Engineering Commons^™

Contributing Factors To Child Stunting In Guatemala: A Systems Analysis Focused On Enteric Disease Transmission And Mycotoxin Exposure, Lee Emerson Voth-Gaeddert

Doctoral Dissertations

"Child stunting -- low height-for-age -- is a United Nation's indicator for chronic malnutrition that has been linked to both acute and chronic health problems. Data from Guatemala suggests for children under five years of age, 49% are classified as stunted. This dissertation tests the following hypotheses, among children in Guatemala 1) environmental enteric dysfunction (EED) is correlated with height-for-age, 2) aflatoxin B (AFB) exposure is correlated with height-for-age, and 3) AFB exposure is correlated with EED. A network analysis was conducted on data from the US Agency for International Development (USAID) collected in 2012 to identify trends in a …

Durability Behavior Of Fiber Reinforced Polymer And Steel Reinforced Polymer For Infrastructure Applications, Wei Wang

Doctoral Dissertations

"Crack development in reinforced concrete (RC) structures is common in elements such as bridge decks. However, these cracks can impose significant problems over time, because they allow chlorides from deicing chemicals to infiltrate concrete which will then corrode steel bars as RC structures are exposed to harsh weather. In the last decade, composite reinforcement systems are internally or externally applied to concrete structures instead of traditional steel reinforcing bars, or to strengthen concrete elements in flexure and shear. However, studies regarding the long-term durability performance of composite reinforcement systems is limited. Therefore, in order to popularize the application of these …

Experimental Study Of Natural Convection Heat Transfer And Gaseous Dynamics From Dual-Channel Circulation Loop, Ibrahim Ahmed Said Abdallah

Doctoral Dissertations

"This research focuses on establishing a range of scaled separate and integral effects experiments for studying thermal-hydraulic behavior occurring within a component or region of the prismatic very high-temperature reactor (VHTR) such as plenum-to-plenum heat transfer and gaseous dynamics during natural circulation. Natural circulation of the coolant is the leading capability for VHTR to transport the decay heat from the core to the reactor vessel during accident scenarios. To address this need, a scaled-down facility is designed and developed with only two channels with upper and lower plena. The emphasis is placed on high-resolution and high-fidelity experimental data for local …

Development Of Active Microwave Thermography For Structural Health Monitoring, Ali Foudazi

Doctoral Dissertations

"Active Microwave Thermography (AMT) is an integrated nondestructive testing and evaluation (NDT&E) method that incorporates aspects of microwave NDT and thermography techniques. AMT uses a microwave excitation to generate heat and the surface thermal profile of the material or structure under test is subsequently measured using a thermal camera (or IR camera). Utilizing a microwave heat excitation provides advantages over traditional thermal excitations (heat lamps, etc.) including the potential for non-contact, selective and focused heating. During an AMT inspection, two heating mechanisms are possible, referred to as dielectric and induction heating. Dielectric heating occurs as a result of the interaction …

Advanced Control Architectures For Grid Connected And Standalone Converter Systems, Subhajyoti Mukherjee

Doctoral Dissertations

"This dissertation proposes new control algorithms dedicated towards improving the reliability, computational burden and stability in grid-connected and stand-alone based power electronic converter systems applicable for ac microgrids.

Two voltage sensorless control architectures, one for stand-alone applications and the other for grid-connected application are established in this thesis. The output voltage of a standalone single-phase inverter is controlled directly by controlling the output filter capacitor current without using a dedicated output voltage sensor. A method to estimate the output filter capacitance is also presented. For the grid connected converter, a novel closed loop estimation is presented to estimate the grid …

Characterizing Long-Term Groundwater Conditions And Lithology For The Design Of Large-Scale Borehole Heat Exchangers, David Charles Smith

Doctoral Dissertations

"Construction of large scale ground coupled heat pump (GCHP) systems that operate with hundreds or even thousands of boreholes for the borehole heat exchangers (BHE) has increased in recent years with many coming on line in the past 10 years. Many large institutions are constructing these systems because of their ability to store energy in the subsurface for indoor cooling during the warm summer months and extract that energy for heating during the cool winter months.

