Engineering Commons^™

Designing For Standardizing On Six Sigma Education, Jing Lu, Chad Laux, Aswathy Suresh

International Conference on Lean Six Sigma

This study evaluated differing sources of the Lean Six Sigma body of knowledge with the purpose of standardizing on learning outcomes for a Black Belt graduate level course.

Effect Of Surface Modifying Biopolymers On Sand Cohesion, Connor H. Ligeikis

Honors Scholar Theses

Coastal erosion is a substantial problem in the United States and throughout the world. A novel approach to mitigating this problem is through the application of surface-modifying biopolymers to sand on beaches. Field research conducted by Dr. Amine Dahmani has shown that these organic complexes can coat granular sediments and increase sediment cohesion, thereby decreasing the erodability of the sediment. The goal of this thesis is to quantify the impact of proprietary surface-modifying biopolymer formulations on sand cohesion in order to better engineer this innovative solution for sand retention and potentially contaminated sediment sand cap stabilization. The impact of the …

An Investigation Of The Use Of Cerium And Polyhedral Oligomeric Silsesquioxanes For The Protection Of Polymeric Epoxy Compounds In The Low Earth Orbit Environment, Jessica Miriam Piness

Dissertations

Low Earth orbit presents many hazards for composites including atomic oxygen, UV radiation, thermal cycling, micrometeoroids, and high energy protons. Atomic oxygen and vacuum ultraviolet radiation are of concern for space-bound polymeric materials as they degrade the polymers used as matrices for carbon fiber composites, which are used in satellites and space vehicles due to their high strength to weight ratios. Epoxy-amine thermosets comprise a common class of matrix due to processability and good thermal attributes. Polyhedral oligomeric silsesquioxanes (POSS) have shown the ability to reduce erosion in polyimides, polyurethanes, and other polymers when exposed to atomic oxygen. The POSS …

Formation Of Nanostructured Epoxy Networks Containing Polyhedral Oligomeric Silsesquioxane (Poss) And Silica Nanoparticles, Amit K. Sharma

Dissertations

This dissertation is focused on structure-property-processing relationship studies based on well-defined polyhedral oligomeric silsesquioxane (POSS) modified epoxy networks to present a comprehensive understanding of hybrid network behavior. In this research, a monoamine functional POSS molecule is incorporated into the epoxy monomer as pendant unit to mimic common epoxy structures and then crosslinked to form well-defined epoxy hybrid networks. The POSS cages behave as nanosized pendant unit in the epoxy matrices, while the mass fraction of POSS cages is varied and the effects on physical properties are examined with respect to changes in network architecture.

A novel continuous reactor method is …

Design And Synthesis Of Polymer Brush Surfaces With Complex Molecular Architectures And Morphologies, Wei Guo

Dissertations

The combination of surface-initiated polymerization (SIP) and postpolymerization modification (PPM) is a powerful technique for the fabrication of functional soft surfaces. Better understanding the influence of the aforementioned factors on the PPM effectiveness is valuable for fulfilling the potential of the PPM approach for the fabrication of functional soft surfaces. Specifically, by carefully balancing modification reactivity and limitation of mass transport, polymer brush with composition heterogeneity and gradient along the normal direction of the surface otherwise unattainable by methods of direct polymerization can be fabricated via the PPM approach which opens doors to new routes to polymer brush with complex …

Effect Of Chain Rigidity On Network Architecture And Deformation Behavior Of Glassy Polymer Networks, Kyler Reser Knowles

Dissertations

Processing carbon fiber composite laminates creates molecular-level strains in the thermoset matrix upon curing and cooling which can lead to failures such as geometry deformations, micro-cracking, and other issues. It is known strain creation is attributed to the significant volume and physical state changes undergone by the polymer matrix throughout the curing process, though storage and relaxation of cure-induced strains remain poorly understood. This dissertation establishes two approaches to address the issue. The first establishes testing methods to simultaneously measure key volumetric properties of a carbon fiber composite laminate and its polymer matrix. The second approach considers the rigidity of …

