Engineering Commons^™

Characteristics Of Vacuum Freeze Drying With Utilization Of Internal Cooling And Condenser Waste Heat For Sublimation, Muhammad Idrus Alhamid, Nasruddin Yusuf, Indra Teuku Meurah Mahlia, Engkos Ahmad Kosasih, Muhamad Yulianto, Rio Ricardi

Makara Journal of Technology

Vacuum freeze drying is an excellent drying method, but it is very energy-intensive because a relatively long drying time is required. This research investigates the utilization of condenser waste heat for sublimation as a way of accelerating the drying rate. In addition, it also investigates the effect of internal cooling combined with vacuum cooling in the pressure reduction process. Jelly fish tentacles were used as the specimen, with different configurations for condenser heat waste and internal cooling valve opening. The results show that heating with condenser heat waste can accelerate the drying rate up to 0.0035 kg/m2.s. In addition, pre-freezing …

A New Experimental Approach To Evaluate Plasma-Induced Damage In Microcantilever, Yuki Nishimori, Shinji Ueki, Masakazu Sugiyama, Seiji Samukawa, Gen Hashiguchi

Makara Journal of Technology

Plasma etching, during micro-fabrication processing is indispensable for fabricating MEMS structures. During the plasma processes, two major matters, charged ions and vacuum–ultraviolet (VUV) irradiation damage, take charge of reliability degradation. The charged ions induce unwanted sidewall etching, generally called as “notching”, which causes degradation in brittle strength. Furthermore, the VUV irradiation gives rise to crystal defects on the etching surface. To overcome the problem, neutral beam etching (NBE), which use neutral particles without the VUV irradiation, has been developed. In order to evaluate the effect of the NBE quantitatively, we measured the resonance property of a micro-cantilever before and after …

Remotely Accessible Instrumented Monitoring Of Global Development Programs: Technology Development And Validation, Evan A. Thomas, Zdenek Zumr, Jodi Graf, Carson A. Wick, James H. Mccellan, Zachary Imam, Christina Barstow, Kelly Spiller, Michael Fleming

Mechanical and Materials Engineering Faculty Publications and Presentations

Many global development agencies self-report their project outcomes, often relying on subjective data that is collected sporadically and communicated months later. These reports often highlight successes and downplay challenges. Instrumented monitoring via distributed data collection platforms may provide crucial evidence to help inform the sector and public on the effectiveness of aid, and the on-going challenges. This paper presents the process of designing and validating an integrated sensor platform with cellular-to-internet reporting purposely targeted at global development programs. The integrated hardware platform has been applied to water, sanitation, energy and infrastructure interventions and validated through laboratory calibration and field observations. …

Fatigue Life Prediction Of The Keel Structure Of A Tsunami Buoy Using Spectral Fatigue Analysis Method, Angga Yustiawan, Ketut Suastika, Wibowo Harso Nugroho

Makara Journal of Technology

One of the components of the Indonesia Tsunami Early Warning System (InaTEWS) is a surface buoy. The surface buoy is exposed to dynamic and random loadings while operating at sea, particularly due to waves. Because of the cyclic nature of the wave load, this may result in a fatigue damage of the keel structure, which connects the mooring line with the buoy hull. The operating location of the buoy is off the Java South Coast at the coordinate (10.3998 S, 108.3417 E). To determine the stress transfer function, model tests were performed, measuring the buoy motions and the stress at …

The Plasma Electrolysis Phenomenon In A Two-Compartment Reactor For Chlor-Alkali Production, Nelson Saksono, Fakhrian Abqari, Setijo Bismo

Makara Journal of Technology

Chlor-alkali is one of the most important processes in the chemical industry. It produces chlorine and caustic soda, which become the main feedstock of daily products. The aim of this study is to report the phenomenon of plasma electrolysis and how it can be used in chlor-alkali production for more efficient energy consumption. When the plasma is formed, the current fluctuates and gradually declines. Plasma electrolysis begins with the process of electrolysis itself. Due to Joule heating, gas bubbles are formed and a sheath is made on both electrodes, resulting in the plasma field. Plasma electrolysis can be identified by …

Observation Of Photovoltaic Effect And Single-Photon Detection In Nanowire Silicon Pn-Junction, Arief Udhiarto, Sri Purwiyanti, Daniel Moraru, Takeshi Mizuno, Michiharu Tabe

Makara Journal of Technology

We study nanowire silicon pin and pn-junctions at room and low temperature. Photovoltaic effects are observed for both devices at room temperature. At low temperature, nanowire pn-junction devices show their ability to detect single photon. This ability was not been observed for pin devices. Phosphorus-boron dopant cluster in the depletion region is considered to have the main role for single-photon detection capability. Fundamental mechanism of dopant-based single-photon detection in nanowire pn-junction is described in details.

