Engineering Commons^™

Role Of Ground Glass Fiber As A Pozzolan In Portland Cement Concrete, Hassan Rashidian-Dezfouli, Prasad Rao Rangaraju

Publications

Millions of tons of fiberglass are produced annually for a variety of applications. Because of stringent quality requirements and operational characteristics of the manufacturing plants, a significant quantity of fiberglass that does not meet required specifications of the industry ends up as waste in landfills. This study investigated the use of ground glass fiber (GGF) that had been discarded by plants because it did not meet prescribed standards, as a supplementary cementitious material (SCM) for portland cement. Three replacement levels (10%, 20%, and 30% by mass) for portland cement in paste, mortar, and concrete mixtures were studied. Mechanical and durability …

Utilization Of Drone Technology To Improve Tower Worker Safety And Productivity, Trey J. Leasher

Undergraduate Honors Theses

The purpose of this research is to identify techniques by using drones to improve the safety and productivity of tower workers. Tower work requires that workers frequently climb structures for inspections at heights between 200 and 400 feet with some towers that exceed 1000 feet above ground level. The fatality rates of tower workers frequently exceed all other professions in the United States and is regarded as one of the most dangerous industries to work in. This is because tower workers have to make a several hundred foot climb for a simple visual inspection, thus exposing them to hazards that …

Formative Assessment In Mathematics For Engineering Students, Eabhnat Ni Fhloinn, Michael Carr

Articles

this paper, we present a range of formative assessment types for engineering mathematics, including in-class exercises, homework, mock examination questions, table quizzes, presentations, critical analyses of statistical papers, peer-to-peer teaching, online assessments and electronic voting systems. We provide practical tips for the implementation of such assessments, with a particular focus on time or resource constraints and large class sizes, as well as effective methods of feedback. In addition, we consider the benefits of such formative assessments for students and staff.

Characteristics Of Different Systems For The Solar Drying Of Crops, Brian Norton

Articles

Solar dryers are used to enable the preservation of agricultural crops, food processing industries for

dehydration of fruits and vegetables, fish and meat drying, dairy industries for production of milk powder,

seasoning of wood and timber, textile industries for drying of textile materials. The fundamental concepts and

contexts of their use to dry crops is discussed in the chapter. It is shown that solar drying is the outcome of

complex interactions particular between the intensity and duration of solar energy, the prevailing ambient

relative humidity and temperature, the characteristics of the particular crop and its pre-preparation and the

design and …

Interior Colour Rendering Of Daylight Transmitted Through A Suspended Particle Device Switchable Glazing, Aritra Ghosh, Brian Norton

Articles

The colour rendering index (CRI) and correlated colour temperature (CCT) of daylight change upon transmission through a variable transmittance suspended particle device (SPD) switchable glazing.

The luminous transmittance of SPD glazing was found to vary from 0.02 to 0.55 in opaque and transparent state respectively. Below 0.14 transmittance, the CRI for a particular SPD glazing was less than 80.

No strong correlation was found between CCT and CRI. The CRI of SPD glazing in a transparent state was similar to double panes glazing for SPD glazing transmittance greater than 0.24.

Hybrid Solar Thermophotovoltaic-Biomass/Gas Power Generation System With A Spectrally Matched Emitter For Lower Operating Temperatures, C. M. Iftekhar Hussain Cmih, Brian Norton, Aidan Duffy, Mohamed Oubaha

Conference Papers

Three conceptual designs have been developed for hybrid solar-biomass/gas thermophotovoltaic (TPV) system for a non-intermittent power generation which can operate at relatively low TPV operating temperatures. TPV cells with lower band gap has been chosen for this conceptual hybrid device. The low band TPV cell generates electricity at longer photonic wavelength which corresponds a lower operating temperature. The development methodology is presented for a spectrally matched emitter which emits maximum photonic energy in the 600°C -1000°C temperature range with correspondingly lower photonic energy emission in the 0°C -600°C range. This approach for spectral control in TPV systems requires fewer system …

A Packaged Whispering Gallery Mode Strain Sensor Based On A Polymer Wire Cylindrical Micro Resonator, Vishnu Kavungal, Gerald Farrell, Qiang Wu, Arun Mallik, Yuliya Semenova

