Engineering Commons^™

Measurement Of Activity And Stability Of Physical Vapor Deposition (Pvd) Coated Crystal Surfaces, Anuradha Krishnan

Masters Theses

The overall objective of this research work is to investigate the hydrophilic and hydrophobic forces acting on organic crystal planes and understanding the interaction of functional groups with additive molecular nanolayers. Crystals of acetaminophen and lactose were made and the surface forces were tested on Atomic Force Microscope (AFM). Uniformity of crystal surface was confirmed from the AFM study in the first stage. The growth factors of crystal planes as a function of time were studied. Adhesion forces on plain crystals were measured on both two different organic crystals made of acetaminophen and lactose. In the second stage, …

A General Code To Represent The Mathematical Life Cycle Cost Model Of Bridge, Bajel Mohammed Alshadeedi

Masters Theses

There are many factors that play a role in the overall cost of any bridge. The life cycle cost needs deep knowledge of bridge components to calculate its subcategories costs. The bridge life cycle cost is divided into; agency, user cost, and society costs. The agency cost includes the expected value of the final bridge construction cost, the inspection cost, better value of repainting cost, and replacing asphaltic deck cost. The user cost includes traffic delay cost and vehicle operation cost under different traffic conditions, accident cost, and failure cost. The society cost includes aesthetical and environmental impact. All costs …

Analysis Of Transit Accessibility For People With Disabilities, Rostam Khalid Mohammed Ameen Qatra

Masters Theses

The inconvenience of public transit systems and unavailability of bus stops in the United States has resulted in a heavy reliance on the private automobile. One of the main issues in transit services is accessibility, particularly for people with disabilities. This research is intended to compare estimated job accessibility measures by transit in Kalamazoo county for workers with reduced physical mobility and without. Using OpenTripPlanner (OTP) software, General Transit Feed Specification (GTFS), Open Street Map (OSM) and Longitudinal Employer-Housing Dynamics (LODES) data were analyzed to estimate job accessibility for people with mobility constraints. By using the shortest tree path method, …

Optimization Methodology For Cvt Ratio Scheduling With Consideration Of Both Engine And Cvt Efficiency, Steven Beuerle

Masters Theses

A transmission ratio schedule is developed to optimize the fuel consumption for an automotive continuously variable transmission (CVT) connected to an internal combustion engine (ICE). Although the optimal operating line (OOL) generated from an engine brake specific fuel consumption (BSFC) map can be used to generate a CVT ratio schedule that yields maximum engine efficiency, it was found that OOL-based CVT ratio scheduling does not necessarily offer the best fuel economy because optimal CVT efficiency does not always correspond to OOL tracking. To develop a CVT ratio schedule that can offer the best fuel economy, a novel ratio-scheduling methodology is …

A New System For Human Microrna Functional Evaluation And Network, Jiachun Han

School of Computing: Dissertations, Theses, and Student Research

MicroRNAs are functionally important endogenous non-coding RNAs that silence host genes in animal and plant via destabilizing the mRNAs or preventing the translation. Given the far-reaching implication of microRNA regulation in human health, novel bioinformatics tools are desired to facilitate the mechanistic understanding of microRNA mediated gene regulation, their roles in biological processes, and the functional relevance among microRNAs. However, most state-of-the-art computational methods still focus on the functional study of microRNA targets and there is no e ective strategy to infer the functional similarity among microRNAs. In this study, we developed a new method to quantitatively measure the functional …

On Path Consistency For Binary Constraint Satisfaction Problems, Christopher G. Reeson

School of Computing: Dissertations, Theses, and Student Research

Constraint satisfaction problems (CSPs) provide a flexible and powerful framework for modeling and solving many decision problems of practical importance. Consistency properties and the algorithms for enforcing them on a problem instance are at the heart of Constraint Processing and best distinguish this area from other areas concerned with the same combinatorial problems. In this thesis, we study path consistency (PC) and investigate several algorithms for enforcing it on binary finite CSPs. We also study algorithms for enforcing consistency properties that are related to PC but are stronger or weaker than PC.

