Engineering Commons^™

Continuous Control Of Lunar Orbits Via Electric Propulsion, Sunil Aggarwal

Masters Theses

"To find definite answers for the presence of water on the poles of Moon, to facilitate selection of future lunar landing sites and aid in construction of architectural bases, to assist proper lunar resource utilization and to improve lunar gravity models there is a great interest and need for highly accurate, reliable and efficient lunar surface mapping and communication. This thesis is intended to aid in proper selection of orbits for future lunar missions by demonstrating the impact of using electric propulsion on the search space of feasible and useful lunar orbits. The requirements for future lunar mapping and communication …

Verifying Module Heuristics For Large Scale Products, Rachel Marie Day

Masters Theses

"Decreasing time and costs is a major objective in many businesses today. Including modularity in the early design phases can effectively decrease time spent on and costs associated with a project. The task of identifying modules within a product early in the design process (when decisions are less expensive) is made less daunting by using the techniques of functional modeling and module heuristics. The two papers that form this thesis discuss the results of the efforts to verify the module heuristics on large products. Observations on needed modifications to the functional modeling technique and original module heuristics are reported along …

Modeling And Simulation Of Electrochemical Magneto Hydro Dynamics, Debamoy Sen

Masters Theses

"This thesis focuses on how the electrochemical magneto hydro dynamic problem is solved through numerical simulation for a two dimensional millielectrode electrochemical cell and a three dimensional microelectrode array cell. Electrochemical processes are enhanced by magnetic fields through the introduction of body forces such as Lorentz force. Through modeling and numerical simulations, experimental results can be integrated with theory. Such simulations will aid in the prediction of mass transfer limited currents and visualization of flow profiles in an electrochemical cell. The numerical solution of the equation system is made possible by the finite volume method used in the FLUENT Computational …

Development Of A One Dimensional Subsurface Contaminant Transport Model With Stochastic Applications, Benjamin Waldon Johnson

Masters Theses

"Contaminant source release history is a necessary element of contaminant mass transport simulation in the saturated zone. The source release history is unknown at many sites, and many inverse models have been developed to define finite release histories. To define a likely domain of three source history parameters, a mass balancebased one dimensional approach is developed and tested by discretizing the spatial domain into bands. By incorporating the approach in a spreadsheet model, observed data is represented by both variable length and constant length bands of analysis. Each representation of observed data was tested to determine the most appropriate band …

On-Line Depth Measurement Of Micro-Scale Laser Drilled Holes, Rock Allen Powell

Masters Theses

"A micron-precision micro-hole depth detection scheme has been developed which utilizes a confocal structure and a photomultiplier tube as a photodetector. This scheme is experimentally confirmed to posses an accuracy of greater than 95% for micro-holes on the order of one-hundred microns in diameter and tens of microns in depth and could be easily be integrated for the control of industrial and research oriented laser micro-machining process"--Abstract, page iii.

On The Effects Of Small-Scale Fading And Mobility In Mobile Wireless Communication Network, Bandana Paudel

Masters Theses

"In this study, a comprehensive analysis of the impact of mobility on end-to-end performance measures of Mobile Ad Hoc Network is performed by using small-scale fading models. Network simulation is performed in order to study a wide range of phenomena occurring during MANET communication. The effectiveness of three reactive routing protocols against different level of mobility is observed under varying network parameter like the network size, number of nodes and network connectivity. The study reveals that the network sparseness or density favors one or the other routing mechanism under varying mobility. Outcome of the simulation also provides a great deal …

Localization Of Nodes In Wired And Wireless Networks, Hindu Kothapalli

Masters Theses

"This thesis focuses on the implementation of algorithms for localization of nodes in wired and wireless networks. The thesis is organized into two papers. The first paper presents the localization algorithms based on time of arrival (TOA) and time difference of arrival (TDOA) techniques for computer networks such as the Internet by using round-trip-time (RTT) measurements obtained from known positions of the gateway nodes. The RTT values provide an approximate measure of distance between the gateway nodes and an unknown node. The least squares technique is then used to obtain an estimated position of the unknown node. The second paper …

Development And Evaluation Of An Effective Process For The Recovery Of Oil And Detoxification Of Meal From Jatropha Curcas, Sarthak Gaur

Masters Theses

"There has been significant research on biofuels to ensure national security and economic stability of the US. Jatropha curcas, a hardy plant, holds tremendous potential as a biodiesel source and cattle feed-stock largely due to its high triglyceride and crude protein content. However, its viable economic utilization is limited due to the presence of important toxic compounds, phorbol esters. A novel and efficient process has been developed that obtains high yields of jatropha oil and detoxifies the defatted (oil free) jatropha meal. Principles of solid-liquid extraction were utilized to detoxify the meal and then liquid chromatography was employed to analyze …

Modeling Of Vias And Via Arrays In High Speed Printed Circuit Boards, Arun Reddy Chada

Masters Theses

"This thesis presents modeling approaches for fast calculation of signals in dense via arrays in high speed printed circuit boards (PCBs) and model to hardware correlation study of solid and perforated disk resonators. A 2D finite difference (FD) method to extract the via capacitance which includes the via pad capacitance obtained by solving the laplace equation in the via domain in multi-layer geometries is presented and validated with analytical formulation for via capacitance. Next, closed-form expression for the impedance of an infinitely large parallel plane pair is derived and validated by comparing with cavity model for several numerical examples. The …

Preventing Chemical Product Failure, Kenneth Ombete

Masters Theses

"The purpose of this thesis is to demonstrate a research methodology to prevent chemical product failures. This methodology extends the risk in early design (RED) method for prevention of failure in electromechanical products to include products with chemical subsystems. Inclusion of this domain is demanded by the ever-growing semiconductor and energy industries. The RED method was extended by first identifying principal chemical failure modes and adding them to the failure mode taxonomy. The RED database was then augmented with historical failures of products that included chemical subsystems. Finally, the extension was validated with a case study of a fuel cell"--Abstract, …

Stressed-Eye Analysis And Jitter Separation For High-Speed Serial Links, Nitin Radhakrishnan

Masters Theses

"As the computer and electronics industry moves towards higher data rates, the most important concern in the field of signal integrity is jitter. A data communication link path often consists of a transmitter, a channel, and a receiver. Many mechanisms can contribute to jitter, a timing uncertainty in the received signal. For example, transmitters have intrinsic noise sources that contribute to random jitter and to certain types of deterministic jitter. In addition, external coupling may cause periodic jitter. The bandwidth limitation of the channel also contributes to a fourth type of jitter, inter-symbol interference. This thesis studies the various components …

Control Aspects Of A Double-Input Buckboost Power Electronic Converter, Deepak Somayajula

Masters Theses

"Systems in which two or more energy sources combine to supply power to a common load are called hybrid energy systems. Applications of these systems have grown due to their flexibility and reliability. Hybrid energy systems have been successfully implemented in hybrid electric vehicles and wind-solar systems where two or more energy sources share the same load. Double-input (DI) dc-dc power electronic converters (DIPECs) have been gaining popularity in hybrid energy systems due to their reduced component count and control simplicity. In addition, employing DIPECs increases the reliability, stability, and flexibility of the system. In this thesis, a small-signal model …

Numerical Modeling And Analysis Of Complex Electromagnetic Structures, Including Those Containing Ferrites, Andrea Orlando

Masters Theses

"Application of fast switching amplifiers in power converters, and especially in power inverters, causes unwanted radiated emission, which is a consequence of common mode (CM) currents arising in feed wire bundles. Ferrite chokes are commonly used to suppress those CM currents by increasing the CM impedance of circuits without affecting the differential mode currents, which is important for undisturbed operation of the converters or inverters. Their effective impedance is the main design concern, and it is determined by the material intrinsic properties (permeability, permittivity) and geometry. The goal of this work is to analytically correlate the geometrical and material properties …

Reliability-Based Design With System Reliability And Design Improvement, Gagandeep Singh Saini

Masters Theses

"This thesis focuses on developing a methodology for accurately estimating series system probability of failure. Existing methods for series system based design optimization are not that accurate because they assign reliability to each failure mode; as a result complete system reliability goes down. According to method proposed in this work, the user will assign required system reliability at the start and then optimizer will apportion reliability to every failure mode in order to meet required system reliability level. Detlevson second order upper bounds are used to estimate system probability of failure. Several examples have been shown to verify the results …

Screw Connections Subject To Tension Pull-Out And Shear Forces, Ryan M. Francka

Masters Theses

"Currently, the behavior of screw connections subject to combined tension pull-out and shear forces is not well understood. An experimental study was conducted at Missouri University of Science and Technology to better understand the relationship or interaction between these forces. The test program evaluated four parameters that may influence the behavior of pure tension and pure shear in screw connections: the thickness of the sheet not in contact with the screw head, the ultimate strength of the steel, the ductility of the steel, and the screw diameter. This investigation extends the application of the pure pull-out and pure shear equations …

Fault Detection And Prediction With Application To Rotating Machinery, Gary R. Halligan

Masters Theses

"In this thesis, the detection and prediction of faults in rotating machinery is undertaken and presented in two papers. In the first paper, Principal Component Analysis (PCA), a well known data-driven dimension reduction technique, is applied to data for normal operation and four fault conditions from a one-half horsepower centrifugal water pump. Fault isolation in this scheme is done by observing the location of the data points in the Principal Component domain, and the time to failure (TTF) is calculated by applying statistical regression on the resulting PC scores. The application of the proposed scheme demonstrated that PCA was able …

Analogy Based Modeling Of Natural Convection, Vaibhav Khane

Masters Theses

"This research is an extension of previous work on the development of an integrator or resistance-capacitance circuit analogy for natural convection. As a part of a larger project to enhance transport phenomenon on a micro-scale using radiation, this work studied the phenomenon of natural convection. Using experimental techniques and numerical simulations (FLUENT code), it investigated the transient response of a natural convection system. It proposes an integrator circuit analogy for a natural convection system. Experimental investigation with three different fluids indicated that the characteristic time constant of the system is related to the Prandtl number of the fluid. The project …

Comparison Of In-Planta Sampling Methods For Delineating Groundwater Contaminants, Kendra Marie Waltermire

Masters Theses

"Plants directly interact with surrounding water, air, and soil, collecting and storing chemicals and elements from the surrounding environment. Two new and innovative sampling methods have been developed in which this valuable data can be accessed to replace as well as supplement contaminated-site investigations. When determining the extent of the plume on a contaminated site, groundwater sampling may be limited due to time, site access, and expense. Using new techniques that place sampling devices in trees on site, we can sample trees naturally occurring on a contaminated site or those planted in phytoremediation or redevelopment efforts. Using these sampling devices, …

Development Of Extrusion On Demand For Ceramic Freeze-Form Extrusion Fabrication Processes, Parimal Sanjay Kulkarni

Masters Theses

"Freeze-form Extrusion Fabrication (FEF) is a Solid Freeform Fabrication method. It involves the deposition of a ceramic paste in a layer by layer manner to construct a three dimensional structure. The ceramic paste used in this process consists of a high solids loading of ceramic powder mixed with water and a nominal amount of an aqueous organic binder. These characteristics make the process environmentally friendly. Also the absence of dies or molds in the process makes it suitable for fabrication of materials like ceramics. In the past, parts have been fabricated with continuous extrusion of a ceramic paste. In FEF, …

Inductance Modeling And Extraction In Emc Applications, Clint Matthew Patton

Masters Theses

"Inductance has become a challenging problem for EMC engineers in many applications. Regardless of the application at hand, the first step remains the same; return to the physics and trace the current paths. IGBTs have become an important part in the design of power electronics because of their ability to switch fast and with stand high currents. Modules used for three phase motor drives often create problems when neglected parasitic components show themselves and interfere with the performance of the desired operation of a system. Many manufactures of these modules do not give out equivalent circuit modules and therefore leave …

An Analysis Of Lessons Learned And Best Practices From Fuel Cell Applications With An Emphasis On Hydrogen Technology, Clint Alex Cottrell

Masters Theses

"In its review of the Department of Energy's Research Development and Demonstration (RD&D) plan for hydrogen, the National Academies recommended a study of lessons learned from technologies developed for stationary fuel cell power systems. Thus, the motivation for this thesis is to study and identify the lessons learned and best practices from prior stationary fuel cell power programs. To understand how to prepare for this technology, this study conducted a thorough investigation of past stationary alternative power projects to assess the opportunities for future stationary power efforts, and how this information can be used to meet objectives for future fuel …

Application Of Ground Penetrating Radar (Gpr) For Bridge Deck Condition Assessment: Using A 1.5 Ghz Ground-Coupled Antenna, Amos Wamweya

Masters Theses

"This study is a GPR-based assessment of three bridge decks, two with a hot bituminous wearing surface and one with a bare concrete slab. The primary objectives of this study were: 1) to assess the integrity of the three bridge decks using a 1.5 GHz ground-coupled GPR antenna, and 2) to evaluate the utility of the 1.5 GHz ground-coupled antenna for bridge deck investigations. Core control (chloride ion concentration data and core integrity data) and visual inspection were used as interpretive constraint. The acquired GPR data were interpreted, and two plan view maps were generated. One depicts the magnitude of …

Public-Private Partnerships In High Risk Transportation Projects, Kiran Rangarajan

Masters Theses

"This research examines Public-Private Partnerships (PPPs) between private firms and City of Chamois, Missouri to establish a ferry boat service across the Missouri River. The study illustrates the role of PPPs in managing high risk transportation projects for rural economic development. The research study was designed to accomplish three objectives. First, understand and study the high risk transportation industry which included analyzing other ferry services in and around the region, and identifying potential risks involved in a ferry boat project. Second, study various models of PPPs, identify the attributes of each model and select appropriate models based on local and …

