Engineering Commons^™

System-Dynamics Modeling Of Source Mass-Depletion And Risk-Exposure Evolution For Natural Attenuation Processes In The Vadose Zone, Aspasia Kalomoiri, Agamemnon Koutsospyros, Washington Braida, Julius Pavlov

Civil Engineering Faculty Publications

Public health is potentially at risk after a contaminant of concern (COC) is released into the ecosphere. The extent of contamination depends on numerous factors; modeling a contaminant’s dynamic behavior is challenging, given the multitude of relevant parameters and the fluid nature of processes involved. For example, weather events (e.g., wet or dry periods) may affect the mass depletion and the fate and transport of COCs, and hence, the risk assessment of current and potential future exposures. Thus, to give realistic estimates for potential risks, a contaminant’s dynamic behavior must be taken into account in decision-making processes. In this paper, …

See The Bigger Picture: A True Systems Approach To Healthcare, Brian J. Galli

Faculty of Computer Science/Management Engineering Publications

“Healthcare” is typically related directly to patient care, hospitals, and ambulatory services, but it is important to see that healthcare is beyond just the delivery of care in hospitals or ambulatory services. A more accurate systems approach to views the world of healthcare as one that involves several stakeholders, including: healthcare delivery (patient care in hospitals and ambulatory services), regulatory agencies, health insurance/health plan organizations, medical device design and manufacturers, pharmaceuticals, society, government (all levels), and healthcare reform organizations. All of these stakeholders relate to each other in many levels and impact our healthcare system.

This paper will cover the …

Sliding Crane For Mobile Scissor Lift Table, Phuc Ba Chau

All Undergraduate Projects

The purpose of this report is to build a device that can be installed to the hydraulic lifting cart to help students work easily on the CNC machine. The main point of the proposal is to design a device that can carry, load, and unload the Kurt vise, which weighs over 80 lb., to the CNC machine table and to the storage area within fifteen minutes during lab time. The methodology of the report focuses on the safety and easy performance for students working in the machine shop. Safety is the main concern in the design of this project, because …

Select Adjustable Trigger System, Seth Rich

All Undergraduate Projects

There is an increasing need for singular weapon systems to fill multiple roles. A fire control group system is needed which provides a trigger that is adaptable for different uses on command by way of the safety selector. The device needs to be non-intrusive to normal function and operation of the firearm requiring no specialized training in its use. It should provide with a setting for a general combat use and a secondary setting for a designated marksman role. The proposed system interfaces with existing trigger groups by using a self-contained drop in module that counteracts the primary trigger spring …

Tensile Specimen Punch, John Allen

All Undergraduate Projects

This project comes from a need to have tensile specimens made for the MET 351, Metallurgy/Materials and Processes, and 426, Applied Strengths of Materials, labs. This punch is designed to be used with an arbor press to create the desired tensile specimen shape out of plastic blanks. The initial concept was suggested by Dr. Craig Johnson. The designs went through many changes, for example getting rid of the sides originally proposed to hold the specimen in place, and modifications to other parts to make them more efficient. Additional parts were also added to the design with the help and advice …

'94 F-150 Running Boards, Justin Wies

All Undergraduate Projects

The project manager owns a 1994 F-150 which was purchased last August. Soon after purchasing, it was determined that it was too high for passengers to get into the truck without complaining. So this project started out being all about fixing that problem. A device was needed that allowed access to the truck without complaining. The plan was to build a device that allows access to the truck while still being light enough to not affect the trucks performance. The devices that were designed are running boards built specifically for this truck. The device had to mount underneath the edge …

Re-Design To E-Nable, Sydnee Johnson

All Undergraduate Projects

A senior in the Mechanical Engineering Technology Department at Central Washington University made it her goal to have her culminating project be something that benefits people in need. Having a fascination in prosthetics, it became the main focus of her project. As children suffer the most in technological advancement of medical devices, the focus group of the project became young girls between the ages 9 and 14.

