Engineering Commons^™

Identity And Function Of A Cardiac Mitochondrial Small Conductance Ca2+-Activated K+ Channel Splice Variant, Meiying Yang, Amadou K. S. Camara, Mohammed Aldakkak, Wai-Meng Kwok, David F. Stowe

Biomedical Engineering Faculty Research and Publications

We provide evidence for location and function of a small conductance, Ca²⁺-activated K⁺ (SK_Ca) channel isoform 3 (SK3) in mitochondria (m) of guinea pig, rat and human ventricular myocytes. SK_Ca agonists protected isolated hearts and mitochondria against ischemia/reperfusion (IR) injury; SK_Ca antagonists worsened IR injury. Intravenous infusion of a SK_Ca channel agonist/antagonist, respectively, in intact rats was effective in reducing/enhancing regional infarct size induced by coronary artery occlusion. Localization of SK3 in mitochondria was evidenced by Western blot of inner mitochondrial membrane, immunocytochemical staining of cardiomyocytes, and immunogold labeling of isolated mitochondria. …

Focusing On Equity In Regional Plans, Kristine M. Williams

TREC Project Briefs

Metropolitan planning organizations (MPOs) have long been required to consider the equity implications of their regional transportation plans and processes.

Focusing On Writing To Learn Approach To Increase Engagement And Performance In Digital Design Lab, Salman Siddiqui, Rami Haddad, Mohammad Ahad

Electrical & Computer Engineering: Faculty Publications

In an effort to help students in the discipline build on their writing skills throughout the undergraduate curriculum, Georgia Southern University initiated a quality enhancement plan (QEP) with a focus on writing across the Electrical Engineering curriculum. As part of this plan, the Digital Design Lab course, offered at the sophomore level in the curriculum, implemented several strategies to help students build on their previous writing skills, and in the process improved their technical vocabulary, the ability to communicate using it, increased students’ engagement, collaboration, and performance in the course. In this work, the effect of deliberately engaging students in …

Quasistatic Error Modeling And Model Testing For A 5-Axis Machine, H-W. Ko, P. Bazzoli, Jared Adam Nisbett, L. Ma, Douglas A. Bristow, Robert G. Landers, Y. Chen, S. Kapoor, P. F. Ferreira

Mechanical and Aerospace Engineering Faculty Research & Creative Works

No abstract provided.

Acceleration Amplitude Control System For Oscillating Silicon Oil Physics Experiment, Eric Chen

Electrical Engineering

This project is an ‘acceleration amplitude control system’ for use in an ‘oscillating silicon oil physics experiment’. The physics experiment has a tray of silicon oil. This tray must oscillate vertically at a specific amplitude (either at or just below the level for Faraday Waves). This control systems manages taking measurements of acceleration amplitude, and also manages correcting the shaker’s driving signal to obtain the correct acceleration. Features of the control system are designed for ease of use, because the system will mostly be operated by professor/ students without background knowledge in electrical engineering.

Wireless Audio Bridge, Daniel L. Hodges

Electrical Engineering

Bluetooth, a wireless technology standard used to exchange data using radio transmissions, has made a significant impact on the audio technology industry, specifically the way people listen to music. This technology enables a wireless listening experience, eliminating the need for wires or cables between audio devices as previously required. Audio can transmit from a cellphone or laptop (an output device) to a pair of headphones or speakers (an input device) without any physical connection. Compared to alternative wireless listening solutions (i.e. FM transmitter, radio broadcast), Bluetooth offers greater reliability, audio fidelity, portability, and ease of use. To obtain this functionality, …

Hybrid Water Pump, Dylan W. Grant, Wei Chen Yeh

Electrical Engineering

This project seeks to use multiple sources to power a water pump. We will design a system which will combine inputs from solar and wind energy production to ensure the pump will have enough power to run. This will create a system powered by clean energy and will be self-sustained once completed. This will theoretically create a more sustainable source of power for the pump than only one of the sources. Because the power sources don’t require outside inputs (aside from sun and wind), the pump can be placed in a remote area. This could be very helpful in developing …

Ecg Classification Using Adaptive Neuro-Fuzzy Inference System, Jason N. Rivera, Kelsey C. Rodriguez

