Engineering Commons^™

Exploring The Role Of Spatial Cognition In Problem Solving, Gavin Duffy, Sheryl Sorby, Steven Nozaki, Brian Bowe

Conference papers

While spatial aptitude is acknowledged as a key cognitive ability that accompanies success in STEM education, less is reported about the qualitative differences between weak and strong visualisers in how they approach and engage with assessments in STEM education. In this paper, we study one particular aspect of the STEM curriculum - solving convergent ‘word’ problems in mathematics - in an attempt to discern quantitative and qualitative differences between the approaches weak and strong visualisers adopt when solving these problems. The paper is a work-in-progress that started with a search for suitable convergent mathematics problems which were then presented to …

Analysis Of Glottal Source Parameters In Parkinsonian Speech, Jane Hanratty, Catherine Deegan, Mary Walsh, Barry Kirkpatrick

Conference papers

Diagnosis and monitoring of Parkinson's disease has a number of challenges as there is no definitive biomarker despite the broad range of symptoms. Research is ongoing to produce objective measures that can either diagnose Parkinson's or act as an objective decision support tool. Recent research on speech based measures have demonstrated promising results. This study aims to investigate the characteristics of the glottal source signal in Parkinsonian speech. An experiment is conducted in which a selection of glottal parameters are tested for their ability to discriminate between healthy and Parkinsonian speech. Results for each glottal parameter are presented for a …

Compositional Changes For Reduction Of Polymerisation-Induced Shrinkage In Holo, Dervil Cody, Mohesh Moothanchery, Emilia Mihaylova, Vincent Toal, Svetlana Mintova, Izabela Naydenova

Doctoral

Polymerisation-induced shrinkage is one of the main reasons why many photopolymer materials are not used for certain applications including holographic optical elements and holographic data storage. Here, two compositional changes for the reduction of shrinkage in an acrylamide-based photopolymer are reported. A holographic interferometric technique was used to study changes in the dynamics of the shrinkage processes occurring in the modified photopolymer during holographic recording in real time. Firstly, the effect of the replacement of the acrylamide monomer in the photopolymer composition with a larger monomer molecule, diacetone acrylamide, on polymerisation-induced shrinkage has been studied. A reduction in relative shrinkage …

Development Of Low-Temperature Atomic Layer Deposition Of Ultra-Thin Ruco Direct Plate Liners For Flexible Electronics Applications, Dillon Alexander Gregory

Legacy Theses & Dissertations (2009 - 2024)

Low temperature plasma-assisted atomic layer deposition-grown metal nanocomposite layers based on mixtures of ruthenium and cobalt have been investigated as potential copper adhesion/barrier layers in flexible electronics applications. The success of adapting this process to flexible electronics depends on the candidate barriers meeting several necessary properties including sufficient electrical conductivity, compatibility with Cu electroplating, and ability to prevent Cu diffusion into the substrate. Preliminary testing has shown that atomic layer deposition (ALD) can be used as a technique for depositing alloyed metallic barrier layers at the lower thermal constraints dictated by the use of polymer substrates and still produce continuous …

Texture And Microstructure Of Ipvd Copper Manganese Seed In 1 Μm & 70 Nm Wide Damascene Trenches, Robert Stuart Brown

Legacy Theses & Dissertations (2009 - 2024)

This thesis describes the grain texture and microstructure of Ionized Physical Vapor Deposition (iPVD) Copper Manganese seed in 1 µm and 70 nm wide damascene trenches. Using Transmission Electron Microscopy (TEM) imaging and diffraction pattern analysis, the grain size and general orientation of the grains were determined. It was found that the 1 µm wide trenches contained larger grains and more texture than that of the 70 nm wide trenches. While this thesis builds upon previous work by Brendan O’Brien in the Dunn group, one significantly different finding will be presented regarding the structure on the sidewall of the trenches. …

The Investigation Of Nanoscale Effects On Schottky Interfaces And The Scattering Rates Of High Resistivity Metals, Christopher Anthony Durcan

Legacy Theses & Dissertations (2009 - 2024)

