Engineering Commons^™

Prostate Cancer Biomarker Identification: A Comparative Study, Wenjuan Jiang

Computational Modeling & Simulation Engineering Theses & Dissertations

With the current development of proteomics techniques, the discovery of potential molecular biomarkers for early detection of prostate cancer has been greatly improved. In this thesis, we implemented five classifiers including the support vector machine (SVM), Bayesian Classifier, Decision Tree, Random Forest and the Multilayer perceptron (MLP) to test their effectiveness in prostate cancer biomarker identification using matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) tissue imaging data. The classifiers were utilized to discriminate cancer mass spectra from normal ones for the data collected at the Eastern Virginia Medical School (EVMS). There are 94 7 spectra from normal tissues and 27 from …

Optimal "Image-Based" Weighting For Energy-Resolved Ct, Taly Gilat Schmidt

Biomedical Engineering Faculty Research and Publications

This paper investigates a method of reconstructing images from energy-resolved CT data with negligible beam-hardening artifacts and improved contrast-to-nosie [sic] ratio (CNR) compared to conventional energy-weighting methods. Conceptually, the investigated method first reconstructs separate images from each energy bin. The final image is a linear combination of the energy-bin images, with the weights chosen to maximize the CNR in the final image. The optimal weight of a particular energy-bin image is derived to be proportional to the contrast-to-noise-variance ratio in that image. The investigated weighting method is referred to as “image-based” weighting, although, as will be described, the weights can …

Elastic, Viscous, And Mass Load Effects On Poststroke Muscle Recruitment And Co-Contraction During Reaching: A Pilot Study, Tina M. Stoeckmann, Katherine J. Sullivan, Robert A. Scheidt

Biomedical Engineering Faculty Research and Publications

Background: Resistive exercise after stroke can improve strength (force-generating capacity) without increasing spasticity (velocity-dependent hypertonicity). However, the effect of resistive load type on muscle activation and co-contraction after stroke is not clear.

Objective: The purpose of this study was to determine the effect of load type (elastic, viscous, or mass) on muscle activation and co-contraction during resisted forward reaching in the paretic and nonparetic arms after stroke.

Design: This investigation was a single-session, mixed repeated-measures pilot study.

Methods: Twenty participants (10 with hemiplegia and 10 without neurologic involvement) reached forward with each arm against equivalent elastic, viscous, and mass loads. …

Land Conservation And Land Use In New England: Trends, Challenges & Opportunities, Amanda Loomis, Tom Devine, Andrea Small, Brittany Howard, Brett Richardson, Stephanie Dulac

Land Conservation

Sprawling development patterns accelerated across the New England landscape in the last three decades and consumed the region‘s forests, farms, and open spaces at an unprecedented rate. New England‘ers in all six states formed land trusts, supported statewide conservation organizations, and collaborated with state and federal partners to protect some of their most-prized recreation lands, wildlife habitats, and working lands. The current economic recession has slowed development pressures across the region and offers an opportunity to build on recent successes. The time is right to plan a coordinated New England conservation strategy that protects and links the region‘s natural assets. …

Modelling Of Coal Slag Flow And Layer Thickness In A High Temperature Entrained Flow Gasifier, H. Katalambula

Tanzania Journal of Engineering and Technology (TJET)

A 2-D model for the slag flow simulation in an entrained flow gasifier has been developed. In addition to mass, momentum and energy conservation equations, volume of fluid (VOF) equation was solved to track the liquid-gas interface. Liquid phase consists of melted coal ash particles which deposits on the wall and move downward. The gasification reaction is not considered here but it is postulated to have a mass flow through the interface towards the mass of the liquid phase. The reactor walls are usually kept cold so a temperature gradient and then a solid layer form within the slag layer. …

Auditing Of Traffic Signs And Road Markings In Dar Es Salaam City, Hannibal Bwire

Tanzania Journal of Engineering and Technology (TJET)

This study examines the efficacy of the traffic signs and road markings in Dar es Salaam City. The study focuses on the availability and conditions of traffic signs and road markings in some selected roads in the city. Auditing of traffic signs and road markings is carried out as one of the means of promoting road safety and improving road capacity in the city. The auditing procedure involved field studies through the use of traffic signs/markings checklists and ranking of road stretches according to the availability and conditions of traffic signs observed for improvement prioritization in case of financial constraints. …

The “Tea Cup Effect” And Removal Of Suspended Solids From Water, D.A. Mashauri

Tanzania Journal of Engineering and Technology (TJET)

Suspended solids problem in water is an issue as old as water treatment itself. Suspended solids can be causative to eroding through abrasion of impellers, pump casings, pipes and other water works related appurtenances. It is therefore appropriate that suspended solids must be removed as early as possible in the water works treatment facilities. It is usually done at the river/lake intakes to reduce the coarse particulate matter that would otherwise adversely affect the water works thereafter. The fine particles that will escape the entrapment at the intake works would therefore require further and more effective system that would remove …

Controlled Synthesis Of Zno Nanowires Towards The Fabrication Of Solar Cells, Dongshan Yu

Theses and Dissertations

In recent years, quasi-one-dimensional materials have attracted a lot of research attention due to their remarkable properties, and their potential as building blocks for nanoscale electronic and optoelectronic devices. A modified chemical vapor deposition (CVD) method has been used to synthesize ZnO nanowires. Electron microscopy and other characterization techniques show that nanowires having distinct morphologies when grown under different conditions. The effects of reaction parameters including reaction time, temperature, carrier gas flow rate, substrates and catalyst material upon the size, shape, and density of ZnO nanowire arrays have been investigated. Excitonic solar cells —including Gratzel-type cells, organic and hybrid organic/inorganic …

Tissue Engineering Cellularized Silk-Based Ligament Analogues, Scott Sell

Theses and Dissertations

The resurgence, and eventual rise to prominence in the field of tissue engineering, that electrospinning has experienced over the last decade speaks to the simplicity and adaptability of the process. Electrospinning has been used for the fabrication of tissue engineering scaffolds intended for use in nearly every part of the human body: blood vessel, cartilage, bone, skin, nerve, connective tissue, etc. Diverse as the aforementioned tissues are in both form and function, electrospinning has found a niche in the repair of each due to its capacity to consistently create non-woven structures of fibers ranging from nano-to-micron size in diameter. These …

Top 10 Checklist - Energy-Efficient Buildings For The Southern United States, Florida Solar Energy Center, James Cummings

FSEC Energy Research Center®

The following Top Ten Checklist provides recommendations for creating energy efficient commercial buildings in areas with hot and humid summers. Commercial and institutional buildings vary greatly, from one to another, in size, use, and type of construction. For purposes of this Top Ten Checklist we are assuming a medium-sized (20,000 to 50,000 ft²) office building located in areas with hot and humid summers. The issues that are raised here may equally apply to schools, churches, theaters, and some retail buildings.

Methodology For Thermal Modeling Of On-Chip Interconnects Based On Electromagnetic Simulation Tools, Lijun Jiang, H. Smith, A. Deutsch, K. Chandra, B. J. Rubin, J. Gill, S. K. Kolluri

Electrical and Computer Engineering Faculty Research & Creative Works

A method and apparatus for thermal modeling of on-chip interconnects using electromagnetic tools to determine a temperature profile across the interconnect structure and the temperature at each node of an equivalent thermal circuit derived from an electrical model.

Development Of A Reusable Aerospike Nozzle For Hybrid Rocket Motors, Patrick Lemieux

Mechanical Engineering

The Department of Mechanical Engineering at the California Polytechnic State University, San Luis Obispo, has developed an innovative program of experimental research and development on hybrid rocket motors (where the fuel and the oxidizer are in different phases prior to combustion). One project currently underway involves the development of aerospike nozzles for such motors. These nozzles, however, are even more susceptible to throat ablation than regular converging-diverging nozzles, due the nature of their flow expansion mechanism. This paper presents the result of a recent development project focused on reducing throat ablation in hybrid rocket motor nozzles. Although the method is …

Energy Losses In Cross Junctions, Zachary B. Sharp, Michael C. Johnson, Steven L. Barfuss, William J. Rahmeyer

Civil and Environmental Engineering Faculty Publications

Energy losses occurring in pipe junctions have been studied for many years. Head loss coefficients (KK) are commonly used to characterize losses across elbows, tees, crosses, valves, and other pipe fittings. When accurate values of KK are used, the flow rate and corresponding total head at any location in a pipe network can be calculated. While KK is well defined for most pipe junctions and fittings, the literature has limited documentations of KK for crosses. This study was commissioned to determine KK for a wide range of flow combinations in a pipe cross with equal diameter pipes and varied flow …

Comparison Of Passive Cervical Spine Flexion In Children And Adults, Jami Saffioti

Theses and Dissertations

Head trauma is the most frequent injury sustained by children in car crashes, and the neck plays a key role in governing head kinematics during the crash. Pediatric anthropomorphic test devices (ATDs) are used to assess the risk of head injury, yet the pediatric ATD neck is a size-scaled model of the adult ATD neck, with no consideration for the tissue properties and morphological changes during human development. To help understand the effects of maturation on the changes in neck flexion biomechanics, this study compared the passive cervical spine flexion of children to adults in specific age groups (6-8, 9-12, …

Ceas E-News 06.23.2009, College Of Engineering And Applied Sciences

College of Engineering and Applied Sciences News

PCI Chair surprised with award while on Jordanian visit

Application Of Volterra Functions To X-31 Aircraft Model Motion, United States Air Force Academy, Russell M. Cummings

Aerospace Engineering

Recent advances towards an efficient computational method for accurately determining the stability and control characteristics of an aircraft are discussed and critiqued. The present approach with greatest promise is to reduce the number of high-fidelity CFD simulations by using Volterra functions Reduced Order Modeling. This type of reduced order model is a predictive model which has a unique training maneuver -a unit impulse. The advantage of such an approach is the fast prediction of the aerodynamic characteristics of an aircraft. This article presents the results of application of the Volterra functions ROM for prediction of linear movement of a 2D …

Comparison Of Overset Grid And Grid Deformation Techniques Applied To 2-Dimensional Naca Airfoils, Charles M. Hoke, Robert K. Decker, Russell M. Cummings, David R. Mcdaniel, Scott A. Morton

Aerospace Engineering

This paper documents a comparison of overset grid and grid deformation schemes applied to flapped and non-flapped NACA airfoil configurations in order to determine the relative accuracy and computational efficiency of each method. This study is part of a larger effort to use computational fluid dynamics to perform moving control surface calculations. Three different cases, using both overset and deformed grids, are considered, including: a) lift and moment comparison of a quasi-steady, non-flapped 0012 airfoil, b) lift and moment comparison of a dynamically pitching non-flapped 0012 airfoil, and c) lift comparison of a dynamic pitching and oscillating flapped 0012 airfoil. …

Teaching Sustainability In Cal Poly Electrical And Computer Engineering Programs, David Braun, Art Maccarley, John Oliver

Electrical Engineering

No abstract provided.

Applications Of Variation Analysis Methods To Automotive Mechanisms, Robert C. Leishman

Theses and Dissertations

Variation analysis, or tolerance analysis as it is sometimes called, is typically used to predict variation in critical dimensions in assemblies by calculating the stack-up of the contributing component variations. It is routinely used in manufacturing and assembly environments with great success. Design engineers are able to account for the small changes in dimensions that naturally occur in manufacturing processes, in equipment, and due to operators and still ensure that the assemblies will meet the design specifications and required assembly performance parameters. Furthermore, geometric variation not only affects critical fits and clearances in static assemblies, it can also cause variation …

Multiscale Modeling Of Glass Fiber Reinforced Viscoelastic Polymers Subjected To Impact Loads, Victor Ferreira Teixeira

Department of Engineering Mechanics: Dissertations, Theses, and Student Research

New applications for polymer composite materials are occurring at a rapid pace today. These include structural components in the energy, transportation, and biomedical fields.  Many if not all of these new applications will require that part performance is insured with some degree of sustainable damage.  With the growth in the use of composite structures comes the necessity of improved methodologies that can predict more accurately the life and serviceability conditions of composite parts. Damage mechanics in two-phase composite materials is a very complex problem that has challenged researchers for many years. However, most of the available models perform only a …

Nonlinear-Optical Studies Of A Fluorinated Poled Polyimide Guest-Host System, S. F. Hubbard, K. D. Singer, F. Li, Stephen Z. D. Cheng, F. W. Harris

College of Polymer Science and Polymer Engineering

We report on poling of a low dielectric constant preimidized fluorinated fully aromatic guest-host polyimide nonlinear optical material including thermal stability of optical nonlinearities and waveguiding properties. We measured a second-harmonic coefficient (d33 = 4.9 +/- 0.5 pm/V at 1217 nm fundamental wavelength) which is accurately predicted by a thermodynamic model of poled polymers. The optical nonlinearity of a poled sample was thermally stable at 80-degrees-C for over 300 h. Films were observed to have negative birefringence. Optical losses for slab waveguides in lowest order TE and TM modes were greater-than-or-equal-to 7.7 dB/cm for doped waveguides at 800 nm wavelength …

Radial Ebg Cell Layout For Gps Patch Antennas, Giuseppe Ruvio, Max Ammann, Xiulong Bao

Articles

A novel radial layout for mushroom-like electromagnetic-bandgap (EBG) cells surrounding a printed circularly-polarised patch antenna is proposed. Two radial EBG configurations surrounding a circular patch are compared to a reference patch on a conventional ground plane of the same dimension. The radial shape and displacement of the EBG cells around the patch offers improvements in terms of gain and axial-ratio compared to the reference antenna and is more suitable for circular geometries compared to conventional Cartesian layouts. In particular, the distance between the patch and the surrounding EBG cells is independent of the cell period, which can be arbitrarily chosen, …

Mode Pattern Analysis Of Gallium Nitride-Based Laser Diodes, Xiaomin Jin, Sean Jobe, Simeon Trieu, Benafsh Husain, Jason Flickinger, Bei Zhang, Tao Dai, Xiang-Ning Kang, Guo-Yi Zhang

Electrical Engineering

In this paper, we present an analysis of gallium nitride (GaN) quantum-well (QW) laser diode (LD) by numerical simulation. Here we discuss three aspects that are crucial to our analysis. First, the transverse mode pattern is studied, and our current GaN diode laser structure is discussed with optical waveguide mode analysis. Then we compare the QW design of the laser and maximize laser modal gain. Finally, we report the influence of the electron block (e-block) layer on lasing performance of our design.

International Study Abroad In Engineering/Industrial Technology: Through The Eyes Of Students, Michael Dyrenfurth, Robert Herrick, Donal Mchale, Richard Hayes, James Barnes

Conference papers

Faculty and programs in engineering/industrial technology often promote international exchange and study abroad as a desirable component of a university experience— particularly in this increasingly globalized world. But, what do students who have actually had such experiences perceive? How do they view such experiences, before, during and after the event? The following paper evolved from the experiences of four universities collaborating on an EU-FIPSE funded Atlantis project called DETECT that consist of the partnerships of four Engineering/Technology Educational institutions; Hochschule Darmstadt in Germany, Technological University Dublin in Ireland, and Pennsylvania State University & Purdue University from the USA.

Using Timed-Release Cryptography To Mitigate The Preservation Risk Of Embargo Periods, Rabia Haq, Michael L. Nelson

Computer Science Presentations

PDF of a powerpoint presentation from the 2009 ACM/IEEE Joint Conference on Digital Libraries, Austin, Texas, June 15-19, 2009. Also available on Slideshare.

Using Abet Assessment Requirements As A Catalyst For Change: Enhancing And Streamlining The Engineering Management Undergraduate Program At Missouri S&T, Stephen A. Raper, Susan L. Murray, Christa Moll Weisbrook, William Daughton

Engineering Management and Systems Engineering Faculty Research & Creative Works

The Engineering Management (EM) undergraduate degree program at Missouri University of Science & Technology (formerly University of Missouri-Rolla) was the first program of its kind. The program started over 40 years ago and it is one of only five ABET accredited undergraduate EM programs [1]. The initial degree program included a senior year of management courses in conjunction with three years of courses in common engineering disciplines such as mechanical, electrical, and civil engineering. In the 1990s the program underwent a major restructure and students combined core engineering management classes with an emphasis area inside the department. Industrial, manufacturing, packaging, …

East Bay Energy Consortium Legal Subcommittee Meeting Minutes, June 15, 2009, East Bay Energy Consortium

East Bay Energy Consortium Meeting Minutes

No abstract provided.

Effectiveness Of Florida's Residential Energy Code: 1979-2009 (Revision Of 1979-2007 Report), Florida Solar Energy Center, Philip W. Fairey

FSEC Energy Research Center®

The 2007 Florida Legislature authorized the Florida Building Commission (FBC) and Department of Community Affairs (DCA) to evaluate cost effectiveness of energy conservation measures including appliance efficiencies that could be implemented through the Florida Energy Code for certain buildings. Additionally, Governor Crist's Executive Order #07-127 requires the Secretary of DCA to convene the Florida Building Commission for the purposes of revising the Florida Energy Code for Building Construction to increase the energy performance of new construction in Florida by at least 15% from the 2007 Energy Code. The Commission should consider incorporating standards for appliances and standard lighting in the …

Studies Of Tumbling Motion Generated During Intake In A Bowl-In-Piston Engine, Wen-Cheng Huang

Journal of Marine Science and Technology–Taiwan

Approaching flood can be likened to a oncoming missile, and flood routing is viewed as to build an anti-missile system. The applications of the Kalman filter to hydrologic models are not suitable. The Kalman filter fails to yield totally effective predictions in the hydrologic routing by the fact that any specific objective (peakflow) cannot be designated in advance. Without predetermined objectives, the predicted flows cannot catch the real values but follow the traces of the real hydrograph.

Analysis Of Maximum Wind Force For Offshore Structure Design, Jing-Jong Jang, Guo Jyh-Shinn

Journal of Marine Science and Technology–Taiwan

This paper presents the results of a study in which a method is developed for estimating maximum turbulent wind drag force acting on a floating offshore structure with low natural frequency. In evaluating the drag force, forces associated with turbulent wind speeds are considered using both the linear and nonlinear reliability analysis approaches. A mathematical wind spectral density formulation is employed. The probability density function applied for the maximum turbulent wind-induced drag force analysis is considered as a random process. The maximum wind force is analytically developed by using an approximate single term expression for the functional relationship between the …