We identify and correct errors in the literature …

Power Management In Heterogeneous Mapreduce Cluster, Rojee Sunuwar

School of Computing: Dissertations, Theses, and Student Research

The growing expenses of power in data centers as compared to the operation costs has been a concern for the past several decades. It has been predicted that without an intervention, the energy cost will soon outgrow the infrastructure and operation cost. Therefore, it is of great importance to make data center clusters more energy efficient which is critical for avoiding system overheating and failures. In addition, energy inefficiency causes not only the loss of capital but also environmental pollution. Various Power Management(PM) strategies have been developed over the years to make system more energy efficient and to counteract the …

Rectilinear Steiner Tree Construction, Zhiliu Zhang

School of Computing: Dissertations, Theses, and Student Research

The Minimum Rectilinear Steiner Tree (MRST) problem is to find the minimal spanning tree of a set of points (also called terminals) in the plane that interconnects all the terminals and some extra points (called Steiner points) introduced by intermediate junctions, and in which edge lengths are measured in the L1 (Manhattan) metric. This is one of the oldest optimization problems in mathematics that has been extensively studied and has been proven to be NP-complete, thus efficient approximation heuristics are more applicable than exact algorithms.

In this thesis, we present a new heuristic to construct rectilinear Steiner trees (RSTs) with …

Determination Of Plant Architecture And Component Phenotyping Based On Time-Lapse Image Analysis, Srinidhi Bashyam

School of Computing: Dissertations, Theses, and Student Research

Plant breeding and the development of new food production depend on accurate measurement of different phenotypes (observable physical traits) of a plant. The plant phenotypes play a very important role in the agronomic production. The successful computation of plant phenotypes largely depends on the determination of the architecture of the plant, i.e., the arrangement of its parts (leaves, stems, flowers, etc.) relative to each other, and how the size, shape, and positions of those parts change over time. Researchers and breeders extract valuable information from these types of data to make an informed decision on which individuals to advance to …

Towards Building A Review Recommendation System That Trains Novices By Leveraging The Actions Of Experts, Shilpa Khanal

School of Computing: Dissertations, Theses, and Student Research

Online reviews increase consumer visits, increase the time spent on the website, and create a sense of community among the frequent shoppers. Because of the importance of online reviews, online retailers such as Amazon.com and eOpinions provide detailed guidelines for writing reviews. However, though these guidelines provide instructions on how to write reviews, reviewers are not provided instructions for writing product-specific reviews. As a result, poorly-written reviews are abound and a customer may need to scroll through a large number of reviews, which could be up to 6000 pixels down from the top of the page, in order to find …

Evolution And Rationale For United States Department Of Defense Electromagnetic Pulse Protection Standard, George H. Baker Iii

School of Integrated Sciences - Faculty Scholarship

The United States (US) Department of Defense (DoD) Electromagnetic Pulse (EMP) protection standard offers a solid basis for protecting commercial communication, data, and control facilities. Because of the standard’s shielded barrier and test requirements, it is not surprising that there is a strong temptation within industry and government to dismiss the MIL-STD 188-125 approach in favor of less rigorous protection methods. It is important to understand that US DoD EMP protection standard for fixed facilities, MIL-STD-188-125, reflects an evolution by trial and error that spanned a period of decades beginning with the acquisition of the Minuteman Missile System in the …

Evaluation Of Smart Water Flooding In A Selected Uae Carbonate Oil Reservoir, Mohammad Jasem Khalifi

Chemical and Petroleum Engineering Theses

Water flooding is by far the most common method of improved oil recovery applied in oil reservoirs. Water is the cheapest source of external energy that has been used over decades in water flooding schemes, provided that the damage does not adversely affect its injectivity. Displacement efficiency of water flooding can be significantly affected by crude oil/water/rock interactions. Historically, some consideration was given to such interactions in the practice of reservoir engineering. In recent years, extensive research in this area has documented that higher oil recoveries can be obtained when low-salinity water is injected in a formation with high salinity …

