measured reliably by …

Semi-Empirical Model For Fire Spread In Shrubs With Spatially-Defined Fuel Elements And Flames, Dallan Prince, Chen Shen, Thomas H. Fletcher

Faculty Publications

A semi-empirical model was developed which forms shrub geometries from distinct fuel elements (e.g. leaves) and describes flame spread from element to element. Ignition, flame growth and flame decay patterns were based on combustion data of single leaves. Extension of the model to various heating conditions was achieved by scaling the flame growth parameters using physics-based heat transfer models. The resulting model offers a novel approach to examine fire spread and to explicitly describe both distinct fuel elements and fire behavior. This approach balances computational speed and modeling detail while providing a unique perspective into fire spread phenomena. Comparisons of …

Modeling Soot Oxidation And Gasification With Bayesian Statistics, Alexander Jon Josephson, Neal D. Gaffin, Sean T. Smith, Thomas H. Fletcher, David Lignell

Faculty Publications

This paper presents a statistical method for model calibration using data collected from literature. The method is used to calibrate parameters for global models of soot consumption in combustion systems. This consumption is broken into two different submodels: first for oxidation where soot particles are attacked by certain oxidizing agents; second for gasification where soot particles are attacked by H2O or CO2 molecules. Rate data were collected from 19 studies in the literature and evaluated using Bayesian statistics to calibrate the model parameters. Bayesian statistics are valued in their ability to quantify uncertainty in modeling. The calibrated consumption model with …

Human-Machine Interface Development For Modifying Driver Lane Change Behavior In Manual, Automated, And Shared Control Automated Driving, Walter Joseph Talamonti

Wayne State University Dissertations

Rear-end crashes are common on U.S. roads. Driver assistance and automated driving technologies can reduce rear-end crashes (among other crash types as well). Braking is assumed for forward collision warning (FCW) and automatic emergency braking (AEB) systems. Braking is also used for adaptive cruise control (ACC) and in automated driving systems more generally. However, steering may be advised in an emergency if the adjacent lane is clear and braking is unlikely to avoid a collision. Steering around an obstacle when feasible also eliminates the risk of becoming the new forward collision hazard. Driver assist technology like emergency steer assist (ESA) …

Video Stream Adaptation In Computer Vision Systems, Yousef Sharrab Sharrab

Wayne State University Dissertations

Computer Vision (CV) has been deployed recently in a wide range of applications, including surveillance and automotive industries. According to a recent report, the market for CV technologies will grow to $33.3 billion by 2019. Surveillance and automotive industries share over 20% of this market. This dissertation considers the design of real-time CV systems with live video streaming, especially those over wireless and mobile networks. Such systems include video cameras/sensors and monitoring stations. The cameras should adapt their captured videos based on the events and/or available resources and time requirement. The monitoring station receives video streams from all cameras and …

Mri Methods For Imaging The Feto-Placental Vasculature And Blood, Uday Krishnamurthy

Wayne State University Dissertations

Fetal magnetic resonance imaging (MRI) in recent times has become a well-established adjunct to ultrasound (US) in routine clinical prenatal care and diagnostics. The majority of fetal MRI is restricted to T2-weighted scans, where the diagnosis is based on the appearance of normal and abnormal tissue. Although there have been many advancements in MRI and a plethora of sequences, that probe different anatomical and different physiological process, the adaptation of these in fetal imaging has been rather slow. Many of these can extract quantitative parameters that can throw light on the underlying tissue’s normal/patho-physiology. But the use of such quantitative …

An Effective Methodology For Suppressing Structure-Borne Sound Radiation, Lingguang Chen

Wayne State University Dissertations

ABSTRACT

AN EFFECTIVE METHODOLOGY FOR SUPPRESSING

STRUCTURE-BORNE SOUND RADIATION

by

LINGGUANG CHEN

December 2017

Advisor: Dr. Sean F. Wu

Major: Mechanical Engineering

Degree: Doctor of Philosophy

This dissertation is primarily concerned with the development of an effective methodology for reducing structure-borne sound radiation from an arbitrarily shaped vibrating structure. There are three major aspects that separate the present methodology from all the previous ones. Firstly, it is a non-contact and non-invasive approach, which is applicable to a class of vibrating structures encountered in engineering applications. Secondly, the input data consists of a combined normal surface velocity distribution on a portion …