Engineering Commons^™

Synthesis Of Surface Composites Using Friction Stir Processing, Bharat Gattu

Masters Theses

"Composite materials have an edge over monolithic materials due to higher strength/stiffness - to - density ratios, improved fatigue and wear resistance and better high temperature properties. Surface composites provide improved tribological properties such as wear resistance, friction coefficient and corrosion resistance. Friction stir processing (FSP) which originated from friction stir welding (FSW - a method for joining aluminum alloys) is a solid state technique to modify the microstructure of the alloys. During FSP the frictional heat generated at the tool - work piece interface plasticizes the material allowing it to flow around the pin. The combined effect of the …

Development And Use Of Computer Aided Tools To Enhance Team Dynamics With Role Play Simulations, Vachaspathy Kuntamukkala

Masters Theses

"This thesis proposes a methodology for the development and use of computer based tools to enhance student team dynamics. Working effectively in groups cannot be taught in class room environment. Students often encounter conflicts during team meetings. Although some conflicts are resolved by the efforts of team members, an unbiased facilitator who is not a member of the team is often needed to help. This work proposes a tool that uses role play simulations to engage students in real-life scenarios so that they gain a practical, as well as a theoretical, understanding of how to work effectively as a team. …

Anchorage And Bond Characteristics Of Externally Bonded Frp Laminates Used For Shear Strengthening Of Rc And Pc Girders, Carlos Andres Ortega Ordonez

Masters Theses

"In the last three decades, the use of fiber reinforced polymer (FRP) materials to strengthen structures externally has emerged as one of the most promising technologies in materials and structural engineering, and these materials have been gaining popularity in the civil engineering community. Externally bonded FRP sheets and laminates have been used successfully to increase flexural and shear capacity. The overall performance of the strengthened system depends heavily on the quality of the bond between the concrete and the FRP laminate. Low bond strength can cause delamination at the fiber-matrix interface and at the FRP laminate-concrete interface. As a result, …

In-Plane Behavior Of Strengthened Unreinforced Masonry Infill Walls With Alternative Wood-Fiber Fly Ash Material, Yosuke Tanizawa

Masters Theses

"This research investigates the potential for an alternative masonry product to use in masonry infill wall systems. The study also investigates the effects of an external fiber reinforced polymer (FRP) strengthening system on in-plane behavior of the alternative unreinforced masonry (URM) walls. The alternative masonry product is produced in a solid unit configuration and utilizes recycled white oak wood-fibers and an ASTM Class-C fly ash as its raw materials. The external strengthening system investigated consists of an elastomeric polyurea surface coating with and without integrated discrete chopped E-glass fibers which is directly sprayed on the URM wall surfaces. The alternative …

The Effects Of Water To Fuel Ratio On The Kinetics Of Supercritical Water Reformation Of Jet Fuel, Satya Putta

Masters Theses

"The noncatalytic direct reformation of jet fuel was studied in a supercritical water medium using a specially designed 400-mL Haynes® 230 alloy tubular reactor. The experiments were conducted at 1042±5 K, 240.9±0.1 bar, and at water flow rates of 7.5, 15, 30 g/min with varying water-to-fuel feed ratios of 7.5, 15 and 30. The principal reactions are direct reformation of jet fuel into hydrogen and carbon oxides and pyrolysis of jet fuel into lighter hydrocarbons and coke. The effluent gas contained H₂, CO, CO₂ and CH₄, with smaller concentrations of C₂H₄ and C₂H₆. This thesis discusses the effects of the …

The Development And Application Of The Complete Time-Domain Trl Calibration Technique, Hongxia Ning

Masters Theses

"The first paper in the thesis discussed the development of a complete time-domain THRU-REFLECT-LINE (t-TRL) calibration technique. To validate the error correction technique, two stripline TRL test fixtures are designed and measured by two TDR instruments respectively. The t-TRL calibration is implemented to the recorded TDR/TDT waveforms and the comparison of the magnitude and phase results of S-parameters obtained by t-TRL and VNA TRL shows excellent agreement up to 25GHz.

