Engineering Commons^™

Leveraging Help Requests In Pomdp Intelligent Tutors, Jeremiah Folsom-Kovarik

Electronic Theses and Dissertations

Intelligent tutoring systems (ITSs) are computer programs that model individual learners and adapt instruction to help each learner differently. One way ITSs differ from human tutors is that few ITSs give learners a way to ask questions. When learners can ask for help, their questions have the potential to improve learning directly and also act as a new source of model data to help the ITS personalize instruction. Inquiry modeling gives ITSs the ability to answer learner questions and refine their learner models with an inexpensive new input channel. In order to support inquiry modeling, an advanced planning formalism is …

A Comprehensive Severity Analysis Of Large Vehicle Crashes, Haluk Laman

Electronic Theses and Dissertations

The goal of this thesis is to determine the contributing factors affecting severe traffic crashes (severe: incapacitating and fatal - non-severe: no injury, possible injury, and non-incapacitating), and in particular those factors influencing crashes involving large vehicles (heavy trucks, truck tractors, RVs, and buses). Florida Department of Highway Safety and Motor Vehicles (DHSMV) crash reports of 2008 have been used. The data included 352 fatalities and 9,838 injuries due to large vehicle crashes. Using the crashes involving large vehicles, a model comparison between binary logit model and a Chi-squared Automatic Interaction Detection (CHAID) decision tree model is provided. There were …

Diffusion And Reaction In Selected Uranium Alloy System, Ke Huang

Electronic Theses and Dissertations

U-Mo metallic fuels with Al alloys as the matrix/cladding are being developed as low enriched uranium fuels under the Reduced Enrichment for Research and Test Reactor (RERTR) program. Significant interactions have been observed to occur between the U-Mo fuel and the Al alloy during fuel processing and irradiation. U-Zr metallic fuels with stainless steel claddings have been developed for the generation IV sodium fast reactor (SFR). The fuel cladding chemical interaction (FCCI) induced by the interdiffusion of components was also observed. These interactions induce deleterious effects on the fuel system, such as thinning of the cladding layer, formation of phases …

Surface Measurements And Predictions Of Full-Coverage Film Cooling, Gregory Natsui

Electronic Theses and Dissertations

Full-coverage film cooling is investigated both experimentally and numerically. First, surface measurements local of adiabatic film cooling effectiveness and heat transfer augmentation for four different arrays are described. Reported next is a comparison between two very common turbulence models, Realizable k-ε and SST k-ω, and their ability to predict local film cooling effectiveness throughout a full-coverage array. The objective of the experimental study is the quantification of local heat transfer augmentation and adiabatic film cooling effectiveness for four surfaces cooled by large, both in hole count and in non-dimensional spacing, arrays of film cooling holes. The four arrays are of …

Optimization Of Ocean Thermal Energy Conversion Power Plants, Steven Emanoel Rizea

Electronic Theses and Dissertations

A proprietary Ocean Thermal Energy Conversion (OTEC) modeling tool, the Makai OTEC Thermodynamic and Economic Model (MOTEM), is leveraged to evaluate the accuracy of finite-time thermodynamic OTEC optimization methods. MOTEM is a full OTEC system simulator capable of evaluating the effects of variation in heat exchanger operating temperatures and seawater flow rates. The evaluation is based on a comparison of the net power output of an OTEC plant with a fixed configuration. Select optimization methods from the literature are shown to produce between 93% and 99% of the maximum possible amount of power, depending on the selection of heat exchanger …

Online Path Planning And Control Solution For A Coordinated Attack Of Multiple Unmanned Aerial Vehicles In A Dynamic Environment, Juan Vega-Nevarez

Electronic Theses and Dissertations

The role of the unmanned aerial vehicle (UAV) has significantly expanded in the military sector during the last decades mainly due to their cost effectiveness and their ability to eliminate the human life risk. Current UAV technology supports a variety of missions and extensive research and development is being performed to further expand its capabilities. One particular field of interest is the area of the low cost expendable UAV since its small price tag makes it an attractive solution for target suppression. A swarm of these low cost UAVs can be utilized as guided munitions or kamikaze UAVs to attack …

