Engineering Commons^™

Experimental Study On Double‑Mixture Solidification And Ratio Optimization Of Dredger Fill Sludge, Qin Liang, Chen Zhimin, Lu Yongfei

Journal of China & Foreign Highway

In order to study the optimal r atio of cement and calcium oxide by double-mixture solidification for improving dredger fill sludge，the soil modification results by double-mixture solidification were analyzed based on orthogonal experiments.Finally，the fuzzy comprehensive evaluation method was used to quantitatively optimize each ratio scheme.The results show that：① Under the same addition ratio （addition amount of 1.0%‒4.0%），there is a positive linear correlation between the optimal moisture content and the addition amount，and there is a negative linear correlation between the optimal moisture content and the maximum dry de nsity.Under non-equal addition ratios，the law is not obvious.However，compared to cement，the water-reducing effect of …

Road Performance Of Reclaimed Asphalt Mixture Mixed With Bagasse Fibers And Rubber‑Modified Asphalt, Jiang Xin

Journal of China & Foreign Highway

Given the potential resource value of rec laimed asphalt pavement，waste rubber powder，and bagasse fibers，it is meaningful to develop the cooperative utilization of various solid wastes.This paper studied the microstructure and thermal characteristics of bagasse fibers，carried out the mix design of a reclaimed asphalt mixture with bagasse fibers and rubber-modified asphalt，and evaluated its road performance.At the same time，the test road was paved successfully and observed for a time.The results show that the hollow lumen with multilayer fiber structure in bagasse fibers contributes to absorbing free asphalt in mixtures and enhances the adhesion between bagasse fibers and asphalt.The thermal properties of bagasse …

Feasibility Of Sandstone Used In Asphalt Pavement Of Expressways, Lou Jianmin, Meng Xiandong, Song Zhike, Zhao Lidong, Bai Julong, Zhao Shengli, Zhu Jishuang

Journal of China & Foreign Highway

In order to explore the feasibility of applying sandstone in the asphalt pavement of expressways，the physical and mechanical indexes of sandstone and limestone aggregate were compared，and the high temperature performance，low temperature performance，and water stability of asphalt mixture were studied from the aspects of grading type，asphalt type，and aggregate lithology.The results show that the road performance of asphalt mixture synthesized by clean and regular sandstone aggregate meets the requirements of current specifications.At the same time，the comprehensive road performance of sandstone asphalt mixture with 1% anti-stripping agent has been improved.

Key Construction Techniques For Emended Cap Unsealed Bottom Of Deep‑Water Hard Rock, Zeng Jian, Guan Xiaohui, Guo Zhiwei

Journal of China & Foreign Highway

In the construction of a deep-water embedded cap foundation，it was required to excavate the mud surface to the depth below sealing concrete and clean the bottom carefully，ensuring the height and quality of bottoming concrete.For hard rock under good geological conditions，there exist such problems as difficulty in excavation，long excavation time consumption，and high construction cost.Based on the construction of the main pier caps of the Chongqing Jiahua Metro Bridge，this paper adopted the method of combining theoretical analysis，numerical calculation，and engineering implementation verification，which developed an emended cap unsealed bottom key construction techniques for deep-water hard rock.This construction technology used the method of excavating the …

Influence Of Blasting Point Position And Foundation Pit Height On Blasting Vibration During Foundation Pit Blasting Excavation, Liu Kuan, Xu Zhihao, Tang Yuan, Shen Jun, Bao Xiaohua, Shen Pinghuan, Ou Yang

Journal of China & Foreign Highway

In view of inaccurate vibration prediction of foundation pit blasting，the influence of blasting point position and foundation pit height on vibration during foundation pit blasting excavation was studied by using finite element simulation software.First，based on the foundation pit blasting excavation of the Mawan Cross-Sea Passage，a numerical simulation was carried out to verify the applicability of the model.Then，under unchanged blasting center distance，the distance from the blasting point to the edge of the foundation pit and the foundation pit height were changed respectively，and the influence of these two factors on surface vibration was studied.The results show that a greater distance from the …