Electrical Engineering

ECG classification using Adaptive Neuro-Fuzzy Inference System (ANFIS), sponsored by Professor Yu, involves the diagnosis of six cardiovascular conditions by analyzing one single neural network. Today’s ECG signal instrumentation does not have the ability to characterize cardiovascular diseases without a doctor’s complete evaluation and diagnosis. Our project gives a promising solution to the inability in the current market’s ECG signal instrumentation to correctly evaluate and diagnose cardiovascular diseases. ECG signal reportings is a non-invasive process that will lead to many more applications of advanced signal processing and data analysis/diagnosis of cardiovascular diseases. The inputs to the ANFIS are annotations of …

Dc House Energy Management System, Zachary L. Eldredge, Zoe M. Hay

Electrical Engineering

In this work, a previously completed proof of concept for an Energy Management System (EMS) for the DC House project has been revised and re-implemented. The implemented design changes will improve the performance and reproducibility of the system. This new design of the EMS replaces the two-separate buck and boost DC-DC converters with a single bidirectional DC-DC converter to reduce components and improve efficiency. Analysis of the bidirectional DC-DC converter shows high efficiency especially at larger load currents. The code of the previous work was updated for smoother operation as well as to accommodate an LCD capable of displaying more …

Overview Of Game And Content Design For A Mobile Game That Will Prepare Students In Calculus And Physics Prerequisites To The Engineering Curriculum, Katherine Smith, John Shull, Patrick Sean Heaney, Yuzhong Shen, Anthony W. Dean, Jennifer G. Michaeli

VMASC Publications

As part of a research project which assists veterans as they exit the military, complete engineering degrees, and enter the workforce as engineering professionals, a range of serious games for Science, Technology, Engineering, and Mathematics (STEM) education is under development. The current focus of this development is CAPTIVATE, a serious game to assist student veterans in mastering the calculus and physics skills that are necessary prerequisites to the main engineering curriculum. Building on the development and lessons learned from MAVEN, a game developed previously to help student veterans master precalculus skills, the design and initial implementation for CAPTIVATE involves careful …

Heteromer Nanostars By Spontaneous Self-Assembly, Caitlin Brocker, Hannah Kim, Daniel Smith, Sutapa Barua

Chemical and Biochemical Engineering Faculty Research & Creative Works

Heteromer star-shaped nanoparticles have the potential to carry out therapeutic agents, improve intracellular uptake, and safely release drugs after prolonged periods of residence at the diseased site. A one-step seed mediation process was employed using polylactide-co-glycolic acid (PLGA), polyvinyl alcohol (PVA), silver nitrate, and tetrakis(hydroxymethyl)phosphonium chloride (THPC). Mixing these reagents followed by UV irradiation successfully produced heteromer nanostars containing a number of arm chains attached to a single core with a high yield. The release of THPC from heteromer nanostars was tested for its potential use for breast cancer treatment. The nanostars present a unique geometrical design exhibiting a significant …

Isolation And Culture Of Myofiber-Derived Cells From The Extensor Digitorum Longus Muscle, Ethan M. Tietze

Biomedical Engineering

Peripheral arterial occlusive disease (PAOD) involves distal artery occlusion by atherosclerotic plaques, which restricts blood flow and leads to ischemia in downstream tissues. Increased blood flow through preexisting collateral vessels leads to increased shear stress that triggers an outward remodeling of the vessel called arteriogenesis. In some cases this natural compensatory mechanism is able to sufficiently restore blood flow following arterial occlusion. However, for many individuals this process is insufficient to relieve peripheral ischemia, and patients experience intermittent claudication, or limb pain with locomotion or exercise. Without treatment, reduced blood flow can lead to tissue necrosis and potentially amputation. The …

Kettle Cooling And Sustainability Project, Nico Degiorgio

BioResource and Agricultural Engineering

A particular frozen food processing facility uses a once-through cooling process to bring their kettle-cooked product’s temperature down from nearly boiling temperatures to the eighty degree Fahrenheit range. This process is water intensive and facility managers are seeking to reduce their potable water consumption. Sales engineers from Air Treatment Corporation, an HVAC&R manufacturers’ rep, initiated a number of meetings to propose heat rejection solutions and illustrate their associated payback potentials.

