Engineering Commons^™

Statistical Scaling Of Turbulent Surface Pressure In The Atmospheric Boundary Layer, Gregory William Lyons

Electronic Theses and Dissertations

Turbulence in the atmosphere produces fluctuations in static pressure through a variety of mechanisms. These fluctuations are of interest both to atmospheric scientists, as a fluid dynamic property, and to acousticians, as a source of wind noise. At the ground surface, previous work has found the dominant source of pressure fluctuations to be an interaction of the turbulent vertical velocity with the shear rate in the mean wind. In this work, the existing theoretical framework was extended to investigate the effects of atmospheric stability, shear anisotropy, and different turbulence models. A rapid-distortion model was introduced and compared with the existing …

An Experimental Investigation On The Effect Of Intake Charge Temperature And Injection Timing On Autoignition Of Low Cetane Number Fuel (Sasol Ipk), Swapnil Shekhar Bodele

Wayne State University Theses

ABSTRACT

AN EXPERIMENTAL INVESTIGATION ON THE EFFECT OF

INTAKE CHARGE TEMPERATURE AND INJECTION TIMING

ON AUTOIGNITION OF LOW CETANE NUMBER FUEL

(SASOL IPK)

by

SWAPNIL S BODELE

May 2016

Advisor: Dr. Naeim Henein

Major: Mechanical Engineering

Degree: Master of Science

Although diesel engines are considered the best powerhouses for their heavy-duty

capabilities, concerns have been raised because of their emission issues. Alternative

fuels like jet fuels can be substitute to them for improved efficiencies. The Department Of

Defense uses JP8 for their combat vehicles under their Single Fuel Concept for a better

logistic supply chain. However, due to the projected …

Kinematic Modeling Of An Automated Laser Line Scanning System, Kiran Sunil Deshmukh

Wayne State University Theses

This research work describes the geometric coordinate transformation in an automated laser line scanning system caused by movements required for scanning a component surface. The elements of an automated laser scanning system (robot, laser line scanner, and the component coordinate system) function as a mechanical linkage to obtain a trajectory on a component surface. This methodology solves the forward kinematics, derives the component surface, and uses inverse kinematic equations to characterize the movement of the entire automated scanning system on point trajectory. To reach a point on the component, joint angles of robot have been calculated. As a result, trajectory …

Enhancement Of Cancer Vaccine Efficacy Via Nanoparticle Or Molecular-Based Adjuvants, Myunggi An

Wayne State University Theses

Adjuvants are immunomodulators which enhance immune responses to vaccines. However, parenteral administration of unformulated adjuvants fails to reach lymph nodes (LNs), the anatomic organ where the primary functions of immune cells are orchestrated. The LN-targeting delivery plays the key roles in promoting immune activation and has the great potential to transform disease treatment. The main goal of this thesis is to develop efficient vaccine delivery systems to target therapeutics into draining lymph nodes (dLNs) for ensuring their immunostimulatory activity. We introduced therapeutic applications of activating TLR9 with synthetic CpG oligodeoxynucleotide (ODN) agonists in nanoparticle or molecular form to activate immune …

Implementation Of Camera Arm Control By An Oculus Rift On A Da Vinci Surgical System Simulation, Hamid Sadeghi

Wayne State University Theses

Camera control methods play a significant role in remote surgery. Two methods have been developed to control the camera arm of the da Vinci Surgical System: a standard clutch-based method for manual movement of the camera and an autonomous camera (auto-camera) method. In the standard method, the surgeon positions the camera manually using a pair of hand controllers. This happens frequently during the surgery and may serve as a distraction during surgical procedures. The second method was developed in order to help surgeon to remove the issue mentioned in the standard method. Auto-camera method enables the system to move the …

Novel Design And Synthesis Of Transition Metal Hydroxides And Oxides For Energy Storage Device Applications, Peifeng Li

Wayne State University Theses

Supercapacitors (SCs) and Li-ion batteries (LIBs) are two types of important electrical energy storage devices with high power density and high energy density respectively. However, to satisfy the increasing demand of high-performance energy storage devices, the energy density of SCs and power/energy densities of LIBs have to be further improved. The exploration, research, and development of electrode materials with high-performance for applications in SCs and LIBs are still needed to meet the ever-increasing demand on energy and power densities. Herein, the amorphous Ni-Co-Mo ternary hydroxides nanoflakes for SCs and oxides nanoflakes for LIBs with ultrathin stature, abundant open spaces, and …