Excavation Method For Ⅴⅴ‑Grade Surrounding Rock Of Double‑Hole Eight‑Lane Super‑Long‑Span Tunnel, Shi Youzhi, Liu Xudong, Yong Jinzhu

Journal of China & Foreign Highway

In order to reduce the adverse effect of back heading blasting on the completed supporting structure at the entrance of a double-hole eight-lane super-long-span tunnel with Ⅴ-grade surrounding rock，the Niuzhaishan tunnel project in Pingtan was taken as an example.The original design of the double-side heading method is easy to cause the collapse of the temporary steel support that has been completed when blasting happens near the back heading.In view of this，this paper put forward scheme 1 of canceling the temporary transverse support and the up-and-down step method with vertical support （scheme 2）.It then used the finite element method to calculate …

Design And Evaluation Of Land‑Saving And Beautiful Median Barriers, Li Jingjun, Wa Ng Xin, Qi Jie, Wang Zijian, Liu Siyuan

Journal of China & Foreign Highway

During the construction and expansion of expressways and national and provincial highways，more diversified requirements have been put forward for the median barrier，including reliable protective performance，small footprints，beautiful traffic environments，and economic costs.However，the existing median barrier achievements still have some shortcomings.In order to better meet the design and use needs of median barriers for highways，theoretical analysis，computer simulation，and full-scale impact tests with real vehicles were adopted，and the force characteristics of different types of median barriers were analyzed.A new design concept of beam-column integration was put forward.Through systematic research on the barrier height，width，beam，column，foundation，and other structures，a land-saving and beautiful median barrier was developed.The median barrier had …

Multi-Region Plane Fitting Algorithm For Texture Depth Of Asphalt Pavements, Zhu Feng, Feng Xingle, Wu Chuan, Lin Xiaoyong

Journal of China & Foreign Highway

The existing calculation methods for texture depth of asphalt pavements are easily affected by external and human factors.Therefore，a multi-region plane fitting algorithm for the texture depth based on three-dimensional （3D） linear laser data was proposed.The algorithm preprocessed the collected 3D height data matrix of the pavement and derived a slope-based adaptive filtering algorithm for point cloud data.Then, the 3D height matrix was divided into multiple regions，and the local extremum of the center point was determined.Finally，with the three-point and one-surface plane fitting algorithm as the core，the texture depth of asphalt pavements was calculated.The experimental results show that the correlation between this …

Key Technology And Numerical Simulation Of Cast‑In‑Place Construction Of Main Arch Ring Of Reinforced Concrete Arch Bridge Based On Suspension Steel Arch Method, Su Xueping, Xia Zhengzhi, Lyu Songgang, Duan Pengjie, Lyu Yigang

Journal of China & Foreign Highway

Steel arch frame replaced such construction methods as floor bracket or segment cantilever assembly and it was applied to arch circle cast-in-place across deep water canyons in mountainous areas，which had certain advantages and was worth promoting and applying.By introducing the key construction technologies of Sanchahe Bridge，including steel arch frame cantilever fastener method assembly，arch water tank method precompression，and main arch ring layered pouring，the common problems in the construction process of crossing the deep water canyon were solved effectively.Based on Midas Civil overall modeling of finite elements，the key construction technologies adopted by the bridge were numerically simulated and analyzed，and the successful construction …

Guardrail Improvement For Old Bridges In Expressways, Liu Xinping, Zhang Shihui, Shang Zhongping, Han Yue, Zhang Qiang

Journal of China & Foreign Highway

In view of the insufficient protection grade of the guardrail in old bridges，a combined guardrail suitable for the low concrete wall guardrail in the old bridge was designed and developed by using finite element analysis while not damaging the main structure of the bridge.The protection grade was verified to reach SA grade through a full-scale vehicle collision test.The guardrail was designed with new high-strength alloy steel，with light weight and beautiful appearance.There was no need to dismantle the original concrete foundation in the old bridge，which is convenient for construction and requires low cost.Therefore，it is worth being popularized and applied in the …