Articles

We propose a whispering gallery mode (WGM) strain sensor formed by a polymer-wire cylindrical micro resonator for strain measurement applications. WGMs are generated by evanescently coupling light into the polymer-wire resonator from a silica fiber taper fabricated by the micro heater brushing technique. Accurate and repeatable measurements of a strains up to one free spectral range (FSR) shift of the WGMs (corresponding to 0.33 % of the polymer-wire elongation, 3250 μɛ) are demonstrated experimentally with the proposed sensor. Practical packaging method for the proposed strain sensor on a glass microscope slide has also been realized making the sensor portable and …

Strain Distribution In The Porcine Lumbar Laminae Under Asymmetric Loading, Colin Bright, Stephen Tiernan, Fiona Mcevoy, Patrick Kiely

Conference Papers

If the articular facets of the vertebra grow in an asymmetric manner, the developed geometry causes an asymmetry of loading. When the loading environment is altered by way of increased activity, the likelihood of acquiring a stress fracture may be increased. The combination of geometric asymmetry and increased activity is hypothesised to be the precursor to the stress fracture under investigation in this study, spondylolysis. This vertebral defect is an acquired fracture with 7% prevalence in the paediatric population. This value increases to 21% among athletes who participate in hyperextension sports. Tests were carried out on porcine lumbar vertebrae, on …

Development Of Magnetorheological Elastomers (Mres) For Strength And Fatigue Resistance, J. Mcintyre, Stephen Jerrams

Books/Book Chapters

Natural rubber (NR)-based magnetorheological elastomers (MREs) exhibiting a reasonable switching effect were fabricated and tested. They were strong enough for use in automotive applications but still needed protection against ageing. Ethylene–propylene–diene rubber (EPDM) is a cost-effective material that is frequently used in the automotive industry because of its advantageous range of properties. With these applications in mind, it was a logical progression to the development of EPDM-based MREs. Unlike strain-crystallising NR, EPDM requires reinforcement to render its tensile and fatigue strength suitable for use in most applications. While small amounts of carbon black were sufficient for the NR-based MREs, a …

Thermal Mass Performance Of Concrete Panels Incorporated With Phase Change Materials, Dervilla Niall, Roger West, Oliver Kinnane, Sarah Mccormack

Conference papers

Using the mass of a building as a thermal storage system can reduce the demand on the auxiliary heating and cooling systems of the building. Concrete combines a high specific heat capacity with a thermal conductivity that is appropriate for the diurnal heating and cooling cycle of buildings. The heat storage capacity of concrete can be enhanced by adding phase change materials (PCMs) which provide a high latent heat storage capacity. However the addition of PCM to concrete reduces the conductivity of the concrete which may affect the ability of a PCM-concrete panel to absorb and release heat within the …

An Introduction To Positive Sum Design, Ian Gonsher

Articles

No abstract provided.

Selection Criteria For Miscible-Gases To Enhance Oil Recovery In Unconventional Reservoirs Of North America, Dheiaa Alfarge, Mingzhen Wei, Baojun Bai, Mortadha Alsaba

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Unconventional resources have played a significant role in changing oil industry plans recently. Shale formations in North America such as Bakken, Niobrara, and Eagle Ford have huge oil in place, 100-900 billion barrels of oil in Bakken only. However, the predicted primary recovery is still low as 5-10%. Therefore, seeking for techniques to enhance oil recovery in these complex plays is inevitable. In this paper, two different approaches have been integrated to investigate the feasibility of three different miscible gases which are CO₂, lean gases, and rich gases. Firstly, numerical simulation methods of compositional models have been incorporated …

Optimizing Injector-Producer Spacing For Co2 Injection In Unconventional Reservoirs Of North America, Dheiaa Alfarge, Mingzhen Wei, Baojun Bai, Abdullah Almansour

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Shale oil reservoirs such as Bakken, Niobrara, and Eagle Ford have become the main target for oil and gas investors as conventional formations started to deplete and diminish in number. These reservoirs have a huge oil potential; however, the predicted primary oil recovery is still low as average of 7.5 %. Carbon dioxide (CO₂) flooding has been a controversial approach to increase oil recovery in these poor-quality formations. This study investigated the effect of injector-producer spacing, in range of 925-1664 ft, on CO₂ performance in these plays by using numerical simulation methods. CO₂ utilization value under …

Annual Report 2016-2017, Depaul University College Of Computing And Digital Media

CDM Annual Reports

The College of Computing and Digital Media has always prided itself on curriculum, creative work, and research that stays current with changes in our various fields of instruction. As we looked back on our 2016-17 academic year, the need to chronicle the breadth and excellence of this work became clear. We are pleased to share with you this annual report, our first, highlighting our accomplishments.