Targeted Delivery Of Nrf2 Sirna Using Modular Polymeric Micellar Nanodelivery System For Efficient Target Gene Knockdown In Hepatocellular Carcinoma, Shaimaa Mohamed Ibrahim Yousef

Wayne State University Theses

Tumor selective drug delivery as well as chemotherapy associated multi drug resistance (MDR) pose tremendous hurdles for effective cancer therapy. In this regard, designing multifunctional nanocarriers loaded with drug/gene payloads and engineered with tumor targeting ligands can serve as a modular platform for targeted drug/gene delivery. In this study we undertook the synthesis of a self-assembling block copolymer constructed using poly(styrene-co-maleic anhydride, partial iso-octyl ester) (SMAPIE) and branched polyethylenimine (PEI) as building blocks and evaluated its micelle forming ability, siRNA complexation and siRNA delivery potentials. In addition, we engineered galactosamine decorated nanomicelles using modular “click” chemistry based approaches for evaluating …

Enhanced Pump Schedule Optimization For Large Water Distribution Networks To Maximize Environmental And Economic Benefits, Seyed Mohsen Sadatiyan Abkenar

Wayne State University Dissertations

For more than four decades researchers tried to develop optimization method and tools to reduce electricity consumption of pump stations of water distribution systems. Based on this ongoing research trend, about a decade ago, some commercial pump operation optimization software introduced to the market. Using metaheuristic and evolutionary techniques (e.g. Genetic Algorithm) make some commercial and research tools able to optimize the electricity cost of small water distribution systems (WDS). Still reducing the environmental footprint of these systems and dealing with large and complicated water distribution system is a challenge.

In this study, we aimed to develop a multiobjective optimization …

Toward Magnetic Resonance Only Treatment Planning: Distortion Mitigation And Image-Guided Radiation Therapy Validation, Ryan Glen Price

Wayne State University Dissertations

While MR-only treatment planning has shown promise, there are still several well-known challenges that are currently limiting widespread clinical implementation.

Firstly, MR images are affected by both patient-induced and system-level geometric distortions that can significantly degrade treatment planning accuracy. . In addition, the availability of comprehensive distortion analysis software is currently limited. Also while many groups have been working toward a synthetic CT solution, further study is needed on the implementation of synCTs as the reference datasets for linac-based image-guided radiation therapy (IGRT) to help determine their robustness in an MR-only workflow.

A 36×43×2 cm3 phantom with 255 known landmarks …

Finite Element Modeling Of Frp Strengthened Concrete Beams And Columns At Different Temperatures, Bassma Ibrahim Gawil

Wayne State University Dissertations

FINITE ELEMENT MODELING OF FRP STRENGTHENED CONCRETE BEAMS

AND COLUMNS AT DIFFERENT TEMPERATURES

By

BASSMA I. GAWIL

October 2016

Advisor: Dr. Hwai-Chung Wu

Major: Civil and Environmental Engineering (Structural Engineering)

Degree: Doctor of Philosophy

Collapse of buildings or bridges is one of the worst scenarios to which built-infrastructure

may be subjected during their lifetime. In recent years, due to external environmental conditions

(temperature and humidity). Often times these effects are not immediately evident and develop

years later – making determination of responsibility difficult and repair expensive.

Fiber reinforced polymer (FRP) has proven efficient and economical for the development

and repair …

Strategic Deconfliction Of 4d Trajectory And Perturbation Analysis For Air Traffic Control And Automation System, Xinmin Tang, Yu Zhang, Ping Chen, Bo Li, Songchen Han

Civil and Environmental Engineering Faculty Publications

Strategic 4D trajectory conflict-free planning is recognized as one of the core technologies of next-generation air traffic control and automation systems. To resolve potential conflicts during strategic 4D conflict-free trajectory planning, a protection-zone conflict-control model based on air traffic control separation constraints was proposed, in which relationships between expected arrival time and adjusted arrival time at conflicting waypoints for aircraft queues were built and transformed into dynamic linear equations under the definition of max-plus algebra. A method for strategic deconfliction of 4D trajectory was then proposed using two strategies: arrival time adjustment and departure time adjustment. In addition, departure time …

A Comparative Analysis Of Energy Balance Of Thermoelectric Power Generation Vs. Fiberglass Insulation, Irl N. Lemar

Undergraduate Honors Theses

No abstract provided.