Improvement Of Gravelly Laterite And Cement Stable Disposal In West Africa, Jin Haibing, Yi Zicheng, Zhuo Rong

Journal of China & Foreign Highway

Owing to poor gradation and high liquid limit and plasticity index，the application of gravel laterite on road paving is limited in West Africa.To overcome this issue，laterite granule combined with sand at different content was explored.The performance including the particle composition，limit water content and CBR value was investigated.The results indicate that sand treatment can improve the gradation，enhance the compactness，and reduce the plasticity index.The improved gravel laterite can meet the requirements of subbase，cushion，and base courses.Cement treatment can improve the mechanical properties of laterite grains.Cement and sand content affect the unconfined compressive strength significantly，with an optimal sand content range identified.Specifically，laterite granules mixed with …

Ionic Conductivity, Li+ Transference Number, And Diffusion Coefficient Of A Solid-State Electrolyte Composite, Lizbeth Zurita

Reviews, Analyses, and Instructional Studies in Electrochemistry (RAISE)

The design of solid-state electrolyte (SSE) composites involves the fundamental study of transport properties, such as ionic conductivity. This transport property is influenced by the transport mechanisms of the charge species inside the composite, such as diffusion and migration. In this work, we perform the measurement of these three parameters through defined techniques. The resulting parameters were: ionic conductivity, the diffusion coefficient, and the Li+ transference number.

The Results Of Hydrodynamic Studies On Stationary And Non-Stationary Filtration Modes On The Example Of The Kruk Deposit, Nazirila Maxmudov, Nargiza Akhmedova, Saodat Shukurullaeva

Technical science and innovation

The article presents the results of gas-hydrodynamic studies at the Kruk field, using methods of steady selection and pressure recovery based on stationary and unsteady modes, which were carried out according to the well research methodology, which prescribes the separation into phases of the entire productive flow of the gas-liquid mixture in the separator, in which, under various separation modes, the amount of liquid phase, namely gas condensate and formation water, was separated and measured.. A mobile full-flow separation installation was used as a separator. The condensate output was measured in a calibrated container using a measuring ruler, which made …

Studying The Production Of Nanocelluloses, Shohzodbek Abduvahobovich Rashidov, Elmurod Abduqodirovich Egamberdiev, Sadritdin Maxamatdinovich Turabdjanov

Technical science and innovation

Nanoscience is a broad field that includes nanophysics and nanochemistry. Nanotechnologies are aimed at obtaining nanoparticles with new properties and creating materials and devices based on them. This is one of the modern trends in the development of science in the 21st century.

Based on the study of information about nano-sized materials, the mechanisms of their production and changes in their properties, we will consider the technology for producing nanocellulose from organic substances, i.e. from cellulose. The article describes a technology that examines devices for producing nanocellulose and the principles of their operation, as well as a combined method of …

Model To Demonstrate Effects Of Mass Transfer And Applied Current In An Electrolytic Cell, George Ankrah

Reviews, Analyses, and Instructional Studies in Electrochemistry (RAISE)

This study investigates the relationship between applied current and resulting cell potential in an electrolytic system, considering the transport of electroactive species. By applying Michael Faraday's laws of electrolysis and the Nernst-Planck equation, the behavior of electroactive species in diffusion-controlled systems with and without stirring is modeled. The plots demonstrate how stirring enhances ion transport and establishes a stable Nernst diffusion layer, affecting the kinetics of electrochemical reactions. Understanding these dynamics is crucial for optimizing electrolysis processes.