Influences Of Surface Morphology Of Nanostructured Rutile Tio2 Nanorods/Nanoflowers As Photoelectrode On The Performance Of Dye-Sensitized Solar Cell, Mohd Khairul Bin Ahmad, Kenji Murakami

Makara Journal of Technology

Aligned Rutile TiO2 nanorods (r-TNRs) and TiO2 nanoflowers (r-TNFs) were successfully prepared by hydrothermal method. Using hydrochloric acid (HCl) as chelating agent and titanium butoxide (TBOT) as precursor, aligned r-TNRs with r-TNFs were successfully growth onto fluorine-doped tin oxide (FTO) with different morphologies. The influences of surface morphologies to the rutile based Dye-sensitized solar cell (DSC) efficiency are discussed. The highest lightto- electric energy conversion efficiency, 1.80% is achieved using different concentration under simulated solar light illumination of 100 mWcm-2 (1.5 AM).

Improvement In Performance Of Zno Based Dsc Prepared By Spraying Method, Rangga Winantyo, Devinda Liyanage, Kenji Murakami

Makara Journal of Technology

This paper reports the effect of TiCl4 on the performance of ZnO based DSC. ZnO was used due to its stability against photo-corrosion and photochemical properties similar to TiO2. Thin films of nanocrystalline ZnO were deposited on transparent conducting oxide glass using spray method. The ZnO films were treated using TiCl4. The cell’s efficiency was found to be 2.5% with TiCl4 post-treatment and 1.9% without TiCl4 post-treatment.

Determining The Air Gap Length Of An Axial Flux Wound Rotor Synchronous Generator, Abdul Multi, Iwa Garniwa, Uno Bintang Sudibyo

Makara Journal of Technology

The air gap length of the designed axial flux wound rotor (AFWR) synchronous generator is determined properly according to the design parameters. One of the distinct advantages of an axial flux (AF) machine is its adjustable air gap. An AF generator’s performance might be controlled by adjusting its air gap. The designed generator has a smallscale capacity that has 1 kW, 380 V, and 50 Hz. The windings are laid into slots made from laminated core. The slots are carved in the face of the stator and rotors. The generator has a single-double-sided slotted wound stator sandwiched between twin rotors. …

Production Optimization For Plan Of Gas Field Development Using Marginal Cost Analysis, Suprapto Soemardan, Widodo Wahyu Purwanto, Arsegianto Arsegianto

Makara Journal of Technology

Gas production rate is one of the most important variables affecting the feasibility plan of gas field development. It take into account reservoir characteristics, gas reserves, number of wells, production facilities, government take and market conditions. In this research, a mathematical model of gas production optimization has been developed using marginal cost analysis in determining the optimum gas production rate for economic profit, by employing the case study of Matindok Field. The results show that the optimum gas production rate is mainly affected by gas price duration and time of gas delivery. When the price of gas increases, the optimum …

Passive Stormwater Samplers For Sampling Highway Runoff From Bmps: Feasibility Studies, Mitchell R. Klein

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Pollution from highway stormwater runoff has been an increasing area of concern within the environmental field. To respond to the need for reduced contamination within runoff many Best Management Practices (BMPs) have been implemented. One difficult aspect of BMPs is monitoring their effectiveness along with determining effluent concentrations. The current methods for stormwater sampling include sending technicians or installing an auto-sampler to collect either grab or composite samples. These methods become costly, cumbersome and infeasible due to the potentially large amount of BMPs across a region and the irregularity and difficulty of predicting storms. Passive samplers have proven themselves as …

Measurement And Description Of Dynamics Required For In Vivo Surgical Robotics Via Kinematic Methods, Jacob G. Greenburg

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

With the goal of improved recovery times and reduced trauma to the patient there has been a substantial shift in the medical community’s demand for minimally invasive surgical (MIS) techniques. With the standardization of MIS becoming more commonplace in the medical field there are still many improvements that are desired. Traditional, manual methods of these surgeries require multiple incisions on the abdomen for the tools and instruments to be inserted. The more recent demand has been to localize the incisions into what is being referred to as a Laparoendoscopic Single-Site (LESS) surgery. Furthermore, the manual instruments that are commonly used …

Mechanical Design Of Pird (Principal Investigator Rack Drawer) For Sofia, Hari Prasad Shetty Mr., Murali Krishna Kandlagunta Mrs., John Miles Mr., Zaheer Ali Mr.