Despite the increase in GCHP system systems constructed, there have been few long term studies on how these large systems interact with the subsurface. …

Real-Time Diesel Particulate Matter Monitoring In Underground Mine Atmospheres, Association With The Standard Method And Related Challenges, Muhammad Usman Khan

Doctoral Dissertations

"Diesel-powered equipment is a significant component of underground mining operations. Miners' exposure to diesel exhaust is harmful. The standard Diesel Particulate Matter (DPM) monitoring method (NIOSH 5040 method) has limitations that preclude rapid DPM estimation and detailed understanding of DPM variations over time. However, real-time DPM monitors do not inherit these limitations. Biodiesel is often used as a substitute for regular petroleum-diesel because of its ability to emit less DPM. However, accuracy of available real-time DPM monitors has not been determined in mines using 70% to 99% (high-percent) biodiesel. The present research addresses this need by rigorous testing of a …

Modal Based Bga Modeling In High-Speed Package, Shuai Jin

Doctoral Dissertations

"In the Section 1, the improved "Root-Omega" method for extracting dielectric properties from fabricated multilayer printed circuit boards is proposed. Based on the electrical properties of fabricated transmission lines, the improved "Root-Omega" method applied to cases with smooth and rough conductors is validated using simulations. Error sensitivity analysis is performed to demonstrate the potential errors in the original "Root-Omega" procedure and the error sensitivity is significantly reduced by the proposed improvements.

In the Section 2, a fast modal-based approach is developed to accurately and efficiently capture the proximity effect. Image theory is also applied in the proposed approach to reduce …

Atomic/Molecular Layer Deposition Prepared Size-Selective Catalysts And Supported Nickel Catalysts, Zeyu Shang

Doctoral Dissertations

"Heterogeneous catalysts are widely used because of their many advantages. In this dissertation, the application of atomic/molecular layer deposition (ALD/MLD) in heterogeneous catalyst synthesis and modification was examined.

A novel nanostructured size-selective catalyst was synthesized by depositing ultra-thin porous shells on the surface of catalysts. The ultra-thin porous shells were formed by oxidation of aluminum alkoxide films deposited by MLD. The catalytic activity of the size-selective catalyst was improved by introducing gaps between the porous shell and catalytic metal nanoparticles. The introduction of gaps greatly reduced the catalyst activity loss, which resulted from the contact areas between the active sites …

Impact Of Vertical Internals On The Hydrodynamics And Heat Transfer Coefficient In A Gas-Solid Fluidized Bed, Haidar Moafaq Taofeeq

Doctoral Dissertations

"This research studied the impact of the dense vertical immersed heat exchanging tubes on the gas and solids hydrodynamic characteristics, flow regime, pressure drop, and heat transfer in a 0.14 m inside diameter gas-solid fluidized bed column of. Two sizes of vertical internal tube bundles (0.0127 and 0.0254 m) of circular arrangement have been implemented to represent the heat exchange tubes covering 25% of the column cross-sectional area. The experimental work was achieved at different operating conditions and various solids particle types that differ in average particle size, solids density, particles shape, and particles sphericity. The experimental measurements were performed …

Design And Performance Of Cost-Effective Ultra High Performance Concrete For Bridge Deck Overlays, Mahdi Valipour

Doctoral Dissertations

"The main objective of this research is to develop a cost-effective ultra-high performance concrete (UHPC) for bonded bridge deck overlays. The high durability and mechanical properties of such repair material can offer shorter traffic closures and prolong the service life of the pavement. The UHPC was optimized using supplementary cementitious materials (SCMs), proper combinations of sands, and adequate selection of fiber types and contents. Packing density studies included paste, sand, and fiber combinations. The robustness of optimized UHPC mixtures to variations of mixing and curing temperatures was examined. The efficiency of various shrinkage mitigation approaches in reducing autogenous and drying …

Characterization And Numerical Simulation Of The Microstructural And Micromechanical Viscoelastic Behavior Of Oil Sands Using The Discrete Element Method, Eric Kofi Gbadam

Doctoral Dissertations

"Oil sands are naturally geologic formations of predominantly quartz sand grains whose void spaces are filled with bitumen, water, and dissolved gases. The electric rope shovel is the primary equipment used for excavating the Athabasca oil sand formations. The equipment's static and dynamic loads are transferred to the formation during excavation and propel. These loads cause ground instability leading to sinkage or rutting, crawler wear, and fracture failures. These problems result in unplanned downtimes, production losses, and high maintenance costs. In order to address these problems, there is a need to develop valid models that capture the behavior and performance …

