Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

2017

Discipline
Institution
Keyword
Publication
Publication Type
File Type

Articles 4051 - 4080 of 8353

Full-Text Articles in Engineering

Beam Steerable Reconfigurable Antenna With Smart Rf Switching On 3d Parasitic Level, Mohammad Ababil Hossain May 2017

Beam Steerable Reconfigurable Antenna With Smart Rf Switching On 3d Parasitic Level, Mohammad Ababil Hossain

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Traditional antennas have a lot of limitations as their performance is usually fixed by their initial geometry. On the other hand, modern communication systems are getting way to complicated compared to their earlier counterparts. This necessitates some special types of smart or reconfigurable antennas, which can dynamically adapt to the requirements of the communication systems more effectively. Using conventional single functional antennas is therefore not an efficient approach in these sort of communication systems. Considering all these factors, in this thesis, a beam steerable reconfigurable antenna system is presented that can yield the radiation patterns of multiple antennas with a …


Production Of Phenol-Formaldehyde Adhesives From Catalytic Pyrolysis Oil, Angela M. Akude May 2017

Production Of Phenol-Formaldehyde Adhesives From Catalytic Pyrolysis Oil, Angela M. Akude

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Phenol-formaldehyde adhesives conventionally synthesized from fossil fuel resources pose two major concerns: sustainability issues and environmental concerns. The sustainability issues arise from the inevitable depletion of fossil fuel resources while
the environmental concerns, primarily, stem from the emission of volatile organic compounds. Thus, opting for alternative raw materials from renewable resources reduces the dependence on fossil fuels as well as promote the production of environmentally-friendly products.

The successful commercialization of bio-adhesives requires that the substitution of phenol with bio-oil during resin synthesis should be above 40%. In this study, catalytic pyrolysis oil produced from pinyon-juniper biomass and red mud alumina …


Multifunctional Reconfigurable Antennas And Arrays Operating At 60 Ghz Band, Abdurazag Mohamed Khalat May 2017

Multifunctional Reconfigurable Antennas And Arrays Operating At 60 Ghz Band, Abdurazag Mohamed Khalat

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

In this digital era, the demand for faster, reliable, and adaptive wireless communication systems is increasing. Various factors can affect the signal propagation in the wireless medium, such as weather, broadcast environment, physical obstructions, etc. This study aims to improve the antenna performance by means of dynamically altering its properties so that it can adapt to different environments and communication scenarios. This study is not resorting in a traditional antenna design, but rather explores an alternative approach known as the multifunctional reconfigurable antennas (MRAs). Unlike its predecessor, i.e., legacy antennas, MRAs can dynamically change its operation frequency, radiation pattern, and …


Autonomous Highway Systems Safety And Security, Imran Sajjad May 2017

Autonomous Highway Systems Safety And Security, Imran Sajjad

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This thesis aims to address question of safety and security in autonomous highway systems. Chains of multiple self-driving vehicles (platoons) give rise to inherent vulnerabilities to attacks resulting from their control algorithms. These weaknesses can possibly result in collisions or decreased traffic flow.

This work first provides an overview of these vulnerabilities analyzed from a control systems perspective. The capabilities and extent of damage that an attack can cause are analyzed. Then some possible mitigation strategies are presented that can defend against these attacks.

Simulation results are provided to support the effectiveness of these controllers and an experimental validation is …


Anaerobic Digestion Of Wastewater: Effects Of Inoculants And Nutrient Management On Biomethane Production And Treatment, Jason Peterson May 2017

Anaerobic Digestion Of Wastewater: Effects Of Inoculants And Nutrient Management On Biomethane Production And Treatment, Jason Peterson

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Due to population expiation and the increased awareness of the impact on the environment by wastewater treatment, improved wastewater treatment systems are needed to treat municipal and agricultural wastewater. Treating wastewater with oxygen decreases carbon compounds at the expense of energy to move carbon and oxygen to be in contact with each other. Anaerobic digestion of wastewater can reduce the cost by utilizing microbes to treat high amounts of carbon in wastewater without the need for extensive oxygen requirement. With a proper balance of nutrients, microbes also produce methane, a renewable energy source.

