Engineering Commons^™

Scaling Laws For Radial Foil Bearings, Srikanth Honavara Prasad

Mechanical and Aerospace Engineering Theses - Archive

The effects of fluid pressurization, structural deformation of the compliant members and heat generation in foil bearings make the design and analysis of foil bearings very complicated. The complex fluid-structural-thermal interactions in foil bearings also make modeling efforts challenging because these phenomena are governed by highly non-linear partial differential equations. Consequently, comparison of various bearing designs require detailed calculation of the flow fields (velocities, pressures), bump deflections (structural compliance) and heat transfer phenomena (viscous dissipation in the fluid, frictional heating, temperature profile etc.,) resulting in extensive computational effort(time/hardware). To obviate rigorous computations and aid in feasibility assessments of foil bearings …

Stiffness Response Of Chemically Stabilized Sulfate Rich Soil Via Resonant Column Test, Miftah Semane

Civil Engineering Theses - Archive

Stabilization of expansive soils using lime and cement additives have been used by practitioners over the last few years. However, recent heaving and premature pavement failures in lime and cement-treated subgrades containing sulfates led to questioning the validity of calcium based stabilization. When expansive soils containing sulfates are treated with calcium-based stabilizers, the calcium from the stabilizer reacts with soil sulfates and alumina to form the expansive mineral Ettringite.A series of resonant column (RC) tests (ASTM D 4015-92) was conducted on several chemically stabilized specimens of high-plasticity, sulfate-rich expansive clay from Sherman, Texas. Test results were used to assess the …

Model Block Press, Jordan Brown, Michael Evans, Connor Morrow

Mechanical Engineering

The Center for Vocational Building Technology came to the Mechanical Engineering department at Cal Poly, San Luis Obispo with a project to create a new, less expensive model block press than their current BP9 design. This press would produce ¼ scale model compressed earth blocks to be sold as souvenirs and used in demonstrations for constructing buildings. After analyzing the design of the current block presses, JCM came up with the BP10 design. The BP10 operates similarly to the larger block presses, but will cost significantly less to produce and will have some of the design features enhanced to make …

Self-Healing Catalysts: Co3O4 Nanorods For Fischer-Tropsch Synthesis, Cun Wen, Darrius D. Dunbar, Xin Zhang, Jochen A. Lauterbach, Jason R. Hattrick-Simpers

Faculty Publications

We combine kinetic and spectroscopic data to demonstrate the concept of a self-healing catalyst, which effectively eliminates the need for catalyst regeneration. The observed self-healing is triggered by controlling the crystallographic orientation at the catalyst surface.

Mobile Design Stations And Teaching Walls, Diana D. Glawe

Engineering Faculty Research

A versatile, robust, and mobile design station can be economically constructed by integrating off-the shelf components with a clever custom framework. Ten such design stations are performing wonderfully in the new Center for Sciences and Innovation at Trinity University. Each unit supports the engineering design process from brainstorming and prototype design through construction and testing. The unit includes a permanent whiteboard, a removable white board, a flat-screen display, power outlets, data ports, storage (for tools, supplies, and student back packs) and a compartment to house electronic equipment hardwired into the unit. All this and a custom worktable for under $15,000. …

Development Of A Moldable Composite Bone Graft Substitute Releasing Antibacterial And Osteogenic Drugs, Matthew E. Brown

Theses and Dissertations--Biomedical Engineering

Large infected bone defects (IBD) are very complicated to treat due to their high variability; they often require multiple procedures. Bone autografts are the gold standard for treatment but have several drawbacks, such as a need for a second surgery site, limited grafting material, and donor site morbidity. The objective of this research was to develop a moldable synthetic bone grafting material capable of releasing both antimicrobial and osteogenic drugs over a clinically relevant time course for the treatment of IBDs. Current treatment methods for large IBDs require two separate procedures to treat the bone defect and the infection.