STAR Program Research Presentations

SOFIA, the world’s largest airborne observatory with 2.5-meter diameter infrared telescope is equipped with 7 instruments: EXES, FIFI-LS, FLITECAM, FORCAST, GREAT, HAWC, and HIPO. Flying at altitudes between 39,000 and 45,000 feet, SOFIA avoids 99% of the atmospheric water vapor, records and analyzes the infrared radiation from the cosmos. SOFIA is able to observe the occultation of stars by solar system objects. By determining the size, compositions, and atmospheric structures of these objects, SOFIA can help answer the questions on creation and evolution of the universe, formation of the stars and planets, and nature of black hole at the center …

Characterization Of Samples For Optimization Of Infrared Stray Light Coatings, Carey L. Baxter, Rebecca Salvemini, Zaheer A. Ali, Patrick Waddell, Greg Perryman, Bob Thompson

STAR Program Research Presentations

NASA’s Stratospheric Observatory for Infrared Astronomy (SOFIA) is a converted 747SP that houses a 2.5 m telescope that observes the sky through an opening in the side of the aircraft. Because it flies at altitudes up to 45,000 feet, SOFIA gets 99.99% transmission in the infrared. Multiple science instruments mount one at a time on the telescope to interpret infrared and visible light from target sources. Ball Infrared Black (BIRB) currently coats everything that the optics sees inside the telescope assembly (TA) cavity in order to eliminate noise from the glow of background sky, aircraft exhaust, and other sources. A …

Smart Sampling Of Noble Gases To Detect Underground Nuclear Explosions, Lindsey M. Skelton, Steven Hunter, Charles Carrigan

STAR Program Research Presentations

One element of the Comprehensive Nuclear Test Ban Treaty (CTBT) is the provision for an on site inspection (OSI). The purpose of an OSI is to monitor for the occurrence of an underground nuclear explosion (UNE) in violation of the treaty. Detection of certain rare radioactive noble gases transported to the surface can be an excellent indicator of a UNE. These gases can be very difficult to capture and require specialized sampling methods. This study aims to determine an algorithm that will increase the efficiency of the subsurface gas sampling technique being used to detect UNEs. Continuous sampling of subsurface …

Life Support: Long Term Storage Of Solid Waste In An Enclosed Membrane System, Emmy O. Trieu, Michael Flynn, Rocco Mancinelli

STAR Program Research Presentations

In deep space missions, maintaining life support is of the utmost priority. In such a closed system, human waste must be stored and treated. Simulated feces (ersatz) will be inoculated with microbes representing normal fecal flora, mixed with urine brine and shredded refuse of products typically used in space missions. Composting methods often use alternating layers of waste with scraps of carboniferous materials (finely shredded refuse). By preparing membrane bags with a homogenized ersatz and carboniferous refuse mixture and membrane bags with alternating layers of ersatz and carboniferous refuse, it may be possible to monitor anaerobic thermophillic digestion of the …

If It Isn’T Tested, It Doesn’T Work: Automated Verification Of Sofia Data Handling Software, Garrett Holthaus, Brett Stroozas, Zaheer Ali

STAR Program Research Presentations

This project involves writing code to automate the verification testing of the Data Handling Working Group (DHWG) software tools for the Stratospheric Observatory for Infrared Astronomy (SOFIA). The DHWG tools extract engineering data from SOFIA missions. Engineering data includes a variety of information on the operations and status of SOFIA systems during a flight, including computer network traffic, user commands, and images acquired from cameras mounted on the telescope assembly. It is important to review engineering data because this data can lead to the discovery of any problems or inefficiencies in SOFIA hardware and software. Analysis of engineering data can …

C-Ring Contaminate Identification By Spectroscopy And Elemental Mapping, Thien Q. Vu-Nguyen, Bernice Mills

STAR Program Research Presentations

A silver plated steel c-ring used to seal two steel pieces together was found to have contamination upon disassembly. Auger and x-ray fluorescence spectroscopy and mapping were used to identify the contaminate as molybdenum disulfide lubricant. Recommendations were made to avoid such contamination in the future.

