Engineering Commons^™

Application Of Metagenomic And Molecular Microbiology Techniques To Elucidate Sources Of Fecal Pollution And Anthropogenic Antibiotic Resistance Genes To Surface Water: A Step Towards A “One Health” Approach To Watershed Management, Mehedi Hasan Tarek

Graduate Theses, Dissertations, and Problem Reports

The use of fecal indicator bacteria, such as Escherichia coli, is a widely established regulatory and monitoring practice to detect surface water contamination associated with fecal pollution. However, the detection or quantification of fecal indicator bacteria alone does not accurately inform the sources of fecal pollution. The development of molecular and metagenomic methods that target the DNA of microorganisms has resulted in a host of new tools for monitoring fecal pollution and its sources, as well as for understanding emerging microbial threats, such as antimicrobial resistance. Antimicrobial resistance is a critical “One Health” challenge presenting a high risk to …

Optimizing Sample Collection And Data Interpretation For Effective Wastewater-Based Epidemiology In Combined Sewer Systems, Christopher Allen Anderson

Graduate Theses, Dissertations, and Problem Reports

COVID-19 has spurred growth in the science surrounding wastewater-based epidemiology (WBE) pertaining to the detection of severe acute respiratory virus 2 (SARS-CoV-2) in waste streams as an early warning signal for public health. However, the highly variable wastewater environment has made it difficult to standardize an approach for sampling and analysis, especially in locations using combined sewer infrastructure. This study addresses knowledge gaps of WBE via three specific aims: (1) to compare diurnal fluctuations of SARS-CoV-2 and the human fecal indicator, pepper mild mottle virus (PMMoV) in wastewater treatment plant (WWTP) influent samples collected during dry versus wet weather conditions; …

Analysis Of The Psychological And Production Effects Of The Use Of Gamification For Manufacturing Assembly, Makenzie Dolly

Graduate Theses, Dissertations, and Problem Reports

In this dissertation, the applications of gamification for manufacturing with a focus on effects to workers and productivity were studied. Gamification is a relatively new research area, with the term being officially defined in 2010. Since then, several fields (education, health, and marketing) have benefitted from its application. Despite exhibiting strong potential, the application of gamification had remained rather unexplored in the manufacturing domain. To explore this further, by employing a comprehensive literature review, four research gaps were identified: the need for i) the use and acceptance of Deterding’s definition of gamification, ii) a clearer definition for various game element …

Accelerating Manufacturing Decisions Using Bayesian Optimization: An Optimization And Prediction Perspective, Taofeeq Olajire

Graduate Theses, Dissertations, and Problem Reports

Manufacturing is a promising technique for producing complex and custom-made parts with a high degree of precision. It can also provide us with desired materials and products with specified properties. To achieve that, it is crucial to find out the optimum point of process parameters that have a significant impact on the properties and quality of the final product. Unfortunately, optimizing these parameters can be challenging due to the complex and nonlinear nature of the underlying process, which becomes more complicated when there are conflicting objectives, sometimes with multiple goals. Furthermore, experiments are usually costly, time-consuming, and require expensive materials, …

Exploring Opportunities And Challenges Of Adopting Exoskeletons And Exosuits In Construction: Identifying Facilitators, Barriers, And Potential Solutions To Those Barriers, Dilruba Mahmud

Graduate Theses, Dissertations, and Problem Reports

Exoskeletons and exosuits (collectively termed as EXOs) have the potential to reduce the risk of work-related musculoskeletal disorders (WMSDs) by protecting workers from exertion and muscle fatigue due to physically demanding, repetitive, and prolonged work in construction workplaces. However, the use of EXOs in construction is in its infancy, and much knowledge for driving acceptance, adoption, and application of this technology is still lacking. This paper aims to identify the potential facilitators and barriers to adopting EXOs in the construction industry, along with potential solutions to those identified barriers to fostering the adoption of EXOs in construction workplaces through a …

Methane Emissions Produced By Pneumatic Devices And Produced Water Tanks On Natural Gas Wellsites, Benjamin William Thornton

Graduate Theses, Dissertations, and Problem Reports

Abstract

Methane Emissions Produced by Pneumatic Devices and Produced Water Tanks on Natural Gas Wellsites