In the second paper, the application of t-TRL calibration technique to the Root Impulse Energy (RIE) loss calculation is discussed. The RIE loss is theoretically derived for the matched network …

Investigation Of Selective Laser Sintering Of Zirconium Diboride Parts, Shashwatashish Pattnaik

Masters Theses

"This research investigates the fabrication of three-dimensional parts from ZrB₂, an ultra high temperature ceramic (UHTC), using the selective laser sintering (SLS) process. Based on an experimental investigation, optimum values for the SLS parameters (scan speed, laser power, energy density, scan spacing and layer thickness), used on a DTM Sinterstation 2000, were determined to build green ZrB₂ parts with high integrity and sharp geometrical features. This was done by melting the polymer binder used to bond the ceramic particles layer-by-layer according to the cross-section of a CAD model. The use of a sacrificial plate to eliminate cracks in the bottom …

An Evolutionary Algorithm Approach To Actuated Signal Timing Optimization Under Lane-By-Lane Detection Condition, Eric G. Strack

Masters Theses

"Motivated by the need to reduce congestion on the nation's roadway network, this research seeks to determine when a new detection scheme at actuated signalized intersections may help. This new detection scheme is called lane-by-lane detection. It "looks" at traffic in all lanes individually to determine the traffic volume on the roadway. Specifically, the problems addressed are investigating alternate signal timings and investigating the traffic volume's effect on performance of the detection scheme. For the alternate signal timings, an Evolutionary Algorithm (EA) was employed to identify the optimal signal timing. This algorithm creates signal timings and tests them in the …

Het-Cam For The Identification Of Ocular Irritancy In Seawater/Salt Water Sources, Alexander Clovis Winters

Masters Theses

"The Hens Egg Test on the Chorionallantoic Membrane (HET-CAM) is an ocular irritation test proposed to replace tradition ocular investigations such as the Draize eye test that has been criticized because of its use of animals. In this study, the ocular irritation potential of seawater and saltwater sources dosed with different disinfectants has been evaluated using the HET-CAM. The seawater and salt water tested was taken from the main show pools from three aquatic theme parks (San Diego, San Antonio, and Orlando). The three disinfectants considered were sodium hypochlorite (NaOCl), calcium hypochlorite (Ca(OCl)₂), and ozone (O₃).

Three different HET-CAM methods …

Synthesis Of Best Practices In Transportation Security, Volume I: Vulnerability Assessment, Haritha Reddy Venna, Jon D. Fricker

JTRP Technical Reports

Part I of the research focused on developing a methodology to identify and evaluate the most critical and vulnerable INDOT assets. This method aims at obtaining an index that reflects the vulnerability and criticality of an asset on the basis of multiple performance criteria. This methodology was tested on the seven INDOT districts. Because not all the factors that influence the vulnerability do have same weight, the analytical hierarchical process is used to obtain the weights for the criteria. Countermeasures are suggested as a part of the research to reduce the vulnerability of a given asset based on its relevant …

Mechanistic Evaluation Of Rubblized Pcc Pavements, Yigong Ji

JTRP Technical Reports

This report presents a mechanistic approach and procedures for determining layer coefficients to characterize the in-situ behaviors of rubblized pavements. This procedure was developed based on the 1993 AASHTO Pavement Design Guide utilizing Falling Weight Deflectometer (FWD) testing and in-place simulation using back-calculation layer modulus. In order to evaluate the rubblized pavement systematically, twelve constructed pavement sections were extensively tested by FWD annually after construction. The FWD data was processed using the proposed mechanistic procedure. In addition, statistical analysis was conducted to compare the pavement structure parameters each year, including layer coefficient and in-situ resilient modulus using Analysis of Variance …

Deflection Of A Viscoelastic Cantilever Under A Uniform Surface Stress: Applications To Static-Mode Microcantilever Sensors Undergoing Adsorption, Michael J. Wenzel, Fabien Josse, Stephen M. Heinrich

Civil and Environmental Engineering Faculty Research and Publications

The equation governing the curvature of a viscoelastic microcantilever beam loaded with a uniform surface stress is derived. The present model is applicable to static-mode microcantilever sensors made with a rigid polymer, such as SU-8. An analytical solution to the differential equation governing the curvature is given for a specific surface stress representing adsorption of analyte onto the viscoelastic beam’s surface. The solution for the bending of the microcantilever shows that, in many cases, the use of Stoney’s equation to analyze stress-induced deflection of viscoelastic microcantilevers (in the present case due to surface analyte adsorption) can lead to poor predictions …

Self-Reported Cyber Crime: An Analysis On The Effects Of Anonymity And Pre-Employment Integrity, Ibrahim Baggili, Marcus Rogers

Electrical & Computer Engineering and Computer Science Faculty Publications

A key issue facing today’s society is the increase in cyber crimes. Cyber crimes pose threats to nations, organizations and individuals across the globe. Much of the research in cyber crime has risen from computer science-centric programs, and little experimental research has been performed on the psychology of cyber crime. This has caused a knowledge gap in the study of cyber crime. To this end, this research focuses on understanding psychological concepts related to cyber crime. Through an experimental design, participants were randomly assigned to three groups with varying degrees of anonymity. After each treatment, participants were asked to self-report …

Abnormal Collateral Artery Vasoactivity Following Chronic Ischemia, Trevor Cardinal, Thomas J. Kesler, Matthew D. Yocum

Biomedical Engineering

No abstract provided.

A Numerical Approach To Determine The Impact Of Network Remodeling On Blood Flow, Trevor Cardinal, Shilpi Ghosh, Stephanie A. Wood, Gabriel Gruionu

Biomedical Engineering

No abstract provided.

Alterations In Femoral Strain Following Hip Resurfacing And Total Hip Replacement, C. R. Deuel, A. A. Jamali, S. M. Stover, S J. Hazelwood

Biomedical Engineering

Bone surface strains were measured in cadaver femora during loading prior to and after resurfacing of the hip and total hip replacement using an uncemented, tapered femoral component. In vitro loading simulated the single-leg stance phase during walking. Strains were measured on the medial and the lateral sides of the proximal aspect and the middiaphysis of the femur. Bone surface strains following femoral resurfacing were similar to those in the native femur, except for proximal shear strains, which were significantly less than those in the native femur. Proximomedial strains following total hip replacement were significantly less than those in the …

Cross-Disciplinary Approaches For Developing Serious Games In Higher Education: Frameworks For Food Safety And Environmental Health Education, Pauline Rooney, K.C. O'Rourke, Greg Burke, Brian Mac Namee, Claudia Igbrude

Conference papers

While some educators have adopted commercial off the-shelf games for use in the classroom, such games may not always meet the individual requirements of lecturers whose courses are tied to specific learning utcomes. An alternative is to capitalise on in-house expertise in Higher Education and create serious games through cross-disciplinary team projects. This paper outlines such a project within one Higher Education institution. It describes synergies created across disciplines as a result of the collaboration on game design and implementation. It looks at tensions generated between the pedagogical requirements (of lecturers), entertainment objectives (of games designers) and technical excellence (sought …

Compensating For Expressiveness In Queries To A Content Based Music Information Retrieval System, Bryan Duggan, Brendan O'Shea, Mikel Gainza, Padraig Cunningham

Conference papers

MATT2 is a content based music information retrieval system adapted to the characteristics of traditional Irish dance music. MATT2 compensates for expressive artefacts commonly employed by traditional musicians. Specifically these are ornamentation, "the long note", reversing and phrasing. In this paper we describe the main components of MATT2 and present an experiment where we demonstrate that using this higher level knowledge of melodic similarity in traditional Irish dance music results in a significant improvement in annotation accuracy over standard approaches from the MIR literature.

Error Metrics For Impaired Auditory Nerve Responses Of Different Phoneme Groups, Andrew Hines, Naomi Harte

Conference papers

An auditory nerve model allows faster investigation of new signal processing algorithms for hearing aids. This paper presents a study of the degradation of auditory nerve (AN) responses at a phonetic level for a range of sensorineural hearing losses and flat audiograms. The AN model of Zilany & Bruce was used to compute responses to a diverse set of phoneme rich sentences from the TIMIT database. The characteristics of both the average discharge rate and spike timing of the responses are discussed. The experiments demonstrate that a mean absolute error metric provides a useful measure of average discharge rates but …

2008-2009 Che Newsletter, Department Of Chemical Engineering, Michigan Technological University

Department of Chemical Engineering Newsletters

Table of Contents

• Department
• Faculty
• Research
• Alumni & Friends
• 2008 Industrial Advisory Board
• Convocation
• Student News

Charge Induced Enhancement Of Adsorption For Hydrogen Storage Materials, Xiang Sun

Dissertations, Master's Theses and Master's Reports - Open

The rising concerns about environmental pollution and global warming have facilitated research interest in hydrogen energy as an alternative energy source. To apply hydrogen for transportations, several issues have to be solved, within which hydrogen storage is the most critical problem. Lots of materials and devices have been developed; however, none is able to meet the DOE storage target. The primary issue for hydrogen physisorption is a weak interaction between hydrogen and the surface of solid materials, resulting negligible adsorption at room temperature. To solve this issue, there is a need to increase the interaction between the hydrogen molecules and …

Development Of Room Temperature Operating Single Electron Transistor Using Fib Etching And Deposition Technology, Manoranjan Acharya

Dissertations, Master's Theses and Master's Reports - Open

The single-electron transistor (SET) is one of the best candidates for future nano electronic circuits because of its ultralow power consumption, small size and unique functionality. SET devices operate on the principle of Coulomb blockade, which is more prominent at dimensions of a few nano meters. Typically, the SET device consists of two capacitively coupled ultra-small tunnel junctions with a nano island between them. In order to observe the Coulomb blockade effects in a SET device the charging energy of the device has to be greater that the thermal energy. This condition limits the operation of most of the existing …

Development Of Specifications For The Superpave Simple Performance Tests, Shu Wei Goh

Dissertations, Master's Theses and Master's Reports - Open

This study describes the development and establishment of a proposed Simple Performance Test (SPT) specification in order to contribute to the asphalt materials technology in the state of Michigan. The properties and characteristic of materials, performance testing of specimens, and field analyses are used in developing draft SPT specifications. These advanced and more effective specifications should significantly improve the qualities of designed and constructed hot mix asphalt (HMA) leading to improvement in pavement life in Michigan. The objectives of this study include the following: 1) using the SPT, conduct a laboratory study to measure the parameters including the dynamic modulus …

Micro-Fabrication Of Bio-Mems Based Force Sensor To Measure The Force Response Of Living Cells, Varun Gouthaman

Dissertations, Master's Theses and Master's Reports - Open

Understanding how a living cell behaves has become a very important topic in today’s research field. Hence, different sensors and testing devices have been designed to test the mechanical properties of these living cells. This thesis presents a method of micro-fabricating a bio-MEMS based force sensor which is used to measure the force response of living cells. Initially, the basic concepts of MEMS have been discussed and the different micro-fabrication techniques used to manufacture various MEMS devices have been described. There have been many MEMS based devices manufactured and employed for testing many nano-materials and bio-materials. Each of the MEMS …

Hall-Effect Thruster-Cathode Coupling : The Effect Of Cathode Position And Magnetic Field Topology, Jason D. Sommerville