Polyisobutylene Telechelic Prepolymers By In Situ End-Quenching And Post-Polymerization Modifications, Bin Yang

Dissertations

This volume focuses on the development of telechelic polyisobutylene (PIB) prepolymers by combining end-capping of living carbocationic polymerization of isobutylene (IB) with suitable reactants and post-polymerization modifications. Alkylation kinetics of PIB tert-chloride with alkoxybenzenes using either TiCl₄ or AlCl₃ were investigated. Quantitative para-position end-capped products were only achieved if the alkoxybenzene/AlCl₃ molar ratio was greater than unity; while no such molar ratio is required for TiCl₄, but the alkylation rate was slower than AlCl₃ under the same conditions. Photopolymerization kinetics analysis of PIB triphenol tri(meth)acrylates with low and high M_ns, …

Supervisory Controls Strategy To Reduce Utility Factor Weighted Criteria Emissions For A Plug-In Hybrid Electric Vehicle, Thomas Francis Gorgia Iii

Doctoral Dissertations and Master's Theses

Criteria emission reduction techniques are being more sought out in the automotive industry due to current government regulation for light duty vehicles. Parallel-series plug in hybrid electric vehicles can have multiple strategies to balance emissions and fuel consumption. Common controls strategies in industry target fuel economy by using a large electric vehicle range, known as charge depletion, followed by maintaining a state of charge after a specific vehicle threshold, or charge sustaining. A charge preserve strategy works by running an engine at an optimal loading condition, the engine will burn the fuel more complete reducing criteria emissions. Charge preserve will …

Discrete Element Analysis Of Scb Variability: Asphalt Mixtures, David Saul Renteria

Theses and Dissertations

The Semi-Circular Bending (SCB) test was modeled using the Discrete Element Method (DEM) implemented in numerical software Particle Flow Code (PFC). The fracture analysis of the SCB was studied using two mixtures gradation, Superpave and Coarse Matrix High Binder. The aggregate phase in the model was achieved by using two-dimensional aggregate images with different angularity indexes. The study of the variability of the SCB extends to the random generation of aggregate particles and air voids in the model, in addition to changing the properties at the interface between the aggregate and mastic phases. Results indicate the strong influence of the …

Bs News May/June

Building Services Engineering

No abstract provided.

Common Treatments And Procedures Used For Fractures Of The Distal Radius And Scaphoid: A Review, Basel A. Khader, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

The distal radius and the scaphoid are the most commonly injured carpal bones among both active adults and the osteoporotic elderly. The purpose of surgical treatment is to restore form and function to the wrist. Depending on the nature of the fracture, either topical procedures or invasive surgery can be applied. This article critiques the treatments currently used for fixation of wrist fractures in order to drive the development of new materials to improve patient outcomes.

Multidisciplinary Shape Optimization Of A Composite Blended Wing Body Aircraft, Charles Maxwell Boozer

Theses and Dissertations

A multidisciplinary shape optimization tool coupling aerodynamics, structure, and performance was developed for battery powered aircraft. Utilizing high-fidelity computational fluid dynamics analysis tools and a structural wing weight tool, coupled based on the multidisciplinary feasible optimization architecture; aircraft geometry is modified in the optimization of the aircraft’s range or endurance. The developed tool is applied to three geometries: a hybrid blended wing body, delta wing UAS, the ONERA M6 wing, and a modified ONERA M6 wing. First, the optimization problem is presented with the objective function, constraints, and design vector. Next, the tool’s architecture and the analysis tools that are …

The Development Of A Vacuum Forming System For Kydex® And Other Thermoplastic Sheet, Andrew G. Smith

Electronic Theses and Dissertations

Vacuum forming is a popular, cost effective method amongst large and small scale applications. The method is used to mold a material to the surface of a mold/pattern in order to create a negative copy for reproduction or an object in positive form. The prototype vacuum forming system developed and documented herein is of a membrane-seal type that consists of three (3) principle parts: radial platen, Hinged Frame and Platen Support Assembly, and a PVC surge tank. Each part is described in detail through design, manufacturing, and testing processes. The design supports functional versatility, small scale molding, and uses readily …