Benjamin W. Thornton

In recent years, more scrutiny has been placed on the release of greenhouse gasses (GHGs) by the oil and gas industry in North America as climate concerns increase. In the coming years, stricter regulations proposed by the Environmental Protection Agency (EPA) concerning the release of GHGs will further direct attention to GHG emissions quantification, modeling, and overall reduction. Active natural gas wellsites employ production equipment that routinely emits methane during normal operation. Production equipment often includes, but is not limited to, gas …

Investigating The Change In Pavement Cracking Data Due To Automated Data Collection Methods, Faisal Quibria Chowdhury

Graduate Theses, Dissertations, and Problem Reports

Data collection on pavement surface cracks is crucial for the state Departments of Transportation (DOTs) to make informed decisions on maintenance, repair, and rehabilitation (MR&R) activities. The collected cracking data is translated into a pavement performance indicator to assess the condition of pavement sections and identify MR&R needs based on predetermined threshold values set by the state DOTs. State DOTs have transitioned from manual to automated data collection as automation offers many advantages over manual data collection, such as improved data collection rates, efficiency, cost reduction, and safety. As the state DOTs have integrated automated data into the pavement performance …

Investigation Of Oxidation And Corrosion Resistance Of Ni-Based Alloys And Stainless Steels Under Co2 Environments At Elevated Temperatures, Spencer Roy Fultineer

Graduate Theses, Dissertations, and Problem Reports

High mechanical strength integrity, high robustness towards oxidation, and high resistance to carburization under CO2 environments at elevated temperatures are usually required for metallic systems that are employed for power generation. INCONEL 625 is a nickel-based superalloy that started development in the 1950s. This material was designed with the distinct purpose of use in high-temperature and high-pressure systems. While various materials possess the physical properties to handle these conditions, the creation of IN625 addresses the need for a material to withstand the highly corrosive properties of these kinds of environments. In order to evaluate the oxidation and corrosion resistance of …

Modeling And Simulation Of A Process That Converts Ethane To Ethylene And Ethylene To Low Density Polyethylene, Ernest Bosire Mokaya

Graduate Theses, Dissertations, and Problem Reports

Ethylene is a critical feedstock and a major building block in the petrochemical industry that is used in synthesizing important products like polyethylene, ethanol, ethylene oxide, ethylene dichloride and ethylbenzene. With increasing demand of plastics, production of ethylene and subsequently polyethylene has increased globally. This thesis conducts the modeling and simulation of an integrated process that utilizes ethane as the primary feedstock to produce ethylene and the subsequent polymerization of ethylene to low-density polyethylene (LDPE). The process combines two different processes into one integrated process: (1) conversion of ethane to ethylene and (2) conversion of ethylene to LDPE. First, a …

Machine Learning Assisted Framework For Advanced Subsurface Fracture Mapping And Well Interference Quantification, Mohammad Faiq Adenan

Graduate Theses, Dissertations, and Problem Reports

The oil and gas industry has historically spent significant amount of capital to acquire large volumes of analog and digital data often left unused due to lack of digital awareness. It has instead relied on individual expertise and numerical modelling for reservoir development, characterization, and simulation, which is extremely time consuming and expensive and inevitably invites significant human bias and error into the equation. One of the major questions that has significant impact in unconventional reservoir development (e.g., completion design, production, and well spacing optimization), CO2 sequestration in geological formations (e.g., well and reservoir integrity), and engineered geothermal systems (e.g., …

A Comparative Analysis Of Coastdown Testing Methods From An Electric Drive Unit Engagement Perspective Using A Student-Designed Parallel Hybrid Electric Vehicle, Dawson Everett Dunnuck

Graduate Theses, Dissertations, and Problem Reports

Coastdown testing and road load determination are pivotal parts of the automotive design process. Vehicle manufacturers and independent companies perform and analyze road loads determined through a coastdown or similar method to determine a vehicle’s road load for modeling and EPA certification. For a traditional coastdown, the vehicle’s drivetrain must be disconnected through a clutch between the engine and the transmission while traveling at a high rate of speed to place the vehicle in neutral. This changes for hybrid and electric vehicles. Some hybrid, and most electric, vehicles delivered to customers do not have this clutch action to grant the …

Framework For Data Acquisition And Fusion Of Camera And Radar For Autonomous Vehicle Systems, Clay Edward Vincent