Action Recognition Using Particle Flow Fields, Kishore Reddy

Electronic Theses and Dissertations

In recent years, research in human action recognition has advanced on multiple fronts to address various types of actions including simple, isolated actions in staged data (e.g., KTH dataset), complex actions (e.g., Hollywood dataset), and naturally occurring actions in surveillance videos (e.g, VIRAT dataset). Several techniques including those based on gradient, flow, and interest-points, have been developed for their recognition. Most perform very well in standard action recognition datasets, but fail to produce similar results in more complex, large-scale datasets. Action recognition on large categories of unconstrained videos taken from the web is a very challenging problem compared to datasets …

Synthesis And Properties Of Self-Assembled C/Sicn Nanocomposite Derived From Polymer Precursors, Cheng Li

Electronic Theses and Dissertations

The properties of C/SiCN nanocomposites synthesized by thermal decomposition of polymer precursors were studied in this work. The novel polymer-to-ceramic process enables us to tailor the ceramic structure in atomic level by designing the starting chemicals and pyrolysis procedures. It is of both fundamental and practical significance to investigate the properties and structures relationship of the nanocomposites. In this work, we explored their application potential in using as anode of lithium-ion secondary batteries. The structure and structural evolution of C/SiCN nanocomposite were investigated by using XRD, FTIR, SEM, TEM, Solid state NMR and Raman spectroscopy. The results revealed the nanocomposites …

Bst-Inspired Smart Flexible Electronics, Ya Shen

Electronic Theses and Dissertations

The advances in modern communication systems have brought about devices with more functionality, better performance, smaller size, lighter weight and lower cost. Meanwhile, the requirement for newer devices has become more demanding than ever. Tunability and flexibility are both long-desired features. Tunable devices are ‘smart’ in the sense that they can adapt to the dynamic environment or varying user demand as well as correct the minor deviations due to manufacturing fluctuations, therefore making it possible to reduce system complexity and overall cost. It is also desired that electronics be flexible to provide conformability and portability. Previously, tunable devices on flexible …

Agglomeration, Evaporation And Morphological Changes In Droplets With Nanosilica And Nanoalumina Suspensions In An Acoustic Field, Erick Tijerino

Electronic Theses and Dissertations

Acoustic levitation permits the study of droplet dynamics without the effects of surface interactions present in other techniques such as pendant droplet methods. Despite the complexities of the interactions of the acoustic field with the suspended droplet, acoustic levitation provides distinct advantages of controlling morphology of droplets with nanosuspensions post precipitation. Droplet morphology is controlled by vaporization, deformation and agglomeration of nanoparticles, and therefore their respective timescales are important to control the final shape. The balance of forces acting on the droplet, such as the acoustic pressure and surface tension, determine the geometry of the levitated droplet. Thus, the morphology …

Design And Characterization Of High Temperature Packaging For Wide-Bandgap Semiconductor Devices, Brian Grummel

Electronic Theses and Dissertations

Advances in wide-bandgap semiconductor devices have increased the allowable operating temperature of power electronic systems. High-temperature devices can benefit applications such as renewable energy, electric vehicles, and space-based power electronics that currently require bulky cooling systems for silicon power devices. Cooling systems can typically be reduced in size or removed by adopting wide-bandgap semiconductor devices, such as silicon carbide. However, to do this, semiconductor device packaging with high reliability at high temperatures is necessary. Transient liquid phase (TLP) die-attach has shown in literature to be a promising bonding technique for this packaging need. In this work TLP has been comprehensively …

4d-Ct Lung Registration And Its Application For Lung Radiation Therapy, Yugang Min