In Situ Electron Microscopy Of Plasmon-Mediated Nanocrystal Synthesis, Peter Sutter, Ying Li, Christos Argyropoulos, Eli A. Sutter

Department of Electrical and Computer Engineering: Faculty Publications

Chemical processes driven by nonthermal energy (e.g., visible light) are attractive for future approaches to energy conversion, synthesis, photocatalysis, and so forth. The growth of anisotropic metal nanostructures mediated by excitation of a localized surface plasmon resonance (LSPR) is a prototype example of such a reaction. Important aspects, notably the growth mechanism and a possible role of plasmonic “hot spots” within the metal nanostructures, remain poorly understood. Here, we use in situ electron microscopy to stimulate and image the plasmon-mediated growth of triangular Ag nanoprisms in solution. The quantification of the time-dependent evolution of the lateral size and thickness of …

Contactless Charging Adapter, Kevin Nguyen, Emmett Stetz, Joseph Pacheco

Electrical Engineering

Currently, most cell phones utilize wired adapters to charge, which cause a minor hassle when one frequently needs to unplug and replug their device whenever they pick it up to use while it is charging. The charging adapter is a pad that phones can be placed on to wirelessly charge the device. The charging adapter consists of two components: the wireless charging platform to supply and transmit the power, and the wireless charging receiver for phones that do not already have an internal receiver included, specifically targeting newer generation iPhones that utilize a lightning port (i.e. iPhone 5, 6, 6s, …

2017 Spring Graduate Recognition Program, Propulsion Research Center, Robert Frederick

PRC Graduate Recognition

This program includes the graduate recognition program for spring 2017. Includes photographs, upcoming events, recent publications, and student profiles.

Using An Altimeter-Derived Internal Tide Model To Remove Tides From In Situ Data, Edward D. Zaron, Richard D. Ray

Civil and Environmental Engineering Faculty Publications and Presentations

Internal waves at tidal frequencies, i.e., the internal tides, are a prominent source of variability in the ocean associated with significant vertical isopycnal displacements and currents. Because the isopycnal displacements are caused by ageostrophic dynamics, they contribute uncertainty to geostrophic transport inferred from vertical profiles in the ocean. Here it is demonstrated that a newly developed model of the main semidiurnal (M2) internal tide derived from satellite altimetry may be used to partially remove the tide from vertical profile data, as measured by the reduction of steric height variance inferred from the profiles. It is further demonstrated that the internal …

Flexsar Bistatic And Monostatic Circular Sar Collection, Chad Knight, Mark Jensen, Trevor Jewkes, Jacob Gunther

Space Dynamics Laboratory Publications

Bistatic SAR data has advantages and disadvantages compared to monostatic data. This papers examines a combined bistatic and monostatic SAR data collection. The airborne platform used a monostatic radar system with two transmit and two receive channels in a pulsed spotlight mode. Another receive-only system was placed on an elevated mountaintop. The mountaintop receive system had two receive channels. The airborne asset flew in a full circle around several targets, exercising a large range of bistatic geometries. Various SAR modes were collected, including single-channel, quad-channel, and along-track interferometry (ATI) data for monostatic and bistatic modalities. This paper focuses on the …

Evaluation Of Electrocoagulation For Chloride And Ammonium Removal From The Reject Brine Effluent Pretreated By Solvay Process, Miada Abubaker Ali

Theses

Excessive use of desalination, due to the increase in freshwater demand, results in large productions of reject brine. Therefore, the development of an efficient treatment process of the reject brine becomes vital. The Solvay process is one of the main treatment technologies, wherein NH₃ is introduced to convert soluble Na⁺ into insoluble NaHCO₃. However, in this process, Cl^- is not removed and NH₄⁺ is introduced, and therefore electrocoagulation has been proposed for their removal. The experiment was designed using Minitab with different initial concentrations of chloride (7400 – 32600 mg/l), current densities (0.033 …