It has been suggested that microalgae be …


Effects Of Computer Simulation And Animation (Csa) On Students’ Problem Solving In Engineering Dynamics: What And How, Seyed Mohammad Tajvidi May 2017

Effects Of Computer Simulation And Animation (Csa) On Students’ Problem Solving In Engineering Dynamics: What And How, Seyed Mohammad Tajvidi

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Previous studies have shown that in many fields, computer simulation and animation (CSA) improve students’ learning and problem solving. However, despite the massive body of research on the role of computers in education, little research has been conducted to qualitatively examine how they affect the learning of engineering students. The purpose of this study was to explore how learning and problem solving were affected by computer modules and what similarities and differences existed between computer representations and paper-based examples.

An analysis of collected data, observations of participants’ problem-solving activities, and interviews revealed that computers can enhance students’ analytical thinking, organizing, …


Role Of Dispersion And Functionalization On Mechanical Properties In Carbon Nanotube - Polymer Composite, Medisetti Sai Praveen Kumar May 2017

Role Of Dispersion And Functionalization On Mechanical Properties In Carbon Nanotube - Polymer Composite, Medisetti Sai Praveen Kumar

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Polymer composites with carbon nanotubes (CNT) as filler material is an exciting research area, having a huge potential of offering better mechanical properties. One of the main challenges of using CNT as a filler material is mixing of CNTs within the matrix material, as this mixing determines the strength of the composite. Some of the methods being researched for improving mixing are chemical, mechanical and surfactants. Many studies have suggested high frequency mechanical stirring as the preferred way for better mixing, but challenges exist with finding the proper solvent which can be used for stirring and at the same time …


Ultra-Wideband Transceiver With Error Correction For Cortical Interfaces In Nanometercmos Process, Yi Luo May 2017

Ultra-Wideband Transceiver With Error Correction For Cortical Interfaces In Nanometercmos Process, Yi Luo

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The wireless data transmission in the application of cortical interfaces requires a minimum of 27.0 Mbps for high-resolution visual functions within a very tight power constraint (< 10 mW). Most of the published designs for this application deploy narrow band techniques and have the throughput from several Mbps to tens of Mbps up to date. This work proposed a wideband solution with the use of Error-correction codes that can realize a throughput more than 100 Mbps within a power of 10 mW.


Algae-Based Biofilm Productivity And Treatment Of Dairy Wastewater: Effects Of Temperature And Organic Carbon Concentration, Zachary T. Fica May 2017

Algae-Based Biofilm Productivity And Treatment Of Dairy Wastewater: Effects Of Temperature And Organic Carbon Concentration, Zachary T. Fica

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Production of dairy and associated products is a source of millions of gallons of wastewater every year. Water used in cleaning feeding stalls as well as the liquid component of the animal waste are two of the major volumetric components of this wastewater. This water is nutrient rich, often limiting the viability as a land applied fertilizer. However, these same nutrients could be used as an inexpensive feedstock for the cultivation of algae, which can then be used to produce downstream products including animal feed and aquaculture.

As part of this study, algal biomass was cultivated on dairy wastewater from …


Dsrc Performance Analysis In Foggy Environment For Intelligent Vehicles System, Mostafa El-Said, Samah Mansour, Alexander Arendsen May 2017

Dsrc Performance Analysis In Foggy Environment For Intelligent Vehicles System, Mostafa El-Said, Samah Mansour, Alexander Arendsen

College of Computing Peer-Reviewed Articles

Advanced Driver Assistance System (ADAS) is one of the fastest growing areas in the Intelligent Transportation Systems (ITS). Research efforts has focused on developing a driver assistant alert system to warn driver in foggy environment. However, there is a lack of which effective V2V/V2I communication technology would be the best to extend and disseminate this information to nearby vehicles. In this paper, we examine the use of Dedicated Short Range Communications (DSRC) as a V2V communication mechanism to share the foggy conditions to nearby vehicles. The study also investigates the effect of changing the fog/air density on the DSRC performance …


Electromagnetic Design Of A Superconducting Twin Axis Cavity, S. U. De Silva, H. Park, J. R. Delayen, F. Marhauser, A. Hutton May 2017

Electromagnetic Design Of A Superconducting Twin Axis Cavity, S. U. De Silva, H. Park, J. R. Delayen, F. Marhauser, A. Hutton

Physics Faculty Publications

The twin-axis cavity is a new kind of rf superconducting cavity that consists of two parallel beam pipes, which can accelerate or decelerate two spatially separated beams in the same cavity. This configuration is particularly effective for high-current beams with low-energy electrons that will be used for bunched beam cooling of high-energy protons or ions. The new cavity geometry was designed to create a uniform accelerating or decelerating fields for both beams by utilizing a TM110 dipole mode. This paper presents the design rf optimization of a 1497 MHz twin-axis single-cell cavity, which is currently under fabrication.