Electronic Theses and Dissertations

Radiation therapy has been successful in treating lung cancer patients, but its efficacy is limited by the inability to account for the respiratory motion during treatment planning and radiation dose delivery. Physics-based lung deformation models facilitate the motion computation of both tumor and local lung tissue during radiation therapy. In this dissertation, a novel method is discussed to accurately register 3D lungs across the respiratory phases from 4D-CT datasets, which facilitates the estimation of the volumetric lung deformation models. This method uses multi-level and multi-resolution optical flow registration coupled with thin plate splines (TPS), to address registration issue of inconsistent …

Macroscopic Crash Analysis And Its Implications For Transportation Safety Planning, Chowdhury Kawsar Siddiqui

Electronic Theses and Dissertations

Incorporating safety into the transportation planning stage, which is often termed as transportation safety planning (TSP), relies on the vital interplay between zone characteristics and zonal traffic crashes. Although a few safety studies had made some effort towards integrating safety and planning, several unresolved problems and a complete framework of TSP are still absent in the literature. This research aims at examining the suitability of the current traffic-related zoning planning process in a new suggested planning method which incorporates safety measures. In order to accomplish this broader research goal, the study defined its research objectives in the following directions towards …

Multi-Level Safety Performance Functions For High Speed Facilities, Mohamed Ahmed

Electronic Theses and Dissertations

High speed facilities are considered the backbone of any successful transportation system; Interstates, freeways, and expressways carry the majority of daily trips on the transportation network. Although these types of roads are relatively considered the safest among other types of roads, they still experience many crashes, many of which are severe, which not only affect human lives but also can have tremendous economical and social impacts. These facts signify the necessity of enhancing the safety of these high speed facilities to ensure better and efficient operation. Safety problems could be assessed through several approaches that can help in mitigating the …

Rare Earth Oxide Coating With Controlled Chemistry Using Thermal Spray, Virendra Singh

Electronic Theses and Dissertations

Cerium oxide (Ceria) at nano scale has gained significant attention due to its numerous technological applications. Ceria in both doped and undoped forms are being explored as oxygen sensor, catalysis, protective coating against UV and corrosion, solid oxide fuel cell (SOFC) electrolyte and newly discovered antioxidant for biomedical applications. Therefore, there is an imminent need of a technology which can provide a cost effective, large scale manufacturing of nanoceria and its subsequent consolidation, specially using thermal spray. This dissertation aims to develop a scientific understanding towards the development of pure and doped ceria- based coating for a variety of technological …

Virtual Motion Camouflage Based Nonlinear Constrained Optimal Trajectory Design Method, Gareth Basset

Electronic Theses and Dissertations

Nonlinear constrained optimal trajectory control is an important and fundamental area of research that continues to advance in numerous fields. Many attempts have been made to present new methods that can solve for optimal trajectories more efficiently or to improve the overall performance of existing techniques. This research presents a recently developed bio-inspired method called the Virtual Motion Camouflage (VMC) method that offers a means of quickly finding, within a defined but varying search space, the optimal trajectory that is equal or close to the optimal solution. The research starts with the polynomial-based VMC method, which works within a search …

Tendering Procedures In Ppp: A Literature Review, Nunzia Carbonara, Louis Gunnigan, Roberta Pellegrino, Fabio Sciancalepore

Articles

Purpose – This paper aims at providing an overview about literature on tendering process in PPP, with particular regard to transportation PPP case.

Design/methodology/approach – The approach is based on the analysis of the pertinent publications on the theme.

Findings – Three main interest areas can be found in the literature: tendering procedures, evaluation methods and evaluation criteria. Social implications – Contract authorities have several tools in order to pre-qualify and select bidders and negotiate with them: they can choose the instruments which best fit to their market

Originality/value – The paper provides a complete overview on PPP tendering procedures …

Life Cycle Cost Analysis Under Ireland's Capital Works Management Framework, Dermot Kehily, Alan Hore

Conference papers

The Capital Works Management Framework (CWMF) is a structure that has been developed to deliver the Irish government’s objectives in relation to public sector construction procurement reform. This research provides practical guidance and assistance for construction cost professionals in carrying out Whole Life Cycle Cost Analysis (WLCCA) and producing Life Cycle Cost Models(LCCMs) under the CWMF. The research outlines how LCCA calculations can be carried out for cost planning purposes and recommends a standard methodology for presenting LCCMs under the CWMF. The CWMF states that Whole Life Costs (WLC) are an important consideration throughout the design process and should be …

2:1 The Paper Tube Project, Noel Brady

Articles

Review of applied technological solution to rapid building techniques using paper tube and analogous materials to create space enclosing geodesic systems.