This …

Control Of The Surficial Fine-Grained Laminae Upon Stream Carbon And Nitrogen Cycles, William I. Ford Iii

Theses and Dissertations--Civil Engineering

This dissertation investigated the impact of the Surficial Fine-Grained Laminae (SFGL) upon stream biogeochemical cycles to constrain stream C and N budgets. Collection and analysis of 8 years of transported sediment elemental and isotopic signatures, weekly, from a SFGL dominated stream, a novel dissolved C and N dataset, statistical and time-series analysis of sediment and dissolved data, and development of a comprehensive modeling framework that couples hydrodynamics, sediment, C and N biogeochemistry, and stable isotope sub-models to simulate fluvial C and N budgets was used. SFGL C modeling suggests benthic particulate C stocks and transport vary seasonally and annually but …

Deformation And Shear Behaviors Of Weathered Compacted Shale, Xu Zhang

Theses and Dissertations--Civil Engineering

As an abundant sedimentary rock, shale is widely used as construction material around the world. However, shale is a fissile and laminated material and is therefore subject to deterioration due to environmental and chemical forces (i.e., weathering), which is possible to cause high maintenance cost on associated structures and failures of earth slopes and embankments. However, currently, there is lack of efficient method to monitor the weathering process of shale. This thesis uses several shale samples collected from the commonwealth of Kentucky to study the deformation and shear behaviors of weathered compacted shale. A new electrical approach was developed to …

Development Of Indirect Ring Tension Test For Fracture Characterization Of Asphalt Mixtures, Alireza Zeinali Siavashani

Theses and Dissertations--Civil Engineering

Low temperature cracking is a major distress in asphalt pavements. Several test configurations have been introduced to characterize the fracture properties of hot mix (HMA); however, most are considered to be research tools due to the complexity of the test methods or equipment. This dissertation describes the development of the indirect ring tension (IRT) fracture test for HMA, which was designed to be an effective and user-friendly test that could be deployed at the Department of Transportation level. The primary advantages of this innovative and yet practical test include: relatively large fracture surface test zone, simplicity of the specimen geometry, …

The Study Of Trunk Mechanical And Neuromuscular Behaviors, Brian D. Koch

Theses and Dissertations--Biomedical Engineering

Low back pain (LBP) is a common ailment in the United States, affecting up to 80% of adults at least once in their lifetime. Although 90% of LBP cases are considered nonspecific, recent studies show that abnormal mechanics of the lower back can be a major factor. One method of assessing the lower back mechanical environment is through perturbation experiments. An intensive literature review of perturbation systems was used to select and develop a system for the Human Musculoskeletal Biomechanics Lab (HMBL). Following construction, individuals with high/low exposure to day-long physical activity were assessed to quantify daily changes in their …

Stabilization Of Extended Diffuse Optical Spectroscopy Measurements On In Vivo Human Skeletal Muscle During Dynamic Exercise, Brad A. Henry

Theses and Dissertations--Biomedical Engineering

This research investigates various applications of diffuse correlation spectroscopy (DCS) on in-vivo human muscle tissue, both at rest and during dynamic exercise. Previously suspected muscle tissue relative blood flow (rBF) baseline shift during extended measurement with DCS and DCS-Near infrared spectroscopy (NIRS) hybrid optical systems are verified, quantified, and resolved by redesign of optical probe and alteration in optical probe attachment methodology during 40 minute supine bed rest baseline measurements. We then translate previously developed occlusion techniques, whereby rBF and relative oxygen consumption rV̇O₂ are calibrated to initial resting absolute values by use of a venous occlusion (VO) and …

Calibration Of Non-Nuclear Devices For Construction Quality Control Of Compacted Soils, Joshua E. R. Wells

Theses and Dissertations--Civil Engineering

Inadequate compaction of a soil subgrade can lead to detrimental outcomes that are not only costly but dangerous to the general public. To avoid this, quality control (QC) devices such as the nuclear density gauge (NDG) are currently being used to monitor the compaction and moisture content of soil subgrades. However, regulatory concerns associated with the NDG have encouraged federal and state agencies, as well as the heavy civil construction industry to consider non-nuclear devices for QC testing of compacted soils. One such non-nuclear device is the Soil Density Gauge (SDG), which utilizes electromagnetic wave propagation to obtain soil properties …

Bioerodible Calcium Sulfate Bone Grafting Substitutes With Tailored Drug Delivery Capabilities, Bryan R. Orellana

Theses and Dissertations--Biomedical Engineering

Bone regeneration or augmentation is often required prior to or concomitant with implant placement. With the limitations of many existing technologies, a biologically compatible synthetic bone grafting substitute that is osteogenic, bioerodible, and provides spacing-making functionality while acting as a drug delivery vehicle for bioactive molecules could provide an alternative to ‘gold standard’ techniques.