E-NABLE is a non-profit organization that is a leader in helping young children get access to body-powered prosthetics for relatively cheap. Some of the designs were made for simplicity in functionality, thus the …

Hands Free Electric Bicycle Stand, Stefan Schacht

All Undergraduate Projects

The growth of electric bicycles has spread to the US, and more bicycle shops are carrying electric assist bicycles. Most bicycle shops are currently ill equipped to accommodate heavier electric bicycles with traditional repair stands, that require at least one had to operate, and the other hand to hold up the bicycle. The problem being solved is the awkward and poor ergonomics of holding up a heavy electric bicycle with one hand, and operating a repair stand with the other. The solution is to use a repair stand that does not require hands to operate. Having a hands-free clamping device …

High Accessibility Cabinet Insert, Matthew Leal

All Undergraduate Projects

Watching grandparents and parents get older, the struggle of day-to-day activities generally increases. One of the most recurring issues the older generation experiences nearly daily is their inability to reach dishes, glassware, and other things on the topmost shelves of a kitchen. Not only is it difficult for them to use things such as stepstools, it also becomes increasingly dangerous. With age, a fall from any height could be catastrophic. With this scenario in mind, a user-friendly cabinet insert would be a very effective way to combat this issue. However, many existing models of cabinet designed to fit these requirements …

Composite Cold Expansion Tooling, Andrew Amos

All Undergraduate Projects

In the world of aircraft manufacturing, cold expansion products literally hold these aircraft together. The problem faced today is that the Little Brute Hydraulic Puller designed and built by Fatigue Technology Inc. is a handheld steel hydraulic cylinder that is heavy and expensive to produce. In a market that demands continuous improvement, there is a constant push to make the product cheaper, better and lighter. In order to accomplish this demand a composite tube will be substituted in the design as the primary pressure cylinder instead of the traditional steel pressure cylinder in order to create a lighter and cheaper …

Beer Rack On Demand Water Heater, Jason Warenski

All Undergraduate Projects

On-Demand Water Heater (for homebrewing systems)

By Jason Warenski (Engineering Technologies)

The on-demand water heater is being built for a home brewing system. The is intended to improve brewing process efficiency while reducing the footprint of the brewing equipment. The device contains a coil made from 3/8” soft copper tubing. The coil is inserted into a housing which is constructed of two 22-gauge stainless steel cylinders and a layer of ceramic insulation. Attached to the inlet and outlet of the coil are monitoring and control devices. On the inlet is a water flow meter which allows the user to monitor …

Asme Baja Rc Car Drivetrain, Walter Lackey

All Undergraduate Projects

The ASME Baja car is a student built radio controlled car, which will compete with other schools in a variety races. The drivetrain aspect of the car must smoothly transfer power from the motor to the rear wheels of the car. The drivetrain must be designed in collaboration with the other team member’s suspension system to avoid interference. The majority of the parts in the drivetrain are purchased parts intended for various applications. These parts were chosen based on their proximity to the optimal calculated values. Power flows from the electric motor through a single gear reduction, then through a …

Directional Rope Capture Device, Seaver Philipp

All Undergraduate Projects

The current market for rope capture devices shows a trend of using toothed devices as the method of creating a rope capture system. These systems are effective for a variety of applications but in any scenario in which a high load is encountered there is a large amount of damage done by the teeth to the rope. The objective of this project was to create a rope capture device that did not utilize teeth in order to create a safer loading condition on the rope. The method used for this project was application of equiangular spirals, this is the same …

Portable Snow-Bike, Tiago Sousa

All Undergraduate Projects

The world of extreme sports and more specifically the world of snow sports is changing by the minute. At the forefront of these new changes is the snow bike. The bike allows you to ride the mountain like you were riding a mountain-bike on skies, but it comes with challenges. The biggest of them being portability. The bike is restricted to certain types of lifts within the mountain and that restricts the user of its potential. This report will show that it is possible to “fold” both the frame and the handlebars to make the bike portable and therefore opening …

The Gettysburg Economic Review, Volume 10, Spring 2017

Gettysburg Economic Review

No abstract provided.

Performance Verification For Robot Missions In Uncertain Environments, Damian Lyons, Ron Arkin, Shu Jiang, Matt O'Brien, Feng Tang, Peng Tang

Faculty Publications

Abstract—Certain robot missions need to perform predictably in a physical environment that may have significant uncertainty. One approach is to leverage automatic software verification techniques to establish a performance guarantee. The addition of an environment model and uncertainty in both program and environment, however, means the state-space of a model-checking solution to the problem can be prohibitively large. An approach based on behavior-based controllers in a process-algebra framework that avoids state-space combinatorics is presented here. In this approach, verification of the robot program in the uncertain environment is reduced to a filtering problem for a Bayesian Network. Validation results …

Detecting Laminate Damage Using Embedded Electrically Active Plies – An Analytical Approach, Amany Micheal, Yehia Bahei-El-Din

