Engineering Commons^™

Lessons Learned And Best Practices For Using An Analytic Strategy Approach For The Creation Of Virtual Laboratories For Distance Learning In Engineering Technology, Anthony W. Dean, Carol L. Considine, Gary R. Crossman

Engineering Technology Faculty Publications

This paper describes the use of an Analytic Strategy Approach used in the development of a Virtual Automation and Controls Lab in the Mechanical Engineering Technology Program of the Engineering Technology Department at Old Dominion University. This paper looks at the three phases, as applied to the development of a virtual lab using an analytic strategy design:

(1) Formulation of the quantitative and qualitative approach to assist in decision process,

(2) Quantitative and qualitative analysis of the decision alternatives - within the decision context,

(3) Interpretation of the analysis results and implications for decision.

Privatization Initiatives: A Source For Engineering Economy Case Studies, Paul Kauffmann, Tarek Abdel-Salam, Keith Williamson, Carol L. Considine

Engineering Technology Faculty Publications

A case study method which reviews the basic structure of the circular A-76 privatization decision model is discussed. It highlights the possibilities for development of case studies that can challenge student teams to apply engineering economy tools while developing skills in a range of circular areas that are important to undergraduate engineering education and career success in engineering practice. Beyond building quantitative and qualitative business analysis skills, engineering economy cases can enhance student skills in other topical areas such as technical presentations, and report writing. The privatization initiatives and related decision models can also enhance human relations oriented skills in …

Automatic Generation Of Social Network Data From Electronic-Mail Communications, Jason Yee, Robert F. Mills, Gilbert L. Peterson, Summer E. Bartczack

Faculty Publications

Most organizations have formal and informal elements. Formal structures are usually documented in organizational charts showing chain of command, levels of authority, and personnel resources. The actual effectiveness of the organization or specific individuals may actually depend on informal structures and internal communication networks. These are by definition personality-dependent and may provide significant insight into how work actually gets done within the organization. Effective leaders will want insight into these informal structures for various reasons. Inefficient decision-making or staffing processes may result in unnecessary or redundant communications, chokepoints, or single points of failure, each of which can either delay decisions …

Effects Of Pressure On Coal Pyrolysis And Char Morphology, Dong Zeng, Thomas H. Fletcher

Faculty Publications

A better understanding of high-pressure coal pyrolysis is needed to design advanced coal gasification combined-cycle systems. High-temperature, high-heating-rate, and high-pressure pyrolysis experiments were conducted on three bituminous coals and a lignite, to more fully understand the effects of pressure on resultant char properties. A flat-flame burner was designed and used inside a high-pressure drop-tube reactor to provide a high-temperature, high-heatingrate environment that is representative of industrial processes. Chars were prepared at four different pressures, ranging from 0.85 atm to 15 atm. The measured total volatiles yields compared well with predictions of the Chemical Percolation Devolatilization (CPD) model. The physical properties …

Simulated Land-Based Turbine Deposits Generated In An Accelerated Deposition Facility, Jared W. Jensen, Sean W. Squire, Jeffrey P. Bons, Thomas H. Fletcher

Faculty Publications

This report presents a validation of the design and operation of an accelerated testing facility for the study of foreign deposit layers typical to the operation of land-based gas turbines. This facility was designed to produce turbine deposits in a 4-h test that would simulate 10,000 h of turbine operation. This is accomplished by matching the net foreign particulate throughput of an actual gas turbine. Flow Mach number, temperature and particulate impingement angle are also matched. Validation tests were conducted to model the ingestion of foreign particulate typically found in the urban environment. The majority of this particulate is ceramic …

Efficient Capacity-Based Antenna Selection For Mimo Systems, Michael A. Jensen, Matthew L. Morris

Faculty Publications

The achieved capacity of the multiple-input-multiple-output wireless channel is typically dependent on the array configurations at the transmitter and receiver. Maximizing system capacity or throughput therefore requires that the arrays adapt to changing channel conditions, which may be accomplished by selecting an appropriate subset of available antenna elements for connection to the electronic transmit and receive modules. This work presents algorithms, derived using relatively straightforward information theoretic considerations, for efficiently and effectively selecting the antenna elements. Computational examples using a realistic channel model for indoor environments illustrate the performance of the techniques.

Network Model For Mimo Systems With Coupled Antennas And Noisy Amplifiers, Michael A. Jensen, Matthew L. Morris

Faculty Publications

This work presents a framework for the analysis of mutually-coupled antennas in a multiple-input multiple-output system. The approach uses network theory to formulate the transfer matrix relating the signals input to the transmit antennas to the signals at the output of the receiver front end. This transfer function includes the coupled transmit and receive antennas, the multipath propagation channel, the receiver matching network, and a realistic noise model for the receive amplifiers. Application of the formulation to coupled dipole antennas characterized using full-wave electromagnetic analysis illustrates the performance gains possible from matching the coupled antenna/receive amplifier subsystem for minimum noise …

Mechanism Of Targeted Chemotherapeutic Delivery Using Ultrasound, Thaidra A. Gaufin, Byron K. Murray, Seiga Ohmine, Kim L. O'Neill, William G. Pitt, Briant S. Stringham

Faculty Publications

Ultrasound (US) is used to enhance and target delivery of drugs and genes to cancer tissues. The advantages of focused delivery to select tissues are manifold, but the exact mechanisms are largely unknown and need clarification to optimize delivery. The present study further defined the role of collapse cavitation in US-induced permeabilization of cell membranes and subsequent drug or gene uptake by the cell. Cavitation, defined as the collapse of micro-bubbles, produces high shear stresses and shock waves that may transiently puncture cell membranes and has been suggested as the cause of increased permeability. The hypothesis that collapsing bubbles permeabilize …

Observations Of Flame Behavior In A Laboratory-Scale Premixed Natural Gas/Air Gas Turbine Combustor From Planar Laser Induced Fluorescence Measurements Of Oh, Laser Doppler Anemometer Velocity Measurements, And Coherent Anti-Stokes Roman Spectrometer Temperature Measurements, Thomas H. Fletcher

Faculty Publications

Instantaneous planar laser induced fluorescence (PLIF) images of OH, simultaneous axial/radial and axial/tangential velocity measurements with an LDA (laser Doppler anemometer), and instantaneous gas temperature measurements using a coherent anti- Stokes Raman spectrometer (CARS) were obtained in a pre-mixed, swirl-stabilized laboratory-scale combustor, fired with natural gas. Four operating conditions were examined (two swirl conditions and equivalence ratios of 0.80 and 0.65). The instantaneous PLIF images of OH illustrate the chaotic nature of the turbulent flame eddies. Mean and standard deviations of each variable were measured at different locations in the flame, along with probability density functions. Stability of the flame …

Coordination Variables, Coordination Functions, And Cooperative Timing Missions, Randal Beard, Timothy W. Mclain

Faculty Publications

Sponsorship: AFOSR, DARPA. This paper presents a solution strategy for achieving cooperative timing among teams of vehicles. Based on the notion of coordination variables and coordination functions, the strategy facilitates cooperative timing by requiring acceptably low levels of communication and computation. The application of the coordination variable/function approach to trajectory planning problems for teams of unmanned air vehicles with timing constraints is described. Three types of timing constraints are considered: simultaneous arrival, tight sequencing, and loose sequencing. Simulation results demonstrating the viability of the approach are presented.

Autonomous Vehicle Technologies For Small Fixed-Wing Uavs, Randal Beard, Derek Kingston, Morgan Quigley, Deryl Snyder, Reed Christiansen, Walt Johnson, Timothy Mclain, Michael A. Goodrich

Faculty Publications

The objective of this paper is to describe the design and implementation of a small semi-autonomous fixed-wing unmanned air vehicle. In particular we describe the hardware and software architectures used in the design. We also describe a low weight, low cost autopilot developed at Brigham Young University and the algorithms associated with the autopilot. Novel PDA and voice interfaces to the UAV are described. In addition, we overview our approach to real-time path planning, trajectory generation, and trajectory tracking. The paper is augmented with movie files that demonstrate the functionality of the UAV and its control software.

Modeling And Simulation To Investigate Effects Of Static Mixer, Carrier Gas, Temperature And Pressure On The Mixing Ratio Of Carbon Nanotubes Growth Reactors, David Addie Noye

Dissertations and Theses @ UNI

The problem of this study was to investigate the effects of static mixer, carrier gas, carrier gas inlet pressures, and reactor operating temperatures on the mixing ratio of carbon nanotube synthesizing reactor. The methodology included design of static mixers, mathematical modeling, and computer modeling and simulation experiments.

The simulation experiment was performed based on single phase carrier gas modeling due to difficulty and time for three phase fluid modeling. First only nitrogen carrier gas in addition to the other three factors under constant inlet flow velocity and inlet temperature was simulated. Secondly, the same procedure was applied to argon carrier …

Perceived Importance Of National Occupational Cadd Skill Standards Among Faculty Of Nait Accredited Institutions, Ronald Shava

Dissertations and Theses @ UNI

This study presents a descriptive survey that examined the importance and relevance of National Occupational CARD Skills based on the perceptions of faculty teaching at National Association of Industrial Technology (NAIT) accredited institutions. The major goal of the study was to determine what National Occupational CADD Skill Standards are relevant and important to faculty teaching CARD courses. The study was also designed to determine ratings of the perceived importance and relevance of National Occupational CADD Skill Standards by faculty teaching CADD courses at NAIT accredited institutions based on their area of specialization, professional ranking, and teaching experience. This study provided …

Inventory Simulation And Optimization Using System Dynamics, Structural Modeling Equations And Genetic Algorithms In The Drivetrain Division Of An Automotive Manufacturer, Marco Sisfontes-Monge

Dissertations and Theses @ UNI

Strategic planning and control are among the most critical activities that modern enterprises require to succeed in the global economy. This research is an original study that investigated the combination of tools and methodologies in order to apply them to a midwestern tractor manufacturer. The current study identified the constraints applicable to a polishing line in the Drivetrain Division of a major tractor manufacturer interested in exploring alternative techniques to improve its worldwide manufacturing operations.

The specific questions that this project tried to respond are stated as follows:

1. What were the most important variables that affected inventory levels of an …