Co-Operatives As Social Innovation – How Older Models Of Social Enterprise Are More Relevant Than Ever, Gerard Doyle

Articles

Ireland faces a number of socio-economic issues, including, an over-reliance on fossil fuels, inequality, unsustainable approaches to urban regeneration and unbalanced regional development. This chapter will demonstrate how social enterprise can lead to the implementation of socially innovative responses to addressing these issues.

Examining The Role Of The University In Creating Jobs, Mike Murphy, Michael Dyrenfurth

Articles

This paper begins by setting out the rationale for why today’s university must be involved with job creation in terms of institutional mission and global competitiveness. We present a review of recent literature, from both sides of the Atlantic, regarding universities, technology and science parks and job creation. Measuring the impact of university actions is reviewed in terms of general criteria, impact of incubators, and where jobs are being created. A case study of Silicon Valley is reviewed as well as a discussion of roles that government might play. The paper concludes with the presentation of findings from the literature …

The Challenge Of Educating Engineers For A Close, Crowded And Creative World, Ela Krawczyk, Mike Murphy

Books/Book chapters

The world that is emerging based on the development and everyday use of new technologies is a world that can be described as close, crowded and creative. Studies have highlighted that traditional curricula and pedagogical methods for engineering education are deficient in terms of developing and nurturing key skills required by engineers to succeed in this world. The challenge for the engineering academic leaders of today is to begin with the end in mind: to begin with a description of the competences that the engineer of the future should have in order to succeed in their aspirations as an engineer, …

Applied Energy Systems: Hydrostatic Fluid Power Transmission And Flow In Pipes, Jim Mcgovern

Book/Book Chapters

This is an intentionally compact textbook or set of notes for a module addressing basic Fluid Mechanics for incompressible fluids within the context of Applied Energy Systems. Rather than attempting to cover Fluid Mechanics in a very broad and general way, two practical areas are selected in the use of fluids: hydrostatic power transmission systems and the flow of fluids through pipes and fittings. This allows the two areas to be presented in some detail, but also allows them to be sample application areas that would enable learners to put the principles of fluid mechanics into context, while developing their …

A Simulation Analysis Of Photovoltaic Ac Module Integrated Converters In Parallel, Under Controlled Edge Shading Conditions, Lynette O'Callaghan, Mick Mckeever, Brian Norton

Conference Papers

A DC and AC power simulation comparison of: a Photovoltaic (PV) array with a modular, parallel, AC converter configuration; and a series, string configuration with a central AC converter, is presented. The systems are simulated using a comprehensive range of edge shading scenarios and irradiance conditions. Power control and transformation circuitry must be designed for shade and module mismatch tolerance to prevent over-proportional power to shade losses, as average losses from Building Integrated PV (BIPV) systems are approximately 20 to 25%, due to shade, mismatch, differences in orientation and inclination, and temperature effects. 59.4% of the simulations showed gains in …

A Case-Crossover Study Of Laceration Injuries In Pork Processing, Lina Lander, Gary Sorock, Terry L. Stentz, Lynette Smith, Murray Mittleman, Melissa J. Perry

Department of Construction Engineering and Management: Faculty Publications

Objectives— The authors estimated the associations between transient risk factors and laceration injuries in workers at two meatpacking plants in the Midwest.

Methods— The case-crossover design was used to collect within-subject transient work task and personal-level exposure information. RRs of laceration injuries were estimated by comparing exposures during the ‘hazard’ period (just before the laceration injury) with exposures in the ‘control’ period (the previous workweek). Stratified analyses were utilized to estimate the effects of gender, ethnicity, training and the number of adjacent coworkers on each transient risk factor.

Results— The authors interviewed 295 meatpacking workers with laceration injuries (mean age …

Numerical Simulation And Experimentation Of Pulsatile Flows In Axisymmetric Arterial Models, Tadesse Gebreegziabher

Wayne State University Dissertations

ABSTRACT

NUMERICAL SIMULATION AND EXPERIMENTATION OF PULSATILE FLOWS IN AXISYMMETRIC ARTERIAL MODELS

by

TADESSE GEBREEGZIABHER

December 2011

Co-advisors: 1. Dr. Emmanuel Ayorinde 2. Dr. Trilochan Singh

Major: Mechanical Engineering

Degree: Doctor of Philosophy

The primary motivation for this dissertation is the fluid flow and structural response to unsteady blood flow in the human body. The research work is a synergistic merging of numerical simulation and experimentation. For the experiments, an all-encompassing, highly flexible experimental apparatus was designed and fabricated to facilitate a wide range of operating conditions, the range of which was chosen to accommodate mammalian cardiovascular system for both …

Reliability And Effect Of Partially Restrained Wood Shear Walls, John Joseph Gruber

Wayne State University Dissertations

ABSTRACT

RELIABILITY AND EFFECT OF PARTIALLY RESTRAINED WOOD SHEAR WALLS

by

JOHN J. GRUBER

MARCH 2012

Advisor: Dr. Gongkang Fu

Major: Civil Engineering

Degree: Doctor or Philosophy

The prescriptive design of the most widely used residential building code in the United States, the IRC, allows the use of partially restrained wood shear walls to resist wind and seismic loads. Wind load is the most common controlling lateral design load for these structures. In contrast, the complimenting building code, the IBC, requires either a restraining dead load or a mechanical hold down device to resist overturning. To prescribe a safe structure, …

Investigation And Improvment Of Noise, Vibration And Harshness(Nvh) Properties Of Automotive Panels, Mohammad Al Zubi

Wayne State University Dissertations

ABSTRACT

INVESTIGATION AND IMPROVEMENT OF NOISE, VIBRATION AND HARSHNESS (NVH) PROPERTIES OF AUTOMOTIVE PANELS

by

MOHAMMAD AL-ZUBI

July 2012

Advisor: Dr. Emmanuel Ayorinde

Major: Mechanical Engineering

Degree: Doctor of Philosophy

The reduction of noise and vibration in and across several components and modules of the automotive, such as the panels, doors, engine covers, seats, and others, is of primary importance. The NVH performance may be a crucial factor in the purchase decisions of numerous buyers. This work investigates through experimental, analytical and computational methods, six groups of sample materials - fabric, foam, honeycomb, monolithic and sandwich, periodic cellular material structures …

Gapped Cantilever For The Enhancement Of Strain Sensitivity And Energy Efficiency, Qinglong Zheng

Wayne State University Dissertations

Cantilever structures have been widely used in a large variety of transducer applications. For cantilever based transducers, piezoresistive/piezoelectric mechanisms has always been a popular choice due to the advantages of being low cost, simple structure and portability. However, low sensitivity is recognized as a major disadvantage of these transducers compared with optical based measurement. In this research, a gapped cantilever structure is proposed to potentially increase the sensitivity by orders of magnitude. In order to guide the design, an advanced analytical model is developed, and the increased strain sensitivity is theoretically demonstrated. In addition, optimizations with this model interestingly reveal …

Decision Support Models For The External Variety Of Configurable Products, Erkan Isikli

Wayne State University Dissertations

The decision of what configurations of a product to offer is a difficult one for marketing and sales departments. In this study, we developed decision support models that can help decision makers when using operational models to manage external variety of configurable products. Our main objective is to reduce the number of product variants offered in a proper way so that inventory and demand models do not suffer from the curse of dimension. Due to its ability and flexibility, our framework can be employed under various marketing actions. We applied our framework to both qualitative and quantitative data.