Review Of Cyclic Voltammetry Measurements For Uranium In Flinak Molten Salt, Jackson Ivory

Reviews, Analyses, and Instructional Studies in Electrochemistry (RAISE)

The electrochemical behavior of uranium FLiNaK molten salts is explored, focusing on cyclic voltammetry (CV) as a powerful tool for redox characterization and diffusion studies. Through a comprehensive review of recent research, the study highlights the significance of CV in understanding electrode kinetics, material compatibility, and process optimization in molten salt environments. The findings underscore the potential of FLiNaK molten salt reactors in advancing nuclear energy technologies, fuel processing, and waste management strategies. Collaborative interdisciplinary efforts are emphasized to address challenges and accelerate innovation in electrochemical methods for nuclear applications.

Model Of The Effect Of Voltage On Contact Angle In An Electrolytic Cell Reaction, Aaron Essilfie

Reviews, Analyses, and Instructional Studies in Electrochemistry (RAISE)

This paper investigates the hypothesis that the contact angle at the meniscus of an electrode-electrolyte can be altered during a redox reaction through the coupled understanding of electrowetting and capillarity rise. Recent studies in electrowetting have focused on dielectric surfaces but research on contact angle at the electrode-electrolyte surface is lacking. The study employs a basic electrolytic cell. By applying principles of electrowetting and capillary rise the research aims to understand the relationship between applied voltage and contact angle, to advancements in electrochemistry and microfluidics.

An Overview Of How To Measure The Kinetic Properties Of An Anode Material For The Chlorine Evolution Reaction, Cameron Vann

Reviews, Analyses, and Instructional Studies in Electrochemistry (RAISE)

The process of generating chlorine gas using electrolysis in aqueous systems is well established. However, a new process requires chlorine to be generated at high temperatures using molten salt. This harsh environment requires a new study of anode materials for the chlorine evolution reaction. Anode materials can be compared by their kinetic parameters, the transfer coefficient α and the exchange current i0. The basic theory of these properties as they relate to the chlorine evolution reaction has been detailed and an analysis method for finding these effective parameters has been shown and demonstrated.

Improving Ethics Surrounding Collegiate-Level Hacking Education: Recommended Implementation Plan & Affiliation With Peer-Led Initiatives, Shannon Morgan, Dr. Sanjay Goel

Military Cyber Affairs

Cybersecurity has become a pertinent concern, as novel technological innovations create opportunities for threat actors to exfiltrate sensitive data. To meet the demand for professionals in the workforce, universities have ramped up their academic offerings to provide a broad range of cyber-related programs (e.g., cybersecurity, informatics, information technology, digital forensics, computer science, & engineering). As the tactics, techniques, and procedures (TTPs) of hackers evolve, the knowledge and skillset required to be an effective cybersecurity professional have escalated accordingly. Therefore, it is critical to train cyber students both technically and theoretically to actively combat cyber criminals and protect the confidentiality, integrity, …

Using Digital Twins To Protect Biomanufacturing From Cyberattacks, Brenden Fraser-Hevlin, Alec W. Schuler, B. Arda Gozen, Bernard J. Van Wie

Military Cyber Affairs

Understanding of the intersection of cyber vulnerabilities and bioprocess regulation is critical with the rise of artificial intelligence and machine learning in manufacturing. We detail a case study in which we model cyberattacks on network-mediated signals from a novel bioreactor, where it is important to control medium feed rates to maintain cell proliferation. We use a digital twin counterpart reactor to compare glucose and oxygen sensor signals from the bioreactor to predictions from a kinetic growth model, allowing discernment of faulty sensors from hacked signals. Our results demonstrate a successful biomanufacturing cyberattack detection system based on fundamental process control principles.