Experimental Investigations Of Natural Circulation In A Separate-And-Mixed Effects Test Facility Mimicking Prismatic Modular Reactor (Pmr) Core, Mahmoud M. Taha

Doctoral Dissertations

"After the Fukushima Daiichi nuclear power plant accident in 2011, significant attention was directed to investigate natural circulation thermal-hydraulics in Prismatic Modular Reactors (PMRs). Natural circulation is employed as a passive safety feature that passively removes the decay heat released after the loss of flow accidents (LOFA). Several computational studies have addressed such phenomena, however, validation of Computational Fluid Dynamics (CFD) is needed by providing high-quality data obtained from separate test facilities designed with reference to the corresponding reference PMRs. To address this need, a separate effects Plenum-to-Plenum Facility (P2PF) was designed and developed with dual channels and plena for …

The Influence Of Caprock On Blast Fragmentation Distribution, Matthew Kurtis Coy

Doctoral Dissertations

"This dissertation describes the development of a small-scale model of a caprock-laden quarry blast and discusses the results from that testing. The purpose of this testing was to provide insight into the reasons for poor caprock breakage during blasting.

Small-scale test blocks were poured using a weak mortar mix to represent a limestone formation at a small scale. A cold joint was created in the upper portion of the test specimens to represent the bedding plane that separates caprock and substrate layers in a caprock-laden limestone bench. The scale-model test blocks were blasted using detonating cord. The primary configuration for …

Dirac Surface States Of Magnetic Topological Insulators, Seng Huat Lee

Doctoral Dissertations

"Magnetic topological insulator (TI) has been theoretically proposed to be a platform for inducing magnetic monopole and exhibit fascinating quantum phenomena, whereas topological superconductor can host Majorana fermions, particles that are their own antiparticles, which can be manipulated for topological quantum computing. In this dissertation, we experimentally demonstrated that by intercalation of different transition metals in the van der Waals gaps of Bi₂Se₃ TI, magnetism and even superconductivity can be induced. In Fe_xBi₂Se₃, antiferromagnetism is induced with a transition temperature at ~ 100 K. Coexistence of the Dirac surface state with …

Numerical And Experimental Study Of New Designs Of All-Vanadium Redox Flow Batteries For Performance Improvement, Mohammed Abdulkhabeer Ali Al-Yasiri

Doctoral Dissertations

"Energy storage is envisioned as a key part of a renewable energy solution incorporated in a grid that overcomes two critical limits of renewable energy: intermittency and uncertainty. Among various technologies, a vanadium redox flow battery (VRFB) offers a promise because of its unique features such as long cycle life, separation of energy and power ratings, and capability of a deep discharge. The remaining challenges, however, include the limited application due to low energy density and complicated geometries. The complex geometry makes it difficult to optimize the performance and can cause a serious concern about leakage of the liquid. The …

Experimental And Computational Investigation Of Multi-Principal Element Alloys, Mohsen Beyramali Kivy

Doctoral Dissertations

"Multi-principal element (MPE) alloys, unlike traditional alloys, consist of five or more principal elements with near equi-atomic compositions creating a large new compositional space for exploring new alloy possibilities. However, designing MPE alloys with the desired phases, microstructures and properties is challenging task, and there is a demand for basic research for a better understanding of structure-processing-property relations in these alloys.

In this Ph.D. research, different computational models and experiments were integrated to study phase formations, and mechanical properties of different MPE alloys. Density functional theory (DFT) and ab initio molecular dynamics (AIMD) simulations were used to determine crystal structures, …

Long-Period Fiber Grating Corrosion Sensors For Life-Cycle Monitoring And Assessment Of Reinforced Concrete Structures, Yizheng Chen

Doctoral Dissertations

"This study aims to: (1) explore, develop, calibrate and validate Fe-C coated, long period fiber grating (LPFG) sensors for short-term mass loss measurement of the Fe-C coating; (2) develop, calibrate, and validate steel tube-encapsulated, fiber optic probes and LPFG sensors for long-term mass loss detection of the steel tube; (3) correlate the corrosion process of packaging metal materials with that of steel bars in direct contact with the packaged probe or sensor except for a thin insulation tape; and (4) apply both types of corrosion sensors into reinforced concrete (RC) structures for reinforcing bar corrosion monitoring and structural condition assessment. …