Last year, we began offering three new graduate programs and two new certificate programs. We also planned six degree programs and three new certificate programs for implementation in the current academic year. CDM faculty were …

Concrete Pavement Service Condition Assessment Using Infrared Thermography, Yang Lu, Aidin J. Golrokh, M.D. Aminul Islam

Civil Engineering Faculty Publications and Presentations

Infrared thermography (IRT), an effective nondestructive testing method, is used to obtain an initial evaluation of the concrete pavement surface and near surface in a time effective manner. In this paper, the effect of the depth of delamination inside concrete pavement on infrared thermography technique is studied for bridge decks inspection. To be able to mimic the delamination in subsurface, two Styrofoam cubes have been inserted in different depth near the surface of the concrete cylinder. After heating up the specimen, thermal images were taken from the surface using an infrared thermal camera to evaluate the effect of subsurface defects …

Evaluation Of Mass Transfer Rate In Column Of Small Lilsx Particles, Mihikumar S. Patel

ETD Archive

Air separation using zeolite based adsorption processes is a widely-studied topic. Proper process modeling is a key requirement to simulate the process. Conventional process modeling for air separation is designed for large scale adsorption processes using a long cycle time. However, advanced technology now permits to use of a short cycle time using small particles, which significantly reduces the size of the process.
Traditional process models were mostly developed for large particles (dp > 1.5 mm). Typically, it is safely assumed that intra particle diffusion controls the rate of the process while axial dispersion has a much smaller effect. This is …

Forming A Metal Matrix Nanocomposite (Mmnc) With Fully Dispersed And Deagglomerated Multiwalled Carbon Nanotubes (Mwcnts), Mahesh Kumar Pallikonda

ETD Archive

Carbon Nanotubes (CNTs) with their exceptional properties will facilitate the Metal matrix composites (MMC) to exhibit good mechanical properties, thermal and electrical conductivities, corrosion resistance, etc. The critical factor that holds the development of the Metal matrix Nanocomposites (MMNC) by using CNTs is the tendency of CNTs to form clusters (agglomerations) due to their high Van der Waals attractions. Due to this factor, low density and other properties of the CNTs, there has been a delay in harnessing their ultimate potential.
Existing literature in contemporary times from the works of few researches in Nanocomposites shows the prevalence of using surfactants …

Investigation Of Extremum Seeking Control For Adaptive Exercise Machines, Brahm T. Powell

ETD Archive

Many muscle rehabilitation regimens are non-adaptive and recommended subjectively by physicians. While there are advantages to having the feedback of a qualified physician, utilizing real-time muscle performance feedback could be beneficial. An extremum seeking control design is proposed to fulfill the need for an automated, load-varying exercise machine that can optimize muscle performance.

Several steps are outlined to contribute to the realization of this goal. First, the extremum seeking control scheme is discussed. Second, the Hill muscle model will be described. Theoretical muscle effort extrema will be derived for selected optimization cases, namely maximizing average squared power by varying load …

Freeze-Thaw Durability Of Concrete Columns Wrapped With Frp And Subject To Corrosion-Like Expansion, Ronald S. Harichandran, M.I. Baiyasi, G. Nossoni

Civil Engineering Faculty Publications

Experiments were conducted to assess the effects of using fiber-reinforced polymer (FRP) wraps, with fibers oriented in the hoop direction, for rehabilitating corrosion-damaged columns. This paper reports findings related to the freeze-thaw durability of concrete specimens with round and square cross sections, wrapped with glass and carbon FRP, after they are subjected to an internal expansive force similar to that generated by corroding steel. The results of the experiment indicate that freeze-thaw cycles have no statistically significant effect on the compressive strength of glass- and carbon-wrapped specimens. Freeze-thaw conditioning generally reduced the longitudinal failure strain of wrapped specimens. The square …