Fiber Glass Mat Splice Automation, Max Weinstein, Charles Scott Forbes, Max Kilpatrick

Mechanical Engineering

Currently, GAF has two operators manually splice together each roll of fiberglass mat. To save money and resources, GAF wants to automate this splicing process. Our team is responsible for stage 3 of 5 in this automation process. We are responsible for ensuring that the system is able to move autonomously to the necessary positions required for splicing together the rolls of fiberglass mat. We have determined the best solution for accomplishing this movement is to use linear slide actuators. This document will describe the process by which we arrived at our solution, the details of our solution, and a …

Compression Molded Composite Component, Greg Hermansen, Larsson Johnson, Joanne Medrano, Kyle Hammell

Mechanical Engineering

The following final design report outlines the design and fabrication of a carbon fiber compression molded sunglasses case. It intends to guide the development of a future lab activity for a composites undergraduate course at Cal Poly – San Luis Obispo. The activity aims to support an educational investigation in "out-of-autoclave" composites manufacturing methods, such as compression molding, which offer some key benefits over autoclave molding. The methodology behind the creation of a conceptual design, an initial prototype, and a final product is laid out in detail below.

Cal Poly Microgrid - Solar Panel Mounts, Dylan Mayer, Christian Odegard, Gregory Pellegrino, Connor Mckay

Mechanical Engineering

No abstract provided.

Single Carrier Frequency Domain Equalization And Energy Efficiency Optimization For Mimo Cognitive Radio., Xiaohui Zhang

Electronic Theses and Dissertations

This dissertation studies two separate topics in wireless communication systems. One topic focuses on the Single Carrier Frequency Domain Equalization (SC-FDE), which is a promising technique to mitigate the multipath effect in the broadband wireless communication. Another topic targets on the energy efficiency optimization in a multiple input multiple output (MIMO) cognitive radio network. For SC-FDE, the conventional linear receivers suffer from the noise amplification in deep fading channel. To overcome this, a fractional spaced frequency domain (FSFD) receiver based on frequency domain oversampling (FDO) is proposed for SC-FDE to improve the performance of the linear receiver under deep fading …

Uas Surveillance Criticality, Kyle Snyder, William Semke, Jim Gregory, Michael Wing, Mohammad Moallemi, J. W. Bruce

Aviation Faculty Publications

The integration of unmanned aircraft systems (UAS) into the national airspace system (NAS) poses considerable challenges. Maintaining human safety is perhaps chief among these challenges as UAS remote pilots will need to interact with other UAS, piloted aircraft, and other conditions associated with flight. A research team of 6 leading UAS research universities was formed to respond to a set of surveillance criticality research questions. Five analysis tools were selected following a literature review to evaluate airborne surveillance technology performance. The analysis tools included: Fault Trees, Monte Carlo Simulations, Hazard Analysis, Design of Experiments (DOE), and Human-in-the-Loop Simulations. The Surveillance …

Interactive Physics And Characteristics Of Photons And Photoelectrons In Hyperbranched Zinc Oxide Nanostructures, Garrett Edward Torix

Graduate Theses and Dissertations

As is commonly known, the world is full of technological wonders, where a multitude of electronic devices and instruments continuously help push the boundaries of scientific knowledge and discovery. These new devices and instruments of science must be utilized at peak efficiency in order to benefit humanity with the most advanced scientific knowledge. In order to attain this level of efficiency, the materials which make up these electronics, or possibly more important, the fundamental characteristics of these materials, must be fully understood. The following research attempted to uncover the properties and characteristics of a selected family of materials. Herein, zinc …

Triclosan: An Instructive Tale, Patrick J. Mcnamara, Stuart B. Levy

Civil and Environmental Engineering Faculty Research and Publications

The Food and Drug Administration (FDA) recently released a final rule to ban triclosan and 18 other antimicrobial chemicals from soaps. We applaud this rule specifically because of the associated risks that triclosan poses to the spread of antibiotic resistance throughout the environment. This persistent chemical constantly stresses bacteria to adapt, and behavior that promotes antibiotic resistance needs to be stopped immediately when the benefits are null.

