Engineering Commons^™

Test 1854: John Deere 4520 Ehydro Diesel Hydrostatic, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA

The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data.

EXPLANATION OF THE TEST PROCEDURES

Purpose

The purpose of …

Nebraska Summary 571: Case-Ih Jx1085c Diesel 16-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA

The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data.

EXPLANATION OF THE TEST PROCEDURES

Purpose

The purpose of …

Delay-Constrained Transmission Of Fine Scalable Coded Content Over P2p Networks, Xiao Su, Yi Shang, Tao Wang, Yuqing Mai

Faculty Publications

Images or videos are generally coded before transmission, and they can be either non-scalable coded or scalable coded, which can be further classified into fine-scalable coded and coarse-scalable coded. In this paper, we focus on delivery of fine-scalable coded content. The objective of our work is to design algorithms to optimize the quality of fine-scalable coded images or videos on peer-to-peer networks when a requesting peer is delay-sensitive and has to display content within a certain delay bound. Fine-scalable coding has two properties: (1) it embeds lower bit-rate bitstreams into higher bit-rate bitstreams; and (2) its coding quality increases with …

Machine Vision Course For Manufacturing Engineering Undergraduate Students, Jose Macedo, Kurt Colvin, Daniel Waldorf

Industrial and Manufacturing Engineering

A 10-week course was designed with funding from the Society of Manufacturing Engineers (SME) and input from industry representatives, to offer upper division engineering students a course on advanced automation. The objective was to provide engineering students theoretical and hands-on practical experience with automation technologies that will be of prime importance over the next decade: data acquisition and instrumentation, machine vision and motion control. This paper describes the machine vision portion of that class. It describes important concepts, hands-on equipment, and labs developed for this course, as well as examples of student projects from Spring Quarter, 2004. The course and …

Online Multimedia Communication System, Yin-Wei Yang

Theses Digitization Project

Online Multimedia Communication System is a project aimed at providing people the ability to store and share their multimedia files. The users and administrator can modify and view the files and database information from a normal web browser. Furthermore, this site offers a secure environment to keep all the users' information private.

Thermal Analysis Of Gcls At A Municipal Solid Waste Landfill, J. L. Hanson, Nazli Yesiller, G. E. Swarbrick

Civil and Environmental Engineering

This study was conducted to determine long-term thermal regime of landfill liner systems using a field temperature monitoring program and numerical analysis of heat transfer. Temperatures in liner systems that contain geosynthetic clay liners (GCLs) were monitored prior and subsequent to waste placement. Data were collected in three cells at a landfill in Midwestern USA for more than five years. The liner system in one of the cells was left exposed (not covered with waste) for a period exceeding one year subsequent to cell construction. The lowest and highest GCL temperatures were –1°C and 35°C, respectively and the localized temperature …

Anaheim Advanced Traffic Control System Field Operational Test: Technical Evaluation Of Scoot, James E. Moore Ii, C. Arthur Maccarley, Stephen Mattingly, Michael G. Mcnally

Electrical Engineering

This article provides a technical evaluation of the traffic control element of the Anaheim Advanced Traffic Control System Field Operations Test (FOT), sponsored by the US Department of Transportation. The primary objective for this test was the evaluation of adaptive traffic signal control technologies, including the Split Cycle and Offset Optimization Technique (SCOOT) for intersection signal control. The SCOOT evaluation was defined relative to existing, first generation Urban Traffic Control System (UTCS)-based control using standard US field detectorization. This US geometry is not the detector configuration normally used with SCOOT. SCOOT was implemented with some degree of success, though technical …

Lead-Free Solder Joint Reliability – State Of The Art And Perspectives, Jianbiao Pan, Jyhwen Wang, David M. Shaddock

Industrial and Manufacturing Engineering

There is an increasing demand for replacing tin-lead (Sn/Pb) solders with lead-free solders in the electronics industry due to health and environmental concerns. The European Union recently passed a law to ban the use of lead in electronic products. The ban will go into effect in July of 2006. The Japanese electronics industry has worked to eliminate lead from consumer electronic products for several years. Although currently there are no specific regulations banning lead in electronics devices in the United States, many companies and consortiums are working on lead-free solder initiatives including Intel, Motorola, Agilent Technologies, General Electric, Boeing, NEMI …

Undergraduate Course In Environmental Design And Manufacturing, Andrew S. Borchers, Trevor S. Harding, Terri Lynch-Carls, Benjamin Redekop, Craig Hoff, Jackie El-Sayed, Daryl Doyle

Materials Engineering

This paper is a progress report on the development of an undergraduate course in environmental design and manufacturing. The importance of the topic is clear from National Academy of Engineering statements regarding the need to incorporate content on sustainable technology. The multidisciplinary team includes academic faculty from engineering, science, liberal studies, and business in collaboration with industry partners. The team's approach is to create a case-based course by adapting existing educational modules from Ford Motor Company. The group has received National Science Foundation funding for this project (DUE-0511322), and the project is currently in its beginning phases.