Characterizing Advanced Persistent Threats Through The Lens Of Cyber Attack Flows, Logan Zeien, Caleb Chang, Ltc Ekzhin Ear, Dr. Shouhuai Xu

Military Cyber Affairs

Effective cyber defense must build upon a deep understanding of real-world cyberattacks to guide the design and deployment of appropriate defensive measures against current and future attacks. In this abridged paper (of which the full paper is available online), we present important concepts for understanding Advanced Persistent Threats (APTs), our methodology to characterize APTs through the lens of attack flows, and a detailed case study of APT28 that demonstrates our method’s viability to draw useful insights. This paper makes three technical contributions. First, we propose a novel method of constructing attack flows to describe APTs. This abstraction allows technical audiences, …

Generative Machine Learning For Cyber Security, James Halvorsen, Dr. Assefaw Gebremedhin

Military Cyber Affairs

Automated approaches to cyber security based on machine learning will be necessary to combat the next generation of cyber-attacks. Current machine learning tools, however, are difficult to develop and deploy due to issues such as data availability and high false positive rates. Generative models can help solve data-related issues by creating high quality synthetic data for training and testing. Furthermore, some generative architectures are multipurpose, and when used for tasks such as intrusion detection, can outperform existing classifier models. This paper demonstrates how the future of cyber security stands to benefit from continued research on generative models.

Machine Learning Security For Tactical Operations, Dr. Denaria Fields, Shakiya A. Friend, Andrew Hermansen, Dr. Tugba Erpek, Dr. Yalin E. Sagduyu

Military Cyber Affairs

Deep learning finds rich applications in the tactical domain by learning from diverse data sources and performing difficult tasks to support mission-critical applications. However, deep learning models are susceptible to various attacks and exploits. In this paper, we first discuss application areas of deep learning in the tactical domain. Next, we present adversarial machine learning as an emerging attack vector and discuss the impact of adversarial attacks on the deep learning performance. Finally, we discuss potential defense methods that can be applied against these attacks.

Securing The Void: Assessing The Dynamic Threat Landscape Of Space, Brianna Bace, Dr. Unal Tatar

Military Cyber Affairs

Outer space is a strategic and multifaceted domain that is a crossroads for political, military, and economic interests. From a defense perspective, the U.S. military and intelligence community rely heavily on satellite networks to meet national security objectives and execute military operations and intelligence gathering. This paper examines the evolving threat landscape of the space sector, encompassing natural and man-made perils, emphasizing the rise of cyber threats and the complexity introduced by dual-use technology and commercialization. It also explores the implications for security and resilience, advocating for collaborative efforts among international organizations, governments, and industry to safeguard the space sector.

Modeling Of Continuous Stirred Tank Reactor For Esterification Process, Olimjon Rikhsiboyevich Maksudov, Abdulaziz Nodirbek Ogli Bakhtiyorov, Orifjon Olimovich Zaripov, Аdhаm Tilovovich Norkobilov

Technical science and innovation

This paper presents a comprehensive study on the synthesis of ethyl acetate through the esterification of acetic acid with ethanol using a continuous stirred tank reactor (CSTR). Ethyl acetate is a significant solvent in various industries due to its eco-friendly characteristics and economic efficiency. The study develops a detailed mathematical model focusing on the operating of the CSTR to enhance the understanding of the reaction kinetics and thermodynamics in a continuous processing environment. The reactor model was validated with experimental data to optimize process parameters, aiming to improve yield and selectivity. Key variables such as reactant ratios, and operational temperatures …

Using Chatgpt With Novice Arduino Programmers: Effects On Performance, Interest, Self-Efficacy, And Programming Ability, Donald M. Johnson, Will Doss, Christopher M. Estepp

Journal of Research in Technical Careers

A posttest-only control group experimental design compared novice Arduino programmers who developed their own programs (self-programming group, n =17) with novice Arduino programmers who used ChatGPT 3.5 to write their programs (ChatGPT-programming group, n = 16) on the dependent variables of programming scores, interest in Arduino programming, Arduino programming self-efficacy, Arduino programming posttest scores, and types of programming errors. Students were undergraduates in an introductory agricultural systems technology course in Fall 2023. The results indicated no significant (p < .10) differences between groups for programming rubric scores (p = .50) or interest in Arduino programming (p = .50). There were significant differences for Arduino programming self-efficacy, (p = .03, Cohen’s d = 0.75) and Arduino posttest scores, (p = .03, Cohen’s d = 0.76); students in the self-programming group scored significantly higher on both measures. Analysis of students’ errors indicated the ChatGPT group made significantly (p < .01) more program punctuation errors. These results indicated novice students writing their own programs developed greater Arduino programming self-efficacy and programming ability than novice students using ChatGPT. Nevertheless, ChatGPT may still play an important role in assisting novices to write microcontroller programs.