Manufacturing Of Advanced Continuous Fiber Reinforced Composites For High Temperature Applications, James Robert Nicholas

Doctoral Dissertations

"New resin systems have enabled composites to be considered as attractive alternatives in structural applications that require material to be stronger, lighter and/or more resilient to environmental effects. The current work is on the development of processes to produce continuous fiber reinforced materials from two state of the art resin systems. Two processes were developed to produce continuous fiber reinforced ceramic materials from a preceramic polymer. The first was a vacuum forming process developed using the out-of-autoclave polymer composite manufacturing technique in conjunction with the polymer infiltration and pyrolysis process to produce ceramic composite material of zirconium diboride-silicon carbide reinforced …

Imaging A Fly Ash Landfill Using Non-Invasive Technologies (Ert And Masw), Atiat Shaban Qasim Alsaaideh

Doctoral Dissertations

"Electrical resistivity tomography (ERT) data were acquired across a segment of an existing fly ash landfill in southwestern Missouri. The objective was to map potential karst features and identify probable groundwater seepage through and beneath the landfill.

Variations in the moisture content were mapped below and above the two liners (clay and synthetic) systems, the soil and bedrock. Seepage pathways were mapped through the fly ash and the underlying soil and rock. No visual evidence was found on any of the 3D ERT profiles of the presence of either pre-existing air-filled voids or pre-existing or newly infilled clay-filled voids. There …

Discrete Ordinates Ct Organ Dose Simulator (Doctors), Edward T. Norris

Doctoral Dissertations

"Computed tomography (CT) has become pervasive in medical diagnostics as improved imaging techniques and processing algorithms provide higher quality information to doctors. However, the exponentially increasing usage of CT has raised concerns regarding long term low-dose radiological risks.

Currently, the dose to patients is computed using Monte Carlo methods and experimental tests. In other areas of radiation transport, deterministic codes have been shown to be much faster than Monte Carlo codes.

Currently, no deterministic methodology exists to automatically generate a spatially distributed dose profile from a CT voxel phantom. This work proposes a new code, Discrete Ordinate CT Organ Dose …

Promotional Effect Of Molten Carbonates On Proton Conductivity And Oxygen Reduction Reaction – An Experimental And Computational Study, Xiaolei Xiong

Theses and Dissertations

Recent research of Solid oxide fuel cells (SOFCs) is aimed to lower the operating temperature to an intermediate temperature (IT) range of 500 to 700^oC, while maintaining a proper performance. This Ph.D. research project investigates the promotional effects of alkaline carbonate eutectics on the proton conductivity of proton conducting electrolytes and cathodic ORR reactivity in SOFCs by both experimental and computational methods. The ionic conductivity of the MC-BZY composite above 500^oC increases with the higher loading of MC. The sample exhibited nearly a factor of two higher conductivity in H₂-containing atmosphere than in air. …

Reducing Model Selection Computational Cost By Metamodeling The Evidence, Ramin Madarshahian

Theses and Dissertations

Modeling is an abstraction of reality that lets a designer or engineer perform simulations with a “real” object or structure without testing it physically. However, the result of simulations is as good as their models. Selecting the best model among many candidates is another challenge.

Complex models could translate into more accurate predictions, but they also require larger computational effort. The Bayes factor is often used to compare different models considering the data and analyst’s experience. To obtain the Bayes factor, the Bayesian model evidence is calculated; however, calculating the Bayesian model evidence of computationally expensive models is not a …

Study Of Mos2 And Graphene-Based Heterojunctions For Electronic And Sensing Applications, Ifat Jahangir

Theses and Dissertations

Since the discovery of graphene, there has been an increase in two-dimensional (2D) materials research for their scalability down to atomic dimensions. Among the analogs of graphene, transition metal dichalcogenides (TMDs) are attractive due to their exceptional electronic and optoelectronic properties. MoS2, a TMD, has several advantages over graphene and the industry workhorse Si, and has been reported to demonstrate excellent transistor performances. The key obstacle in the commercialization of MoS2 technology is low carrier mobility over large areas for top-down devices. Although there were several early reports on synthesis of atomically thin MoS2 with moderate mobility, transferring large area …

