Engineering Commons^™

Method Of Transferring Strained Semiconductor Structure, Michael Nastasi

Department of Mechanical and Materials Engineering: Faculty Publications

The transfer of strained semiconductor layers from one substrate to another substrate involves depositing a multilayer structure on a substrate having surface contaminants. An interface that includes the contaminants if formed in between the deposited layer and the substrate. Hydrogen atoms are introduced into the structure and allowed to diffuse to the interface. Afterward, the deposited multilayer structure is bonded to a second substrate and is separated away at the interface, which results in transferring a multilayer structure from one substrate at least one strained semiconductor layer and at least one strain-induced seed layer. The strain-induced seed layer can be …

Spectroscopicellipsometer And Polarmeter Systemis, John A. Woollam, Blaine D. Johs, Craig M. Herzinger, Ping He, Martin M. Liphardt, Galen L. Pfeiffer

Department of Electrical and Computer Engineering: Faculty Publications

A rotating compensator spectroscopic ellipsometer or polarimeter system having a source of a polychromatic beam of electromagnetic radiation, a polarizer, a stage for Supporting a material system, an analyzer, a dispersive optics and a detector system which comprises a multiplicity of detector elements, the system being functionally present in an environmental control chamber and therefore suitable for application in wide spectral range, (for example, 130-1700 nm). Preferred compensator design involves a Substantially achromatic multiple element compensator systems wherein multiple total internal reflections enter retardance into an entered beam of electromagnetic radiation, and the elements thereof are oriented to minimize changes …

Self-Organized Nanolayers Of Organosilane Molecules, Ocelio V. Lima

Department of Engineering Mechanics: Dissertations, Theses, and Student Research

There is a high degree of interest in organic thin films for lightweight, low power, rugged and flexible electronics. Conjugated organic molecules with polycyclic rings are being considered a major enabler of such applications. Due to a surface tension mismatch between the organic molecule with the inorganic support (mainly silicon oxides), molecular packing inside these thin films is often disordered, which suppresses the device performance. There are major efforts focused on modifying the bulk properties, for instance, maximizing orbital overlaps in the solid state, little attention was paid to receive long-range ordered thin films. A novel approach to afford conjugated …

Graphene On Pt(111): Growth And Substrate Interaction, Peter Sutter, Jerzy T. Sadowski, Eli Sutter

Department of Electrical and Computer Engineering: Faculty Publications

In situ low-energy electron microscopy (LEEM) of graphene growth combined with measurements of the graphene structure and electronic band structure has been used to study graphene on Pt (111). Growth by carbon segregation produces macroscopic monolayer graphene domains extending continuously across Pt (111) substrate steps and bounded by strongly faceted edges. LEEM during cooling from the growth temperature shows the propagation of wrinkles in the graphene sheet, driven by thermal stress. The lattice mismatch between graphene and Pt (111) is accommodated by moiré structures with a large number of different rotational variants, without a clear preference for a particular interface …

Optical Properties Of Semiconducting Boron Carbide For Neutron Detection Applications, Ravi B. Billa

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Solid state neutron detection devices based on semiconducting boron carbide have the potential for nearly ideal neutron detection effciency for thermal neutrons. The present work is focused on characterizing optical properties of this semiconducting boron carbide material as a step in further development of the material for neutron detection and other applications.

Semiconducting boron carbide films were grown on silicon substrates using plasma enhanced chemical vapor deposition and their optical properties were characterized using variable angle spectroscopic ellipsometry over a wide spectral range, from mid-infrared to vacuum-ultraviolet wavelengths. The effects of deposition substrate temperature and of post-deposition heat treatments on …

Wim Based Live Load Model For Bridge Reliability, Marek Kozikowski

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Development of a valid live load model is essential for assessment of serviceability and safety of highway bridges. The current HL-93 load model is based on the Ontario truck measurements performed in 1975. Since that time truck loads have changed significantly. Therefore, the goal of this study is to analyze 2005-2007 Weigh-In-Motion (WIM) data and develop a new statistical live load model.

The analyzed WIM data includes 47,000,000 records obtained from different states. A special program was developed to calculate the maximum live load effect. Comparison of the old and new truck data showed that on average Ontario trucks are …

Development Of The Mask Scentometer, A Comparison Of Ambient Odor Assessment Methods, And Their Application In Ground Truthing Atmospheric Dispersion Models, Christopher G. Henry

Department of Biological Systems Engineering: Dissertations, Theses, and Student Research

This dissertation is organized as four stand-alone papers. Paper No. 1 describes the development of the Mask Scentometer and reports dilution ratios measured during use by twelve different people. Dilution ratios at the Mask Scentometer’s five dilution-to-threshold (D/T) settings were found to be 0.35, 1, 2, 4.5 and 18. In Paper No.’s 2 and 4, ambient odor assessment methods were compared in both controlled laboratory conditions and in the field. Laboratory analysis of ambient air samples using dynamic triangular forced-choice olfactometry (DTFCO) did not correlate well with any of the ambient odor assessment methods. Average intensity-predicted D/T was roughly five …

Biological Sequence Simulation For Testing Complex Evolutionary Hypotheses: Indel-Seq-Gen Version 2.0, Cory L. Strope

Department of Computer Science and Engineering: Dissertations, Theses, and Student Research

Reconstructing the evolutionary history of biological sequences will provide a better understanding of mechanisms of sequence divergence and functional evolution. Long-term sequence evolution includes not only substitutions of residues but also more dynamic changes such as insertion, deletion, and long-range rearrangements. Such dynamic changes make reconstructing sequence evolution history difficult and affect the accuracy of molecular evolutionary methods, such as multiple sequence alignments (MSAs) and phylogenetic methods. In order to test the accuracy of these methods, benchmark datasets are required. However, currently available benchmark datasets have limitations in their sizes and evolutionary histories of the included sequences are unknown. These …

Quality-Driven Cross Layer Design For Multimedia Security Over Resource Constrained Wireless Sensor Networks, Wei Wang

Computer and Electronics Engineering: Dissertations, Theses, and Student Research

The strong need for security guarantee, e.g., integrity and authenticity, as well as privacy and confidentiality in wireless multimedia services has driven the development of an emerging research area in low cost Wireless Multimedia Sensor Networks (WMSNs). Unfortunately, those conventional encryption and authentication techniques cannot be applied directly to WMSNs due to inborn challenges such as extremely limited energy, computing and bandwidth resources. This dissertation provides a quality-driven security design and resource allocation framework for WMSNs. The contribution of this dissertation bridges the inter-disciplinary research gap between high layer multimedia signal processing and low layer computer networking. It formulates the …

Using Electronic Faculty Course Portfolios To Showcase Classroom Practices And Student Learning, Paul Savory, Amy M. Goodburn

Department of Industrial and Management Systems Engineering: Faculty Publications

Faculty course portfolios are a valuable medium for documenting and making visible the serious intellectual work of teaching. Developing a faculty course portfolio follows the same process one uses to explore a research question. Faculty members inquire, analyze, and document their teaching practices and the resulting student learning and then make the results accessible for use, review, and assessment by one’s peers. In this article, we introduce four types of electronic course portfolios that sponsor different forms of inquiry into student learning. We highlight the major components of each type, offer advice in developing them, and share examples of each. …

Acuta Enews December 2009, Vol. 38, No. 12

ACUTA Newsletters

ln This lssue

Board Approves Slate of Nominees for 2010-2011 Board of Directors

From the President.......... Harvey "Buck" Buchanan, Florida State Univ., ACUTA President

Mutli-Event Discount: Attend More in 2010 and Save More!

Tech Talk: what's the Next Really Big Thing?.........................Kevin Tanzillo, Dux PR

Washington Update Newsletter

Nominate Now for ACUTA Ruth A. Michalecki Leadership Award

Board Report.................Jeri A,. Semer, Executive Director

Happy Holidays from the ACUTA Staff

DC Update Dave Ostrom, Washington State Univ, (retired)

BlCSI-Governmental Relations for 2009-2010 ................Richard Reed, RCDD, BlCSI

Audio Seminar: "lMS: The Future of Fixed Mobile Convergence"

Follow Corporate Members on Twitter 8 lnfo …

Responses To “Comment On ‘Response To Plevin: Implications For Life Cycle Emissions Regulations’” And “Assessing Corn Ethanol: Relevance And Responsibility”, Adam Liska, Kenneth Cassman

Adam Liska Papers

This letter responds to two issues concerning the greenhouse gas (GHG) emissions intensity of corn-ethanol that were raised in discussions of our response (Liska and Cassman 2009) to Plevin’s article (2009), which critiques our original research (Liska et al. 2009) published in the Journal of Industrial Ecology. ... The suggestion by Anex and Lifset (2009) that corn-ethanol does not reduce GHG emissions by 47% compared to gasoline, but instead by “somewhere between” 35 to 40%, is unsubstantiated.

Modeling Of Metal-Ferroelectric-Insulator-Semiconductor Structures Based On Langmuir–Blodgett Copolymer Films, Timothy J. Reece, Stephen Ducharme

Stephen Ducharme Publications

Among the ferroelectric thin films used in field-effect transistor devices; the ferroelectric copolymer of polyvinylidene fluoride PVDF –CH2–CF2–, with trifluoroethylene TrFE –CHF–CF2–, has distinct advantages, including low dielectric constant, low processing temperature, low cost, and compatibility with organic semiconductors. The operation of a metal-ferroelectric insulatorsemiconductor structure with PVDF-TrFE as the ferroelectric layer was analyzed and optimized by numerical solution of the Miller and McWhorter model. A model device consisting of 20 nm PVDF/TrFE on a 10-nm-thick high-k dielectric buffer exhibits a memory window of 5 V with an operating voltage of 15 V. The operating voltage can be reduced to …

Effects Of Aggregate Angularity On Mix Design Characteristics And Pavement Performance, Leonardo T. Souza, Yong-Rak Kim

Nebraska Department of Transportation: Research Reports

No abstract provided.

Effects Of Aggregate Angularity On Mix Design Characteristics And Pavement Performance, Yong-Rak Kim, Leonardo T. Souza

Nebraska Department of Transportation: Research Reports

This research targeted two primary purposes: to estimate current aggregate angularity test methods and to evaluate current aggregate angularity requirements in the Nebraska asphalt mixture/pavement specification. To meet the first research objective, various aggregate angularity tests were estimated with the same sets of aggregates and were compared by investigating their characteristics on testing repeatability, cost, testing time, workability, and sensitivity of test results. For the second objective, the effect of aggregate angularity on mixture performance was investigated by conducting laboratory performance tests (the uniaxial static creep test and the indirect tensile fracture energy test) of five mixes designed with different …

Thermodynamically Consistent Large Deformation Constitutive Model For Glassy Polymers, Ashwani Kumar Goel

Department of Engineering Mechanics: Dissertations, Theses, and Student Research

Polycarbonate(PC), like most glassy polymers when undergoing large deformations exhibits a very complex thermo-mechanical response. We look at PC as a model glassy polymer and examine its response to changes in loading rate, loading direction and temperature. We show that plastic flow in compression is accompanied by a change in the elastic response of PC from isotropic to anisotropic. This provides the necessity to introduce a new modeling method that can capture these changes. A finite deformation plasticity like thermodynamically consistent model is developed to capture this and the observed rate and temperature dependence. For this modeling method, we need …

Live Load Models For Long Span Bridges, Marta Lutomirska

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

In the doctoral dissertation a live load model for long span structures was derived. The live load model is valid for spans between 600 ft and 5000 ft and it is intended to reflect current traffic patterns, quantities of trucks and their weights. The live load models available were developed for short and medium span bridges. Those models were not appropriate for long span bridges due to different types of structure and critical traffic patterns. Live load on long spans depends on traffic mix. One heavily overloaded truck does not have significant influence. Moreover, the continuous increase in the number …

Classification, Clustering And Data-Mining Of Biological Data, Thomas Triplet

Department of Computer Science and Engineering: Dissertations, Theses, and Student Research

The proliferation of biological databases and the easy access enabled by the Internet is having a beneficial impact on biological sciences and transforming the way research is conducted. There are currently over 1100 molecular biology databases dispersed throughout the Internet. However, very few of them integrate data from multiple sources. To assist in the functional and evolutionary analysis of the abundant number of novel proteins, we introduce the PROFESS (PROtein Function, Evolution, Structure and Sequence) database that integrates data from various biological sources. PROFESS is freely available athttp://cse.unl.edu/~profess/. Our database is designed to be versatile and expandable and will not …

Imprinting Polymerfilm On Patterned Substrate, Li Tan, Yen-Peng Kong, Stella W. Pang, Albert F. Yee

Department of Mechanical and Materials Engineering: Faculty Publications

A method of applying a pattern on a topography includes first applying a polymer film to an elastormer member, such as PDMS, to form a pad. The pad is then applied to a substrate having a varying topography under pressure. The polymer film is transferred to the substrate due to the plastic deformation of the polymer film under pressure compared to the elastic deformation of the PDMS member pulls away from the polymer layer, thereby depositing the polymer layer, thereby depositing the polymer layer upon the substrate.

Precast Post-Tensioned Segmental Pole System: U.S. Patent No. Us 6,851,231 B2, Maher K. Tadros, E. Terence Foster, Sherif A. Yehia, Audra L. Hansen

Department of Civil and Environmental Engineering: Faculty Publications

A precast post-tensioned segmental pole system capable of supporting a load is provided. The pole system includes a plurality of pole segments that use connectors and strands to anchor them together. The strands extend within a cavity formed in the pole segments and are external to the wall structure of the pole segments. The strands may be coupled between both of the pole segments, or be anchored to a connector. The connector includes an upper piece that is coupled to one pole segment, and a lower piece that is coupled to the other pole segment. Upper and lower pieces interlock …

Developing Processes And Criteria For External Reviews Of Scholarly Teaching, Paul Savory, Amy M. Goodburn

Department of Industrial and Management Systems Engineering: Faculty Publications

This workshop explores theoretical questions and practical strategies for how to develop peer reviewers for faculty required to document their scholarly teaching. After reading two mini case-studies of how faculty have documented the intellectual work of their teaching, participants will engage in guided discussion about reviewing and assessing such work and about developing faculty communities equipped to do such work. Presenter(s) also will seek feedback on guidelines that they have developed for external reviewers of SOTL work.

Acuta Enews November 2009, Vol. 38, No. 11

ACUTA Newsletters

ln This Issue

From ACUTA Headquarters: Announcing ACUTA Connections ............Jeri Semer, CAE, Exec. Dir

Audio Seminar: "Cutting the Telecom Power Bill"

Deadline Approaching for Institutional Excellence Awards

Tech Talk: Forecast: Cloudy, with a Slight Chance of Lost Data? .............Kevin Tanzillo, Dux PR 3

UNC to Place Wind Turbines along the Outer Banks......................... From Campus technology News Update

DC Update ..........Dave Ostrom, Washington State University (retired)

lnfo Links................. Randy Hayes, Univ. of Northern lowa

Washington Update Newsletter for ACUTA Members

Bring Fall Seminar to Your Desktop 6 Remember: Nominate Now for 2010-2011 Board of Directors

Send Payments Direct to ACUTA

Addressing …

Next Generation Biofuels And Advanced Engines For Tomorrow’S Transportation Needs, Sandia National Laboratories, Doe Combustion Research Facility, Doe Joint Bioenergy Institute

US Department of Energy Publications

In November 2009, Sandia National Laboratories hosted the Next Generation Biofuels and Advanced Engines for Tomorrow’s Transportation Needs Workshop. The event focused on the combined opportunities in biofuels and engines in the transportation sector. The workshop brought together the DOE Combustion Research Facility and the DOE Joint BioEnergy Institute along with oil companies, biofuel developers, engine manufacturers, suppliers, and experts from the university, regulatory, finance, and national laboratory communities. The intersection of biofuels and engines, if properly scaled, can meet a triad of national goals:

• Reduced climate impact

• Economic development

• Energy security through energy diversity

The workshop …

Moisture Sensitivity Of Hot Mix Asphalt Mixtures In Nebraska -- Phase Ii, Ingryd Pinto, Hoki Ban, Yong-Rak Kim

Nebraska Department of Transportation: Research Reports

No abstract provided.