Modeling Local Crabbing Dynamics In The Jleic Ion Collider Ring, Salvador Sosa Guitron, Vasiliy Morozov, Jean Delayen May 2017

Modeling Local Crabbing Dynamics In The Jleic Ion Collider Ring, Salvador Sosa Guitron, Vasiliy Morozov, Jean Delayen

Physics Faculty Publications

The Jefferson Lab Electron-Ion Collider (JLEIC) design considers a 50 mrad crossing angle at the Interaction Point. Without appropriate compensation, this could geometrically reduce the luminosity by an order of magnitude. A local crabbing scheme is implemented to avoid the luminosity loss: crab cavities are placed at both sides of the interaction region to restore a head-on collision scenario. In this contribution, we report on the implementation of a local crabbing scheme in the JLEIC ion ring. The effects of this correction scheme on the stability of proton bunches are analyzed using the particle tracking software elegant.


Trim Tuning Of Sps-Series Dqw Crab Cavity Prototypes, S. Verdú-Andrés, J. Skaritka, Q. Wu, A. Ratti, S. Baurac, C. H. Boulware, T. Grimm, J. Yancey, W. Clemens, E. A. Mcewen, H. Park May 2017

Trim Tuning Of Sps-Series Dqw Crab Cavity Prototypes, S. Verdú-Andrés, J. Skaritka, Q. Wu, A. Ratti, S. Baurac, C. H. Boulware, T. Grimm, J. Yancey, W. Clemens, E. A. Mcewen, H. Park

Physics Faculty Publications

The final steps in the manufacturing of a superconducting RF cavity involve careful tuning before the final welds to match the target frequency as fabrication tolerances may introduce some frequency deviations. The target frequency is chosen based on analysis of the shifts induced by remaining processing steps including acid etching and cool down. The baseline fabrication of a DQW crab cavity for the High Luminosity LHC (HL-LHC) envisages a first tuning before the cavity subassemblies are welded together. To produce a very accurate final result, subassemblies are trimmed to frequency in the last machining steps, using a clamped cavity assembly …


In Vivo Multi-Parametric Imaging Of Metastatic And Non-Metastatic Breast Cancer, Raisa B. Rasul May 2017

In Vivo Multi-Parametric Imaging Of Metastatic And Non-Metastatic Breast Cancer, Raisa B. Rasul

Biomedical Engineering Undergraduate Honors Theses

A current issue in cancer therapy is the characterization of metastatic tumors, which can increase ease of treatment and patient trials. We present an in vivo study of metastatic (4T1) and non-metastatic (4T1-TWIST KO) breast tumor sister cell lines to understand their metabolic behavior, determine differences in two modes of imaging (reflection & transmission), and observe effect of breathing higher oxygen percentage on vascular hemoglobin oxygen saturation. After injection of 10,000 cells into mice dorsal window chambers, the glucose intake and hemoglobin oxygen saturation was measured using a fluorescent glucose analog (2-NBDG) and hyperspectral trans-illumination imaging from 520-620 nm at …


Metabolic Response To Stress Differentiates Heterogeneous Cancer Cells With Varying Metastatic Potential, Kinan Alhallak May 2017

Metabolic Response To Stress Differentiates Heterogeneous Cancer Cells With Varying Metastatic Potential, Kinan Alhallak

Biomedical Engineering Undergraduate Honors Theses

Intratumoral heterogeneity is ubiquitously present within primary tumors and contributes to intractable behaviors such as metastasis and mutability spatiotemporally. Mounting evidence has shown that heterogeneous cell populations can adversely affect cell metabolism and metastatic potential. The cell’s only fluorescent molecules within the electron transport chain, flavin adenine dinucleotide (FAD) and nicotinamide adenine dinucleotide (NADH), can allow the quantitation of cell metabolism. We demonstrate the use of the optical redox ratio (FAD/(NADH+FAD)) to determine the metabolic behaviors of a heterogeneous panel of cells with varying metastatic programs at normal conditions and following acute hypoxia. At normal conditions, we reveal an attenuation …