Graduate Theses, Dissertations, and Problem Reports

The primary contribution is the development of the data collection testing methodology for autonomous driving systems of a hybrid electric passenger vehicle. As automotive manufacturers begin to develop adaptive cruise control technology in vehicles, progress is being made toward the development of fully-autonomous vehicles. Adaptive cruise control capability is classified into five levels defined by the Society of Automotive Engineering. Some vehicles under development have attained higher levels of autonomy, but the focus of most commercial development is Level 2 autonomy. As the level of autonomy increases, the sensor technology becomes more advanced with a sensor suite which includes radar, …

Imitation Learning For Swarm Control Using Variational Inference, Hafeez Olafisayo Jimoh

Graduate Theses, Dissertations, and Problem Reports

Swarms are groups of robots that can coordinate, cooperate, and communicate to achieve tasks that may be impossible for a single robot. These systems exhibit complex dynamical behavior, similar to those observed in physics, neuroscience, finance, biology, social and communication networks, etc. For instance, in Biology, schools of fish, swarm of bacteria, colony of termites exhibit flocking behavior to achieve simple and complex tasks. Modeling the dynamics of flocking in animals is challenging as we usually do not have full knowledge of the dynamics of the system and how individual agent interact. The environment of swarms is also very noisy …

Stability Of Ruddlesden-Popper Phase Lanthanum Nickelate As Air Electrode For Reversible Solid Oxide Cells, Daniel De Lorenzo Moreira

Graduate Theses, Dissertations, and Problem Reports

This thesis studied the long-term stability of Ruddlesden-Popper phase Lanthanum Nickelate under operating conditions as the air electrode for Reversible Solid Oxide Cells (R-SOC). Renewable energies have gone through increase in popularity throughout the last decades, mainly due to the consequences of the rapid population growth in the world. These new energies have been pointed as the rightful successor of fossil fuel energies in order to decrease the environmental impact of our day-to-day life. Solid Oxide Fuel Cells as well as Solid Oxide Electrolysis Cells are believed to be the key to stabilizing the energy supply when environmental conditions are …

Missile Modeling And Simulation Of Nominal And Abnormal Scenarios Resulting From External Damage, James Manuel Floyd Iii

Graduate Theses, Dissertations, and Problem Reports

This thesis presents the development of a six-degree-of-freedom flight simulation environment for missiles and the application thereof to investigate the flight performance of missiles when exposed to external damage. The simulation environment was designed to provide a realistic representation of missile flight dynamics including aerodynamic effects, flight control systems, and self-guidance. The simulation environment was designed to be modular, expandable, and include realistic models of external damage to the missile body obtained by adversarial counteraction.

The primary objective of this research was to examine missile flight performance when subjected to unspecified external damage, including changes in trajectory, stability, and controllability, …

Deep Face Morph Detection Based On Wavelet Decomposition, Poorya Aghdaie

Graduate Theses, Dissertations, and Problem Reports

Morphed face images are maliciously used by criminals to circumvent the official process for receiving a passport where a look-alike accomplice embarks on requesting a passport. Morphed images are either synthesized by alpha-blending or generative networks such as Generative Adversarial Networks (GAN). Detecting morphed images is one of the fundamental problems associated with border control scenarios. Deep Neural Networks (DNN) have emerged as a promising solution for a myriad of applications such as face recognition, face verification, fake image detection, and so forth. The Biometrics communities have leveraged DNN to tackle fundamental problems such as morphed face detection. In this …

Multimaterial, Core-Shell Direct Ink Writing Of Flexible Strain Sensors For Pneumatically-Actuated Soft Robotic Hinge Joints, John Michael Burke

Graduate Theses, Dissertations, and Problem Reports

Direct ink writing (DIW) provides for an expansive material library and the ability to print multiple materials with tailored functionalities in a controllable and single-step process. Particularly beneficial is the net shape printing under ambient conditions of a wide range of materials normally incompatible with one another. Coaxial DIW is a 3D printing technique that allows for two dissimilar inks to be extruded simultaneously in a co-flow manner. In this work, custom-designed coaxial nozzles were 3D-printed using a stereolithography printer. Composite inks comprised of thermoplastic polyurethane and silver were developed and studied. The coaxial nozzles were then used to co-extrude …

Hydraulic Fracturing Treatment Optimization Using Machine Learning, Abdullah Johar

Graduate Theses, Dissertations, and Problem Reports

Friction reducers are chemicals used in hydraulic fracturing to reduce friction between fracturing fluid and the wellbore walls, helping to overcome tubular drag at high flow rates. High viscosity friction reducers are increasingly used due to operational and economic benefits, but their optimal concentration for each stage of fracturing is not well studied. As a result, oil and gas companies often use more friction reducers than necessary to ensure designed injection rates are achieved and to avoid screening out, resulting in excess use of FR and economic losses. The primary goal of this Thesis is to fully comprehend and quantify …