The Effects Of Commuter Rail On Population Deconcentration And Commuting: A Salt Lake City Case Study, Joanna Ganning, Mercedes Beaudoin, Simon Brewer, Keuntae Kim, Keunhyun Park

TREC Final Reports

All transportation systems have the ability to transform human settlement patterns, which can affect a range of social, economic and environmental issues. Considering investments in rail infrastructure have increased in recent decades (Bureau of Transportation Statistics, 2007; Israel & Cohen-Blankshtain, 2010), it is important for planners and researchers to understand how these rail systems influence land use, metropolitan development patterns, and population migration. The following paragraphs summarize the studies and their findings.

The Effects of Commuter Rail Establishment on the Relationships between the Built Environment, Travel Behavior, and Residential Self- Selection (RSS): To help regional and transportation planners better understand …

Novel H.265 Video Traffic Prediction Models Using Artificial Neural Networks, Collin Daly

Honors College Theses

In this work, we propose the use of non-linear, autoregressive neural network models for predicting video frame sizes. This model utilizes H.265 encoded video traces as inputs and the predicted future frame sizes as outputs. This model is developed to predict ultra-high definition video frame encoded with H.265 within IP networks. The video I, P, and B frames are predicted separately to improve model prediction accuracy. This approach is verified in MATLAB using various H.265 video traces. The results indicate that the proposed models were able to predict the video traffic fairly accurately.

Machine Learning Through Mimicry And Association, Nickolas S. Holcomb

Honors College Theses

Adaptability is a key missing features that has impeded the growth of assistive robotics. In the traditional model, all actions must be explicitly coded by a skilled programmer familiar with the hardware. This project explores a method of teaching a webcam equipped arm type robot new primitive movement using visual demonstrations.

Small Scale-Wind Power Dispatchable Energy Source Modeling, Jordan J. Cannon, David Moore, Stephen Eason, Adel El-Shahat

Electrical & Computer Engineering: Faculty Publications

Due to the importance of Wind energy as an intermittent renewable resource in Micro-Grids applications; this paper is proposed. So this research proposal seeks to model and analyze components of a wind turbine generator (WTG) system to store energy and supply loads with the stored energy. Focus is placed on the storage of energy into a lead acid battery and using the battery with the inverter as a dispatchable energy source. The storage device and inverter acts as a steam power plant generator. The small-scale system consists of wind turbine, wind generator, loads, dc-dc converter, ac-dc inverter, controller and battery. …

Cobalt-Based Catalysts For The Conversion Of Biomass-Derived Syngas To Ethanol And Higher Oxygenates, Zi Wang

LSU Doctoral Dissertations

Higher oxygenates synthesis by catalytic conversion of synthesis gas are the potential approaches to replace fossil fuels and produce chemicals for pharmaceutical manufacture, detergents and polymer industry. Cobalt-based catalysts are the most promising catalysts to replace noble metal catalysts for producing ethanol, acetaldehyde and higher oxygenates via CO hydrogenation. The formation of higher oxygenates requires active sites that can adsorb CO non-dissociatively and insert to the alkyl intermediate. The hydrogenation of the CO-inserted intermediates yields C2 and C2+ oxygenates. The main focus of this study is to investigate the active site for non-dissociative CO adsorption, and the modification of the …

Nx 10 For Engineering Design -- Learning Edition, Ming-Chuan Leu, Amir Ghazanfari, Krishna C. R. Kolan

Mechanical and Aerospace Engineering Faculty Research & Creative Works

NX is one of the world’s most advanced and tightly integrated CAD/CAM/CAE product development solution. Spanning the entire range of product development, NX delivers immense value to enterprises of all sizes. It simplifies complex product designs, thus speeding up the process of introducing products to the market.