Creating A Package In R, Brit Schneiders, Eric Archer

STAR Program Research Presentations

In a time of increasingly efficient technology and data production, scientists are producing data faster than it can be analyzed. Therefore, user accessibility to data analysis is becoming more and more critical. In general, researchers have a set of raw data and want an efficient means to their final analysis. A package serves as that means by creating a set of functions and making them accessible to the user. Often, a user has a small piece of code to run (a single R script, for example), and that script requires the use of certain functions, which are contained in a …

Characterization Of The Drilling Via The Vibration Augmenter Of Rotary-Drills And Sound Signal Processing Of Impacted Pipe As A Potential Water Height Assessment Tool, Nicholas Morris

STAR Program Research Presentations

The focus of the internship has been on two topics: a) Characterize the drilling performance of a novel percussive augmenter – this drill was developed by the JPL’s Advanced Technologies Group and its performance was characterized; and b) Examine the feasibility of striking a pipe as a means of assessing the water height inside the pipe. The purpose of this investigation is to examine the possibility of using a simple method of applying impacts to a pipe wall and determining the water height from the sonic characteristic differences including damping, resonance frequencies, etc. Due to multiple variables that are relevant …

Experimental Investigation Of Blowing Effects On Turbulent Flow Over A Rough Surface, Mark A. Miller, Alexandre Martin, Sean C. C. Bailey

Mechanical Engineering Faculty Publications

A high Reynolds number turbulent channel flow facility was used to study the combined effects of roughness and flow injection on the mean flow and turbulence characteristics. It was found that the additional momentum injection through the surface enhanced the roughness effects and for the mean flow the effect of blowing was indistinguishable from that of increased roughness. However, for the turbulence statistics, this analogy broke down in that the addition of blowing resulted in behavior which did not follow that predicted by Townsend’s hypothesis. This was observed as a reduction of outer-scaled Reynolds stress well into the outer layer. …

The Design And Fabrication Of An Electrostatically Actuated Diaphragm With A Silicon-On-Insulator Wafer, Elizabeth L. Brooks

Master's Theses

Electrostatically actuated silicon membranes were designed, modeled, fabricated, and characterized. The intended application was for use in a microspeaker. Fabrication issues necessitated the use of thick diaphragms with a large gap between the electrodes. The devices did not function as speakers but did show actuation with a high DC voltage. Device dimensions were chosen by examining membrane mechanics, testing the processing steps required for device fabrication, and modeling with COMSOL. Several adhesives were researched to fabricate the device sidewalls, including BCB, PMMA, and TRA-Bond F112. A method for patterning PMMA through photolithography was found using a scanning electron microscope. Masks …

Design, Fabrication And Test Of An Operationally Responsive Aircraft With Niirs Evaluated Imager, Colin Burt

Master's Theses

Unmanned Aerial Systems (UAS) are a growing asset. Currently UAS are on the cutting edge with resources being spent developing the capabilities mostly for military use. This project is intended to create a system for non-defense customers. Specifically, the Operationally Responsive Aircraft (ORA) will appeal to academic institutions, individual consumers, future customers new to the UAS industry, as well as anybody trying to get airtime for custom sensors.

The system developed in this project utilizes dual aluminum external payload bays attached to a ParkZone Radian aircraft. Each external payload bay can contain approximately 500 $\text{cm}^3$, with a height and width …

Acuta Enews August 2013 Vo. 42, No. 8

ACUTA Newsletters

In this Issue.,,

1 Sewanee Campus Celebrates IEA Award

2 Regulatory Webinar on Section 255

2 ACUTA Webinar: What's on the Radar?

2 Sneak Peek at 2014 ACUTA journal Topics i

Vendor System lntegrations Accelerate in the Safety 6 Security Industry j

Seeking Presenters for Winter Seminar

4 Deja vu All Over Again: Can We Please Put SDNs in Context?

5 Some Thoughts about Fiber Optics

6 lnfo Links

6 Mark Your Calendar for Fall Seminar

7 Looking for a Few Good Coordinators

7 Board Report

8 Welcome New Members

8 Check It Out

Finite Element Models Of The Knee & Hip Joints: Using Opensim To Predict Muscle Forces, Kevin S. Jones, Spencer D. Wangerin, Jeffrey D. Pyle, Stephen M. Klisch, Scott J. Hazelwood