Understanding the transport of electrons through materials and across interfaces is fundamental to modern day electronics. As electrons travel, interactions with defects within the crystal lattice induce scattering which gives rise to resistivity. At the interface between two materials, electrostatic barriers exist which can impede the flow of electrons. The work of this thesis is to further the understanding of electron transport by measuring the transport across metal-semiconductor interfaces at the nanoscale and measure scattering phenomena in metals. The measurement technique ballistic electron emission microscopy (BEEM) was used due to its ability to probe the scattering processes within a metal …

Experimental And Theoretical Investigations Of Cadmium Diffusion In Vacancy-Rich Cu(In, Ga)Se₂ Material, Norb Biderman

Legacy Theses & Dissertations (2009 - 2024)

Copper indium gallium selenide (Cu(In,Ga)Se2 or CIGS) has become a significant topic of research and development for photovoltaic application. CIGS photovoltaic devices have demonstrated record conversion efficiencies however are still below the maximum solar conversion efficiency. Losses in performance have been attributed structural defects including vacancies, doping, grain boundaries, and compositional non-uniformity that are poorly understood and controlled.

Investigating The Size Dependent Material Properties Of Nanoceria, Bushra B. Alam

Legacy Theses & Dissertations (2009 - 2024)

Nanoceria is widely being investigated for applications as support materials for fuel cell catalysts, free radical scavengers, and as chemical and mechanical abrasives due to its high antioxidant capacity and its oxygen buffering capacity. This antioxidant or oxygen buffering capacity has been reported to be highly size dependent and related to its redox properties. However, the quantification of this antioxidant capacity has not been well defined or understood and has been often been carried out using colorimetric assays which do not directly correlate to ceria nanoparticle properties. Fabrication rules for developing materials with optimal antioxidant/oxygen buffering capacities are not yet …

Investigation Of Contact Properties At Metal Graphene Junctions, Their Degradation And Intrinsic Limitations, Zhenjun Zhang

Legacy Theses & Dissertations (2009 - 2024)

Graphene is a two-dimensional material, comprised of a monolayer of carbon in a hexagonal lattice. Since 2004, the most promising applications of this material are high frequency devices (such as mixers and power amplifiers), as well as flexible and transparent electronics. However, these applications can’t be realized without a proper contact metal. With more understanding of the contact properties, the range of prospects for graphene’s applications can be better defined.

Development Of Enhanced Window Layers For Cigs Photovoltaic Devices, James Nicholas Alexander

Legacy Theses & Dissertations (2009 - 2024)

Photovoltaic devices are among the promising options for sustainable future energy generation. Thin film solar cells have demonstrated the ability to be a low-cost solution to clean renewable energy and are cost competitive with current silicon based photovoltaic devices. One of the most promising thin film devices right now is the Copper Indium Gallium Selenide (CIGS) solar cell with maximum reported power conversion efficiency of 22.3%. The Transparent Conducting Oxide (TCO) which is the top layer of the CIGS device also known as the window layer, is responsible for collecting the electrons generated in the CIGS device and conducting them …

Degradation And Exciton Energy Transfer Studies In Single-Walled Carbon Nanotube Bundles, Abhishek Gottipati

Legacy Theses & Dissertations (2009 - 2024)

Single walled carbon nanotubes (SWNTs) due to their unique optical behavior, large surface area, robust mechanical strength and electrical properties make them one of the ideal candidates for sensing and opto-electronic applications. In this work, we explore the energy transfer (exciton energy transfer-EET) phenomena occurring between nanotubes in bundles, using resonance Raman spectroscopy.

