Engineering Commons^™

Estudy Of Ber Performance In Passive Optical Networks With Different Modulation Techniques, Ayoob Alateeq

Electronic Theses and Dissertations

The amazing growth in the usage of the broadband services has motivated a number of the services' providers to find drastic solutions. The percentage of broadband subscribers has increased from 5.3% of the world population in 2007 to 8.5% of the population in 2011. The increase in the number of subcarriers and a high bandwidth requirement are two motivations to demonstrate the broadband service provision. As a promised demonstration of the broadband provision, professionals use optical fiber to account for the present and the future broadband demand.

Power consumption and bandwidth capacity, which the optical fiber has offered, are two …

Scale Reasoning With Fuzzy-El+ Ontologies Based On Mapreduce, Zhangquan Zhou, Guilin Qi, Chang Lui, Pascal Hitzler, Raghava Mutharaju

Computer Science and Engineering Faculty Publications

Fuzzy extension of Description Logics (DLs) allows the formal representation and handling of fuzzy or vague knowledge. In this paper, we consider the problem of reasoning with fuzzy-EL+, which is a fuzzy extension of EL+. We first identify the challenges and present revised completion classification rules for fuzzy-EL+ that can be handled by MapReduce programs. We then propose an algorithm for scale reasoning with fuzzy-EL+ ontologies using MapReduce. Some preliminary experimental results are provided to show the scalability of our algorithm.

Interaction Of A Shock Tube Exhaust Flow With A Non-Pre-Mixed Flame, Graham Doig, Zebulan Johnson, Rachel Mann

Aerospace Engineering

No abstract provided.

Human Action Recognition Via Fused Kinematic Structure And Surface Representation, Salah R. Althloothi

Electronic Theses and Dissertations

Human action recognition from visual data has remained a challenging problem in the field of computer vision and pattern recognition. This dissertation introduces a new methodology for human action recognition using motion features extracted from kinematic structure, and shape features extracted from surface representation of human body. Motion features are used to provide sufficient information about human movement, whereas shape features are used to describe the structure of silhouette. These features are fused at the kernel level using Multikernel Learning (MKL) technique to enhance the overall performance of human action recognition. In fact, there are advantages in using multiple types …

Vision-Based 3d Human Motion Analysis For Fall Detection And Bed-Exiting, Xiaoxiao Dai

Electronic Theses and Dissertations

Fall is one of the most dangerous and costly accidents that threaten health of elderly people, and a large portion of falls occurs when a patient is trying to exit a bed. This thesis proposes two vision-based approaches for general fall detection and bed-exiting detection for elderly people, respectively. The Kinect sensor is chosen as the major monitoring device.

The first approach exploits the Kinect sensor with its Windows SDK to detect fall activities. The recorded spatial coordinates of the human body joints from Kinect's 3D skeletal view are processed to extract posture features. Then the principle component analysis and …

The Role Of Third Party Logistics Providers (3pls) In The Adoption Of Green Supply Chain Initiatives, Edward Sweeney, Pietro Evangelista, Maria Huge-Brodin, Karin Isaksson

Practitioner Journals

The increasing importance of environmental sustainability has sharpened the focus on the need for innovative approaches to the purchasing of transport and logistics services. This article points out some of the challenges that purchasers of transport and logistics services, as well as their suppliers in the third party logistics (3PL) industry, are facing. These include the need for closer collaboration between 3PLs and their customers, as well as developing systems for the robust assessment of the environmental sustainability of services. The article is based on several years’ research experience inIreland,ItalyandSweden.

Low-Pressure Testing: Microirrigation Emitters, Charles M. Burt, Kyle Feist

BioResource and Agricultural Engineering

ITRC tested 28 different pressure-compensating (PC) models of microirrigation emitting devices from a total of nine manufacturers in order to compare independent laboratory testing with manufacturer specifications. It is the intention of this report to investigate the ability of currently marketed products to operate in a truly low pressure irrigation system where energy inputs, in the form of pump discharge requirements, can be minimized.

Low-Pressure Testing: Pressure Regulating Valves, Charles M. Burt, Kyle Feist

BioResource and Agricultural Engineering

ITRC tested performance characteristics of pressure regulating valves from a variety of manufacturers. The purpose of the testing was to evaluate the ability of different models of valves to regulate the pressure in a low-pressure system. The testing concentrated on three specific valve performance characteristics: minimal variance from the target downstream pressure caused by changes in flow rate or inlet pressure; minimal hysteresis in outlet pressures; minimal pressure loss (at low inlet pressures) across the valve.