In the first part of this work, calcium sulfate (CS) space-making synthetic bone grafts with uniformly embedded poly(β-amino ester) (PBAE) biodegradable hydrogel particles was developed to allow controlled release of bioactive agents. The embedded gel particles’ influence on the physical and chemical characteristics of CS was …

Development Of Cementitious Materials For Adhesion Type Applications Comprising Calcium Sulfoaluminate (Csa) Cement And Latex Polymer, Joshua V. Brien

Theses and Dissertations--Civil Engineering

The objective of this research was to develop high performing polymer modified calcium sulfoaluminate (CSA) cement materials for use in applications requiring superior adhesion characteristics. Little information is available describing interactions of CSA cement containing minor phase tri-calcium aluminate (C₃A) with commonly used admixtures. Given the scarcity of information, a basic approach for developing cementitious materials was followed. The basic approach consisted of four tasks: cement design, admixture design, polymer design and testing developed materials. The iterative, time consuming process is necessary for understanding the influence of specific constituent components on overall system behavior. Results from the cement …

Mucoadhesive Films For Treatment Of Local Oral Disorders: Development, Characterization And In Vivo Testing, Sandeep K. Ramineni

Theses and Dissertations--Biomedical Engineering

Mucoadhesive drug delivery systems which are being used from 1980’s to avoid first pass metabolism of drugs, commercially exist for only systemic drug delivery with fast erosion times (15-60 min), that may not be appropriate for local oral disorders. The goal of this research was to develop and characterize mucoadhesive films with flexibility of carrying different drugs and proteins and provide sustained release for local treatment of oral disorders.

Mucoadhesive films composed of polyvinylpyrrolidone (PVP) and carboxymethlycellulose (CMC) were formulated with imiquimod, an immune response modifier. Problems such as solubilization of imiquimod to increase drug loading, uniformity in films and …

Precise Control Of Carbon Nanotube Membrane Structure For Enzyme Mimetic Catalysis, Nicholas W. Linck

Theses and Dissertations--Chemical and Materials Engineering

The ability to fabricate a charge-driven water pump is a crucial step toward mimicking the catalytic ability of natural enzyme systems. The first step towards making this water pump a reality is the ability to make a carbon nanotube (CNT) membrane with uniform, 0.8 nm pore diameter. Proposed in this work is a method for synthesizing these carbon nanotubes via VPI-5 zeolite templated, transition metal catalyzed pyrolysis. Using a membrane composed of these CNTs, it is possible to get water molecules to flow single file at a high flow rate, and to orient them in such a way that would …

Clogging Of Fine Sediment Within Gravel Substrates: Macro-Analysis And Momentum-Impulse Model, Davis Huston

Theses and Dissertations--Civil Engineering

An understanding of the clogging of fine sediments within gravel substrates is advanced through the use of dimensional analysis and macro-analysis of clogging experiments in hydraulic flumes. Dimensional analysis is used to suggest that the dimensionless clogging depth can be collapsed using the original and adjusted bed-to-grain ratios, substrate porosity, roughness Reynolds number, and Peclet number. Macro-analysis followed by statistical analysis of 146 experimental test results of fine sediment deposition in gravel substrates suggests that the dimensionless clogging depth can be collapsed using the substrate porosity and roughness Reynolds number reflecting the processes of gravity settling and turbulence induced fluid …

Relationships Of Long-Term Bisphosphonate Treatment With Measures Of Bone Microarchitecture And Mechanical Competence, Jonathan Joseph Ward

Theses and Dissertations--Biomedical Engineering

Oral bisphosphonate drug therapy is a common and effective treatment for osteoporosis. Little is known about the long-term effects of bisphosphonates on bone quality. This study examined the structural and mechanical properties of trabecular bone following 0-16 years of bisphosphonate treatment. Fifty-three iliac crest bone samples of Caucasian women diagnosed with low turnover osteoporosis were identified from the Kentucky Bone Registry. Forty-five were treated with oral bisphosphonates for 1 to 16 years while eight were treatment naive. A section of trabecular bone was chosen from a micro-computed tomography (Scanco µCT 40) scan of each sample for a uniaxial linearly elastic …

Additives To Control Mechanical Properties And Drug Delivery Of Injectable Polymeric Scaffolds, Paul Fisher

Theses and Dissertations--Biomedical Engineering

In situ forming implants (ISIs) are popular due to their ease of use and local drug delivery potential, but they suffer from high initial drug burst, and release behavior is tied closely to solvent exchange and polymer properties. Additionally, such systems are traditionally viewed purely as drug delivery devices rather than potential scaffold materials due to their poor mechanical properties and minimal porosity. The aim of this research was to develop an injectable ISI with drug release, mechanical, and microstructural properties controlled by micro- and nanoparticle additives.