Novel Two-Dimensional Devices For Future Applications, Pratik Agnihotri

Legacy Theses & Dissertations (2009 - 2024)

The scalability of field effect transistor has led to the monumental success of complementary metal-oxide-semiconductor (CMOS) technology. In the past, device scaling was not the major issue to a greater extent. Recently with current technology nodes, transistor characteristics show signs of reduced performance due to short channel effects and other issues related to device scaling. Device designers look for innovative ways to enhance the transistor performance while keeping up with device miniaturization. Successful inventions include the development of tri-gate technology, gate all around (GAA) field effect transistors, silicon-on-insulator substrate, and high-k dielectrics. These developments have enabled the device scaling that …

Investigation Of The Optical And Sensing Characteristics Of Nanoparticle Arrays For High Temperature Applications, Gnanaprakash Dharmalingam

Legacy Theses & Dissertations (2009 - 2024)

The monitoring of polluting gases such as CO and NOx emitted from gas turbines in power plants and aircraft is important in order to both reduce the effects of such gases on the environment as well as to optimize the performance of the respective power system. The need for emissions monitoring systems is further realized from increased regulatory requirements that are being instituted as a result of the environmental impact from increased air travel. Specifically, it is estimated that the contributions from aircraft emissions to total NOx emissions will increase from 4% to 17% between 2008 and 2020. Extensive fuel …

Restriction And Characterization Of Human Breast Cancer Using A Three-Dimensional Embryonic Stem Cell Model, Bridget Mooney

Legacy Theses & Dissertations (2009 - 2024)

Human breast cancer is currently the highest diagnosed form of cancer and the second leading cause of cancer-related deaths in American women. Triple negative breast cancer is of the basal subtype and displays the worst prognosis owing to its highly metastatic properties. Current treatments focused on eradicating breast tumors in lieu of or following local therapy include chemotherapy, hormonal therapy, and targeted therapy. Hormonal therapy is not an option for triple negative breast cancer as it does not contain hormone receptors and there are currently no approved biological targeted therapies. Chemotherapy has proven unsuccessful because triple negative breast cancer is …

Development Of Integrated Tio₂ On Carburized Si Nanowires As A Catalyst/Support Structure For Alkaline Fuel Cells, Adam Lemke

Legacy Theses & Dissertations (2009 - 2024)

Due to a combination of environmental and economic motivations, there is a strong impetus to transition away from fossil fuels towards renewable sources of energy. Critical to achieving this goal will be technologies that allow for the storage and transmission of energy derived from renewable sources. Hydrogen fuel cells may play a significant role in making this a reality, allowing for the use of hydrogen as a non-carbon based fuel, in particular for vehicle applications. Hydrogen fuel cells directly convert chemical energy into electrical energy, with only water vapor and heat as waste products.

Tailoring The Optical Properties Of Silicon With Ion Beam Created Nanostructures For Advanced Photonics Applications, Perveen Akhter

Legacy Theses & Dissertations (2009 - 2024)

In today’s fast life, energy consumption has increased more than ever and with that the demand for a renewable and cleaner energy source as a substitute for the fossil fuels has also increased. Solar radiations are the ultimate source of energy but harvesting this energy in a cost effective way is a challenging task. Si is the dominating material for microelectronics and photovoltaics. But owing to its indirect band gap, Si is an inefficient light absorber, thus requiring a thickness of solar cells beyond tens of microns which increases the cost of solar energy. Therefore, techniques to increase light absorption …

Strong Metal Support Interaction Of Pt On Tio₂ Grown By Atomic Layer Deposition And Physical Vapor Deposition For Fuel Cell Applications, Robin Paul Hansen

Legacy Theses & Dissertations (2009 - 2024)

Several roadblocks prevent the large-scale commercialization of hydrogen fuel cells, including the stability of the Pt catalysts and their substrates, as well as the high cost of Pt. This is particularly true for the cathode, which requires a higher Pt loading because of the slow kinetics of the oxygen reduction reaction (ORR). The problem with the stability of the substrate can be solved by replacing the traditional carbon support with a conductive metal oxide such as reduced TiO2, which will not easily corrode and should result in longer lasting fuel cells. In this study, Pt was deposited either by atomic …

Magnetoresistance Of A Low-K Dielectric, Brian Thomas Mcgowan

Legacy Theses & Dissertations (2009 - 2024)

Low-k dielectrics have been incorporated into advanced computer chip technologies as a part of the continuous effort to improve computer chip performance. One drawback associated with the implementation of low-k dielectrics is the large leakage current which conducts through the material, relative to silica. Another drawback is that the breakdown voltage of low-k dielectrics is low, relative to silica [1]. This low breakdown voltage makes accurate reliability assessment of the failure mode time dependent dielectric breakdown (TDDB) in low-k dielectrics critical for the successful implementation of these materials. The accuracy with which one can assess this reliability is currently a …