This report contains methods of analyzing a food production process, the technical sales process, thermodynamic principles, refrigeration technologies, and the application of technical knowledge to provide a long-term, system solution. …

Economic Impact Analysis Of Bridge Construction, Funda Yavuz

Masters Theses

Traffic disruption due to bridge construction has been reduced to several hours with the development of methods characterized as Accelerated Bridge Construction (ABC). Associated risks and additional activities involved with the accelerated construction result in an increased initial project cost. This additional cost is offset by the benefits of reduced mobility impact time such as maintenance of traffic cost, life-cycle cost, and economic impact on surrounding communities and businesses as well as the ability to address seasonal limitations. Traditionally, the savings in user cost from reduced mobility impact time is used to justify the additional cost of accelerated construction implementations. …

Investigation Of Measured Cane Vibrations For Prediction Of Blind Pedestrian Performance In Surface Preview Tasks, Aaron Dean

Masters Theses

The white cane is the primary navigation tool used by many blind pedestrians, but the basic design of the cane has not changed since the 1940s. A greater understanding of the factors affecting cane performance is essential in improving the design and performance of these canes. One aspect of performance is surface texture discrimination. A study is performed to determine the effect of cane rigidity and cane swipe speed on the ability of a user to select the rougher of two surfaces with different textures. Two methods are developed to select the rougher surface using only the measured cane vibration. …

Joe On The Go, Nico Ledwith, Grayson Meurrens

Computer Engineering

The ultimate goal for this project is to design an automatic, large capacity coffee maker. The system should be able to detect when a cup or mug is in position to receive coffee, then dispense a cup’s worth (~ 8oz) of coffee. When the coffee in the urn is getting low, our system should be able to allow a person to put new coffee grounds in the top, then push a button to start the coffee brewing process. More specifically, we had to accomplish the following tasks in order to meet our goals: solving the issue of transporting water from …

Mr. Mix: The Automated Home Bartender, Brian Moore, Robert Hulbert

Computer Engineering

No abstract provided.

Deer-Vehicle Collision Avoidance, Randy S. Fung, Connie P. Ho

Computer Engineering

The targeted outcome for this project is to create and build a system that shall be placed alongside the roads where deer are often spotted in the area. The system shall detect an incoming car through a vibration sensor that is firmly mounted against the pavement or dirt road. Once movement is detected, the system will emit an ultrasonic frequency to alert the deer of potential harm. Deer shall either turn around and stop where they are at until the cars have passed. This system will interface with a vibration sensor Fung, Ho 5 that will detect a moving car …

Farmbot Rfid Integration, Laura R. Swart

Computer Engineering

The purpose of this project is to assist the company FarmBot improve their product by adding RFID tracking to the FarmBot robot. RFID tracking will allow the robot to select and pick up tool heads without any user interference.

Daily Dose, Ken H. Yasui, Joey M. Angeja

Computer Engineering

The project goal is to develop a medication and vitamin management device that will sort and dispense pre-configured amounts of pills at designated times . The main clientele of this device is the elderly community with a secondary client base of the general public. The entire system is designed from scratch, powered by US standard line voltage. The main functionalities of the device are the ability to store multiple types of pills and the ability to accurately handle user input and data transfer. The two engineering specifications that were not met included the desired pill pick up rate and dimensions …

Activsense Sidestick: A Force Sensing And Force Feedback Joystick, Kobbe Farwick

Electrical Engineering

As aircraft systems continue to become more integrated and fully electronic, hence fly-by-wire, the pilot is slowly losing the physical cues that were once relied upon for the safe operation of the aircraft. Many commercial airliners, such as Airbus, use passive sidesticks that integrate with the electronic flight controls system. These sidesticks move much like a gaming joystick which results in the pilot not having any “feel” for the aerodynamic forces present on the control surfaces. Without the force feedback of a mechanically linked control system the pilot could inadvertently stall the aircraft or place it into an unstable flight …

Automatic Standby Power-Saving Power Strip, Trung Nguyen

Electrical Engineering

The Standby Power Saving Power Strip improves on common power strip functionality. The project reduces the power loss from most electrical devices’ standby power mode, while retaining the convenience of leaving the devices plugged-in. The surge protector automatically recognizes when the plugged-in devices enter standby power mode. Then, it shuts off power to that device and automatically provides power back to the plugged-in devices, when turned on.

