Engineering Commons^™

Designing The Identities Of Engineers, Mike Murphy, Shannon Chance, Eddie Conlon

Books/Book chapters

Book Chapter forthcoming in Engineering Education and Practice in Context, Vol. 2 to be published by Springer in 2015.

First Steps In Developing Cement-Based Batteries To Power Cathodic Protection Of Embedded Steel In Concrete, Niall Holmes, Aimee Byrne, Brian Norton

Articles

This paper presents the first steps in developing innovative cement-based batteries to power cathodic protection in reinforced concrete structures. Initial electrical outputs of 1.55V and 23mA have been found to be sufficient to polarise prescribed corrosion currents of 20mA per m2 of embedded steel. Cathodic protection is a well-developed and powerful technique to limit the effects of steel reinforcement corrosion. However, as it requires an electrical supply day and night, it is often powered by non-environmentally friendly diesel generators or connected to the electrical grid. This paper focuses on increasing the ionic conductivity of the solution in the cement pores, …

Energy Savings Across Eu Domestic Building Stock By Optimizing Hydraulic Distribution In Domestic Space Heating Systems, Ciara Ahern, Brian Norton

Articles

The objective of this work is to quantify the resultant savings across the EU from the optimization of existing system components in domestic space heating distribution systems to maintain comfort levels. Heat energy savings are shown to range from 1% to 19% depending on dwelling type, age, location and initial specific heat energy consumption.

Introducing Pbl Into Civil And Structural Engineering, Niall Holmes, Una Beagon

Teaching Fellowships

The benefits of problem based learning for students are a deeper understanding of lecture material, and the development of problem solving and collaboration skills which will greatly enhance their educational experience. This approach has been successful in other programmes as it departs from the traditional ‘what I am told I need to know’ to ‘what I need to know to solve the problem’ promoting self-directed learning. Lecturers in turn transition from the giver of information to the facilitator of learning through support, guidance and monitoring. This project introduced an active learning element into two concrete technology modules by replacing traditional …

A Critical Realist Approach To Engineering Ethics, Eddie Conlon

Conference papers

This paper is focused on the teaching of engineering ethics (EE). Through a focus on safety and the lens of what sociologists call the agency/ structure relationship it examimes various approaches to this teaching. Drawing on Critical Realism it argues there are deficiencies in both the dominant approach and a number of proposed alternatives as they suffer from various forms of conflationism . By drawing on Critical Realism (CR) a more robust agenda for teaching engineering ethics can be developed. It is argued that CR offers a basis for understanding the range of factors which lead to accidents and disasters. …

Simulation Of Locating Buried Objects Via Fringe Pattern-Based Measurements In An Optical Fiber Sensor-Integrated Continuous-Wave Ground-Penetrating Radar System, Asaf Behzat Şahi̇n, Hati̇ce Gonca Bulur

Turkish Journal of Electrical Engineering and Computer Sciences

A new ground-penetrating radar system that can determine the depth and position of a buried metal cylinder, which is the combination of an optical fiber sensor (OFS), continuous-wave transmitter, and optical communication link, is proposed and simulated in the MATLAB and Optiwave program packages. Employing an optical sensor instead of a standard radio frequency (RF) receiver offers the advantage of preventing electromagnetic interference along the sensor's main unit cable and lower amplification noise. In this paper, the electric field distribution at the OFS due to reflections from the soil surface and the buried object is obtained mathematically using Green's function. …

Intelligent Text Classification System Based On Self-Administered Ontology, Manoj Manuja, Deepak Garg

Turkish Journal of Electrical Engineering and Computer Sciences

Over the last couple of decades, web classification has gradually transitioned from a syntax- to semantic-centered approach that classifies the text based on domain ontologies. These ontologies are either built manually or populated automatically using machine learning techniques. A prerequisite condition to build such systems is the availability of ontology, which may be either full-fledged domain ontology or a seed ontology that can be enriched automatically. This is a dependency condition for any given semantics-based text classification system. We share the details of a proof of concept of a web classification system that is self-governed in terms of ontology population …