Contact Phenomenon Of Free-Rolling Wide-Base Tires: Effect Of Speed And Temperature, Jaime Hernandez, Imad L. Al-Qadi

Civil and Environmental Engineering Faculty Research and Publications

The finite-element method was used to quantify the effect of temperature and speed on contact area, deflection, and three-dimensional contact stresses of a free-rolling wide-base tire. The tire model comprised material properties identified in the laboratory and/or provided by the tire manufacturer (hyperviscoelastic rubber and linear elastic reinforcement) and accurate geometry. The model was validated using measured deflection and contact area. The analysis matrix consisted of 81 cases resulting from a combination of three loads, tire-inflation pressures, speeds, and temperatures. Four criteria were used to compare contact stresses: range, average, root-mean-square error, and coefficient of determination. Speed and temperature influence …

Mix Design And Mechanical Characterization Of Stabilized Compressed Earth Blocks And Assemblies For The Jemez Pueblo In New Mexico, Nicole B. Trujillo

Civil Engineering ETDs

Earthen structures have a long architectural and cultural heritage in New Mexico. Similar structures are evident around the world. With the current depletion of natural resources and high cost of materials, compressed earth block construction offers a sustainable building material alternative. Stabilized compressed earth blocks (SCEB) are compressed earth blocks with additives such as, hydrated lime or Portland cement to protect the earth block from absorbing water. SCEBs are being produced using native soils for residential construction on the Jemez Pueblo in New Mexico.

The primary goal of this research is to enable production of SCEBs with native soils from …

Deployment And Evaluation Of An Active Rfid Tracking System For Precision Animal Management, Brian Barnes

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

A better understanding of animal space utilization in current livestock facilities could lead to improved facility design and animal health. This study was conducted to determine whether an active RFID tag tracking system could accurately provide animal locomotion data on an individual animal basis. The system is composed of four sensors, located in the corners of a swine pen, and compact tags, which attach to the animals and transmit a signal. The sensors use the tag signals to determine 3-D positions in real-time. A data acquisition system was developed to capture raw data from the system software into a database …

A Generic Benchmark For A Mini-Split Heat Pump System, Yuchen Wang

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

Heating, Ventilation, and Air Conditioning (HVAC) accounts for half of the building energy consumption in the U.S where Mini-Split Heat Pumps (MSHPs) are an emerging type of HVAC system. Their utilization has greatly increased by 34% from 2009 to 2013 and high potential EER is recognized for MSHPs. However, there is limited research involving MSHPs systems, and there is no generic benchmark for system testing and modeling. The available simulation tools such as VapCyc, GreatLab, and CYCLE_D are either too complicated, difficult to access, or not freely available. Therefore, an accurate and public share generic benchmark is essential and will …

Characterization Of Ground Nozzles For Pesticide Applications, Ryan Henry

Department of Agronomy and Horticulture: Dissertations, Theses, and Student Research

Pesticide applications are a common component of crop production systems in the United States (US). For row crop systems (e.g. corn, soybean, or wheat), pesticides are applied by ground, aerial, or chemigation methods. The exact method of pesticide delivery is not universally regulated/ prescribed in the US, and the equipment and application technique are largely defined by the individual applicator. A wide variety of choices and decisions must be made by applicators to result in a successful pesticide application. Examples of these choices include proper active ingredient(s), carrier volume and equipment (e.g. nozzle type, spacing, and operating pressure) selection while …

The Design Of An Articulating Five-Headed In-Water Grooming Tool To Maintain Ships Free Of Fouling, Caglar Erdogan