First, an injectable ISI was developed with appropriate drug release kinetics for orthopedic …

Decelerating Open Channel Flow Over Gravel: Turbulence Structure & Sensor Development, Robert L. Stewart Iii

Theses and Dissertations--Civil Engineering

This dissertation describes investigations of fully turbulent decelerating hydraulically roughbed flow over gravel and the development of technology to measure turbulence and associated sediment transport in streams. Theory is developed for predicting velocity distributions in simple uniform flow using the asymptotic invariance principle and tested using laboratory and field collected data. A mixed scale is developed that accounts for bed derived turbulent structures throughout the flows depth and is used to parameterize the external boundary’s effect on the flow for the logarithmic and outer layers. The asymptotic invariance principle and similarity analysis is conducted for the equations of motion in …

Evaluating Sampling Strategies For Rainfall Simulation Studies And Surface Transport Of Antibiotics From Swine Manure Applied To Fescue Plots, Holly K. Enlow

Theses and Dissertations--Biosystems and Agricultural Engineering

Antibiotics are commonly used in animal agriculture to treat and prevent diseases and promote growth. Unfortunately, large amounts of antibiotics are not metabolized, but instead are excreted in urine and feces. Rainfall simulation studies were used to investigate the transport of the antibiotic oxytetracycline and various constituents in runoff and the ability of alum to reduce pollutant transport. Runoff samples were collected at several points during the simulated storm event from each of four treatments: control (C), manure only (M), manure and antibiotics (MA), and manure, antibiotics and alum (MAA). Flow-weighted composite samples were created and compared to the flow …

Sequential Co-Culture Of Anaerobic Bacteria On Switchgrass In A Continuous Flow-Through Reactor For Biofuel Production, Noelia M. Elia

Theses and Dissertations--Biosystems and Agricultural Engineering

Solid substrate cultivation (SSC) using lignocellulosic non-food feedstock, such as switchgrass, is an alternative for advanced biofuel production. Acetone-Butanol-Ethanol (ABE) fermentation in two stages using a sequential culture of microorganisms from the class Clostridia is an approach proposed to increase the butanol production.

The goal was to test the efficacy of a sequential culture on high solid substrate cultivation in batch and continuous cultivation, and to evaluate conditions to optimize butanol production using switchgrass as substrate.

Initial batch experiments were used to determine particle size effect, choice of solvent producer and pretreatment evaluation: The effect of particle size on gas …

Storm Hydrograph Characteristics And Curve Numbers Of Loose-Dumped Spoil In Eastern Kentucky, Mary Katherine Weatherford

Theses and Dissertations--Biosystems and Agricultural Engineering

Traditional mine reclamation often results in highly compacted lands which prohibit tree growth and survival, reduce infiltration rates, and increase runoff. In 2005, six 0.4 ha plots were constructed on the Bent Mountain surface mine in eastern KY by the University of Kentucky in accordance with Forestry Reclamation Approach’s low compaction guidelines. The plots consisted of two replications each of (1) brown weathered sandstone (BROWN), (2) gray unweathered sandstone (GRAY), (3) and a combination of both sandstones and shales (MIXED). The goal of this project was to assess the hydrologic performance on a storm event basis (monitoring years 2012-2013) of …

Low Cost Flow Sensing For Field Sprayers, Yue Zhang

Theses and Dissertations--Biosystems and Agricultural Engineering

Precisely measuring the flow rate in sprayers is a key technology to precision agriculture. With the development of advanced technologies, the demand for the ability to measure flow rate of individual nozzle has become more important and urgent.