Heat Transfer Study Of Porous Media With A Temperature Jump Condition, Pravin Kumar

LSU Master's Theses

Conjugate heat transfer in a porous media is investigated with a temperature jump condition obtained from kinetic gas theory. The temperature jump appears alongside flow boundary condition when the pressure is low, and considered to be in non-continuum regime. This investigation focuses on both one-dimensional and two-dimensional porous media models. The length scale of the pores is 100 microns. The temperature is ambient, and the pressure is low enough to reach the slip-flow regime. The thermal behavior of porous media is investigated using a slot model with a gas trapped between two solid blocks. Aluminum oxide and air are considered …

Modeling, Control, And Optimization Technologies In Electric Drive Vehicles, Hongwen He, Suleiman M. Sharkh, Caiping Zhang, Xuan Joe Zhou, Rui Xiong

Electrical & Computer Engineering Publications

To address the two urgent issues nowadays of protecting the environment and achieving energy sustainability, it is of strategic importance on a global scale to replace oil-dependent vehicles with electric drive vehicles (EDVs). Numerical simulation and optimization are essential to simulate the actual hardware and minimize the development procedure and cost. Accurate and efficient modeling, control, and optimization technologies have been the indispensable tools. EDVs have been continuously improved owing to the advancement of systematic control and power management, energy systems, batteries, and pack technologies, as well as economic and policy incentives, public awareness of energy sustainability/affordability, and environmental concerns. …

Visqol: An Objective Speech Quality Model, Andrew Hines, J. Skoglund, A. C. Kokaram, N. Harte

Articles

This paper presents an objective speech quality model, ViSQOL, the Virtual Speech Quality Objective Listener. It is a signal-based, full-reference, intrusive metric that models human speech quality perception using a spectro-temporal measure of similarity between a reference and a test speech signal. The metric has been particularly designed to be robust for quality issues associated with Voice over IP (VoIP) transmission. This paper describes the algorithm and compares the quality predictions with the ITU-T standard metrics PESQ and POLQA for common problems in VoIP: clock drift, associated time warping, and playout delays. The results indicate that ViSQOL and POLQA significantly …

Occurrence Of Five Different Orthogonal Smectic Phases In A Bent-Core (Bc) Liquid Crystal, S. Sreenilayam, Yuri Panarin, J. K. Vij, A. Lehmann, C. Tschierske

Articles

Five orthogonal smectic phases (Sm-A, Sm-Ab, Sm-APR, Sm-APAR, and Sm-APA) were observed in a 4-cyanoresorcinol bisbenzoate with twoterephthalate–based wings achiral bent-core(BC) compound. The phase behavior was investigated by polarising optical microscopy, second harmonic electro-optic response(EO2) and dielectric spectroscopy. The field dependent biaxiality of polar and non-polar Sm-A phases was studied. It is obviously of enormous scientific significance and practical interest to find five different orthogonal smectic phases in a low molecular weight bent-core (BC) compound at relatively low temperatures.

Dit-Topcon Internship Experience, Audrey Martin, Abigail Iversen

Articles

The Technological University Dublin (DIT: http://www.dit.ie/) is one of the largest Higher Education Institutes in Ireland, with 20,000 students registered and over 2000 members of staff. It has been providing technological higher education for over one hundred and twenty years encompassing the full spectrum of Third Level programmes. During that time the Institute's alumni have played important roles in technical and scientific innovation, economic and social development and culture and education both in Ireland and internationally.