Dissertations, Master's Theses and Master's Reports - Open

Hall-effect thruster (HET) cathodes are responsible for the generation of the free electrons necessary to initiate and sustain the main plasma discharge and to neutralize the ion beam. The position of the cathode relative to the thruster strongly affects the efficiency of thrust generation. However, the mechanisms by which the position affects the efficiency are not well understood. This dissertation explores the effect of cathode position on HET efficiency. Magnetic field topology is shown to play an important role in the coupling between the cathode plasma and the main discharge plasma. The position of the cathode within the magnetic field …

Verification Of Nyslab A Software For The Analysis Of Jointed Pavements, Maryam Limouee

Open Access Theses & Dissertations

A significant amount of research and development has been conducted for decades to provide a tool for the design and analysis of jointed slabs on different types of foundations. ILLI-SLAB, JSLAB, EverFE and ISLAB are the most used finite element modeling (FEM) codes that have gone through several iterations of improvement. JSLAB has been maintained by the Federal Highway Administration (FHWA) and is distributed free of charge and there is significant interest in further improving the capabilities of that software package.

Researchers at the University of Texas at El Paso have been charged to implement several modifications in the latest …

Insight Into The Physics Of Rupture: Dynamic Triggering Seismicity, Hector Gonzalez-Huizar

Open Access Theses & Dissertations

Seismic waves can trigger earthquakes and tremor at large distances from the causable event. Dynamic triggering occurs when the surface waves from large earthquakes change the stresses conditions on previously overstressed faults, promoting failure. To understand the causative stresses and environments behind dynamic triggering, we model the change in the stress field that the passing of Rayleigh and Love waves cause on a fault plane of arbitrary orientation relative to the direction of propagation of the waves, and apply a Coulomb failure criterion to calculate the potential of these stress changes to trigger seismicity. We apply our model to three …

Utilizing Mixed Surfactants For Simultaneous Pore Templating And Active Site Formation In Metal Oxides, Mohammed Shahidur Rahman

University of Kentucky Doctoral Dissertations

Self-assembled nonionic alkyl glycoside surfactants are of interest for creating functional adsorption and catalytic sites at the surface of mesoporous metal oxides, but they typically impart poor long-range order when used as pore templates. Improved order and control over the functional site density may be achieved by mixing them with a cationic surfactant. To confirm this hypothesis, we investigate the lyotropic liquid crystalline (LLC) phase behavior of aqueous solutions of the functional nonionic surfactant n-dodecyl β-D-maltoside (C₁₂G₂) and cationic cetyltrimethylammonium bromide (C₁₆TAB). A ternary phase diagram of the C₁₆TAB-C₁₂G_{2 …}

Investigation Of Surface Fine Grained Laminae, Streambed, And Streambank Processes Using A Watershed Scale Hydrologic And Sediment Transport Model, Joseph Paul Russo

University of Kentucky Doctoral Dissertations

Sediment transport at the watershed scale in the Bluegrass Region of Kentucky is dominated by surface fine grained laminae, streambed, and streambank erosion; high instream sediment storage; and surface erosion processes. All these processes can be impacted by agricultural, urban, and suburban land-uses as well as hydrologic forcing. Understanding sediment transport processes at the watershed scale is a need for budgeting and controlling sediment pollution, and watershed modeling enables investigation of the cumulative effect of sediment processes and the parameters controlling these processes upon the entire sediment budget for a watershed. Sediment transport is being modeled by coupling the hydrologic …

Visualization And Characterization Of Ultrasonic Cavitating Atomizer And Other Automotive Paint Sprayers Using Infrared Thermography, Nelson Kudzo Akafuah

University of Kentucky Doctoral Dissertations

The disintegration of a liquid jet emerging from a nozzle has been under investigation for several decades. A direct consequence of the liquid jet disintegration process is droplet formation. The breakup of a liquid jet into discrete droplets can be brought about by the use of a diverse forcing mechanism. Cavitation has been thought to assist the atomization process. Previous experimental studies, however, have dealt with cavitation as a secondary phenomenon assisting the primary atomization mechanism. In this dissertation, the role of the energy created by the collapse of cavitation bubbles, together with the liquid pressure perturbation is explicitly configured …