The NX software integrates knowledge-based principles, industrial design, geometric modeling, advanced analysis, graphic simulation, and concurrent engineering. The software has powerful hybrid modeling capabilities by integrating constraint-based feature modeling and explicit geometric modeling. In addition to modeling standard geometry parts, it allows the user to design complex free-form shapes such as airfoils and …

A Statistical Approach To Broadband Noise Suppression, Walter Eversman

Mechanical and Aerospace Engineering Faculty Research & Creative Works

A method for estimating achievable attenuation for broadband noise in an inlet duct, consistent with Dyer's suggestion that an appropriate model includes all propagating acoustic modes at equal power and random phase, is proposed. Broadband noise is represented in a frequency domain analysis by a statistical distribution of propagating duct modes. The required number of modes is estimated by Rice's approximation method and verified in FEM modeling. For each propagating circumferential mode propagating radial modes have equal acoustic power and random phase. Source acoustic power is distributed among circumferential modes according to the number of propagating radial modes in the …

Linear Burn Rates Of Monopropellants For Multi-Mode Micropropulsion, Alex J. Mundahl, Steven P. Berg, Joshua L. Rovey

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Multi-mode micro propulsion is a potential game-changing technology enabling rapidly composable small satellites with unprecedented mission flexibility. Maximum mission flexibility requires propellant that is shared between the chemical and electric propulsion systems. Previous research has identified a promising monopropellant that is both readily catalytically exothermically decomposed (chemical mode) and electro sprayable (electric mode). In this work the linear burn rate of this monopropellant is determined to aid design of the microtube catalytic chemical thruster. A pressurized fixed volume reactor is used to determine the linear burn rate. Benchmark experiments use a 13-molar mixture of hydroxylammonium nitrate and water and show …

Direct Position Control Of Dielectric Barrier Discharge Filaments, Matthew C. Paliwoda, Joshua L. Rovey, Mitchell Wainwright

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Controllable patterns of plasma filaments are being explored for reconfigurable metamaterial applications. When operated in a filamentary mode, volume dielectric barrier discharges are known to produce patterns of self-organizing plasma filaments. In this work the presence and intensity of a single filament at a fixed location is controlled by an isolated and independently electrically adjusted needle electrode. Time-averaged normalized light intensity, current, and voltage are measured while varying the voltage of the needle through a self-biasing resistance. For a 7.5 kV, 3.2 kHz DBD, the needle-controlled filament discharges similar to adjacent filaments at low potentials but stops discharging at a …

Mass Spectrometry Of Selected Ionic Liquids In Capillary Electrospray At Nanoliter Volumetric Flow Rates, Shawn W. Miller, Benjamin D. Prince, Raymond J. Bemish, Joshua L. Rovey

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Capillary-based electrospray thrusters allow user-enabled control of the volumetric flow rate of the propellant. This control, coupled with mass spectrometry techniques spanning a large mass-to-charge range, enables elucidation of the composition of the electrospray beam and through further analyses, a better understanding of the physics occurring at the liquid/vacuum interface. In this work, mass spectra of selected ionic liquids electro sprayed from a capillary emitter are measured, using time-of-flight mass spectrometry, over a wide range of volumetric flow rates. The time-of-flight mass spectrometer enables simultaneous acquisition over a mass-to-charge range of 20 amu/q to ~500,000 amu/q in a single pulse …

Comparison Of Robust And Probabilistic Lmi-Based Design Of Adaptive Flight Controllers With Uncertain Input Dynamics, Mario Luca Fravolini, Tansel Yucelen, Benjamin Gruenwald, Merve Dogan, Marcello R. Napolitano

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Adaptive control-based schemes have been implemented to date in a variety of different ap-plications. However, the ability to obtain a predictable transient closed-loop performance in adaptive systems is still a challenging problem from a verification and validation point of view. To face this problem we have recently introduced an analysis and design framework for adaptive control systems in the presence of bounded uncertainty and bounded adaptive control (the boundedness can be enforced, for instance, by a parameter projection mechanism) showing that the transitory performance of a MRAC system can be expressed, analyzed, and optimized via a convex optimization formulation based …

The Next Generation Of Wireless Cyber-Physical Simulator, Xinghan Wang, Kevin Xu

Undergraduate Research Symposium Posters

In order to make Wireless Cyber-Physical Simulator(WCPS) more accessible to people in the research community, and also to improve its accuracy of representing real industrial models, we worked on the dockerization of WCPS, and implemented the multi-rate feature for WCPS, enabling the simulator to have different network rate and plant rate when running a simulation. We created a new version of WCPS by dockerizing run-time libraries and the TOSSIM server and also embedding the multi-rate feature in the old version. This report includes the introduction and dockerization of WCPS, and shows the results of using the new generation of WCPS …

Determining Unique Agents By Evaluating Web Form Interaction, Ben Cooley

College of Graduate Studies: Theses & Dissertations

Because of the inherent risks in today’s online activities, it becomes imperative to identify a malicious user masquerading as someone else. Incorporating biometric analysis enhances the confidence of authenticating valid users over the Internet while providing additional layers of security with no hindrance to the end user. Through the analysis of traffic patterns and HTTP Header analysis, the detection and early refusal of robot agents plays a great role in reducing fraudulent login attempts.