Survey Of Lean Management Practices In Pakistani Industrial Sectors, Khurrum Bhutta, Gokhan Egilmez, Kamran Chatha, Faizul Huq

Mechanical and Industrial Engineering Faculty Publications

This research was undertaken to study the implementation and adoption of Lean management practices across several industrial sectors in Pakistan. A total of 100 companies were surveyed across five industries. The objective was to determine if there was disparity in the implementation of Lean practices and to provide a yardstick to measure that disparity. Furthermore, this study identified Lean management best practices across several industries in Pakistan, thus providing benchmarks for other industrial sectors. The data collected was analysed using various descriptive statistical methods. The results indicated robust adoption and implementation of Lean practices in Pakistani industry, though there were …

From Green Buildings To Green Supply Chains: An Integrated Input Output Life Cycle Assessment And Optimization Framework For Carbon Footprint Reduction Policy Making, N. Muhammad Aslaam, Gokhan Egilmez, Murat Kucukvar, M.Khurrum S. Butta

Mechanical and Industrial Engineering Faculty Publications

Purpose: This paper focuses on tracing GHG emissions across the supply chain industries associated with the U.S. residential, commercial and industrial building stock and provides optimized GHG reduction policy plans for sustainable development.

Design/Methodology/Approach: A two-step hierarchical approach is developed. Firstly, Economic Input Output-based Life Cycle Assessment (EIO-LCA) is utilized to quantify the GHG emissions associated with the U.S. residential, commercial and industrial building stock. Secondly, a mixed integer linear programming (MILP) based optimization framework is developed to identify the optimal GHG emissions’ reduction (%) for each industry across the supply chain network of the U.S. economy.

Findings: The results …

Evaluating And Redesigning The Self-Monitoring Tool, Harry Budi Santoso, Isnaeni Nurrohmah, Fadhilah Suci, Wade H. Goodridge

Engineering Education Faculty Publications

In order to facilitate self-monitoring interventions designed by the Faculty of Computer Science Universitas Indonesia a web-based self-monitoring tool was created. This paper aims to evaluate the tool regarding its usability and user-experiences prior to its wide adoption. The System Usability Scale (SUS) and the User-Experience Questionnaire (UEQ) were used to evaluate the self-monitoring tool. The tool was implemented in a Human-Computer Interaction course during odd semesters, and the evaluations were taken by the participants of the course. The evaluation results were analysed to help determine whether the tool needs to be enhanced or improved. Based on the results, a …

Effects Of Roughness On Droplet Apparent Contact Angles On A Fiber, M. M. Amrei, M. Davoudi, G. G. Chase, H. Vahedi Tafreshi

Mechanical and Nuclear Engineering Publications

This paper reports on our investigation of the effects of surface roughness on the equilibrium shape and apparent contact angles of a droplet deposited on a fiber. In particular, the shape of a droplet on a roughened fiber is studied via the energy minimization method implemented in the surface evolver finite element code. Sinusoidal roughness varying in both the longitudinal and radial directions is considered in the simulations to study the effects of surface roughness on the most stable shape of a droplet on a fiber (corresponding a global minimum energy state). It is found that surface roughness delays droplet …

An Annotated Corpus With Nanomedicine And Pharmacokinetic Parameters, Nastassja Lewinski, Ivan Jimenez, Bridget Mcinnes

Chemical and Life Science Engineering Publications

A vast amount of data on nanomedicines is being generated and published, and natural language processing (NLP) approaches can automate the extraction of unstructured text-based data. Annotated corpora are a key resource for NLP and information extraction methods which employ machine learning. Although corpora are available for pharmaceuticals, resources for nanomedicines and nanotechnology are still limited. To foster nanotechnology text mining (NanoNLP) efforts, we have constructed a corpus of annotated drug product inserts taken from the US Food and Drug Administration’s Drugs@FDA online database. In this work, we present the development of the Engineered Nanomedicine Database corpus to support the …