A Data-Driven Approach For Benchmarking Energy Efficiency Of Warehouse Buildings, Wee Leong Lee, Kar Way Tan, Zui Young Lim

Research Collection School Of Computing and Information Systems

This study proposes adata-driven approach for benchmarking energy efficiency of warehouse buildings.Our proposed approach provides an alternative to the limitation of existingbenchmarking approaches where a theoretical energy-efficient warehouse was usedas a reference. Our approach starts by defining the questions needed to capturethe characteristics of warehouses relating to energy consumption. Using an existingdata set of warehouse building containing various attributes, we first cluster theminto groups by their characteristics. The warehouses characteristics derivedfrom the cluster assignments along with their past annual energy consumptionare subsequently used to train a decision tree model. The decision tree providesa classification of what factors contribute to different …

Cryptography And Data Security In Cloud Computing, Zheng Yan, Robert H. Deng, Vijay Varadharajan

Research Collection School Of Computing and Information Systems

Cloud computing offers a new way of services by re-arranging various resources and providing them to users based on their demands. It also plays an important role in the next generation mobile networks and services (5G) and Cyber-Physical and Social Computing (CPSC). Storing data in the cloud greatly reduces storage burden of users and brings them access convenience, thus it has become one of the most important cloud services. However, cloud data security, privacy and trust become a crucial issue that impacts the success of cloud computing and may impede the development of 5G and CPSC. First, storing data at …

A Multi-Agent System For Coordinating Vessel Traffic, Teck-Hou Teng, Hoong Chuin Lau, Akshat Kumar

Research Collection School Of Computing and Information Systems

Environmental, regulatory and resource constraints affects the safety and efficiency of vessels navigating in and out of the ports. Movement of vessels under such constraints must be coordinated for improving safety and efficiency. Thus, we frame the vessel coordination problem as a multi-agent path-finding (MAPF) problem. We solve this MAPF problem using a Coordinated Path-Finding (CPF) algorithm. Based on the local search paradigm, the CPF algorithm improves on the aggregated path quality of the vessels iteratively. Outputs of the CPF algorithm are the coordinated trajectories. The Vessel Coordination Module (VCM) described here is the module encapsulating our MAPF-based approach for …

Discovering Your Selling Points: Personalized Social Influential Tags Exploration, Yuchen Li, Kian-Lee Tan, Ju Fan, Dongxiang Zhang

Research Collection School Of Computing and Information Systems

Social influence has attracted significant attention owing to the prevalence of social networks (SNs). In this paper, we study a new social influence problem, called personalized social influential tags exploration (PITEX), to help any user in the SN explore how she influences the network. Given a target user, it finds a size-k tag set that maximizes this user’s social influence. We prove the problem is NP-hard to be approximated within any constant ratio. To solve it, we introduce a sampling-based framework, which has an approximation ratio of 1−ǫ 1+ǫ with high probabilistic guarantee. To speedup the computation, we devise more …

Symbol Salience Affects Change Detection Performance In General Aviation Weather Displays, Adam A. Hruszczyk

Theses and Dissertations

General aviation pilots perform many tasks during a flight such as navigating a route, performing 'see and avoid', operating the radio and navigational instruments, viewing charts and approach plates, and scanning and interpreting their flight instruments. In addition to these tasks, pilots may utilize a cockpit weather presentation to monitor weather information for areas along the route of flight. Due to the complexity of most modern weather displays, information changes may go unnoticed. The objective of this study was to examine how saliency characteristics such as line color, thickness, and orientation affected an observer’s change detection performance and response time. …

Exploring Usability In Web-Based Aviation Weather: An Assessment Of The Aviation Weather Center Website, Benjamin Remy