Comparison Of Measured And Fao-56 Modeled Evaporation From Bare Soil, Andrew J. Mutziger, Charles M. Burt, Daniel J. Howes, Richard G. Allen

BioResource and Agricultural Engineering

This paper evaluates how well the FAO-56 style soil water evaporation model simulates measurements of evaporation (E) from bare soil. Seven data sets were identified from the literature and in all but one case, the individuals who took the measurements were contacted and they provided the writers with specific weather and soils data for model input. Missing weather and soils data were obtained from online sources or from the National Climatic Data Center. Simulations for three possible variations of soil data were completed and compared. The measured and the FAO-56 simulated E/ETo and cumulative evaporation trends and …

Evaporation Research: Review And Interpretation, Charles M. Burt, Andrew J. Mutziger, Robert G. Allen, Terry A. Howell

BioResource and Agricultural Engineering

Literature regarding evaporation from soil, wet plant surfaces, and sprinkler droplets was examined, normalized, and interpreted. Much of the evaporation literature is difficult to compare and interpret; this paper offers comparisons and discussions of various findings by others as well as by the writers. Techniques of measuring and estimating evaporation from irrigation and rainfall are discussed. The partitioning between increased evaporation and decreased transpiration from a variety of research is quantified. Factors that impact the various forms of evaporation are listed and quantified. This review and summary will provide practitioners and researchers with theoretical and practical guidance on measurement techniques …

2004/05 Research And Development, College Of Engineering And Applied Sciences

Electrical and Computer Engineering Newsletter

• Radio Frequency Identification (RFID)
• Integrated Smart Wireless SAW Sensors and Systems
• Early Detection of Prostate Cancer
• Steam Trap Acoustic/Ultrasonic Analysis
• Micromachined Wireless Dosimeters for In-Situ Radiation Measurement
• Nanowires and Nanoparticles Microsensors
• Mechanical and electrical characterization of b-Ga2O3 nanostructures for sensing applications
• Interdisciplinary Research with the Occupational Therapy Department

A Multiple-Objective Decision Analysis Of Stakeholder Values To Identify Watershed Improvement Needs, Jason R. W. Merrick, Gregory S. Parnell, Jamison Barnett, Margot Garcia

Statistical Sciences and Operations Research Publications

The paper describes the use of multiple objective decision analysis to qualitatively and quantitatively assess the quality of an endangered watershed and guide future efforts to improve the quality of the watershed. The Upham Brook watershed is an urban watershed that lies at the interface of declining inner city Richmond, Virginia and growth-oriented Henrico County. A section of stream within the watershed has been identified as so dangerously polluted that it threatens the health of the residents who live within the watershed boundaries. With funding provided by the National Science Foundation, the Upham Brook watershed project committee was formed to …

Value Stream Mapping For The Core Department In Foundry Of A Tractor Manufacturing Firm, Narendra Bhati

Graduate Research Papers

A value stream is all the actions required to bring a product through the main flows essential to every product. It begins at the "door-to-door" production flow level and allows you to see the entire picture. It identifies waste and the sources of waste. Provides a common language and questions current decisions that happen by default. It eliminates bias improvement picking. It links material and information flow and gives a qualitative description of how your facility should operate.

An excellent spot for observing the value stream is the aisle of the supermarket. for it is here that a thousand streams …

Medical Technology: Contexts And Content In Science And Technology, Michael A. De Miranda, Mark Doggett, Jane T. Evans

Architectural and Manufacturing Sciences Faculty Publications

No abstract provided.

Dlpconvert: Converting Owl Dlp Statements To Logic Programs, Boris Motik, Denny Vrandecic, Pascal Hitzler, York Sure, Rudi Studer

Computer Science and Engineering Faculty Publications

In the past few years, the W3C has been establishing standards for the fundamental building blocks of the Semantic Web. With RDF a common data model has been provided. A major step was the introduction of the ontology definition languages RDFS—offering very basic semantics—and the Web Ontology Language OWL As these standards are still very new, only a limited support of tools for inferencing and querying exists. Still, the availability of such tools will be crucial for the development of the Semantic Web.