Quadmutex: Quadratic Driver Mutation Explorer, Bokhari Yahya, Tomasz Jakub Arodz

Computer Science Publications

Background

Somatic mutations accumulate in human cells throughout life. Some may have no adverse consequences, but some of them may lead to cancer. A cancer genome is typically unstable, and thus more mutations can accumulate in the DNA of cancer cells. An ongoing problem is to figure out which mutations are drivers - play a role in oncogenesis, and which are passengers - do not play a role. One way of addressing this question is through inspection of somatic mutations in DNA of cancer samples from a cohort of patients and detection of patterns that differentiate driver from passenger mutations. …

Parsing Metamap Files In Hadoop, Amy Olex, Alberto Cano, Bridget T. Mcinnes

Computer Science Publications

The UMLS::Association CUICollector module identifies UMLS Concept Unique Identifier bigrams and their frequencies in a biomedical text corpus. CUICollector was re-implemented in Hadoop MapReduce to improve algorithm speed, flexibility, and scalability. Evaluation of the Hadoop implementation compared to the serial module produced equivalent results and achieved a 28x speedup on a single-node Hadoop system.

An Integrative In-Silico Approach For Therapeutic Target Identification In The Human Pathogen Corynebacterium Diphtheriae, Syed Babar Jamal, Syed Shah Hassan, Sandeep Tiwari, Marcus V. Viana, Leandro De Jesus Benevides, Asad Ullah, Adrián G. Turjanski, Debmalya Barh, Preetam Ghosh, Daniela Arruda Costa, Artur Silva, Richard Röttger, Jan Baumbach, Vasco A.C. Azevedo

Computer Science Publications

Corynebacterium diphtheriae (Cd) is a Gram-positive human pathogen responsible for diphtheria infection and once regarded for high mortalities worldwide. The fatality gradually decreased with improved living standards and further alleviated when many immunization programs were introduced. However, numerous drug-resistant strains emerged recently that consequently decreased the efficacy of current therapeutics and vaccines, thereby obliging the scientific community to start investigating new therapeutic targets in pathogenic microorganisms. In this study, our contributions include the prediction of modelome of 13 C. diphtheriae strains, using the MHOLline workflow. A set of 463 conserved proteins were identified by combining the results of pangenomics …

Compressible Media For Water Treatment, Christine Forkins, Steven Kammermeier, Antonio Musso

Capstone Design Expo Posters

Tertiary water treatment is used to remove total suspended solids (TSS) from wastewater. Suez uses compressible media for their tertiary water treatment. There have been supplier issues in the past such as unreliability, long lead-times, unknown manufacturing process, and chances of resale. The chance of resale is an important issue because the specifications may change from one supplier to another.

The group was tasked to characterize different types of compressible media for water treatment, design a lab scale filtration unit, and design and manufacture a new media to be tested. In order to gain an operational expenditure advantage, Suez accomplishes …

Rolatube Deployment System, Zachary Allin, Zachary Ratliff, Nathaniel Trepatschko, Jeffrey Wilson

Capstone Design Expo Posters

The team has been tasked with designing a compact mechanism capable of deploying and retracting the Rolatube horizontally and vertically at a controlled rate in confined spaces (i.e. tank housing structures). Because workers are confined to tight quarters, a mechanism to aid in common activities is at times required. The mechanism will allow for tool deployment with attachments for easily sending tools and utilizing cameras. It will also be used to assist workers in stringing lights, keeping wires organized, and delivering hoses and tubes. This design will allow workers at Newport News Shipbuilding (NNS) to save time and energy while …

Foodi - Automated Ordering System, Zachary Stone, Daniel Evans, Kevin Bierlein

Capstone Design Expo Posters

We worked for BeSprout Technology to create an automated ordering system called Foodi. The Foodi system uses a combination of Java, IBM Watson, and MySQL to gather all the necessary information needed for the conversation, and is dynamic so it can be used in multiple restaurants. Many people still place orders via a phone call, so in an effort to streamline the ordering process, this project was created to enable automatic order placing so employees can focus on other tasks within the restaurant.

When a customer calls a restaurant, Foodi will take care of any orders and answer questions the …