Role Of Trpv4 In Astrocyte Extracellular Matrix Production, Abby Terlouw May 2017

Role Of Trpv4 In Astrocyte Extracellular Matrix Production, Abby Terlouw

Biomedical Engineering Undergraduate Honors Theses

Traumatic Brain Injury (TBI) is an alteration of brain pathology following damage of the central nervous system (CNS) by an external force. In the CNS, glial scar formation often occurs following TBI, and astrocytes are widely believed to contribute to this scar formation. While the role of astrocytes in extracellular matrix (ECM) production is known, the exact mechanism(s) for this event remain unclear. One possible method is the activation of transient receptor potential vanilloid 4 (TRPV4). TRPV4 is a channel protein found in the astrocyte membrane which has been shown to generate intracellular calcium ions following mechanical stimulation. Previous research …


Characterization Of Murine Breast Cancer Cell Lines For Anti-Cancer Vaccine, Haven N. Frazier May 2017

Characterization Of Murine Breast Cancer Cell Lines For Anti-Cancer Vaccine, Haven N. Frazier

Biological Sciences Undergraduate Honors Theses

Breast cancer is the most commonly diagnosed cancer in women and the second leading cause of cancer death among women in the United States (1). While treatments involving radiation and chemotherapy currently exist, disease must be detected early in order for the treatments to be somewhat effective, and there is no effective treatment after metastasis occurs (2). Additionally, current therapies do not mitigate tumor immunosuppression. Decreasing the tumor-associated immunosuppressive conditions while activating antitumor immunity could prevent recurrence and metastasis, possibly leading to an effective treatment for cancer (3). Tumor cell vaccines could possibly address this issue and have become a …


Monitoring Heart Rate Variability In Relation To Sleep Quality, Yi-Tzu Wang May 2017

Monitoring Heart Rate Variability In Relation To Sleep Quality, Yi-Tzu Wang

Theses and Dissertations

The development and analysis of heart rate variability for sleep quality monitoring have been concerned for many years in human being. Sleep is a physiological process that is essentially maintaining the function of human body. Heart rate variability have undergone much-needed development to assess the effects such as sleep disorder, insomnia, high blood pressure, stress and even diabetes. Accurately evaluating physiological signals that are practical to measure the sleep quality in individuals monitoring heart rate variability is an important activation of diverse biological systems during sleep. A noteworthy role of measuring the heart rate variability is played by the autonomic …


The Impact Of Different Propagation Environments On The Performance Of Wireless Sensor Networks, Abdallah Mubark Aldosary May 2017

The Impact Of Different Propagation Environments On The Performance Of Wireless Sensor Networks, Abdallah Mubark Aldosary

Theses and Dissertations

This dissertation presents a methodology for evaluating the performance of wireless sensor network (WSN) protocols in different propagation environments. To create this methodology, practical RF propagation models that include many of the substantial features of different propagation environments are utilized, and radio energy models for different propagation environments are developed. Accurate environment-specific radio frequency (RF) propagation models should be utilized in order to improve the overall process of decision-making during pre-deployment of WSNs, to facilitate the deployment of the WSN, and to enhance the battery efficiency of sensing nodes so that the network lifetime can be prolonged. The investigating of …


Application-Driven Traffic Sensor System Acceptance Tests For Intelligent Transportation Systems, Thiago Goncalves Pereira Mendonca May 2017

Application-Driven Traffic Sensor System Acceptance Tests For Intelligent Transportation Systems, Thiago Goncalves Pereira Mendonca

Theses and Dissertations

Transportation agencies strive to keep people and goods moving. Operation and maintenance of transportation infrastructure is key to accomplish their objectives. Intelligent Transportation Systems (ITS) applications rely on massive detection grids that collectively demand significant maintenance resources. Resource constraints force transportation agencies to look for innovative ways to optimize their operational and maintenance costs while serving their users at intended performance levels. This paper presents a Systems Engineering (SE) view to derive traffic detection sensor requirements for components and subsystems based on application-specific needs. The goal of the approach is to obtain stakeholders view of an acceptable performance based on …