Flight Physician - August, 2013, Civil Aviation Medical Association

Browse all Civil Aviation Medical Association Newsletters

A seventeen page newsletter of the Civil Aviation Medical Association. The newsletter provided news about civil aviation medicine and information related to the organization.

The Benefits Of Using Building Information Modeling In Structural Engineering, Cesar Augusto Hunt

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

This paper explores how the use of Building Information Modeling (BIM) can be a beneficial platform for structural engineers. The current state of BIM is analyzed, giving a general overview on how architectural; engineering and construction firms are applying it on their projects. The applicability of BIM to structural engineering is discussed, and how it impacts the structural design and its workflow. The benefits of using BIM in structural engineering are then analyzed, in the areas of productivity, coordination, and visualization, and a case study is developed to test the interoperability between BIM software and structural analysis software. The findings …

A Meta-Analysis Of Critical Success Factors Affecting Mobile Learning, Luiz Fernando Capretz, Muasaad Alrasheedi

Electrical and Computer Engineering Publications

Considering the popularity and ubiquitous nature of mobile phones, the acceptance of m-Learning in educational institutions is limited. While several studies have reviewed m-Learning platforms, different settings and contexts make it difficult to collate these studies and discover the key factors for the successful adoption of m-Learning platform. This study uses meta-analysis technique to compare results from multiple studies assessing the critical m-Learning success factors. We find that learners perceive collaboration opportunities and anytime-anywhere learning possibility as the key benefits of m-Learning. Further, good content presented in a user friendly way is a primary expectation from an m-Learning application.

Design Optimization Of Geometrical Parameters And Material Properties Of Vibrating Bimorph Cantilever Beams With Solid And Honeycomb Substrates For Maximum Energy Harvested, Jasmin Adeshara

All Theses

The objective of this thesis is to maximize the energy harvested from a vibrating bimorph cantilever beam by optimizing the geometrical parameters and the material properties of the piezoelectric beam. A three-dimensional finite element (FEA) model is developed to design a vibrating bimorph cantilever beam for energy harvesting. The reference piezoelectric material used in the design is Lead Zirconate Titanate (PZT-5H) and the substrate sandwiched between the two piezoelectric plates is brass. Three types of models are analyzed and compared in this work by modifying the brass substrate geometry- a solid homogenous substrate, a regular honeycomb substrate and an auxetic …

Effect Of Lightweight Aggregate Moisture Content On Internally Cured Concrete, Casey Jones

Graduate Theses and Dissertations

Putting an end to the rapid deterioration of concrete structures in the United States will only occur through the introduction of better materials and construction methods. The American Society of Civil Engineers (ASCE) reports the overall condition of concrete bridges in the United States to be a "C+". Though better than other areas of the infrastructure, there is still room for improvement in concrete bridges. One major area that may be improved is that of the concrete bridge deck. The bridge deck is comprised of the actual driving surface. It is subject to many deterioration mechanisms including freeze/thaw cycles, de-icing …

Sustainable Operations For Distillation Columns, Yaşar Demirel

Yaşar Demirel Publications

Distillation process consumes about 40% of the total energy used to operate the plants in petrochemical and chemical process industries in North America. Therefore, sustainable distillation column operation requires responsible use of energy and reduction of harmful emission such as CO₂. The Aspen Plus ‘Column Targeting Tool’ (CTT) options in a simulation environment can help reduce the use of energy and hence CO₂ emission. The Aspen plus ‘Carbon Tracking’ (CT) together with the ‘Global Warming Potential’ options can quantify the reduction in CO₂ emission. The CTT is based on the practical near-minimum thermodynamic condition approximation and …

Moving Domain Computational Fluid Dynamics To Interface With An Embryonic Model Of Cardiac Morphogenesis, Juhyun Lee, Mahdi Esmaily Moghadam, Ethan Kung, Hung Cao, Tyler Beebe, Yury Miller, Beth L. Roman, Ching-Ling Lien, Neil C. Chi, Alison L. Marsden, Tzung K. Hsiai

Publications

Peristaltic contraction of the embryonic heart tube produces time- and spatial-varying wall shear stress (WSS) and pressure gradients (∇P) across the atrioventricular (AV) canal. Zebrafish (Danio rerio) are a genetically tractable system to investigate cardiac morphogenesis. The use of Tg(fli1a:EGFP)y1 transgenic embryos allowed for delineation and two-dimensional reconstruction of the endocardium. This time-varying wall motion was then prescribed in a two-dimensional moving domain computational fluid dynamics (CFD) model, providing new insights into spatial and temporal variations in WSS and ∇P during cardiac development. The CFD simulations were validated with particle image …