The CEO of Topcon Positioning Systems Inc., Ray O’Connor is a DIT School of Surveying alumnus and in October 2013 Ray visited his …

An Architectural Perspective On Structured Sacred Space—Recent Evidence From Iron Age Ireland, Frank Prendergast

Book/Book Chapter

N/A

Moving As A Whole: Multirobot Traveling Problem Constrained By Connectivity, Yun Wang, Cheng Hu

Turkish Journal of Electrical Engineering and Computer Sciences

A multirobot system provides many advantages over a single robot. In certain situations, robots need to maintain global connectivity while proceeding through tasks such as traveling to spots of interest in an area. This paper formulates the problem of multiple robots traveling while constrained by connectivity and analyzes the limits of increase in total traveling distance (TTD) caused by connectivity constraints. A connection condition is proposed and proven, which can be used to direct the design of solutions. Two algorithms satisfying the connection condition, connected nearest neighbor (CNN) and bold Lin-Kernighan heuristic (B-LKH), are proposed to solve this problem, which …

Exact Solution Of Conducting Half Plane Problems In Terms Of A Rapidly Convergent Series And An Application Of The Multiplicative Calculus, Ali̇ Uzer

Turkish Journal of Electrical Engineering and Computer Sciences

The problem of cylindrical wave incidence on a conducting half plane has been considered. A modal solution for Green's function of the problem is transformed into contour integral representations in a complex plane. Some contour deformations and changes of variables are then made for the integrals. Finally, the resultant integrals are transformed back into a series, which converges rapidly to the exact solution when the observation angles are close to the reflection/shadow boundaries (RSBs) of the conducting half plane. The multiplicative calculus is employed in deriving an expression that can be used for obtaining approximate solutions when the observation angles …

Capacitive Sensor Supporting Multiple Touch Switches Using A Resistor String, Kwangsu Seong

Turkish Journal of Electrical Engineering and Computer Sciences

In a low-cost integrated circuit (IC) chip, the packaging cost is a considerable portion of the total manufacturing cost of the chip. As the packaging cost is directly related to the total number of I/O pins, it is highly desirable to minimize the number of I/O pins while maintaining the same functionality. We propose a capacitive sensor that supports multiple touch switches with only two IC pins. The electrode plates of the touch switches are placed at the ends of a resistor string and between every two adjacent resistors in the resistor string. The proposed method measures rise times at …

Optimal Backup Parent Pools For Resilient Multicast Trees On Peer-To-Peer Networks, Emrullah Turhan Tunali, Müge Sayit

Turkish Journal of Electrical Engineering and Computer Sciences

Due to churn as well as node and link failures in peer-to-peer (P2P) networks, providing resilient multicast is a challenging issue, particularly for overlay trees. In this work, we first study analytical properties of the backup parent pool that aims at improving the resilience of overlay multicast trees in P2P video streaming. We then present a novel greedy degree-constrained multicast tree construction algorithm that addresses the tradeoffs between maximizing resiliency, maximizing bandwidth utilization, and minimizing delay. The choice of essential design parameters is studied together with seamlessness of the streaming under a variety of fault scenarios. Simulation results indicate that …

Performance Evaluation Of Three Phase Srf-Pll And Maf-Srf-Pll, Anirban Ghoshal, Vinod John

Turkish Journal of Electrical Engineering and Computer Sciences

Synchronous reference frame phase locked loop (SRF-PLL) is a well established technique used for maintaining synchronism of a grid connected VSI with an electric grid. Many methods of PLL are present in the literature to achieve improved performance under nonideal grid condition. These solutions are based on SRF-PLL structure along with some modification to achieve improved performance. It is observed that faster and better performance are achieved at the expense of more computations. Moving average filter (MAF) SRF-PLL structure is one such solution that consumes less resources and gives a reasonably fast response. In this work the performance of a …

An Elegant Emergence Of Optimal Siting And Sizing Of Multiple Distributed Generators Used For Transmission Congestion Relief, Rajamanickam Manickaraj Sasiraja, Velu Suresh Kumar, Sankaralingam Ponmani