Investigation Of Enzymatically Synthesized Glycogen As A Novel Nanodendrimer For Therapeutic Delivery, Sarah Ann Engelberth

Legacy Theses & Dissertations (2009 - 2024)

The field of medicinal chemistry is ever expanding, designing and discovering new therapeutic strategies. Oftentimes, it is challenging for these therapeutics to undergo clinical translation due to ineffective administration or unwanted toxicity in vivo. As such, drug delivery vehicles are designed to overcome these hurdles, allowing for delivery to the site of action by improving biodistribution, protecting therapeutic cargo, and decreasing toxicity. The work presented here aims to investigate a naturally-derived carbohydrate nanodendrimer, enzymatically synthesized glycogen (ESG) for drug delivery. This nontoxic, highly-branched, glucose-based structure has interior void volumes to allow for cargo encapsulation as well as a large density …

Optical Metrology For Cigs Solar Cell Manufacturing And Its Cost Implications, Sravan Kumar Sunkoju

Legacy Theses & Dissertations (2009 - 2024)

Solar energy is a promising source of renewable energy which can meet the demand for clean energy in near future with advances in research in the field of photovoltaics and cost reduction by commercialization. Availability of a non-contact, in-line, real time robust process control strategies can greatly aid in reducing the gap between cell and module efficiencies, thereby leading to cost-effective large-scale manufacturing of high efficiency CIGS solar cells. In order to achieve proper process monitoring and control for the deposition of the functional layers of CuIn1-xGaxSe2 (CIGS) based thin film solar cell, optical techniques such as spectroscopic reflectometry and …

Nanotechnology & Human Stem Cells : Applications In Cardiogenesis And Neurogenesis, Martin Lyubomirov Tomov

Legacy Theses & Dissertations (2009 - 2024)

Human stem cell research holds an unprecedented promise to revolutionize the way we approach medicine and healthcare in general, moving us from a position of mostly addressing the symptoms to a state where treatments can focus on removing the underlying causes of a condition. Stem cell research can shed light into normal developmental pathways, as we are beginning to replicate them in a petri dish and can also be used to model diseases and abnormal conditions. Direct applications can range from finding cures for single or multigene diseases to demonstrating that we can replace these genes with a normal copy. …

Synchronous Subgraphs In Networks, Navita Jain

Legacy Theses & Dissertations (2009 - 2024)

Community detection is a central problem in network analysis. The majority of existing work defines communities as subsets of nodes that are structurally well-connected and isolated from the rest of the network. Apart from their underlying connectivity, nodes in real-world networks exhibit temporal activity: user posts in social networks, browsing activity on web pages and neuron activations in brain networks to name a few. While edges encode potential for community interactions, participation in the community can be quantified by synchronized member activity. Given both the network structure and individual node activity, how can we detect communities that are both well-connected …

Development Of Iii-Sb Based Technologies For P-Channel Mosfet In Cmos Applications, Shailesh Kumar Madisetti

Legacy Theses & Dissertations (2009 - 2024)

The continuous scaling of silicon CMOS predicts the end of roadmap due to the difficulties such as that arise from electrostatic integrity, design complexities, and power dissipation. These fundamental and practical limitations bring the need for innovative design architectures or alternate materials with higher carrier transport than current Si based materials. New device designs such as multigate/gate-all-around architectures improve electrostatics while alternate materials like III-Vs such as III-As for electrons and III-Sbs for holes increase operational speed, lower power dissipation and thereby improve performance of the transistors due to their low effective mass and faster transport properties. Further, application of …

The Gammaturc Nanomachine Mechanism And Future Applications, Timothy Riehlman

Legacy Theses & Dissertations (2009 - 2024)

The complexity and precision of the eukaryotic cell’s cytoskeletal network is unrivaled by any man-made systems, perfected by billions of years of evolution, mastering elegant processes of self-assembly, error correction, and self-repair. Understanding the capabilities of these networks will have important and far reaching applications in human medicine by aiding our understanding of developmental processes, cellular division, and disease mechanisms, and through biomimicry will provide insights for biosynthetic manufacturing at the nanoscale and across scales. My research utilizes cross species techniques from Human to the model organism of Fission Yeast to investigate the structure and mechanisms of the g-tubulin ring …

The Effects Of Rarefaction And Thermal Non-Equilibrium On A Blunt Body And A Bicone In Hypersonic Flow And Their Shape Optimization For Reducing Both Drag And Heat Transfer, Samuel Gardner

McKelvey School of Engineering Graduate Student Theses & Dissertations

Design of space vehicles pose many challenging problems due to their hypersonic speeds since they need to travel through different flow regimes due to changes in the density of the atmosphere with altitude. Some of the key characteristics associated with hypersonic flow are extremely high temperatures and heat transfer to the wall of the spacecraft. At these temperatures, the assumption of thermal equilibrium is no longer valid and the effect of rotational non-equilibrium must be included in the modeling of diatomic gas flow. This thesis employs the Navier-Stokes equations, which are modified to include a rotational non-equilibrium relaxation model to …

Object Detection For Agricultural And Construction Environments Using An Ultrasonic Sensor, Joseph S. Dvorak, Marvin L. Stone, Kelvin P. Self

Biosystems and Agricultural Engineering Faculty Publications

This study tested an ultrasonic sensor‘s ability to detect several objects commonly encountered in outdoor agricultural or construction environments: a water jug, a sheet of oriented strand board (OSB), a metal fence post, a human model, a wooden fence post, a Dracaena plant, a juniper plant, and a dog model. Tests were performed with each target object at distances from 0.01 to 3 m. Five tests were performed with each object at each location, and the sensor‘s ability to detect the object during each test was categorized as "undetected," "intermittent," "incorrect distance," "good." Rigid objects that presented a larger surface …

Shear Driven Suppressed Nucleation Annular Flow-Boiling In Millimeter-Scale Channels: Direct Numerical Simulations, Sharayu Bhasme

Dissertations, Master's Theses and Master's Reports

Many contemporary high heat-flux cooling applications are facilitated by mm-scale flow-boilers that operate in the steady annular suppressed nucleation regime (i.e., a thin evaporating liquid film flow covers the heated boiling-surface).

For such cases, this thesis presents a direct numerical simulation (DNS) approach. The steady algorithm and its accuracy are discussed. Representative detailed solutions for annular flow-boiling of FC-72 in a horizontal channel are presented.

Reactivity Of Hydroxyl Radical: Mechanistic Insight Into The Reactivity With Dissolved Organic Matter, Mallika Khare

Dissertations, Master's Theses and Master's Reports

Advanced Oxidation Processes (AOPs) that produce highly reactive hydroxyl radicals (HO•) are attractive and promising water and wastewater treatment technologies because HO• can destroy a variety of organic compounds. However, background dissolved organic matter (DOM) significantly reduces the performance of AOPs by scavenging HO•. The conventional experimental approach to identifying ‘average’ reactivity limits our mechanistic understanding of the reaction of HO• with complex mixture of surrogate DOM. This is the first study to use quantum mechanical methods to understand the elementary reactions of HO• with a model monomer of DOM. “Temple Northeastern Birmingham model” (TNB). The theoretically calculated aqueous-phase free …

Mechanical Testing Of Fused Filament 3-D Printed Components For Distributed Manufacturing, Nagendra Gautam Tanikella

Dissertations, Master's Theses and Master's Reports

Fused filament fabrication (FFF)-based open-source 3-D printers offer the potential of decentralized manufacturing both in developing and developed countries. Unfortunately, a severe lack of data and standards relating to material properties and printed components limit this potential. This thesis first investigates the mechanical properties of a wide-range of FFF materials and provides a database of mechanical strength of the materials tested. The results demonstrate that the tensile strength of a 3-D printed specimen depends largely on the mass of the specimen, which provides a means to estimate the strength of 3-D printed components. Then this information is used to evaluate …

Nebraska Summary: S1078 New Holland T7.260, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …