Engineering Commons^™

Retrieval Of Subpixel Snow Covered Area, Grain Size, And Albedo From Modis, Thomas H. Painter, Karl Rittger, Ceretha Mckenzie, Peter Slaughter, Robert E. Davis, Jeff Dozier

United States Army: Publications

We describe and validate a model that retrieves fractional snow-covered area and the grain size and albedo of that snow from surface reflectance data (product MOD09GA) acquired by NASA's Moderate Resolution Imaging Spectroradiometer (MODIS). The model analyzes the MODIS visible, near infrared, and shortwave infrared bands with multiple endmember spectral mixtures from a library of snow, vegetation, rock, and soil. We derive snow spectral endmembers of varying grain size from a radiative transfer model specific to a scene's illumination geometry; spectra for vegetation, rock, and soil were collected in the field and laboratory. We validate the model with fractional snow …

Monoclinic Optical Constants, Birefringence, And Dichroism Of Slanted Titanium Nanocolumns Determined By Generalized Ellipsometry, Daniel Schmidt, Benjamin Booso, Tino Hofmann, Eva Schubert, Andrew Sarangan, Mathias Schubert

Nebraska Center for Materials and Nanoscience: Faculty Publications

Generalized spectroscopic ellipsometry determines the principal monoclinic optical constants of thin films consisting of slanted titanium nanocolumns deposited by glancing angle deposition under 85° incidence and tilted from the surface normal by 47°. Form birefringence measured for wavelengths from 500 to 1000 nm renders the Ti nanocolumns monoclinic absorbing crystals with c-axis along the nanocolumns, b-axis parallel to the film interface, and 67.5° monoclinic angle between the a- and c-axes. The columnar thin film reveals anomalous optical dispersion, extreme birefringence, strong dichroism, and differs completely from bulk titanium. Characteristic bulk interband transitions are absent in the spectral range investigated.

The Magnetoelectric Effects In Multiferroic Composite Nanofibers, C. L. Zhang, W. Q. Chen, S. H. Xie, J. S. Yang, Jiangyu Li

Department of Engineering Mechanics: Faculty Publications

In this letter, we analyze the quasistatic and dynamic magnetoelectric responses of multiferroic composite nanofibers consisting of both ferroelectric and ferromagnetic phases and demonstrate that the nanofibers exhibit magnetoelectric responses orders of magnitude higher than multiferroic composite thin films of similar compositions. The analysis suggests that the multiferroic nanofibers are promising for magnetoelectric applications.

Tem Study Of Lizardite-1t Particles In Toluene Solvent, J. Yan, Xingzhong Li, J. Y. Jiang, L. Tan

Department of Engineering Mechanics: Faculty Publications

To investigate the self-assembled growth of organosilane molecules carrying Si, C and H to form multiple layers, samples were prepared in toluene and then transferred to TEM Cu grids coated with thin C films for TEM observation. It is surprising that micrometer sized flakes with a main composition of Mg and Si (or Al and Si) were occasionally observed in the TEM specimens, later were identified as lizardite-1T phase. To trace down the source of the inorganic particles, all procedures in the sample preparation were carefully checked. The particles of the lizardite-1T phase were confirmed from the organic solvent of …

Optimal Electrode Shape And Size For Shear Mode Thin Film Acoustic Wave Resonators, L. M. Xu, B. B. Tang, Y. T. Hu, H. Fan, J. S. Yang

Department of Engineering Mechanics: Faculty Publications

We study electrode shape and size for plates of hexagonal crystals or polarized ceramics with the sixfold axis or the poling direction parallel to the plate surfaces so that they can be excited into thickness-shear vibration by an electric field in the plate thickness direction. Electrode size and shape optimal in the sense that they satisfy the criterion of Bechmann’s number in every direction are determined.

Connected Vibrating Piezoelectric Bimorph Beams As A Wide-Band Piezoelectric Power Harvester, Zengtao Yang, Jiashi Yang

Department of Engineering Mechanics: Faculty Publications

We analyze coupled flexural vibration of two elastically and electrically connected piezoelectric beams near resonance for converting mechanical vibration energy to electrical energy. Each beam is a so-called piezoelectric bimorph with two layers of piezoelectrics. The 1D equations for bending of piezoelectric beams are used for a theoretical analysis. An exact analytical solution to the beam equations is obtained. Numerical results based on the solution show that the two resonances of individual beams can be tuned as close as desired by design when they are connected to yield a wide-band electrical output. Therefore, the structure can be used as a …

Open Workflows: Context-Dependent Construction And Execution In Mobile Wireless Settings, Louis Thomas, Justin Wilson, Grui-Catalin Roman, Christopher Gill

All Computer Science and Engineering Research

Existing workflow middleware executes tasks orchestrated by rules defined in a carefully handcrafted static graph. Workflow management systems have proved effective for service-oriented business automation in stable, wired infrastructures. We introduce a radically new paradigm for workflow construction and execution called open workflow to support goal-directed coordination among physically mobile people and devices that form a transient community over an ad hoc wireless network. The quintessential feature of the open workflow paradigm is dynamic construction and execution of custom, context-specific workflows in response to unpredictable and evolving circumstances by exploiting the knowledge and services available within a given spatiotemporal context. …

Complex Electronic States In Double-Layered Ruthenates (Sr1−Xcax)3ru2o7, Zhe Qu, Jin Peng, David Fobes, Leonard Spinu, Zhiqiang Mao

Physics Faculty Publications

The magnetic ground state of (Sr_1−xCa_x)₃Ru₂O₇ (0≤x≤1) is complex, ranging from an itinerant metamagnetic state (0≤x<0.08) to an unusual heavy-mass nearly ferromagnetic (FM) state (0.08<x<0.4), and finally to an antiferromagnetic (AFM) state (0.4≤x≤1). In this report we elucidate the electronic properties for these magnetic states, and show that the electronic and magnetic properties are strongly coupled in this system. The electronic ground state evolves from an AFM quasi-two-dimensional metal for x=1.0 to an Anderson localized state for 0.4≤x<1.0 (the AFM region). When the magnetic state undergoes a transition from the AFM to the nearly FM state, the electronic ground state switches to a weakly localized state induced by magnetic scattering for 0.25≤x<0.4, and then to a magnetic metallic state with the in-plane resistivity ρ_ab∝T^α (α>2) for 0.08<x<0.25. The system eventually transforms into a Fermi-liquid ground state when the magnetic ground state enters the itinerant metamagnetic state for x<0.08. When x approaches the critical composition (x∼0.08), …

Regulation Of Intracellular Calcium Concentration By Nanosecond Pulsed Electric Fields, Shaka S. Scarlett, Jody A. White, Peter F. Blackmore, Karl H. Schoenbach, Juergen Kolb

Bioelectrics Publications

Changes in [Ca²⁺]_i response of individual Jurkat cells to nanosecond pulsed electric fields (nsPEFs) of 60 ns and field strengths of 25, 50, and 100 kV/cm were investigated. The magnitude of the nsPEF-induced rise in [Ca²⁺]_i was dependent on the electric field strength. With 25 and 50 kV/cm, the [Ca²⁺]_i response was due to the release of Ca²⁺ from intracellular stores and occurred in less than 18 ms. With 100 kV/cm, the increase in [Ca²⁺]_i was due to both internal release and to influx across the plasma …

Nanoscale Approaches For Biomolecule Separation And Detection, Swati Goyal

Bioengineering Theses - Archive

Nanotechnology has the potential to contact and impact the biological interactions at the most basic chemical and physical levels. New approaches to nanodevices allow high sensitivity and specificity with low sample requirement. Such devices are potential candidates for early disease detection at molecular levels and have important implications in associated therapeutics.This research work focuses on two different areas: developing devices for DNA detection, protein enrichment and exploring material properties to fabricate microscale/nanoscale structures. In one approach, hairpin probe DNA was used to detect fmol of ss-DNA from k-ras oncogene. In another approach, nanochannel based device was developed to selectively increase …

University Place, Sarah Digiulio, David Marc, Krista Flynt, Timeka Williams, Christine Yackel, Jay Cox

Syracuse University Magazine

No abstract provided.

Enhancing Systems Integration By Incorporating Business Continuity Drivers, Bajgoric Nijaz, Young Moon

Mechanical and Aerospace Engineering - All Scholarship

Purpose – The purpose of this paper is to present a framework for developing an integrated operating environment (IOE) within an enterprise information system by incorporating business continuity drivers. These drivers enable a business to continue with its operations even if some sort of failure or disaster occurs.

Design/methodology/approach – Development and implementation of the framework are based on holistic and top-down approach. An IOE on server’s side of contemporary business computing is investigated in depth.

Findings – Key disconnection points are identified, where systems integration technologies can be used to integrate platforms, protocols, data and application formats, etc. Downtime …

A Framework For Managing Engineering Change Propagation, Krishna Reddi, Young Moon

Mechanical and Aerospace Engineering - All Scholarship

Engineering Changes (ECs) are facts of life for any company developing and introducing new products, despite a commonly held notion that they are distractions from normal operation. Companies can become more innovative by utilising ideas from the ECs or by learning how to handle the ECs. This paper presents a framework to manage the ECs effectively, particularly the issue of EC propagation. An EC seldom confines itself to a single change, but triggers other changes in different components. The framework is designed to identify the affected components automatically, capture the required knowledge during the design phase of the product life …

Escudo: A Fine-Grained Protection Model For Web Browsers, Karthick Jayaraman, Wenliang Du, Balamurugan Rajagopalan, Steve J. Chapin

Electrical Engineering and Computer Science - All Scholarship

Web applications are no longer simple hyperlinked documents. They have progressively evolved to become highly complex---web pages combine content from several sources (with varying levels of trustworthiness), and incorporate significant portions of client-side code. However, the prevailing web protection model, the same-origin policy, has not adequately evolved to manage the security consequences of this additional complexity. As a result, web applications have become attractive targets of exploitation. We argue that this disconnection between the protection needs of modern web applications and the protection models used by web browsers that manage those applications amounts to a failure of access control. In …

A Cryptanalysis Methodology For The Reverse Engineering Of Encrypted Information In Images, Allan Anthony Rwabutaza

Browse all Theses and Dissertations

Security is an important issue related to the storage and communication of data and information. In data and information security, cryptography and steganography are two of the most common security techniques. On one hand, there is cryptography, which is the secret communication between two parties by message scrambling on the sender's side and message unscrambling on the receiver's side so that only the intended receiver gets the secret message. On the other hand, there is steganography, which is the hiding of information in a medium in such a way that no one other than the sender or the intended receiver …

Radon - Repair And Diagnosis In Ontology Networks, Qiu Ji, Peter Haase, Guilin Qi, Pascal Hitzler, Steffen Stadtmuller

Computer Science and Engineering Faculty Publications

One of the major challenges in managing networked and dynamic ontologies is to handle inconsistencies in single ontologies, and inconsistencies introduced by integrating multiple distributed ontologies. Our RaDON system provides functionalities to repair and diagnose ontology networks by extending the capabilities of existing reasoners. The system integrates several new debugging and repairing algorithms, such as a relevance-directed algorithm to meet the various needs of the users.

Asymmetry Of Model Bin Wall Loads And Lateral Pressure Induced From Two- And Three-Dimensional Obstructions Attached To The Wall, Marek Molenda, Michael D. Montross, Sidney A. Thompson, Jozef Horabik

Biosystems and Agricultural Engineering Faculty Publications

An obstruction attached to the wall of a bin produced by cohesive, moldy grain has been reported as a source of failure in steel bins. A study was conducted to estimate the effect of two-dimensional (plane) and three-dimensional (block) obstructions attached to the corrugated wall in a flat-floor model bin where the lateral wall pressure and vertical wall loads were measured. The model bin was 1.83 m in diameter, 5.75 m high, and filled with soft red winter wheat to a depth of 5.0 m (height-to-diameter ratio h/d of 2.75). The plane obstruction had the form of an annulus segment …

Retrofitting Tractors With Rollover Protective Structures: Perspective Of Equipment Dealers, Shalome M. Tonelli, Kelley J. Donham, Kerry Leedom-Larson, Wayne Sanderson, Mark A. Purschwitz

Biosystems and Agricultural Engineering Faculty Publications

This study was one of a cluster of studies that originated via requests for proposals from the NIOSH National Agricultural Tractor Safety Initiative. The present study design consisted of several steps: (1) formation of an advisory group, (2) development and testing of a standard paper self-responding survey instrument, (3) sample selection of farm equipment dealers, (4) administration of the survey, (5) assessment and analysis of the survey, and (6) in-person response panel of dealers (n = 80) to review results of the questionnaire for further definition and sharpening of the recommendations from the survey. A key finding is that most …

Sustainable Development Extension Plan (Sudex): Community Mobilization Through Proactive Participation And Synergistic Alliance To Alliviate Poverty And Achieve Sustainable Self Sufficiency, Stephen Forbes

Open Access Theses & Dissertations

This Dissertation describes a sustainable development extension plan (Sudex Plan) to help communities in developing countries achieve Goal 1 of the United Nation's Millennium Development Goals (MDG). Goal 1 focuses on reducing poverty and hunger by 50% by the year 2015, but all the MDG are interrelated and one can not be achieved without considering the others, and to attain any is an empty accomplishment without ways to ensure that they can be sustained and continuously improved with the means to pass on the information, knowledge and lessons learned from community to community, generation to generation. The Sudex Plan is …

Directional Analysis And Filtering For Dust Storm Detection In Noaa-Avhrr Imagery, Swapna Janugani

Open Access Theses & Dissertations

In this research, we propose spatio-spectral processing techniques for the detection of dust storms in 5-band NOAA-AVHRR imagery. The research is mainly focused on locating the dust sources and automatically finding the transport direction of the dust storm. Previous methods that use simple band math analysis have produced promising results but have some drawback in producing consistent results when low SNR images are used. Moreover, in seeking to automate the dust storm detection, the presence of clouds in the vicinity of the dust storm creates a challenge in being able to distinguish these two types of image texture. Our research …

Novel Approach To Predict The Crash Testing Data Using Multiple Regression Analysis And Principal Component Analysis, Ravi Lochan Kallur

Open Access Theses & Dissertations

In the design process of vehicles, crash tests are very critical to determine the safety measures. Every motor manufacturing company has to maintain certain standards for their autos. This will lead to the design optimization of safety measures utilizing the data available from crash tests. The engineers perform various experiments to generate data from crash testing of vehicles in their manufacturing facility. With the help of simulators; they create a virtual environment to perform design changes. Hence the data obtained from the crash tests is vital in design optimization of safety systems. The present study deals with the technologies involved …

Buckling Of Dome Structure With Opening, Under Wind Load, Anup Ramesh Marathe

Open Access Theses & Dissertations

Double layered parabolic dome structure, with opening in roof is analyzed for buckling under wind load. Domes with three different opening sizes are used and external wind load is applied from different directions without changing the position of the opening. Dead load and internal wind pressure is also applied. The dead load and internal wind pressure is kept constant. The internal wind pressure is applied as per the ASCE building requirement that is once in positive direction which is towards the surface and once in negative direction which is away from the surface. The data for this project was sent …

Spatio-Temporal Ecg Analysis For Localization Of Arrhythmias Using Precordial Ecg Leads And 128-Lead Systems, Eduardo Morales

Open Access Theses & Dissertations

A novel and state-of-the-art approach for the analysis of cardiac arrhythmias is proposed. Currently, the analysis of the electrocardiogram is only performed in the time-domain. The proposed method improves the electrocardiogram analysis by adding spatial properties. The spatial properties added to the electrocardiogram allow for the analysis of specific regions inside the human heart where cardiac arrhythmias are suspected to have occurred. In this Dissertation, the concept of electrocardiography was extended using advanced bioelectromagnetism theory. In concrete, the multiple dipole model of the human heart was used to extend the concept of electrocardiography from a temporal analysis to a spatial-temporal …

An Enhanced Method For The Existing Bluetooth Pairing Protocol To Avoid Impersonation Attacks, Patricia Aidee Mendoza

Open Access Theses & Dissertations

As the use of the Bluetooth technology in wireless technologies such as computers, cell phones, personal digital assistants (PDAs), printers, digital cameras, PC peripherals, and headphones, among others, has enormously increased during this decade, it has also increased the need of employing a more secure and robust pairing protocol that protects the transfer of information between Bluetooth devices.

The existing Bluetooth pairing protocol starts when a Bluetooth device is set to be in discoverable mode and it is found by another device. After this step is completed, it initiates the pairing procedure by sharing some important device information, then by …

Analysis Of Cluster Compute Nodes With Varying Memory Hierarchy Distributions, Jon Valentin Ramirez

Open Access Theses & Dissertations

This Thesis compares a Compute Node, a cluster compute node that can completely contain smaller processes within, but not larger ones, with a Memory Node, a cluster compute node that can fully contain large processes within main memory. The Compute Node and Memory Node are tested by executing matrix multiplication programs that range in size from small processes similar to jobs that can be run on a single workstation to large processes that would only fit entirely within a Memory Node. Memory was allocated using four types of memory allocation: static, external, dynamic, and automatic. This analysis provides a measure …

Assessment Of Super-Resolution For Face Recognition From Very-Low Resoution Images, James Roger Roeder

Open Access Theses & Dissertations

Super-Resolution (SR) involves the registration of multiple images/frames and reconstruction of a single higher resolution image. The goal of this research is to use multiple, very-low resolution images, such as those produced from a video sequence in a wireless sensor network system, as input to the super-resolution process in a face recognition system. The algorithm used for face recognition is the Fisherfaces method with a nearest neighbor classifier used for the recognition decision. Super-resolution consists of two stages, a registration stage and a reconstruction stage.

The testing images were segmented using a simple skin color detection approach. After the cropping, …

Characterization Of High Resolution Range And Doppler Chaotic Ladar, Berenice Verdin

Open Access Theses & Dissertations

Compared to high range resolution radar systems, chaotic LADAR (laser detection and ranging) has the potential of providing an increase in range-Doppler resolution by several orders of magnitude.

The purpose of this project is to determine system parameters and signal processing schemes required to build a high resolution chaotic LADAR. Specifically, the LADAR is based on a semiconductor laser that generates a wideband chaotic signal via optical feedback. The behavior of the laser output is modeled by changing the control parameters of the delay differential equations that dictate the behavior of the laser output. Depending on the feedback level and …

Characterization And Cytotoxic Assessment Of Ballistic Aerosolized Particulates For Tungsten Alloy Penetrators Interacting With Steel Targets, Brenda Ivette Machado

Open Access Theses & Dissertations

The aerosolized particulates produced during an impact of depleted uranium munitions can potentially contaminate extensive areas around the impact sites and cause a wide spectrum of civilian and military damage. Thus materials such as WHA have been prompted for consideration. The present research is concerned with the regular collection of aerosol particulates associated with ballistic WHA rod penetration into rolled homogeneous steel (RHA) or other related steel armor as armor plate sequences. Particulate size characterization via scanning electron microscopy (SEM) and transmission electron microscopy (TEM) along with chemical compositions via energy dispersive spectroscopy (EDS) were the focus of this research. …

Retrofitting A Stereolithography System Within A Laminar Flow Hood, Mahesh Pandurang Tonde

Open Access Theses & Dissertations

This research focused on retrofitting the stereolithography (SL), a rapid prototyping technology, inside a laminar flow hood to provide an aseptic, particulate-free environment for scaffold fabrication. Two of the important objectives of this project were to retrofit the commercial SLA 250/30 inside a laminar flow hood to demonstrate that the manufacturability of the Bio-SL system was comparable to original SLA 250 system and to conduct the sterility test on fabricated scaffolds to show that the laminar flow hood was able to provide an aseptic, particulate-free environment for the fabrication.

Fabrication And Characterization Of Zirconium Oxide Thin Films, Vemnkata Rama Sesha Ravi Kumar Vemuri

Open Access Theses & Dissertations

Zirconium oxide (ZrO2) is an important material with a potential for a wide range of technological applications. The outstanding chemical stability, electrical and mechanical properties, high dielectric constant, and wide band gap of ZrO2 make it suitable for several industrial applications in the field of optics, electronics, magneto-electronics, and optoelectronics. ZrO2 is frequently used as a high refractive index material in multilayer optical coatings in high power laser systems. ZrO2 is employed in super plastic structural ceramics that demonstrate excellent strength and fracture toughness. ZrO2 has been considered as a promising dielectric to replace SiO2 in advanced metal oxide semiconductor …