Commercial Enablers Of China’S Cyber-Intelligence And Information Operations, Ethan Mansour, Victor Mukora

Military Cyber Affairs

In a globally commercialized information environment, China uses evolving commercial enabler networks to position and project its goals. They do this through cyber, intelligence, and information operations. This paper breaks down the types of commercial enablers and how they are used operationally. It will also address the CCP's strategy to gather and influence foreign and domestic populations throughout cyberspace. Finally, we conclude with recommendations for mitigating the influence of PRC commercial enablers.

Presence Of Atheromatous Plaques And Theirs Effects On The Blood Flow, Belhocine Mostefa Bm, Amrani Hichem Ah, Fedaoui Kamel Dr, Mazouz Hammoudi Mh

Emirates Journal for Engineering Research

The paper utilizes a finite element method to study both the blood flow and atheromatous plaques. Specifically, the COMSOL finite element package is employed to achieve a fluid model. COMSOL is a powerful finite element tool commonly used in various research and industrial domains to study multiphysics problems. The focus of the investigation is on the geometric aspects of the atheromatous plaques. The study considers different forms and arrangements of stenosis, taking into account the irregularities formed by various shapes of the plaques and the resulting flow patterns. The key findings of the research suggest that the pressure and velocity …

Synthesis Of Acetylene Diols With The Participation Of The Bu4noh/Dmso/H2o Catalytic Systems, Muyassar K. Salieva, Odiljon E. Ziyadullayev, Guzal K. Otamukhamedova, Rifkat F. Talipov, Lochin K. Ablakulov

CHEMISTRY AND CHEMICAL ENGINEERING

The purpose of this work in this study, acetylene alcohols containing heteroatomic substituents in their molecular composition- 2-(-thiophen-2-yl)but-3-yn-2-ol, 2-(3-methylthiophen-2-yl)but-3-yn-2-ol, 2-(furan-2-yl)but-3yn-2-ol, 2-(pyridin-4-yl)but-3-yn-2-ol, 2-(5-chlorothiophen-2-yl)but-3-yn-2-ol, 2-(5-bromothiophen-2yl)but-3-yn-2-ol acetylene diols were synthesized based on the reaction with acetone in a dimethyl sulfoxide solvent in the presence of the Bu₄NOH/DMSO/H₂O catalytic system. The influence of the molar ratio of starting materials, reaction duration, temperature, nature of the catalyst and solvents on the product yield was systematically studied. The composition, purity and structure of the new generation of synthesized acetylenediols have been confirmed by modern physicochemical methods. The mechanism of the reaction process …

Synthesis Of High Molecular Mass Resins Based On Furfuryl Alcohol, Boysayid U. Sayidov, Latif E. Jumanov, Muzaffar G. Alimukhamedov, Sherali A. Umarov, Farhod A. Magrupov

CHEMISTRY AND CHEMICAL ENGINEERING

The purpose of the work is to study the process of synthesis of furfuryl oligomers with high molecular weight at various ratios of furfuryl alcohol and hydroxyl-containing polyether polyol. The influence of the process method on the yield of high-molecular furfuryl oligomer is shown - with a one-step synthesis method with an increase in the amount of furfuryl alcohol from 20 to 50 moles per 1 mole of polyether polyol, the yield of the final product decreases from 75% to 56%, apparently due to high exothermic effects, causing gelation systems. In contrast to the one-time introduction of the catalyst, its …