Nonlinear Dynamics Of Carbon Nanotubes Under Soft Alternating Current Actuation, Le Luo

Theses and Dissertations - UTB/UTPA

This thesis work deals with electrostatically actuated Carbon Nanotubes (CNTs) cantilevers. Four forces are acting on the CNTs cantilever, namely damping, elastic, electrostatic and van der Waals forces. The van der Waals force is significant for values of 50 nm or lower of the gap between the CNTs and the ground substrate. As both electrostatic and van der Waals forces are nonlinear, and the CNTs electrostatic actuation is given by alternating current (AC) voltage, the CNTs undergo nonlinear parametric dynamics. The Method of Multiple Scales (MMS) and Reduced Order Model (ROM) are employed to investigate the system under soft excitation …

Analysis Of Brownsville Public Utilities Board Hybrid Wind And Solar Energy Systems: Case Study And Analysis In Brownsville, Texas, Lina L. Chavez

Theses and Dissertations - UTB/UTPA

Engineers are tasked and responsible for studying and designing environmentally safer forms of electrical generation including wind and solar sources. A national effort to reduce dependency on foreign oil due to economic and environmental impacts is underway and race to full scale implementation of alternate energy sources is eminent. The question looms: Is renewable energy generation for residences feasible from an engineering and economic perspective? Although wind and solar generators are gaining ground on conventional generation methods in different sectors, lack of information with regards to design, implementation, and payback still remain a major roadblock. The objective of this case …

T/O Overruns And Veer-Offs On Slippery Runways With Crosswinds, Nihad E. Daidzic

Aviation Department Publications

No abstract provided.

Measurement Of Emissions From A Passenger Truck Fueled With Biodiesel From Different Feedstocks, Natchanok Pala-En, Melanie L. Sattler, Brian Dennis, Victoria Chen, Rachel L. Muncrief

Civil Engineering Faculty Publications - Archive

Biodiesel has generated increased interest recently as an alternative to petroleum-derived diesel. Due to its high oxygen content, biodiesel typically burns more completely than petroleum diesel, and thus has lower emissions of hydrocarbons (HC), carbon monoxide (CO), and particulate matter (PM). However, biodiesel may increase or decrease nitrogen oxide (NOx) and carbon dioxide (CO2) emissions, depending on biodiesel feedstock, engine type, and test cycle. The purpose of this study was to compare emissions from 20% blends of biodiesel made from 4 feedstocks (soybean oil, canola oil, waste cooking oil, and animal fat) with emissions from ultra low sulfur diesel (ULSD). …

Scitech Book News Reviews, Susan Fingerman

Sci-Tech News

No abstract provided.

Social Capital And Walkability As Social Aspects Of Sustainability, Shannon Rogers, Kevin Gardner, Cynthia Carlson

Civil Engineering Faculty Publications

The concepts of sustainability and sustainable development are frequently described as having three main components, sometimes referred to as the three pillars or the triple bottom line: environmental, economic, and social. Because of an historical focus in the sustainability field on correcting environmental problems, much consideration has been given to environmental issues, especially how they interface with economic ones. Frequently mentioned but rarely examined, the social aspects of sustainability have been considered the weakest and least described pillar. After a brief review of existing concepts and theories, this paper uses a case study approach to examine the third pillar more …

Aspen Plus Simulation Of Biomass Gasification In A Steam Blown Dual Fluidised Bed, Wayne Doherty, Anthony Reynolds, David Kennedy

Book/Book Chapters

The efficient utilisation of biomass resources is of utmost importance. Biomass gasification offers much higher efficiencies than combustion. Gasification is a process in which a fuel is converted to a combustible gas (syngas). A dual fluidised bed gasifier known as the fast internally circulating fluidised bed (FICFB) was selected. It has been demonstrated at industrial scale and data is readily available for model validation. An Aspen Plus model was developed to simulate the FICFB gasifier. The model is based on Gibbs free energy minimisation and the restricted equilibrium method was used to calibrate it. The model has been validated and …

Experimental Development And Analysis Of A Novel Setup For Insulated Dielectrophoresis, Johnie Hodge

All Theses

Dielectrophoresis has long been studied and utilized for the manipulation of microscale particles in solution. This phenomenon is due to the induced polarization of dielectric particles subjected to an electric field. When the field is also inhomogeneous in terms of the distribution of its strength through space, the polarized particles move and come to rest in certain areas due to the relationship between their and the solvent's relative permittivities. If the electric field is homogenous, such as within a parallel plate capacitor, the particles are polarized according to their permittivity and the field's frequency, but they will not move.
These …