An Extrinsic Fabry-Perot Interferometric Sensor Using Intermodal Phase Shifting And Demultiplexing Of The Propagating Modes In A Few-Mode Fiber, Julius Chatterjee May 2017

An Extrinsic Fabry-Perot Interferometric Sensor Using Intermodal Phase Shifting And Demultiplexing Of The Propagating Modes In A Few-Mode Fiber, Julius Chatterjee

Theses and Dissertations

This dissertation demonstrates a fiber-optic phase shifted Fabry-Perot interferometer (PS-FPI) as a sensor using modal demultiplexing. Single wavelength Fabry-Perot interferometers suffer from fringe ambiguity and loss of sensitivity at fringe extremes. These hindrances cause it to be a secondary choice when being selected for a measurement task at hand, and more often than not, white light based sensors are selected in favor of the single wavelength Fabry-Perot sensors. This work aims to introduce a technique involving the demultiplexing of the propagating linearly polarized (LP) modes in few mode fibers to obtain two fringe systems from the same sensing cavity. This …


Planar Electromagnetic Band Gap For Broadband Switching Noise Mitigation In High-Speed Pcb, Kevin H. Nguyen May 2017

Planar Electromagnetic Band Gap For Broadband Switching Noise Mitigation In High-Speed Pcb, Kevin H. Nguyen

Theses and Dissertations

Electromagnetic band gap (EBG) structure with novel meandered lines for mitigation of simultaneous switching noise (SSN) from multiple switch mode power supplies on a high speed digital circuit card assembly is investigated. The electromagnetic band gap structure is designed for a wideband operation from 200 MHz to 15 GHz. The application interest for this planar structure can be used as high impedance surfaces to suppress EMI noise for EMC compliance in Mil-Std-461, which is an electromagnetic compatibility standard for military equipment operating in the frequency range from 10 KHz to 18 GHz. ANSYS HFSS was used for simulation of these …


Cfd Analysis Of Resistance Characteristics Of High-Speed Displacement Hull Forms Fitted With Hull Vane®, Venkata Karthik Avala May 2017

Cfd Analysis Of Resistance Characteristics Of High-Speed Displacement Hull Forms Fitted With Hull Vane®, Venkata Karthik Avala

Theses and Dissertations

Improving the performance and resistance of a high-speed monohull forms has been of interest to Naval Architects for several decades. A considerable amount of research has been carried out in this area by using stern flaps and other appendages. This research thesis investigates the resistance characteristics of high-speed round bilge hull forms fitted with a Hull Vane® in the stern region of the vessel. The Hull Vane® is a fixed foil located below the waterline at the aft of the stern of the vessel. The Hull Vane® reduces the generation of waves at the aft and improves the vessel's motions. …


Designing The Technological World Through Biomimicry, Emily Yoshikawa, Greg J. Strimel, Scott R. Bartholomew May 2017

Designing The Technological World Through Biomimicry, Emily Yoshikawa, Greg J. Strimel, Scott R. Bartholomew

Faculty Publications

Scientific discoveries are a driver for advancing our technological world (ITEA/ITEEA; 2000/2002/2007). As more knowledge is acquired through scientific inquiry, people can better design and develop technological inventions and innovations (Knowles, Kelley, & Hurd, 2016). In turn, these novel technologies can aid in making new scientific discoveries, thus driving an ongoing cycle of technological advancement. However, in the process of designing and advancing our technological world, people can turn to the study of life and its phenomena to inspire and inform their designs. Nature is functional as well as beautiful. As we study the phenomena or functions of living organisms …


Engaging Children In Engineering Design Through The World Of Quadcopters, Greg J. Strimel, Scott R. Bartholomew, Eunhye Kim May 2017

Engaging Children In Engineering Design Through The World Of Quadcopters, Greg J. Strimel, Scott R. Bartholomew, Eunhye Kim

Faculty Publications

The interest in engineering education for K-12 students has been rising (Carr, Bennett IV, & Strobel, 2012; Strimel, Grubbs, & Wells, 2016), and the importance of engineering education is discussed as early as the elementary school level (Hegedus, 2014). Petroski (2003) claims that children are ready to learn engineering because their play activities are similar to engineering and design activities, such as making, moving, and rearranging things. Studies have examined how elementary school students perceive engineering or engineers (Cunningham, Lachapelle, & Lindgren-Streicher 2005) and found that elementary-aged students associated engineering with repairing, installing, driving, constructing, and improving machines and devices. …