Mechanical Characterization And Non-Destructive Evaluation Of Sicf-Sicm Composite Tubing With The Impulse Excitation Technique, Nathaniel Truesdale

Theses and Dissertations

With growing interest on ceramic fiber reinforced ceramic matrix composites (CMC) for accident tolerant fuel, the need for mechanical characterization of ceramic composite arises. It has been of particular interest to non-destructively evaluate the mechanical performance of these composites. Impulse excitation (IE) is a well-established method for non-destructive mechanical characterization of homogeneous isotropic material of well-defined shapes. In this thesis, impulse excitation technique was applied for non-destructive characterization of composite tube for the first time as far as we know. CMC, when stressed beyond its damage threshold, will experience various forms of structural damage, such as matrix micro-cracking, fiber-matrix debonding, …

Investigating The Feedstock Properties And Process Conditions Influencing The Characteristics Of Products Generated From The Hydrothermal Carbonization Of Organic Feedstocks, Liang Li

Theses and Dissertations

Hydrothermal carbonization (HTC) is a novel environmentally beneficial thermal conversion process for the transformation of organic feedstocks to value-added products. However, little is known about the role of feedstock properties and/or process conditions during carbonization. This study was conducted to determine the parameters most influential during the HTC of organic feedstocks. Experiments and statistical analyses were conducted to: (1) determine the effect of specific feedstocks, feedstock interactions, and process conditions on carbonization product characteristics; (2) understand how initial liquid characteristics influence product characteristics and evaluate the significance of these initial liquid characteristics in predicting product characteristics; and (3) develop statistical …

Fault Protection In Dc Microgrids Based On Autonomous Operation Of All Components, Qiu Deng

Theses and Dissertations

DC power distribution systems (or so called DC microgrids) are of wide interest for various power applications due to their advantages over traditional AC power distribution systems with respect to power density and power distribution efficiency. On the other hand, short-circuit faults present formidable hazards in these systems. It is difficult to extinguish these arc faults via conventional circuit breakers due to the lack of natural zero-crossing of DC current. Also the DC breakers are usually more bulky and costly. Today, fault protection in these systems – to the extent that it exists – relies on over-current time-out limits in …

Structural, Interfacial, And Electrochemical Properties Of Pr2nio4+Δ – Based Electrodes For Solid Oxide Fuel Cells, Emir Dogdibegovic

Theses and Dissertations

Currently, the electrochemical performance and performance durability of solid oxide fuel cells (SOFCs) are limited by cathode materials. The high polarization resistance and phase instability of the cathode are two major challenges to hinder the commercialization of SOFC systems. Two families of oxides are presently known as potential cathode materials for SOFCs: (1) the perovskite family of oxides with a general formula of ABO₃, and (2) the Ruddlesden-Popper (RP) family of oxides (e.g. nickelates) with a general formula of A₂BO₄. The electron-hole conduction in these materials occurs simultaneously with oxygen ion conduction based on …

Three Segment Adaptive Power Electronic Compensator For Non-Periodic Currents, Amin Ghaderi

Theses and Dissertations

In this dissertation, a new technique is proposed for the compensation of nonperiodic load current. The method provides control references for three co-located devices, each corresponding to one moving calculation window and one decomposed part of the compensated current. They are slow compensator with high power rating, large calculation window, and low switching frequency; fast compensator with lower power rating, shorter calculation window, and higher switching frequency; and the reactive compensator which is an ordinary static VAR compensator (SVC). To improve the flexibility of the technique, a fuzzy based adaptive window is proposed for the slow compensator to find the …

Wideband Low Side Lobe Aperture Coupled Patch Phased Array Antennas, Dhruva Poduval

Theses and Dissertations

Low profile printed antenna arrays with wide bandwidth, high gain, and low Side Lobe Level (SLL) are in great demand for current and future commercial and military communication systems and radar. Aperture coupled patch antennas have been proposed to obtain wide impedance bandwidths in the past. Aperture coupling is preferred particularly for phased arrays because of their advantage of integration to other active devices and circuits, e.g. phase shifters, power amplifiers, low noise amplifiers, mixers etc. However, when designing such arrays, the interplay between array performance characteristics, such as gain, side lobe level, back lobe level, mutual coupling etc. must …