Theses and Dissertations

Biofouling is a major concern to ship owners. Biofouling increases hull roughness, increasing the frictional resistance and fuel consumption while decreasing maximum speed. Finding a way to maintain hulls free from fouling has, therefore, become a research challenge for scientists and engineers. Grooming has been proposed as a novel method for controlling fouling (Tribou and Swain 2010). It refers to the regular proactive light cleaning to maintain the hull free of fouling with minimal impact to ship coatings. The purpose of this thesis is to design, build, and deploy a compliant multiheaded grooming tool which utilized five polypropylene vertically rotating …

Modeling And Analysis Of A Novel Imbedded Organic Thermal Cycle, Joel Maker Faure

Theses and Dissertations

A thermal cycle is a device that converts thermal energy into work energy. There is a strong need in the United States and the world for a cycle that can have viable performances with low-grade temperature heat sources to increase the supply of power generation. There are many cycles with different configurations, however most do not involve mixing. Generally speaking this is due to modeling difficulties with multiple constituents, phases, and the technology available that lose performance under these mixed conditions. The gap in technology for mixed flow and phase components is getting smaller due to the need. Current cycles …

Design And Development Of A Physiological Stress Monitoring/Alert System Using A Wristband, Ritesh Varma Pathapati Thyagaraju

Theses and Dissertations

The design and development of wearable physiological systems for stress monitoring have gathered a lot of attention during the past few years. These systems have undergone much-needed development to tackle long-term effects such as a headache, depression, insomnia, high blood pressure, confusion, inability to make correct choices, etc. Accurately measuring physiological signals that are helpful to detect stress in its early stages using wearable technology have long been a goal in the healthcare industry. Current commercial products such as Fitbit and Empatica only monitor either the heart rate (Fitbit) or electrodermal activity in real time (Empatica) but these devices have …

Feasibility Of Friction Stir Processing (Fsp) As A Method Of Healing Cracks In Irradiated 304l Stainless Steels, Cameron Cornelius Gunter

Theses and Dissertations

The current US fleet of nuclear reactors has been in service for three decades. Over this period, existing welds in stainless steel (SS) shrouds have sustained stress corrosion cracking (SCC) and are in need of repair. Additionally, helium has formed interstitially as a byproduct of proton bombardment. Current repair technology, such as TIG welding, puts extreme amounts of heat into the material and allows for interstitial helium atoms to aggregate and form bubbles/voids at grain boundaries. This significantly weakens the material, proving to be a very counterproductive and ineffective repair technique. Much study has been done on friction stir processing …

Development Of A Performance-Based Procedure For Assessment Of Liquefaction-Induced Free-Field Settlements, Brian David Peterson

Theses and Dissertations

Liquefaction-induced settlement can cause significant damage to structures and infrastructure in the wake of a seismic event. Predicting settlement is an essential component of a comprehensive seismic design. The inherent uncertainty associated with seismic events makes the accurate prediction of settlement difficult. While several methods of assessing seismic hazards exist, perhaps the most promising is performance-based earthquake engineering, a framework presented by the Pacific Earthquake Engineering Research (PEER) Center. The PEER framework incorporates probability theory to generate a comprehensive seismic hazard analysis. Two settlement estimation methods are incorporated into the PEER framework to create a fully probabilistic settlement estimation procedure. …

Submerged Jump Remediation At Low-Head Dams: The Multiple Staggered Deflector Design, Ronald Francis Mcghin

Theses and Dissertations

Low-head dams are capable of creating dangerous counter-currents just downstream from the structure. These dangerous counter-currents are known as submerged hydraulic jumps and are responsible for hundreds of fatalities at numerous low-head dams across the United States. The counter-current creates high upstream-directed surface velocities across the width of the channel, making it nearly impossible for an individual to escape. This submerged jump can occur during a range of upstream and downstream conditions. Effective, safe and low-cost remediation options must be explored in order to prevent further fatalities at these structures. This document explores such a remediation option: the Multiple Staggered …