Turkish Journal of Electrical Engineering and Computer Sciences

After the implementation of deregulation in a power system, an appreciable volume of renewable energy sources is used to generate electric power. Even though they are intended to improve the reliability of the power system, the unpredictable outages of generators or transmission lines, an impulsive increase in demand, and failures of other equipment lead to congestion in one or more transmission lines. There are several ways to alleviate this transmission congestion, such as the installation of new generation facilities in the place where the demand is high, the addition of a new transmission facility, generation rescheduling, and curtailment of load …

Process Monitoring In Additive Manufacturing Aimed Toward Part Qualification, Shakerur Ridwan

Open Access Theses & Dissertations

Additive Manufacturing (AM), or layer-by-layer part fabrication, has played a tremendous role in the maker culture by allowing ideas to be materialized with limited resources or knowledge in manufacturing. Various cutting edge AM technologies exist today that are used to create end-use parts; however, these technologies are still new and the processes have not gone through the rigorous evaluation process that traditional manufacturing (i.e. milling, stamping, casting) methods have been through. As a result, several important questions arise when looking to adapt AM technology, including control of the manufacturing process, effect of manufacturing process on part properties, level of variance …

Adaptive Control For Autonomous Navigation Of Mobile Robots Considering Time Delay And Uncertainty, Stephen Kofi Armah

Dissertations

Autonomous control of mobile robots has attracted considerable attention of researchers in the areas of robotics and autonomous systems during the past decades. One of the goals in the field of mobile robotics is development of platforms that robustly operate in given, partially unknown, or unpredictable environments and offer desired services to humans. Autonomous mobile robots need to be equipped with effective, robust and/or adaptive, navigation control systems. In spite of enormous reported work on autonomous navigation control systems for mobile robots, achieving the goal above is still an open problem. Robustness and reliability of the controlled system can always …

Development Of A Row-Crop Tractor Data Acquisition System, James Roeber, Santosh Pitla, Roger M. Hoy, Joe D. Luck

Department of Agricultural and Biological Systems Engineering: Presentations and White Papers

Numerous advancements in machinery performance on row-crop agricultural tractors have been made in recent years. Currently, the Organisation for Economic Co-operation and Development (OECD) only tests predetermined points (E.g., max. power, max. torque) for drawbar and hydraulic power. This method of testing has been used for many years with the tractor at a steady state which is usually not typical of row-crop operations. A data acquisition system (DAQ) was designed that records implement energy consumption (E.g., drawbar loading, PTO power, and hydraulic power). The system used a LabVIEW program and a compact data acquisition system (cDAQ) to record data from …

Determination Of Explosive Energy Partition Values In Rock Blasting Through Small-Scale Testing, Joshua Calnan

Theses and Dissertations--Mining Engineering

Blasting is a critical part of most mining operations. The primary function of blasting is to fragment and move rock. For decades, attempts have been made at increasing the efficiency of blasting to reduce costs and increase production. Most of these attempts involve trial and error techniques that focus on changing a single output. These techniques are costly and time consuming and it has been shown that as one output is optimized other outputs move away from their optimum level. To truly optimize a blasting program, the transfer of explosive energy into individual components must be quantified. Explosive energy is …

Kentucky Traffic Collision Facts 2014, Kentucky Transportation Center, Kentucky State Police

Kentucky Transportation Center Research Report

KENTUCKY’S TRAFFIC COLLISION FACTS report for 2014 is based on collision reports submitted to the Kentucky State Police Records Branch. As required by Kentucky Revised Statutes 189.635, “every law enforcement agency whose officers investigate a vehicle accident of which a report must be made…shall file a report of the accident…within ten days after investigation of the accident upon forms supplied by the bureau.” The stated purpose of this requirement is to utilize data on traffic collisions for such purposes as will improve the traffic safety program in the Commonwealth. Data contained in this report are based solely on the observations …

Test 2121: Case Ih Magnum 240, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2116: John Deere 5100m, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2119: Case Ih Magnum 200, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2114: John Deere 5075m, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2105: John Deere 6145r Autoquad-Plus, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2111: John Deere 9520r, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …