Engineering Commons^™

Economic Prospects For Advanced Combustion Technologies Suited For Climate Change Mitigation, Craig Bryan Jacobson

All Theses and Dissertations (ETDs)

Coal is projected to remain a significant portion of the global energy portfolio in the coming century. Concerns over accelerating climate change have spurred development of technologies aimed at reducing CO2 emissions from coal-fired power plants through carbon capture and sequestration: CCS). Utilities considering expansion of baseload generation capacity face a myriad of uncertainties regarding the timing and scale of future carbon legislation. This study reports on an economic evaluation of various technologies for carbon capture, sequestration, and utilization.

Cmos Characterization, Modeling, And Circuit Design In The Presence Of Random Local Variation, Benjamin A. Millemon Sr.

Boise State University Theses and Dissertations

Random local variation in CMOS transistors complicates characterization procedures, modeling efforts, simulation tools, and circuit design methodologies in highly scaled CMOS devices. Mismatch is not only a concern for closely matched device pairs in analog circuits; digital circuit designers also have to consider the effects of random variation. Device characterization, modeling, process development, and circuit design engineers have to work together to mitigate the impact of random local variation. This thesis outlines the primary challenges of CMOS characterization, modeling, and circuit design in the presence of random local variation and offers guidelines and solutions to help mitigate and model the …

Gpu-Accelerated Modeling Of Microscale Atmospheric Flows Over Complex Terrain, Anthony Rey Deleon

Boise State University Theses and Dissertations

With installed wind power capacities steadily on the rise, balancing the loads on electrical grids is challenging due to the intermittency of the wind. Short-term wind power forecasting can be a valuable tool for better informing grid operators on the available wind power. Current short-term wind forecasting techniques typically adopt mesoscale weather forecasting models with spatial resolutions on the order of a kilometer. On relatively flat terrain, use of mesoscale models may prove effective, but application to complex terrain induces large forecasting errors. To address this issue, a baseline incompressible flow solver for GPU (graphics processing unit) clusters is extended …

Training Professionals’ Usage And Understanding Of Kirkpatrick’S Level 3 And Level 4 Evaluations, Perri Estes Kennedy

Boise State University Theses and Dissertations

Behavior-based (Level 3) and results-based (Level 4) evaluations of training interventions can provide organizations with substantive proof of the value of those interventions. Training professionals have long acknowledged the necessity of conducting such evaluations, yet Level 3 evaluations are conducted for only about half of all training interventions and Level 4 for about one-third. This research examined the frequency with which training professionals currently conduct Level 3 and Level 4 evaluations, their perceptions on the utility of Level 3 and Level 4 evaluations, and the factors that facilitate or obstruct their attempts to perform such evaluations.

The research was conducted …

Wavelets In Intelligent Transportation Systems: Data Compression And Incident Detection, Shaurya Agarwal

UNLV Theses, Dissertations, Professional Papers, and Capstones

Research show that wavelets can be used efficiently in denoising and feature extraction of a given signal. This thesis discusses about intelligent transportation systems(ITS), its requirement and benefits. We explore use of wavelets in intelligent transportation systems for knowledge discovery, compression and incident detection. In the first section of thesis, we focus on the following problems related to traffic matrix: data compression, retrieval and visualization. We propose a methodology using wavelet transform for data visualization and compression of traffic data. Aim is to research on the wavelet compression technique for the traffic data, come up with the performance of various …

Node Filtering And Face Routing For Sensor Network, Umang Amatya

UNLV Theses, Dissertations, Professional Papers, and Capstones

Greedy forward routing and face routing algorithms have been extensively used for sending messages in sensor networks. In this thesis, we consider the problem of filtering redundant nodes in a sensor network as a pre-processing step for face routing. We propose two algorithms for identifying redundant nodes. We test the performance of proposed filtering algorithms on generated networks. The prototype algorithm for testing the proposed algorithms has been implemented in the Java programming language. Experimental investigation shows that the proposed filtering algorithms are effective in removing redundant nodes without compromising the network connectivity.

Fabrication And Characterization Of Thinner Solid-State Nanopores, Denis Forbi Tita

Graduate Theses and Dissertations

Solid State nanopores that are fabricated by the ion beam sculpting process and electron beam drilling have shown great promise as a sensing device for DNA and protein molecules. Even though biological pores such as the alpha-Haemolysin have been in use for quite some time, the use of solid state Nanopores in single biomolecule detection has been on the rise since the mid 1990s. Solid State nanopores have an advantage over biological pores in that they are more robust, stable, and can be sculpted to any desired size for use in translocation experiments. One of the major challenges in Nanopore …

Ultra-Low Voltage Digital Circuits And Extreme Temperature Electronics Design, Aaron J. Arthurs

Graduate Theses and Dissertations

Certain applications require digital electronics to operate under extreme conditions e.g., large swings in ambient temperature, very low supply voltage, high radiation. Such applications include sensor networks, wearable electronics, unmanned aerial vehicles, spacecraft, and energyharvesting systems. This dissertation splits into two projects that study digital electronics supplied by ultra-low voltages and build an electronic system for extreme temperatures. The first project introduces techniques that improve circuit reliability at deep subthreshold voltages as well as determine the minimum required supply voltage. These techniques address digital electronic design at several levels: the physical process, gate design, and system architecture. This dissertation analyzes …

Delay Insensitive Ternary Logic Utilizing Cmos And Cntfet, Ravi Sankar Parameswaran Nair

Graduate Theses and Dissertations

As digital circuit design continues to evolve due to progress of semiconductor processes well into the sub 100nm range, clocked architectures face limitations in a number of cases where clockless asynchronous architectures require substantially less power, generate less noise, and produce less electromagnetic interference (EMI). This dissertation develops the Delay Insensitive Ternary Logic (DITL) asynchronous design paradigm that combines the designs aspects of similar Dual-Rail asynchronous paradigms and Boolean logic to create a single wire per bit, three voltage signaling and logic scheme.

DITL is designed at the transistor level using multi-threshold CMOS and carbon nanotube (CNT) FETs to develop …

Flexible Circuits For Aerospace Applications With Special Emphasis On Rf Connectors, Abhishek Nareshraj Singh

Graduate Theses and Dissertations

The current work focused on the study of flexible electronic circuits for use in aerospace applications with emphasis on RF Connectors. The electrical and mechanical performance of the flexible circuits was studied and compared to a standard coaxial cable for feasibility study in avionics space. Also, Anisotropic Conductive Films (ACF) are studied for connecting the flexible RF connectors and their performance studied for electrical and mechanical behavior with change in bonding parameters.

Semiconductor Nanocrystals: From Quantum Dots To Quantum Disks, Zheng Li

Graduate Theses and Dissertations

The bottom-up colloidal synthesis opened up the possibility of finely tuning and tailoring the semiconductor nanocrystals. Numerous recipes were developed for the preparation of colloidal semiconductor nanocrystals, especially the traditional quantum dots. However, due to the lack of thorough understanding to those systems, the synthesis chemistry is still on the empirical level. CdS quantum dots synthesis in non-coordinating solvent were taken as a model system to investigate its molecular mechanism and formation process, ODE was identified as the reducing agent for the preparation of CdS nanocrystals, non-injection and low-temperature synthesis methods developed. In this model system, we not only proved …

Dynamical Properties Of Ferroelectric Perovskites (Ba,Sr)Tio3 And Pb(Zr,Ti)O3 Systems From First Principles, Jeevaka Weerasinghe

Graduate Theses and Dissertations

A first-principles-based effective Hamiltonian scheme which incorporates coupling between ferroelectric (FE) and antiferrodistortive (AFD) motions is applied to Pb(Zr,Ti)O₃ alloys. It validates the existence of two modes of E symmetry (rather than the single E(1TO) soft mode) in the 50-75 cm^-1 range for temperatures smaller than 200 K and for compositions falling within the Rhombohedral R3c phase. Coupling between long-range-ordered FE and AFD motions is shown to be the cause of the additional mode and more insight into its nature is provided. This scheme is further used to reveal a field-induced anticrossing involving FE and AFD degrees of …

Characterization And Quantification Of Monomers, Oligomers, And By-Products From Xylan During Biomass Pretreatment, Ching-Shuan Lau

Graduate Theses and Dissertations

Biomass pretreatment generates inhibitory products, which reduce the overall yield of xylose for ethanol production. Understanding of hemicellulose depolymerization into xylose is essential to identify the pretreatment conditions that maximize xylose formation, but minimize the generation of these inhibitory products, such as formic acid and furfural. Thus, the goal of this project is to understand how dilute acid pretreatment parameters affect hemicellulose depolymerization, maximize xylose concentrations, and minimize by-products formation.

To progress towards this goal, rates and mechanisms of hemicellulose release must be determined. Birchwood xylan was used as the starting material to produce xylose oligomers. The hydrolyzed birchwood xylan …

Plasmonic Pervaporation Via Gold Nanoparticle-Functionalized Nanocomposite Membranes, Aaron Russell

Graduate Theses and Dissertations

Butanol derived from biological feedstocks has significant potential as a liquid fuel source, but the separation methods used in its production can be prohibitively expensive and are therefore currently the subject of extensive research. Pervaporation is a promising membrane process that is effective in butanol separations, but involves a large energy demand. This study examines the possibility of increasing flux and energy efficiency in pervaporation via plasmonic heating of gold nanoparticle-functionalized, polymer nanocomposite membranes (AuNCMs) in lieu of conventional feed heating. An economic analysis demonstrated that plasmonic pervaporation could achieve significant reductions in energy usage and utility cost in butanol …

Optimization Of A Dynamic Hot Water Pretreatment Of Switchgrass Using Catalysis By Carbonation To Maximize Carbochemical Yields, Rohit Tanaji Dhamdere

Graduate Theses and Dissertations

A bio-refinery is a facility that converts renewable bio-resources into value-added chemicals and products. In this context of a bio-refinery, the production of the carbochemicals such as HMF, furfural and organic acids illustrate that multiple products can be produced from a renewable source such as lignocellulosic biomass (switchgrass). Traditionally, carbochemicals such as furfural and HMF are produced using inorganic acids such as H2SO4, HCL, and H3PO4. The use of such acids requires the application of high cost materials of construction such as Hastelloy-C, titanium etc.

The objective of this study is to develop a semi-continuous process for the conversion of …

Districting And Dispatching Policies To Improve The Efficiency Of Emergency Medical Service (Ems) Systems, Damitha Bandara

All Dissertations

The major focus of Emergency Medical Service (EMS) systems is to save lives and to minimize the
effects of emergency health incidents. The efficiency of the EMS systems is a major public concern. Thus,
over the past three decades a significant amount of research studies have been conducted to improve the performance
of EMS systems. The purpose of this study is also to improve the performance of EMS system.
The contribution of this research towards improving the performance of EMS systems is twofold. One area
is to implement optimal or near optimal dispatching strategies for EMS systems and the other …

Inkjet Printability Of Electronic Materials Important To The Manufacture Of Fully Printed Otfts, Sooman Lim

Dissertations

In this study, the inkjet printability of materials important to fabricating OTFTs was researched. In order to understand the jetting evolution of inkjet printed inks, simulations were performed with a nano copper and nano particle silver ink. To predict the inkjettability of the nano copper ink, Z and Oh numbers at different temperatures were determined. The results from the simulation studies were compared to experimental results obtained using a Dimatix inkjet printer. For the semiconductor ink, the inkjet printability of two organic semiconductors, P2TDC17FT4 (poly[(3,7-diheptadecylthieno[3,2-b]thieno[2',3':4,5]thieno[2,3-d]thiophene-2,6-diyl)[2,2'-bithiophene]-5,5'-diyl] dissolved in 1,2-dichlorobenzene and P3HT (poly-3 hexylthiophene) were compared to determine the relationship between drop …

Mathematical Model And Experimental Exploration Of The Nanoinjector Lance Array, Nathan C. Toone

Theses and Dissertations

The Nanoinjector Lance Array has been developed to inject foreign material into thousands of cells at once using electrophoresis to attract and repel particles to and from the electrically-charged lances. A mathematical computer model simulating the motion of attracted or repelled proteins informs the design of the nanoinjection lance array system. The model is validated by accurately predicting protein velocity in electrophoresis experiments. A complete analysis of parameters is conducted via simulations and specific research questions regarding the counter electrode of the nanoinjector lance array system are explored using the model. A novel technique for fabricating lance arrays from collapsed …

Processes For The Production Of Buprenorphine With Reduced Impurity Formation, Brenda E. Allen, Esa T. Jarvi, Dennis J. Kaluta, James R. Meyer, Keith Tomazi, Anthony Mannino, Brian Orr

Chemical and Biochemical Engineering Faculty Research & Creative Works

The present invention provides process for the production of opiate alkaloids. In particular, the present invention provides processes for the production of buprenorphine or a derivative of buprenorphine that minimizes the formation of impurities.

Nox Control Systems And Methods For Controlling Nox Emissions, Maruthi Devarakonda, Gordon Parker, John Johnson

Michigan Tech Patents

An exhaust aftertreatment system comprising a selective reduction catalyst, a NO_x sensor or an NH₃ sensor, a urea injector, and a dosing control unit, wherein the dosing control unit calculates the rate of urea injection by estimating the concentrations of NO and NO₂ in the exhaust downstream of the SCR catalyst.

Design And Testing Of A Biological Microelectromechanical System For The Injection Of Thousands Of Cells Simultaneously, Gregory Herlin Teichert

Theses and Dissertations

The ability to inject DNA and other foreign particles into cells, both germ cells (e.g. to produce transgenic animals) and somatic cells (e.g. for gene therapy), is a powerful tool in genetic research. Nanoinjection is a method of DNA delivery that combines mechanical and electrical methods. It has proven to have higher cell viability than traditional microinjection, resulting in higher integration per injected embryo. The nanoinjection process can be performed on thousands of cells simultaneously using an array of microneedles that is inserted into a monolayer of cells. This thesis describes the needle array design requirements and the fabrication process …

Electrical Properties Of Dc Reactive Magnetron Sputtered Zno:Al Films From Optical Spectra, Pd Nsimama, Me Samiji

Tanzania Journal of Science

Reactive direct current (DC) sputtered ZnO:Al films were prepared using the plasma emission monitoring (PEM) system. Films were deposited using PEM setpoints ranging from 50 to 80%. Transmittance and reflectance of the films were measured by using the UV-VIS-NIR Lambda 900 double beam spectrophotometer. The sheet resistance was measured using the four-point probe. Films optical spectra were fitted with the Drude model to determine their charge carrier concentration, mobility and the alternating current (AC) resistivity. The highest values of mobility and charge carrier concentration were 8.31cm2/Vs and 2.14 x 1021cm-3 respectively. The lowest value of the AC resistivity was given …

The Effect Of A Navigational Aid On Training Of A Minimally Invasive Surgery Camera Task, Ketan Vidwans

Theses and Dissertations

Minimally Invasive Surgery (MIS) differs from Open Surgery as surgeons view the surgical site indirectly on a monitor. The view shown is typically from an angled endoscope off to one side of the surgery (i.e., uncollocated with the view of the hands). This makes camera navigation a challenging ability to learn. MIS thus requires longer training periods, more practice and mental effort to achieve proficiency. Current training setups and Operating Room (OR) environments lack appropriate real-time visual cues for navigation and other perception related information that could help with learning and performance in the OR. The purpose of this research …

Highly Sensitive X-Ray Detectors In The Low-Energy Range On N-Type 4h-Sic Epitaxial Layers, K. C. Mandal, P. G. Muzykov, J. R. Terry

Faculty Publications

No abstract provided.

Simulation Of Tax Revenues From Individuals Receiving Advanced College Degrees, Dejing Kong

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

State governments always want graduates who received higher education in universities and colleges to stimulate the economic growth of the state. Many state universities want to contribute more to the state’s economy as well, and state universities frequently have relevant economic development activities and offices. The state universities normally receive annual budgeted financial support and occasional special funding from the state government while the state expects contributions to the economic growth and an educated citizen in return. In this research, the economic impact of a graduate degree funded by the state government was considered in the state of Nebraska.

Simulation …

Hydrologic Evaluation Of Established Rain Gardens In Lincoln, Nebraska, Andrew R. Anderson, Thomas G. Franti, David P. Shelton

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Increased urbanization has resulted in water quality and flooding problems for many receiving waters in the United States. Rain gardens are one type of best management practice commonly used in low impact development (LID). Many studies have evaluated large engineered bioretention cells in research settings. There is little information on the effectiveness of homeowner-maintained rain gardens that rely on deep percolation as the method for water exfiltration. Repeatable controlled experiments are very rare in hydrologic studies due to the inherent variability of weather data. The objective of this study was to evaluate the hydrologic properties of twelve established rain gardens …

Use Of Building Information Modelling In Responding To Low Carbon Construction Innovations: An Irish Perspective., Barry Mcauley, Alan V. Hore, Roger West

Conference papers

At present the Irish construction industry is facing one of its most uncertain and challenging periods and will see major cuts in all areas of the economy in 2012. Despite this, Ireland pushes forward in sustainability initiatives with the Government ruling that environmentally-friendly policies are to get priority in competing for State contracts worth up to €16 billion a year. This and further initiatives are in place, so as to reduce greenhouse gas emissions by up to 20% by the year 2020.By the end of 2018 the public sector must own or rent only buildings with high energy-saving standards and …

Nanoscale Contacts Between Semiconducting Nanowires And Metallic Graphenes, Seongmin Kim, David B. Janes, Sung-Yool Choi, Sanghyun Ju

Birck and NCN Publications

Metal–semiconductor (M–S) junctions are important components in many semiconductor devices, and there is growing interest in realizing high quality M–S contacts that are optically transparent. In this paper, we present our investigations into the characteristics of M–S junction in a semiconducting ZnO nanowire that was directly grown on a multilayer graphene film (MGF). The synthesized nanowires were fabricated into two-terminal devices with MGF as one contact and Al as the other contact. By comparison with devices employing Al contacts at both ends, the nanowire resistivity and specific contact resistivity of the MGF–nanowire contact can be extracted. The extracted specific contact …

Data Mining Of Protein Databases, Christopher Assi

School of Computing: Dissertations, Theses, and Student Research

Data mining of protein databases poses special challenges because many protein databases are non-relational whereas most data mining and machine learning algorithms assume the input data to be a relational database. Protein databases are non-relational mainly because they often contain set data types. We developed new data mining algorithms that can restructure non-relational protein databases so that they become relational and amenable for various data mining and machine learning tools. We applied the new restructuring algorithms to a pancreatic protein database. After the restructuring, we also applied two classification methods, such as decision tree and SVM classifiers and compared their …

Parameterized Model Order Reduction Of Delayed Systems Using An Interpolation Approach With Amplitude And Frequency Scaling Coefficients, F. Ferranti, M. Nakhla, G. Antonini, T. Dhaene, L. Knockaert, Albert E. Ruehli

Electrical and Computer Engineering Faculty Research & Creative Works

When the geometric dimensions become electrically large or signal waveform rise times decrease, time delays must be included in the modeling. We present an innovative PMOR technique for neutral delayed differential systems, which is based on an efficient and reliable combination of univariate model order reduction methods, amplitude and frequency scaling coefficients and positive interpolation schemes. It is able to provide parameterized reduced order models passive by construction over the design space of interest. Pertinent numerical examples validate the proposed PMOR approach. © 2012 IEEE.