Renovation Of Ammonia Contaminated Produced Water Using Constructed Wetlands, Donald Beebe

All Dissertations

Pilot-scale wetland treatment systems were designed and constructed to evaluate renovation of simulated oilfield produced water contaminated with ammonia (20 mg/L ammonia-N). A process-based pilot-scale constructed wetland was designed to meet specific biogeochemical conditions for conversion of ammonia to nitrogen gas through microbial nitrification and denitrification. The process-based constructed wetland treated the simulated produced water to meet stringent discharge requirements (less than 1.2 mg/L ammonia-N). Clinoptilolite, a zeolite mineral, was evaluated for use in constructed wetlands to increase ammonia sorption and nitrification activity. Clinoptilolite increased wetland ammonia sorption capacity and served as a microbial carrier for nitrifying bacteria when ranges …

Mapping The 3d Surface Potential In Bi2se3, Chris Mann, Damien West, Ireneusz Miotkowski, Yong P. Chen, Shengbai Zhang, Chih-Kang Shih

Birck and NCN Publications

Bi2Se3 initially emerged as a particularly promising host of topological physics. However, in actual materials, several issues have been uncovered including strong surface band bending and potential fluctuations. To investigate these concerns, we study nominally stoichiometric Bi2Se3 using scanning tunnelling microscopy. Here we identify two distinct distributions of Bi-Se antisites that act as nanometer-scale sensors for the surface band-bending field. To confirm this, we examine bulk Cu-doped Bi2Se3 and demonstrate a significantly reduced surface band-bending field. In addition, we find that in the case of unintentionally doped Bi2Se3, lateral fluctuations of the Dirac point can be directly correlated with specific …

A Humidity-Sensitive Hydrogel-Bacillus Spore Composite For Micropatterning Of Biomolecular Gradients, Richard L. Gieseck, Bin-Da Chan, Cagri A. Savran

Birck and NCN Publications

A composite material consisting of Bacillus subtilis spores suspended in a humidity sensitive hydrogel can be used to pattern biomolecules in different concentrations directly onto glass surfaces using a mechanical micromanipulator. By altering the relative humidity surrounding the composite gel during deposition, surface concentration of patterned biomolecules can be controlled and varied to create user-defined, biomolecular surface concentrations. (C) 2013 AIP Publishing LLC.

Vascular Reactivity Of Immature Arterialized Capillaries, Sara Hellstrom

Biomedical Engineering

Peripheral arterial occlusive disease (PAOD) is a globally prevalent cardiovascular disease in which atherosclerotic plaques narrow arterial lumen diameters and restrict blood flow to down stream tissues. The impact of these occlusions can be mitigated by collateral vessels that connect parallel arterial branches and act as natural bypasses to maintain perfusion. Some patients with PAOD may not have robust collateral networks to accommodate ischemic tissues in the event of an occlusion and, therefore, may be more susceptible to hypoxia and tissue necrosis. In animal models that lack collateral arterioles, capillaries can arterialize and form functional collaterals; however, in the early …

2013 Tsu Undergraduate Research Program, David Owerbach

Office of Research Institutional Research and Scholarship

No abstract provided.

Evaluation Of Team Quality, Shiva Rama Krishna Murthy Bhagavatula

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

The ever-increasing competitive pressure and sizes of the global markets have forced organizations from both manufacturing and healthcare sectors to rely more on teams. Therefore the success or the failure of an organization depends largely on the overall quality of the teams within that organization. This increased attention towards teams has forced many organizations to focus on improving the overall quality of their teams. This study has three main objectives. The first objective is to structure a comprehensive list of attributes affecting the overall quality of a team in manufacturing and healthcare sectors. The second objective is to use a …

Design And Optimization Of A Railroad Conductive Suspension Element Pad Composed Of Thermoplastic Polyurethane And Carbon Black, Ruben Suarez Jr.

Theses and Dissertations - UTB/UTPA

The AdapterPlus™ Pad, made from thermoplastic polyurethane (TPU), is used to enhance steering and prevent metal-to-metal contact between the railcar side frame and the bearing adapter. Although the AdapterPlus™ Pad acts as a pedestal liner in the suspension assembly, it must allow electric current to flow from the rail, through the bearing adapter wall to the side frame in order to activate a solenoid air valve that releases cargo gates. Currently, the pad uses copper inserts that allow current through. Because the Adapter Plus™ Pad is subject to large dynamic loads, the copper inserts permanently deform losing contact and cutting …