This paper investigates the possibility of developing a low-cost flow rate measurement technique. The technique is based on analyzing the acoustic signal from a microphone placed near the nozzle tip. A comparison between acoustic signal and vibration signal was made to study the relations between them. Then several possible locations of the microphone for measuring flow rate were tested and compared, and …

Quantification Of Factors Governing Drug Release Kinetics From Nanoparticles: A Combined Experimental And Mechanistic Modeling Approach, Kyle Daniel Fugit

Theses and Dissertations--Pharmacy

Advancements in nanoparticle drug delivery of anticancer agents require mathematical models capable of predicting in vivo formulation performance from in vitro characterization studies. Such models must identify and incorporate the physicochemical properties of the therapeutic agent and nanoparticle driving in vivo drug release. This work identifies these factors for two nanoparticle formulations of anticancer agents using an approach which develops mechanistic mathematical models in conjunction with experimental studies.

A non-sink ultrafiltration method was developed to monitor liposomal release kinetics of the anticancer agent topotecan. Mathematical modeling allowed simultaneous determination of drug permeability and interfacial binding to the bilayer from release …

Multiscale Modeling Of The Mine Ventilation System And Flow Through The Gob, William Chad Wedding

Theses and Dissertations--Mining Engineering

The following dissertation introduces the hazard of methane buildup in the gob zone, a caved region behind a retreating longwall face. This region serves as a reservoir for methane that can bleed into the mine workings. As this methane mixes with air delivered to the longwall panel, explosive concentrations of methane will be reached.

Computational fluid dynamics (CFD) is one of the many approaches to study the gob environment. Several studies in the past have researched this topic and a general approach has been developed that addresses much of the complexity of the problem. The topic of research herein presents …

Development Of Industry Oriented Cfd Code For Analysis / Design Of Face Ventilation Systems, Todor P. Petrov

Theses and Dissertations--Mining Engineering

Two of the main safety and health issues recognized during deep cut coal mining are methane and dust hazards. Advances in continuous miner technology have improved safety and productivity. However, these advances have created some environmental problems, notably more dust and methane being generated at the face during coal extraction.

Results of studies performed in the last three decades concerning the face ventilation for deep cut mining showed very complicated airflow behavior. The specifics of flow patterns developed by the face ventilation systems presents significant challenge for analytical description even for equipment-free entry. Fortunately, there are methods, such as numerical …

Fragmentation Analysis In The Dynamic Stress Wave Collision Regions In Bench Blasting, Catherine E. Johnson

Theses and Dissertations--Mining Engineering

The first step in many mining operations is blasting, and the purpose of blasting is to fragment the rock mass in the most efficient way for that mine site and the material end use. Over time, new developments to any industry occur, and design and implementation of traditional techniques have to change as a consequence. Possibly the greatest improvement in blasting in recent years is that of electronic detonators. The improvements related to safety and increased fragmentation have been invaluable. There has been ongoing debate within the explosives industry regarding two possible theories for this. Shorter timing delays that allow …

Evaluation Of Overpressure Wave Transition By Airblast Overpressure And Shock Wave Attenuation Analysis Using A Small Black Powder Charge, William R. Weitzel

Theses and Dissertations--Mining Engineering

Eight flush mount pressure sensors were used in a series of 3 test sequences to measure air overpressure produced by a firecracker. Overpressure was recorded at a range of 1 inch to 21 inches away from detonation, and charge weight was determined to be 0.1mg of black powder. Air overpressure prediction equations were developed from test series then compared to collected data for subsequent tests. Overpressure wave velocity was measured using wave arrival time and distance between sensors. This wave velocity was compared to calculated wave velocity using overpressure and ideal gas law. Overpressure and wave velocity are directly related …

Computational Investigation Of Injectable Treatment Strategies For Myocardial Infarction, Hua Wang

Theses and Dissertations--Mechanical and Aerospace Engineering

Heart failure is an important medical disease and impacts millions of people throughout the world. In order to treat this problem, biomaterial injectable treatment injected into the myocardium of the failing LV are currently being developed. Through this treatment, the biomaterial material injections can reduce wall stresses during the cardiac remodeling process. By using computational techniques to analyze the effects of a treatment involving the injection of biomaterial material into the LV after MI, the material parameters of the hydrogel injections can be optimized. The results shows that the hydrogel injections could reduce the global average fiber stress and the …