Centre for Advanced Materials

Assessment of damage initiation and progression in composite laminates with embedded electrically active plies is modeled. Utilizing electrically active layers embedded in composite laminates as damage sensors is proposed by several researchers and is mainly assessed experimentally. Sensing damage using embedded electrically active plies is generally preferred over the use of surface mounted PZT wafers since the range of the latter is limited to a very narrow area underneath the surface, while multiple damage mechanisms can generally be found in several plies of the laminate. The solution presented invokes two levels of analysis. Firstly, on the laminate level, applied membrane …

Biologically Active Filters: An Advanced Treatment Process For Pharmaceuticals And Personal Care Products, Shuangyi Zhang

Dissertations

With the increasing concern of pharmaceuticals and personal care products (PPCPs) in source water, this study examines the hypothesis that existing filters and adsorbents in water treatment plants can be converted to biologically active filters (BAFs) to treat these compounds. Removals through bench-scale BAFs are evaluated as a function of media, granular activated carbon (GAC) and dual-media, empty bed contact time (EBCT), and pre-ozonation. For GAC BAFs, greater oxygen consumption, increased pH drop, and greater DOC removal normalized to adenosine triphosphate (ATP) are observed indicating a different microbial community compared to dual-media BAFs. ATP concentrations in the upper portion of …

A Half-Yearly E-Newsletter Of The Department Of Computer Science And Engineering Manipal Institute Of Technology,, Ashalatha Nayak

Faculty work

No abstract provided.

A Silk Fibroin Hydrogel With Reversible Sol–Gel Transition, Zhuping Yin, Feng Wu, Tieling Xing, Vamsi K. Yadavalli, Subhas C. Kundu, Shenzhou Lu

Chemical and Life Science Engineering Publications

In this report, a novel silk fibroin hydrogel with a reversible sol-gel transition capacity is presented, in which the base material of this reversible hydrogel is hydrophilic silk fibroin (HSF) obtained by immersing a dried regenerated Bombyx mori silk fibroin (SF) condensate in deionized water (DI water) and collecting its lixivium. The resulting HSF sol can exhibit an enhanced sol-gel transition within several hours at suitable temperatures (25-50 degrees C) without any exterior additive, even at extremely low concentrations (

Cloud Workflow Automation, William Crump, Eric Darling, Kyle Hagood, Syed Rizvi

Capstone Design Expo Posters

The goal of our project was to develop an application in the cloud which automates complex business tasks. The application allows users to create configurable events consisting of a trigger followed by an action. Triggers are designed for common tasks such as scanning a directory or email inbox for new files. When a new file is detected, the application triggers the execution of an associated action such as sending an email alerting the user of the changes or processing and moving the files. Users are thus able to automate complex tasks by configuring event sequences, leading to an increase …

Amc Native Webrtc Client, Kellan Childers, Michael Dowling, Sherdil Khawaja

Capstone Design Expo Posters

Traditional call center and telecommunication hardware is being replaced by thin, browser-based, cloud enabled web services. Industry standards for web based communication protocols, such as WebRTC, are being established. AMC needed to address this new technology, while maintaining a hybrid approach of server-based capabilities, taking advantage of the web-based communication channel, while broadcasting events to the Contact Canvas Server. Contact Canvas Agent Palette is the editing platform of the AMC adapter for Salesforce.com, allowing agents to communicate with customers through the AMC adapter/ Softphone. Using Agent Palette, the task was to integrate Video Chat using WebRTC into the AMC toolbar. …

Mapcom Self-Service Portal, Kelsey Bullock, Viet Nguyen, Alvenia Weathers

Capstone Design Expo Posters

Mapcom Systems is a software development firm that primarily serves small, rural telecommunications companies. The company is widely recognized for developing M4 Solutions, a visual operations platform that allows service providers to manage their workforce. Our team was tasked with the design and implementation of a self-service portal to be used by the customers of these telecommunications companies. The application would allow customers to easily manage their accounts, including creating and managing trouble tickets, communicating with their assigned technician, and viewing their scheduled appointments. Additionally, it would be offered across three different platforms: Web, Android, and iOS. In order to …

Richmond Mural Tour, Matthew Mcgee, Paul Mcdonald

Capstone Design Expo Posters

In the past years Richmond has been growing in popularity in the world of street art. This popularity is due in part to the many projects that brought in artists from around the world to create beautiful artwork. There is so much art outside in Richmond as a result of these projects, but no great way to navigate the streets of the city in an efficient manner to see all of it. Richmond Mural Tour is a mobile cross-platform application that allows users to explore all of the amazing outdoor artwork around the city.