Lab-Scale Circuit Breaker Module For Power System Laboratories, Amanda Barley, Allen C. Scozzari, Joshua E. Chung

Electrical Engineering

In this project, a circuit breaker that can simulate different types of power system faults is redesigned, constructed, and tested. They will then be implemented in power systems laboratory courses at Cal Poly. The project’s goal is to improve a previous circuit breaker design to help students better visualize how faults affect power systems in the real world. Two main improvements are made to the previous circuit breaker design. The first improvement is to power the breaker with a typical wall outlet adapter instead of the DC source from the Cal Poly power systems laboratory test benches. This lets the …

General-Purpose Digital Filter Platform, Michael Cheng

Electrical Engineering

This senior project provides a platform for high-speed, general-purpose digital filter implementation. EE 459 currently implements digital filters using reprogrammable digital signal processor boards. These aging digital signal processors serially calculate each difference equation term. Operating at 1 Mega-sample per second, the new general-purpose platform simultaneously processes at least ten digital filtering difference equation coefficients. The platform also features an audio jack input and BNC connectors for viewing input and output signals. The filter digitizes single channel audio signals at 44.1 kHz sampling rate with 16-bit precision or 1 MHz sampling at 8-bit precision. The new reprogrammable platform includes a …

Wireless Communication For Greenhouse Environment, Chris J. Lambert, Dean T. Lockman, Ian A. Nielsen

Electrical Engineering

Modern day population growth and global climate change requires high-yield agricultural systems that can function in harsh environments. Greenhouses can maintain temperature and humidity, while serving as a protective, nurturing alternative to vulnerable farm environments. With weather effects eliminated, greenhouses provide productive environments for experimental agriculture techniques such as hydroponics and aquaculture. These methods of agriculture, specifically aquaculture, require constant monitoring. The failure of electronic devices such as an air pump prove fatal to a fish population in a short time frame. In developing countries, agricultural locations may be a significant distance from a farmer’s home, with no internet or …

Wireless Window Blinds, Cooper Laone, Niraj Morar, Zachary Malig, Jake Phillips

Electrical Engineering

The Internet of Things asserts that there exists a global need for all objects to connect easily and accessibly. Today, smartphones, tablets, laptops and smart watches makeup just a few of the interconnected devices by the greater population. As a result a growing need for wireless connection between personal devices like phones, and computers to everyday appliances exists. This idea extends directly to households, businesses and buildings, where a growing need for smart home or smart-business appliances has taken root. Many companies like Nest, ADT and Apple make products for automated home security and in home media control. The Wireless …

Hands On, Michael Le, Justin Remulla, Chris Menezes, Noah Beilin

Electrical Engineering

The goal is to design an extremely articulate smart glove, which acts a virtual reality controller. The smart glove will have gesture detection, which could include hand movements and/or combinations of finger movements to emulate mouse click or scroll, or digitally map out a hand for integrations with virtually reality softwares. This glove will have multiple accelerometer sensors on each finger and joint, connected to a single board running BLE MCU SoC in order to communicate with computer or mobile devices. The glove would connect to devices such as computers or phones using a Bluetooth dongle with applications in virtual …

Dual Input Microinverter For Tandem Cells, Forrest M. Lipske, Daniel A. Dich-Dang

Electrical Engineering

For every solar panel, there is an inverter which transforms the harvested DC electricity into AC electricity so that it can connect to the grid and power household appliances. In this project, we examined a tandem solar cell being designed by Iris Photovoltaics which has two layers with two distinct outputs, and we explored several solutions to create a microinverter which can handle dual inputs from the tandem PV and combine them into a single AC output. To examine the viability of such a microinverter, we designed and simulated the DC-DC combination portion of the specialized dual input microinverter, resulting …

Smart Safeguard, Stephen J. Marrone

Electrical Engineering

Smart Safeguard is designed to provide people with an affordable device that will notify the authorities when the buyer gets in a car crash. The device will operate off the 12V car power that is present in every car and use an accelerometer to detect if an accident has occurred. If an accident is detected the device will proceed to light up and make a noise until the passenger pushes a button on the device. If the passenger doesn’t push the button within 15 seconds the device, which is wirelessly connected to the passenger’s phone, will initiate a text to …

Adaptive Light Dimmer, Jonathan Sato, William Xiong

Electrical Engineering

This project, the Adaptive Light Dimmer for the DC House, senses a room's light content and adjusts a lamp's light intensity accordingly, thus regulating the room's light content. The device is designed to work with renewable energy sources such as wind and solar energy. This would be useful in less developed countries where AC electricity is not well spread and renewable DC, such as solar, can be better utilized. It functions by using the TSL2561 light sensor to sense light, ATTiny85 microcontroller to output PWM to the LED driver, LT3795 LED driver to output current to an LED and LT3014 …