Theses and Dissertations

To provide a starting point for usability research in the area of online aviation weather, we performed a two-part usability study of the popular Aviation Weather Center website for general aviation users. The first part of the study utilized the System Usability Scale to examine different types of weather information as used by a general aviation pilot on a VFR cross-country flight and compare the usability of the information to an existing benchmark. No scores were significantly less than the benchmark, but the ordering of weather information by usability score provided valuable insight into the relationship between usability and pilot …

The Effects Of Laser Eye Protection On Color Recognition And Discrimination, Sherisse Melanie Pierre

Theses and Dissertations

The number of reported laser strikes on aircraft has increased over the years. Laser strikes pose a threat to safety and thus, warrant attention and mitigation efforts. Laser Eye Protection (LEP) is one mitigation method available to pilots; however, LEP can affect a person’s color vision. When wearing the LEP pilots should be able to retain sufficient color recognition and discrimination abilities. This exploratory study investigates the effect of LEP on color recognition and discrimination of four colors, red, blue, green, and amber, using a sample of 90 participants. When using the LEP the majority of participants were able to …

Single Waypoint Zem/Zev Based Closed-Loop Controller Design For Rendezvous With A Rotating Target, Armando Alvarez Rolins

Theses and Dissertations

The research presented in this thesis addresses a very specific kind of autonomous rendezvous procedure between two spacecraft in close proximity, namely that in which the chaser object is attempting to dock at a location on a rotating target which is tracing a circle perpendicular to the axis of rotation. The approaches that have been mentioned in literature which focus on this specific condition make use of offline optimization algorithms to plot the trajectory of the chaser and use closed-loop control to follow that trajectory. This method is computationally demanding and does not allow for feedback in the desired boundary …

Takeoff And Landing Distance Measurement: An Evaluation Of Laser Altimetry For The Collection Of Absolute Aircraft Altitude, Christopher John Kennedy

Theses and Dissertations

The measurement of takeoff and landing distance during flight testing of general aviation aircraft requires the accurate measurement of aircraft position over the ground and altitude up to 50 feet above surface elevation. Current methods of evaluating takeoff and landing distances include cinetheodolites, laser and radar trackers, and Differential Global Positioning Systems (DGPS). The use of laser altimetry to range altitude above the ground originated with military and agricultural aircraft. The AgLaser laser module was an infrared laser ranging unit designed for agricultural aircraft to gauge optimal spray height above a field. The AgLaser system has a stated accuracy of …

Assessing The Effects Of Sensitizing Tungsten Oxide With Zinc Telluride, Chengeto Kazuva

Theses and Dissertations

This thesis is a comparison study of the performance of plain tungsten oxide (WO₃) thin films and tungsten oxide thin films sensitized with zinc telluride (ZnTe) as photoelectrocatalysts. Tungsten oxide and zinc telluride are semiconductors which were prepared on indium tin oxide (ITO) coated glass, and subsequently studied for water splitting applications. The main method of synthesis employed was electrochemical deposition. Tungsten oxide thin films were deposited from a precursor solution of peroxotungstic acid while the zinc telluride thin films were deposited from a solution containing dissolved zinc sulfate heptahydrate, sulfuric acid and tellurium dioxide. Surface morphology, film composition and …

Synthesis And Characterization Of 3-D Tissue Engineered Tumor Models For Melanoma Study And Extracellular Matrix Investigation, Joseph L. Spano

Theses and Dissertations

Introduction: Melanoma is the deadliest form of skin cancer, projected to claim over 9,700 American lives and necessitate $3.3 billion in care and treatment costs in 2017. In order to reduce the socioeconomic burdens and lessen cancer-related mortality and morbidity, advancements in early-stage diagnostics and treatments are essential. Two-dimensional (2-D) tissue culture treated plastics (TCTP) are reductionist in vitro models that are commonly used in drug development and preclinical drug evaluation. These models poorly recapture the native tumor microenvironment (TME), providing unrealistic growth conditions, and are thus poorly suited to measure the efficacy of newly emerging therapies. We have developed …