STAR Program Research Presentations

Quantitative data of stresses and strains in the cartilage of the knee and hip joints are required to design prostheses and can be used to give accurate advice to patients with cartilage damage as to which activities should be avoided. Instrumented hip implants can only give the overall resultant force in the joint, not the stresses and strains throughout the cartilage. Finite Element (FE) models of the Knee and Hip are being constructed in order to obtain the stresses and strains in articular (of the joint) cartilage. Muscle forces and joint contact forces are required as inputs to these FE …

Tools And Methods To Optimize The Analysis Of Telescopic Performance Metrics On Sofia, Steven R. Wilson, Holger Jakob, Stefan Teufel, Zaheer Ali, Jeffrey Van Cleve, Brian Eney, Greg Perryman

STAR Program Research Presentations

SOFIA is an infrared observatory mounted on a modified 747 engineered to do infrared astronomy at 45000 feet. The telescope equipment contains a number of sensors and stabilizers that allow the telescope to capture images while mounted in a moving plane. We have developed methods to analyze the performance of the telescope assembly that will help improve the stabilization and image capturing performance of the observatory. Here we present reusable methods to analyze telescope performance data that will enable improvements in the quality of the scientific data that is produced by the SOFIA. This poster focuses on the multi-flight performance …

Feedback Stabilization At Spear3, Daniel Kelley, Jeff Corbett

STAR Program Research Presentations

The SPEAR3 synchrotron lightsource at SLAC relies on a sophisticated radio frequency (RF) timing system to maintain current – electrons – in the storage ring. One problem SPEAR3 operators have dealt with is the thermal expansion of one of the cables supporting this RF timing system. As the cable expands and contracts with the diurnal rise and fall of the sun, the phase of the RF in the cable shifts. This shifting phase affects the timing accuracy of electron injections into the storage ring.

A common feedback control algorithm PID (Proportional Integral Derivative) has countless applications in engineering. PID feedback …

Extending The Shelf Life Of Solid Rocket Motors Through Mechanical Activation Of, Emilio J. Cantu, Hope Klukovich, Timothy Haddad

STAR Program Research Presentations

A great deal of interest has been given to extending the life of our fleet of solid rocket motors. Once poured, these motors are essentially stored, unused, and are therefore subject to various environmental conditions. Cycling between high and low temperatures causes thermal expansion and contraction of motor materials. This will eventually lead to cracks forming and propagating in the rocket motor, rendering it unreliable and thus must be re-poured at great expense. A common binder material used in these motors is hydroxy-terminated polybutadiene (HTPB), which when cured with a diisocyanate, creates the solid matrix to house the energetic materials …

Interleukin Expression After Injury And The Effects Of Interleukin-1 Receptor Antagonist, Connie S. Chamberlain, Ellen M. Leiferman, Kayt E. Frisch, Stacey L. Brickson, William L. Murphy, Geoffrey S. Baer

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

Ligament and tendon repair involves a complex series of coordinated events orchestrated by various cell types, cytokines and other factors. The repair process extends months to years and results in scar tissue mechanically inferior to native tissue. This is in clear contrast to tissue "regeneration" which would recapitulate the native tissue. Numerous approaches to stimulate a regenerative scenario have been attempted, including tissue-engineering, non-steroidal anti-inflammatories, ultrasonic, or electrical stimulation, but none have resulted in complete regeneration. In pursuit of a more regenerative outcome, it is important to understand the fundamentals of the normal healing process. Previous work from our lab …

Investigation Of Negative Index In Dispersive, Chiral Materials Via Contra-Propagating Velocities Under Second-Order Dispersion (Gvd), Monish Ranjan Chatterjee, Tarig A. Algadey

Electrical and Computer Engineering Faculty Publications

Negative refractive index arises typically in metamaterials via multiple routes. One such avenue is the condition where the Poynting vector of the electromagnetic wave is in opposition to the group velocity in the material. An earlier work along this route in a chiral material led to the well-known result of requiring very large (non-realizable) chirality.

Thereafter, a combination of chirality together with first-order dispersion was examined using plane wave electromagnetic analysis. To arrive at the conclusions in that approach, the three wave velocities (energy, group and phase) were derived under first-order dispersion in permittivity, permeability and chirality. Negative index in …