Use Of Ground Penetrating Radar For Construction Quality Assurance O Concrete Pavement, George Morcous, Ece Erdogmus

Nebraska Department of Transportation: Research Reports

No abstract provided.

Modeling And Simulation Of Interactions Between Blast Waves And Structures For Blast Wave Mitigation, Wen Peng

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Explosions occur in military conflicts as well as in various industrial applications. Air blast waves generated by large explosions move outward with high velocity, pressure and temperature. The blast waves not only incapacitate military and civilian personnel, but also damages buildings, vehicles, and other properties. Hence, there has been extensive research on how to mitigate blast wave effects. Understanding the interactions between blast waves and structures is a very important step in the development of devices for blast wave mitigation. The objective of this dissertation is to explore the complicated physical problem of blast waves impacting structures. The structures comprise …

Nutrient And Bacterial Transport In Runoff From Soil And Pond Ash Amended Feedlot Surfaces, John E. Gilley, Jason R. Vogel, Elaine D. Berry, Roger Eigenberg, David B. Marx, Brian L. Woodbury

Department of Biological Systems Engineering: Papers and Publications

The addition of pond ash (fly ash that has been placed in evaporative ponds and subsequently dewatered) to feedlot surfaces provides a healthier environment for livestock and economic advantages for the feedlot operator. However, the water quality effects of pond ash amended surfaces are not well understood. The objectives of this field investigation were to: (1) compare feedlot soil properties, and nutrient and bacterial transport in runoff, from pond ash amended surfaces and soil surfaces; (2) compare the effects of unconsolidated surface materials (USM) (loose manure pack) and consolidated subsurface materials (CSM) (compacted manure and underlying layers) on nutrient and …

Extraction And Characterization Of Natural Cellulose Fibers From Common Milkweed Stems, Narendra Reddy, Yiqi Yang

Department of Biological Systems Engineering: Papers and Publications

Natural cellulose fibers with cellulose content, strength, and elongation higher than that of milkweed floss and between that of cotton and linen have been obtained from the stems of common milkweed plants. Although milkweed floss is a unique natural cellulose fiber with low density, the short length and low elongation make milkweed floss unsuitable as a textile fiber. The possibility of using the stems of milkweed plant as a source for natural cellulose fibers was explored in this research. Natural cellulose fibers extracted from milkweed stems have been characterized for their composition, structure, and properties. Fibers obtained from milkweed stems …

Nebraska Blueprint- Fall 2009

Nebraska Blueprint (Student Publication)

Table of Contents:

From the Editor

Then and Now

Engineering Block: A History of Home

College of Engineering Timeline

Longtime Professors Leave Lasting Impact

IEEE 125th Anniversary Celebration

Nanoscale Domain Patterns In Ultrathin Polymer Ferroelectric Films, Pankaj Sharma, Timothy J. Reece, Daniel W. Wu, Vladimir M. Fridkin, Stephen Ducharme, Alexei Gruverman

Stephen Ducharme Publications

High-resolution studies of domain configurations in Langmuir–Blodgett films of ferroelectric polymer poly(vinylidene fluoride-trifluoroethylene), P(VDF-TrFE), have been carried out by means of piezoresponse force microscopy (PFM). Changes in film thickness and morphology cause significant variations in polarization patterns. In continuous films and nanomesas with relatively low thickness/grain aspect ratio (<1/10), the relationship between the average domain size and thickness follows the Kittel law. Nanomesas with high aspect ratio (>1/5) exhibit significant deviations from this law, suggesting additional surface-energy-related mechanisms affecting the domain patterns. Polarization reversal within a single crystallite has been demonstrated and local switching parameters (coercive voltage and remnant piezoresponse) have been measured by monitoring the local hysteresis loops. Reliable control of polarization at the sub-grain level demonstrates …