Identification Of Rockmass Deformation And Lithological Changes In Underground Mines By Using Slam-Based Lidar Technology, Francisco Eduardo Gil Hurtado

Graduate Theses, Dissertations, and Problem Reports

In mining, hazards causing rib and roof fall accidents generally develop with time. The development of a hazard depends on factors like geology, excavation geometry, overburden stress, and mining-induced stresses. Hazard mapping in an underground mine is essential for roof and rib stability assessment. However, often it is neither practical nor economical to inspect and map vast areas of mine workings with limited personnel. New technologies, recently, have been adopted in the mining industry that can solve this problem. Advances in LiDAR technology and simultaneous localization and mapping (SLAM) algorithms have led to the development of portable and mobile laser …

Frp Pedestrian Bridges, Joseph Ryan Virga

Graduate Theses, Dissertations, and Problem Reports

Advanced fiber-reinforced polymer (FRP) composites are being used as mainstream structural materials to build complex infrastructure systems. Such application of FRP composites can be attributed to their high strength-to-weight and stiffness-to-weight ratios, corrosion resistance, higher energy absorption, durability, and competitive life-cycle costs. FRP composites are increasingly being considered as suitable alternative structural materials to traditional construction materials such as timber, concrete, and steel.

In this work, detailed experimental investigation has been carried out on different types of glass FRP composite pedestrian bridges with FRP and/or timber deck. Four full-scale FRP pedestrian bridges, including 70`×8.5’ and 70’×10’ single-span bridges, a 16’×8’ …

Selective Recovery Of Rare Earth Elements From Acid Mine Drainage Treatment Byproduct, Zeynep Cicek

Graduate Theses, Dissertations, and Problem Reports

Rare earth elements (REEs) are critical in emerging clean energy, advanced technologies, and military defense applications due to their unique physical, chemical, optical, and luminescent properties. Given the potential supply chain restrictions imposed by one country's dominance in the global REE market and the consistently growing demand for REEs, developing the US domestic REE supply chain is imperative. Thus, alternative sources are crucial to supply the demand and prevent interruption in manufacturing products that consume REEs. Concurrently, acid mine drainage (AMD) is a long-standing and widespread global challenge the mining industry encounters. AMD is generated in large volumes and continuously …

Nonlinear Dynamic Analysis And Control Of Chemical Processes Using Dynamic Operability, San Quan Dinh

Graduate Theses, Dissertations, and Problem Reports

Nonlinear dynamic analysis serves an increasingly important role in process systems engineering research. Understanding the nonlinear dynamics from the mathematical model of a process helps to find the boundaries of all achievable process conditions and identify the system instabilities. The information on such boundaries is beneficial for optimizing the design and formulating a control structure. However, a systematic approach to analyzing nonlinear dynamics of chemical processes considering such boundaries in a quantifiable and adaptable way is yet to exist in the literature. The primary aim of this work is to formulate theoretical concepts for dynamic operability, as well as develop …

Dynamic Modeling, Data Reconciliation, Parameter Estimation, And Health Monitoring Of A Supercritical Power Plant, Katherine Grace Hedrick

Graduate Theses, Dissertations, and Problem Reports

With the introduction of a larger portion of renewable sources of power coming onto the U.S. power grid in recent decades, the operational strategy of coal-fired power plants has changed significantly to focus more on flexibility in response to the changing energy market. This has naturally led to different operational challenges. Many of these challenges are focused on the boilers within these plants, as they are producing more emissions and experiencing increased damage during load-following, which in turn leads to increased costs from penalties for not achieving emission standards or maintenance costs as boilers accumulate damage from the cycling behavior. …

Optimal Path Planning For Aerial Robots Using Genetic Algorithm, Anna Puigvert I Juan

Graduate Theses, Dissertations, and Problem Reports

This thesis presents a path optimization solution for a robot in two different constrained 3-dimensional (3D) environments. The robot is required to travel from its current position to a goal position following minimum cost paths (optimal paths). The first environment has 3D obstacles that interfere with the robot’s path. The path cost for this environment accounts for the minimum distance traveled by the robot from the start to the goal position while avoiding obstacles. The second environment is the atmosphere of Venus, specifically a flyable region of this atmosphere with characteristics similar to Earth’s. This environment has strong westward winds …