Optimization Framework For Deployment Of Wireless Sensor Networks, Tajudeen Olawale Olasupo May 2017

Optimization Framework For Deployment Of Wireless Sensor Networks, Tajudeen Olawale Olasupo

Theses and Dissertations

In order to tackle the problem of network connectivity and sensing coverage in random placement of sensor nodes over an area of interest, this research presents an optimization and visualization framework for characterization and prediction of optimal deployments of large-scale wireless sensor networks (WSNs). This study presents efficient image processing algorithms for classification of deployment terrain in order to optimize deployment and connectivity coverage with required minimum number of nodes and transmission power. It reports formation of efficient models for WSN signal propagation under different terrain conditions. The study describes the developmental approach of the WSN optimization framework and visualization …


Short-Circuit Protection For Low-Voltage Dc Distribution Systems Based On Solid-State Circuit Breakers, Sharthak Munasib May 2017

Short-Circuit Protection For Low-Voltage Dc Distribution Systems Based On Solid-State Circuit Breakers, Sharthak Munasib

Graduate Theses and Dissertations

Proper short-circuit protection in dc distribution systems has provided an austere challenge to researchers as the development of commercially-viable equipment providing fast operation, coordination and reliability still continues. The objective of this thesis is to analyze issues associated with short-circuit protection of low-voltage dc (LVDC) distribution systems and propose a short-circuit protection methodology based on solid-state circuit breakers (SSCBs) that provides fault-current limiting (FCL). Simulation results for a simplified notional 1-kVdc distribution system, performed in MATLAB/SIMULINKTM, would be presented to illustrate that SSCB solutions based on reverse-blocking integrated gate-commutated thyristors (RB-IGCT) are feasible for low-voltage dc distribution systems but requires …


Power Efficient High Temperature Asynchronous Microcontroller Design, Nathan William Kuhns May 2017

Power Efficient High Temperature Asynchronous Microcontroller Design, Nathan William Kuhns

Graduate Theses and Dissertations

There is an increasing demand for dependable and efficient digital circuitry capable of operating in high temperature environments. Extreme temperatures have adverse effects on traditional silicon synchronous systems because of the changes in delay and setup and hold times caused by the variances in each device’s threshold voltage. This dissertation focuses on the design of the major functionality of an asynchronous 8051 microcontroller in Raytheon’s high temperature Silicon Carbide process, rated for operation over 300ºC. The microcontroller is designed in NULL Convention Logic, for which the traditional bus architecture used for data transfer would consume a large amount of power. …


Silicon Germanium Bicmos Comparator Designed For Use In An Extreme Environment Analog To Digital Converter, Benjamin Riley Sissons May 2017

Silicon Germanium Bicmos Comparator Designed For Use In An Extreme Environment Analog To Digital Converter, Benjamin Riley Sissons

Graduate Theses and Dissertations

This thesis demonstrates the process of creating a radiation hardened and extreme temperature operating comparator from start to finish in the 90 nm SiGe 9HP process node. This includes the entire design flow from examining comparator topologies, to designing the initial comparator circuits, to simulating the comparator over a temperature range of -196°C to 125°C, and finally the testing of the fabricated circuit. To verify the circuit would work at low temperatures, several new device models were created that could be used for simulations at -196°C. In addition to its properties as a standalone comparator, the circuit was also used …


Molecular Dynamics Simulations Of Dna-Functionalized Nanoparticle Building Blocks On Gpus, Tyler Landon Fochtman May 2017

Molecular Dynamics Simulations Of Dna-Functionalized Nanoparticle Building Blocks On Gpus, Tyler Landon Fochtman

Graduate Theses and Dissertations

This thesis discusses massively parallel molecular dynamics simulations of nBLOCKs using graphical processing units. nBLOCKs are nanoscale building blocks composed of gold nanoparticles functionalized with single-stranded DNA molecules. To explore greater simulation time scales we implement our nBLOCK computational model as an extension to the coarse grain molecular simulator oxDNA. oxDNA is parameterized to match the thermodynamics of DNA strand hybridization as well as the mechanics of single stranded DNA and double stranded DNA. In addition to an in-depth review of our implementation details we also provide results of the model validation and performance tests. These validation and performance tests …