Investment Shell Cracking, Edward A. Druschitz

Masters Theses

"Shell cracking is the single greatest problem affecting investment casters. A clearer understanding of the factors affecting the melt profile of the wax can be gained using computational fluid dynamics (CFD) to model the interaction among 1) the thermal conductivity of the wax, 2) the thermal conductivity of the shell, and 3) the temperature of the autoclave during the autoclave de-waxing cycle. The most favorable melt profile results from a high autoclave temperature (438⁰K to 458⁰K) and saturated thermal conductivity of the shell (1.36 to 1.40 Wm⁻¹k⁻¹) in conjunction with a low wax thermal conductivity (0.33 Wm⁻¹k⁻¹). These parameters reduce …

Project Collaboration In A Distributed Environment, Shriroopa Prabhakar Deshpande

Masters Theses

"This thesis investigates methods of managing projects in an environment where project team members are in different locations. Today, large scale projects undertaken by firms that have a global presence are successfully developed across time, distance, and geographic boundaries. In order to survive in this environment, firms face many project challenges, including diverse employees, various work practices, and communication issues. Many communication issues can be minimized by the proper use of collaborative tools as well as by sharing expertise, coordinating activities, and managing relationships. Web-enabled project management tools have enhanced efforts to increase the quality, competitiveness, and profitability of these …

Emi Chip-To-Tem Cell Coupling For A Microcontroller And Emi Coupling Resulting From Via Transition And Reference Plane Change, Hemant Bishnoi

Masters Theses

"The work presented in this thesis can be broadly categorized under two main headings, estimation of electromagnetic interference (EMI) performance and characterization of EMI performance.

A numerical model of capacitive coupling between two orthogonally crossing double stripline was developed earlier by Kenji Araki and Yoshio Kami at the University of Electro-Communications, Japan. Their model was shown to be accurate up to 3GHz. A verification of their numerical model with full wave simulations is presented here.

In another work done by Shaohua Li, dynamic currents in the power pins of a microcontroller were predicted by using an IC model. The ultimate …

Adapting Management Strategies To Enter New Global Markets, Karuna Vineetha Vemulapalli

Masters Theses

"With globalization spreading its roots into every country, people from various countries are working together, and will be trying to understand the cultural differences between the organizations in different nations. Effective management of the cultural differences will be an important and competitive advantage. Keeping in mind the different perceptions of the term “Management” by varying cultures, namely United States and India, this research will be focused on understanding and managing these differences.

The proposed research will deal with concepts of cultural diversity, economic differences, intercultural and organizational differences between the two countries. Understanding why some factors like motivation, responsibility, and …

Design And Implementation Of An Asynchronous Null Convention Logic (Ncl) Fpga, Indira Priyadarshini Dugganapally

Masters Theses

"This Master’s thesis outlines the design of a completely asynchronous Field Programmable Gate Array (FPGA) for implementing NULL Convention Logic (NCL) digital circuits. The proposed design uses four Configurable Logic Blocks (CLB), each of which in turn is designed using four Logic Elements (LE) to implement NCL logic function. Each LE can be configured to function as any one of the 27 fundamental NCL gates. A Logic Element is designed by concatenating a Look-Up-Table (LUT) with a pull-up pull-down transistor chain and a hysteresis loop. The interconnections and the switch box are designed using pass transistors and SRAM. In this …

The Effect Of Near-Surface Metallurgy On The Machinability Of Cast Iron, William Dewey Peach

Masters Theses

"The increasing performance and durability of cutting tool inserts have created metallurgical challenges for production foundries to produce near-net shaped castings within strict dimensional tolerances. In order for foundries to take full advantage of the increased cutting speed capabilities, it becomes necessary to reduce machining allowances and produce much more stable casting surfaces. To accomplish this, a better understanding of the complex microstructures formed within the first 0.120 in. (3 mm) of the mold/metal interface (as-cast surface) is necessary. The goal of the work presented here was to examine the microstructures formed in the near-surface region of gray iron castings, …

Friction Stir Processing Of Magnesium Alloys, Gaurav Bhargava

Masters Theses

"Magnesium alloys have been fast catching up their attention in applications where both lightweight and exceptional strength is desired. But magnesium alloys suffer formability issues which limit their use to cast applications when designing complicated shapes. Friction stir processing (FSP) is technique for, imparting a fine-grained, homogeneous microstructure by which both strength and ductility can be enhanced. The results from the first part of present work showed that AZ31 alloy when employed the use of FSP, yielded significant strength and ductility gains but on the cost of anisotropy. The cause of anisotropy was investigated to be correlated to texture evolution …