Modular Supply Network Optimization Of Renewable Ammonia And Methanol Co-Production, Benjamin Akoh

Graduate Theses, Dissertations, and Problem Reports

To reduce the use of fossil fuels and other carbonaceous fuels, renewable energy sources such as solar, wind, geothermal energy have been suggested to be promising alternative energy that guarantee sustainable and clean environment. However, the availability of renewable energy has been limited due to its dependence on weather and geographical location. This challenge is intended to be solved by the utilization of the renewable energy in the production of chemical energy carriers. Hydrogen has been proposed as a potential renewable energy carrier, however, its chemical instability and high liquefaction energy makes researchers seek for other alternative energy carriers. Ammonia …

Impacts Of Diverse Inflammatory Stimuli On Neutrophil Behavior: Extracellular Vesicles, E-Cigarettes, And Nanoparticles, Hunter T. Snoderly

Graduate Theses, Dissertations, and Problem Reports

Neutrophils are the body’s front-line defenders against foreign insult and are key players in a variety of inflammatory conditions. This body of work examines the role of neutrophils in promoting pathology in three distinct inflammatory contexts. In the pro-inflammatory state provoked by breast cancer, neutrophils decondense their nuclei and release cytotoxic web-like structures known as neutrophil extracellular traps (NETs). NETs form most commonly via histone modifications facilitated by the enzyme PAD4. NETs are known to be a harbinger of disease progression and promote metastasis through capture of circulating tumor cells. It was hypothesized that breast tumors release small particles known …

Simulations Of Implementation Of Advanced Communication Technologies, Ivy Yousuf Moutushi

Graduate Theses, Dissertations, and Problem Reports

Wireless communication systems have seen significant advancements with the introduction of 3G, 4G, and 5G mobile standards. Since the simulation of entire systems is complex and may not allow evaluation of the impact of individual techniques, this thesis presents techniques and results for simulating the performance of advanced signaling techniques used in 3G, 4G, and 5G systems, including Code division multiple access (CDMA), Multiple Input Multiple Output (MIMO) systems, and Low-Density Parity Check (LDPC) codes. One implementation issue that is explored is the use of quantized Analog to Digital Converter (ADC) outputs and their impact on system performance.

Code division …

Investigating The Impact Of Demographic Factors On Contactless Fingerprint Interoperability, Aeddon David Berti

Graduate Theses, Dissertations, and Problem Reports

Improvements in contactless fingerprinting have resulted in contactless fingerprints becoming a faster and more convenient alternative to contact fingerprints. The interoperability between contactless fingerprints and contact fingerprints and how demographic factors can change interoperability has been challenging since COVID-19; the need for hygienic alternatives has only grown because of the sudden focus during the pandemic. Past work has shown issues with the interoperability of contactless prints from kiosk devices and phone fingerprint collection apps. Demographic bias in photography for facial recognition could affect photographed fingerprints. The paper focuses on evaluating match performance between contact and contactless fingerprints and evaluating match …

Face Image And Video Analysis In Biometrics And Health Applications, Na Zhang

Graduate Theses, Dissertations, and Problem Reports

Computer Vision (CV) enables computers and systems to derive meaningful information from acquired visual inputs, such as images and videos, and make decisions based on the extracted information. Its goal is to acquire, process, analyze, and understand the information by developing a theoretical and algorithmic model. Biometrics are distinctive and measurable human characteristics used to label or describe individuals by combining computer vision with knowledge of human physiology (e.g., face, iris, fingerprint) and behavior (e.g., gait, gaze, voice). Face is one of the most informative biometric traits. Many studies have investigated the human face from the perspectives of various different …

Lithium-Ion Battery Safety Analysis With Physical Sub-Models, Samuel Abimbola Ogunfuye

Graduate Theses, Dissertations, and Problem Reports

Ever-increasing explosions occurring globally at a rapid rate and in diverse situations have re-established the fact that novel, faster, and more accurate approaches must be developed to analyze and possibly curb these explosions and avert their future occurrences. Experimental endeavors and computational fluid dynamics (CFD) simulations as compared to engineering models generally require enormous time, and resources, as well as a high-level of expertise and technicalities. This might, however, delay prompt analysis and the ability to draw conclusions, thereby causing setbacks in recommending safety measures for different situations and conditions. Therefore, robust models which are accurate and fast to give …