Bridge Rating Based On In-Situ Weigh-In-Motion And Health Monitoring Data, Dana Feng

LSU Doctoral Dissertations

Parallel to the bridge design methodology changes from the Allowable Stress Design to the Load Factor Design, and then to the reliability based Load and Resistance Factor Design (LRFD), bridge load rating method has also been evolving. Applying the reliability theory to the bridge load rating is more complex than applying to the LRFD since any conservatism can have a significant effect on the assessment of bridge capacity, particularly in load posting and bridge replacement. Although the current Load and Resistant Factor Rating (LRFR) method applying the concept of reliability analyses, it uses very limited site-specific data due to practical …

Control Architecture For Multi-Robot System, John H. Posselius, Christopher A. Foster, Santosh K. Pitla, Scott A. Shearer, Joe D. Luck, Michael P. Sama, Rodrigo S. Zandonadi

Department of Agricultural and Biological Systems Engineering: Faculty Publications

A multiple robot control architecture including a plurality of robotic agricultural machines including a first and second robotic agricultural machine. Each robotic agricultural machine including at least one controller configured to implement a plurality of finite state machines within an individual robot control architecture (IRCA) and a global information module (GIM) communicatively coupled to the IRCA. The GIMs of the first and second robotic agricultural machines being configured to cooperate to cause said first robotic agricultural machine and said second agricultural machine to perform at least one agricultural task.

Objective Climatological Analysis Of Extreme Weather Events In Arizona During The North American Monsoon, Jeremy J. Mazon, Christopher L. Castro, David K. Adams, Hsin-I Chang, Carlos M. Carrillo, John J. Brost

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Almost one-half of the annual precipitation in the southwestern United States occurs during the North American monsoon (NAM). Given favorable synoptic-scale conditions, organized monsoon thunderstorms may affect relatively large geographic areas. Through an objective analysis of atmospheric reanalysis and observational data, the dominant synoptic patterns associated with NAM extreme events are determined for the period from 1993 to 2010. Thermodynamically favorable extreme-weather-event days are selected on the basis of atmospheric instability and precipitable water vapor from Tucson, Arizona, rawinsonde data. The atmospheric circulation patterns at 500 hPa associated with the extreme events are objectively characterized using principal component analysis. The …

Development Of Analytical Equations For Optimum Tilt Of Two-Axis And Single-Axis Rotating Solar Panels For Clear-Atmosphere Condition, Gaurav Subhash Gugale

Browse all Theses and Dissertations

Solar Energy is a renewable energy source which is used widely in recent times. Photovoltaic panels collect the sun’s energy and convert it to electricity. Photovoltaic panels are being widely used in both domestic applications, commercial applications, and small-scale power generation applications. Photovoltaic panels are easy to install, they generate most of their power when electrical demands peak, prices of photovoltaic panels are dropping rapidly, photovoltaic panels require low maintenance, their operating costs are minimal, and they are highly suitable for remote applications. The amount of electricity produced by photovoltaic panels depends on the amount of sunlight the panel captures. …

Modification Reactivity Analysis Of Human Replication Protein A In Biologically Important States, Ryan James Yoakum

Browse all Theses and Dissertations

Human Replication Protein A (RPA) is a heterotrimeric protein consisting of 70, 32, and 14 kDa subunits. RPA is the predominant single stranded DNA binding protein within the cell. It is involved in all forms of the DNA metabolic pathways, including but not limited to, replication, recombination, damage repair, as well as cell cycle and DNA check point signaling. RPA is phosphorylated (pRPA) during G1-S phase and is dephosphorylated during M phase. Further, RPA is hyperphosphorylated during DNA damage. Through the use of x-ray crystallography and nuclear magnetic resonance, researchers have proposed models and structures based on truncated portions of …