This application is built on ionic …

Lab-Scale Reproduction Of Siloxane Foam Synthesis, Albert Deangelis, Benjamin Ledoux, Conrad Roos

Capstone Design Expo Posters

Evonik has a synthesis reaction to create siloxane-based foam for sale that they run in their Hopewell plant. They would like to utilize a bench scale reactor system for experimentation on the process. The problem is that the foam created on the lab scale does not show the same properties as the foam created on the plant scale and to run experiments accurately they would have to use the plant reactor, wasting both reactor time and plant resources. Evonik wanted the Senior Design team to find a way of recreating the conditions of the plant reactor on the lab scale …

Hazardous Waste Reduction Continuation, J. Brian Morrell, Alex Alvarez, Adnan Qasem

Capstone Design Expo Posters

A silicone manufacturing process yields two-phase wastewater, of which the aqueous phase flashes at 2°C primarily due to hexamethyldisiloxane (HMDSO). To be classified as non-hazardous and immediately disposable, it must flash above 60°C. Project objectives entailed identifying a method and then designing a prototype for on-site aqueous phase treatment, removing enough HMDSO for non-hazardous disposal. The previous team’s proposal was gravity separation, NaCl extraction, and feeding through an activated carbon packed bed. Extraction proved ineffective, packed bed outlet samples flashed at 52°C, and HMDSO quantification methodology was incorrect. From titration, wastewater was determined to be 3.3 ± 0.2 wt.% aqueous …

Rapid, Diagnostic Test For Cardiac Ischemia, Jose Gonzales, Abdelmagid Nasreldeen, Emerson Physioc, Julio Contreras, Evan Thoresen

Capstone Design Expo Posters

Current methods to detect cardiac ischemia rely on biomarkers such as troponin. Elevated levels of troponin are observed hours after the cardiac event. There is an unmet need for rapid diagnostic tests for cardiac ischemia, which utilizes recently discovered biomarkers. A VCU patented assay for cardiac ischemia employs the use of chemiluminescence to detect metabolic byproducts of xanthine oxidase activity. These byproducts are detectable minutes after the cardiac event. Early diagnosis of and response to cardiac events is beneficial for clinical decision-making; therefore, a point-of-care device within the emergency health setting is sought. The CLSE 203 project team designed and …

Development Of A Tabletop Soft Gel Encapsulation Machine, Brigitte Ha, Emily Miller, Haya Rizvi

Capstone Design Expo Posters

Currently, to test new formulations of gel capsules at Pfizer, they must use the large-scale machine that requires a minimum of 25 kg of gel melt and produce hundreds of capsules per run. Production at a smaller scale to enable rapid changeover for research and development is desired. The team’s goal was to achieve continuous production of sealed capsules with 80% fill capacity. Capsule sealing was the prime consideration. Preliminary trials using the existing system and heat transfer analysis indicated localized heating was necessary to promote capsule sealing. To provide localized heating, a brass wedge was designed based on the …

Rapid Detection Of Nicotine In E-Liquids, Niraja Bohidar, Ryan Joiner, Benjamin Kirby

Capstone Design Expo Posters

Electronic cigarettes have gained popularity in recent years. Electronic cigarettes operate by vaporizing flavored solutions, called e-liquids, for inhalation by the user. No method is currently available for analysis of e-liquids in the field, making regulation of electronic cigarettes difficult and inefficient. Some regulatory issues related to e-liquids include mislabeling of e-liquids by providers to avoid taxes on nicotine, the sale of nicotine-containing e-liquids to minors, and the mixing of drugs of abuse into e-liquids. Regulatory and law enforcement agencies have a need for an accurate field test capable of analyzing e-liquids for nicotine. Proposed are two devices for the …

Vertical Take-Off And Landing Aircraft, Sophie Baldwin, Michael Pennie, Alex Roberts, Dov Szego

Capstone Design Expo Posters

The primary purpose of this project is to combine the benefits of both multi-copters and fixed-wing crafts, reducing the drawbacks of both. The explosion of small unmanned aerial systems (“UASs”), also called unmanned aerial vehicles (“UAV”) in recent years is the result of their versatility and practicality. It is invaluable for obvious reasons to be able to send a small, comparatively inexpensive, remotely controlled vehicle with a camera or a payload into places where either people cannot or would prefer not to go. Quadcopters have the advantage of being able to take off and land without significant runway space, but …