Effects Of Food Attributes And Feeding Environment On Acceptance, Consumption And Body Weight: Lessons Learned In A Twenty-Year Program Of Military Ration Research, Edward S. Hirsch, F. Matthew Kramer, Herbert L. Meiselman

United States Army: Publications

Twenty years of testing in the field has consistently revealed that food intake is inadequate when packaged military rations are fed as the sole source of food. Food intake is much lower and there is a loss of body weight. Conversely when these rations are fed to students or military personnel for periods ranging from 3 to 42 days in a cafeteria-like setting, food intake is comparable to levels of a control group provided with freshly prepared food. Under these conditions, body weight is maintained. In this review, the consumption pattern is considered in terms of characteristics of the food …

The Influence Of Ammonia And Carbon Dioxide On The Sorption Of A Basic Organic Pollutant To A Mineral Surface, Maneerat Ongwandee, Glenn Morrison, S. S. Bettinger

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Indoor surfaces have a sorptive capacity for organic pollutants which may be significantly influenced by other gases and the pH of the surface. in this research, we examine the influence of a common indoor gaseous acid, CO₂, and base, NH₃, on the adsorption of a volatile organic base, trimethylamine (TMA), to a mineral surface, zirconium silicate beads. Varying ammonia and CO₂ within concentration ranges of indoor relevance substantially influences the sorptive capacity of this mineral surface. Increasing the CO₂ mixing ratio to 1000 p.p.m. enhances surface capacity of TMA by 40-50%; increasing the NH3 …

An Electro-Oculogram Based System For Communication And Control Using Target Position Variation, Ronan Fitzmaurice, Ted Burke, Annraoi De Paor

Conference Papers

In this paper we describe a novel mode of human computer interaction based on gaze tracking using the electro-oculogram (EOG). Despite the relative simplicity of recording this signal, it is often discounted as a reliable method of gaze tracking because of problems arising from changing sensitivity and DC drift. We describe an original technique, Target Position Variation (TPV), which addresses this issue by presenting moving icons which, when followed with the eye, create a corresponding pattern in the EOG signal which can be used to infer the correct gaze position and to compensate for variations in sensitivity.

Onset Detection Using Comb Filters, Mikel Gainza, Bob Lawlor, Eugene Coyle

Conference papers

A technique for detecting note onsets using FIR comb filters which have different filter delays is presented. The proposed onset detector focuses on the inharmonic characteristics of the onset component and the energy increases of the signal. Both properties are combined by utilising FIR comb filters on a frame by frame basis in order to obtain an onset detection functions, which is suitable for detecting slow onsets. The proposed approach improves upon existing methods in terms of the percentage of correct detections in signal processing.

Non-Negative Tensor Factorisation For Sound Source Separation, Derry Fitzgerald, Matt Cranitch, Eugene Coyle

Conference papers

An algorithm for Non-negative Tensor Factorisation is introduced which extends current matrix factorisation techniques to deal with tensors. The effectiveness of the algorithm is then demonstrated through tests on synthetic data. The algorithm is then employed as a means of performing sound source separation on two channel mixtures, and the separation capabilities of the algorithm demonstrated on a two channel mixture containing saxophone, strings and bass guitar.

Experimental And Numerical Investigation Of Therapeutic Ultrasound Angioplasty, Graham Gavin, M.S. J. Hashmi, Garrett B. Mcguinness

Other resources

Therapeutic ultrasound angioplasty is an emerging minimally invasive cardiovascular surgical procedure that involves the delivery of ultrasonic displacements to the distal-tip of small diameter wire waveguides. The ultrasonic distal-tip displacements affect atherosclerotic plaque and thrombus by direct contact ablation, pressure wave components and cavitation, in addition to an acoustic streaming event around the distal-tip. This study uses experimental and numerical methods to investigate ultrasonic displacements in wire waveguides and the effect the distal-tip displacements have on the surrounding fluid. An experimental therapeutic ultrasound wire waveguide apparatus is described that delivers displacements to the distal-tip of 1.0 mm and tapered 0.35 …

A New Architecture For A Multi Polarized Perpendicularly-Fed Radiating Element, Naftali Herscovici, Francisco Lerma, Max Ammann

Conference papers

Planar printed antennas are often required to be fed by parallel feed-networks, which, when printed on the same substrate as the radiating elements, create mutual coupling, spurious radiation and excite surface waves. This considerably affects the array efficiency. Numerous architectures were proposed in the past; some of them use the multilayer structure (which by itself exhibits low efficiency), or perpendicularly fed structures. The latter consist of a substrate for the radiating element and another substrate which for the feed-network. The paper reviews some of the basic configurations proposed until now, and shows the specific improvements introduced by the proposed architecture.

Literature Survey Of Wind Turbine Aeroelastic Stability, Scott M. Larwood

All Faculty Reports - School of Engineering and Computer Science

A literature survey of wind turbine aeroelastic stability is presented. The subject received early interest as the emergent wind industry looked to lessons from the helicopter industry. There has not been a utility-scale turbine with flutter problems, but there is a concern over the behavior of larger, more flexible turbines. Blades of innovative design with bend-twist coupling and tip sweep are also a concern. Much of the aerodynamic modeling was formulated in the 1930s by Theodorsen. Modern authors have developed finite element structural models for eigenvalue solutions to the stability models. Calculations for a 1.5 MW turbine blade with bend-twist …

Governors Highway Safety Associations And Transportation Planning: Exploratory Factor Analysis And Structural Equation Modeling, Sudeshna Mitra, Simon Washington, Eric Dumbaugh, Micael D. Meyer

Civil and Environmental Engineering

The Intermodal Surface Transportation Efficiency Act (ISTEA) of 1991 mandated the consideration of safety in the regional transportation planning process. As part of National Cooperative Highway Research Program Project 8-44, "Incorporating Safety into the Transportation Planning Process," we conducted a telephone survey to assess safety-related activities and expertise at Governors Highway Safety Associations (GHSAs), and GHSA relationships with metropolitan planning organizations (MPOs) and state departments of transportation (DOTs). The survey results were combined with statewide crash data to enable exploratory modeling of the relationship between GHSA policies and programs and statewide safety. The modeling objective was to illuminate current hurdles …

Cheating In College And The Workplace: An Examination Of Engineering Undergraduates' Ethical Behavior, Trevor S. Harding, Donald D. Carpenter, Cynthia J. Finelli

Materials Engineering

Research has demonstrated that engineering undergraduates report higher rates of cheating than those in other disciplines and that students who cheat in college are more likely to make unethical decisions as professionals. Therefore, better understanding the decision-making processes of engineering students and professionals who engage in dishonest behavior could lead to effective college-level interventions to cheating that have a positive impact on the ethical behavior of future professionals. To explore the relationship between academic and professional ethical behavior, the authors launched the Work Experience Study (WES) that examines students’ decision-making in situations where they are tempted to engage in unethical …

Prediction Accuracy For Projectwide Evapotranspiration Using Crop Coefficients And Reference Evapotranspiration, Richard G. Allen, Albert J. Clemmens, Charles M. Burt, Ken Solomon, Tim O'Halloran

BioResource and Agricultural Engineering

The Imperial Irrigation District is a large irrigation project in the western United States having a unique hydrogeologic structure such that only small amounts of deep percolation leave the project directly as subsurface flows. This structure is conducive to relatively accurate application of a surface water balance to the district, enabling the determination of crop evapotranspiration (ET_c) as a residual of inflows and outflows. The ability to calculate ET_c from discharge measurements provides the opportunity to assess the accuracy and consistency of an independently applied crop coefficient—reference evapotranspiration (K_c ET₀) procedure integrated over …

The Limits Of Reflexive Design In A Secrecy-Based Organization, Michael W. Stebbins, Tali Freed, A.B. (Rami) Shani, Kenneth H. Doerr

Industrial and Manufacturing Engineering

No abstract provided.

Spatiotemporal Variation Of Risk Preceding Crashes On Freeways, Anurag Pande, Mohamed Abdel-Aty, Liang Hsia

Civil and Environmental Engineering

Research into the application of freeway loop detector data for traffic safety has gained momentum in recent years. The incompleteness of data from loop detectors has been a common problem in both the development and the implementation of models. The effect of individual crash precursors, obtained one at a time from a series of loop detectors, on relative risk of crash occurrence was examined through within-stratum one-covariate logistic regression models. The hazard ratio (resultant change in log odds of observing a crash by changing the covariate by one unit) was used as the measure of risk. The log of coefficient …

Split Models For Predicting Multivehicle Crashes During High-Speed And Low-Speed Operating Conditions On Freeways, Mohamed Abdel-Aty, Nizam Uddin, Anurag Pande

Civil and Environmental Engineering

The future of traffic management and highway safety lies in proactive traffic management systems. Crash prediction models that use real-time traffic flow variables measured through a series of loop detectors are the most important component of such systems. A previous crash prediction model was developed with the matched case-control logistic regression technique. Although the model achieved reasonable classification accuracy, it remained open to improvement because of the limited study area, sample size, and transferability issues. Therefore, the previous work had been extended. Multivehicle freeway crashes under high- and low-speed traffic conditions were found to differ in severity and in their …