Engineering Commons^™

A Surface-Based Approach For 3d Approximate Convex Decomposition, Onat Zeybek Kuşkonmaz, Yusuf Sahi̇lli̇oğlu

Turkish Journal of Electrical Engineering and Computer Sciences

Approximate convex decomposition enables the simplification of complex shapes into manageable convex components. In this work, we propose a novel surface-based method to achieve this which leads to efficient computation times and sufficiently convex results while avoiding over-approximating the input model. We start approximation using mesh simplification. Then we iterate over the surface polygons of the mesh and divide them into convex groups. We utilize planar and angular equations to determine suitable neighboring polygons for inclusion in forming convex groups. To ensure our method outputs a sufficient result for a wide range of input shapes, we run multiple iterations of …

Lgformer: Informer-Based Personalized Modeling For Blood Glucose Prediction, Xue Yuewei, Shaopeng Guan, Jia Wanhai

Turkish Journal of Electrical Engineering and Computer Sciences

Effective diabetes management relies on precise prediction of blood glucose levels to minimize complications. However, the patterns and fluctuations in blood glucose vary significantly among patients, posing a challenge for existing prediction methods. Many current approaches fail to accommodate these individual differences, leading to less reliable predictions. In response to this challenge, we present LGformer, a novel prediction model based on the Informer architecture, designed to enhance both flexibility and accuracy. LGformer improves upon Informer by integrating LSTM and GRU layers into its probSparse Self-attention mechanism, allowing for personalized processing of blood glucose data tailored to each patient's unique profile. …

A Nanoindentation-Based Study On The Micromechanical Properties Of Red Shales, Zhou Lang, Ma Zhenqian, Huang Qingrong, Shuai Yunlin, Zhang Jimin, Liu Rongke

Coal Geology & Exploration

Objective Investigating the micromechanical properties of minerals using nanoindentation tests is of great significance for revealing the microscale mechanisms behind mineral failure. Methods Focusing on the primary minerals in the surrounding rocks of red shales in a phosphate deposit, this study conducted qualitative and semi-quantitative analyses of these minerals, including their spatial distributions, using X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectrometry (EDS), and targeted nanoindentation tests, determining the micromechanical properties of the minerals. This study developed a discrete numerical calculation model for the microscopic nanoindentation of minerals based on Voronoi tessellation and compared the simulation results with …

State Of The Art And Future Directions In Groundwater Contamination Risk Assessment, Xu Beiyi, Wang Ce, Zhou Guangyang, Zhou Pengpeng

Coal Geology & Exploration

Background Rapid global socio-economic development has intensified the resource crisis and contamination of groundwater, rendering groundwater contamination risk assessments critical to contamination prevention, control, and remediation. Advances Through a systematic summary of domestic and international studies, this study reviews the development of theories on groundwater contamination risk assessments and the formation of the theoretical system. Based on the source-pathway-receptor assessment system, this study presents a summary of the research methods for the assessments of contamination source load risks, groundwater vulnerability, and contamination hazards. Groundwater contamination risk assessments have evolved from unidimensional qualitative assessments to quantitative process models highlighting contamination mechanisms …

Underground Coal Gasification In The Aidinghu Mining Area, Turpan-Hami Coalfield: Geological Evaluation System And The Selection Of The Optimal Coal Seam, Zeng Zhiwei, Lai Peng, Tian Jijun, Yang Shuguang, Hu Zhenpeng, Wang Bo, Yu Yu, Wang Haichao, Liu Yunxuan, Yuan Yixuan

Coal Geology & Exploration

Objective Underground coal gasification (UCG) is an innovation in traditional coal mining technology. The prerequisites for successful UCG include developing a systematic geological evaluation system and scientifically selecting the optimal coal seam.Methods Using mathematical analysis methods such as analytic hierarchy process (AHP), coefficient of variation method, and technique for order preference by similarity to ideal solution (TOPSIS), this study systematically analyzed the coal quality, coal seam occurrence, hydrology, surrounding rocks, geological structures, hazardous elements, and geological exploration degree of coal reservoirs in the Aidinghu mining area, Turpan-Hami coalfield. Accordingly, this study deeply explored the feasibility of UCG in the …

Research Progress On Variation Pattern And Monitoring Control Technology Of Negative Pressure For Gas Drainage In Directional Long Borehole, Li Quanxin, Cheng Zhuoer, Fang Jun, Mou Quanbin, Liu Fei, Cong Lin

Coal Geology & Exploration

Significance Near-horizontal directional long borehole is an important technical approach and effective means for preventing and controlling the gas disasters of coal mine. Negative pressure is an important factor affecting the gas drainage effect of directional long borehole. Advances Herein, the research progress on gas drainage through near-horizontal directional long borehole was systematically summarized from three aspects: the attenuation mechanism and distribution law of negative pressure in the borehole, gas drainage parameter monitoring technology, and intelligent control system for gas drainage. Regarding the attenuation mechanism and distribution law of negative pressure in the borehole, the basic theoretical research results concerning …

Fine And Intelligent Interpretation Of Key Geological Structures In The Metal Metallogenesis Of Coal Measures, Yang Yi, Zhao Jingtao, Li Wenyu, Shi Suzhen

Coal Geology & Exploration

Objective In order to identify the key geological structures in the metallogenic process of coal measures metal deposits, the Linxing block of Ordos Basin was taken as the research object. Based on the previous research results, geological data of the block, seismic and logging data, a geological model including tectonic volcanic activities and other events was constructed to analyze the key geological factors of deposit formation. Methods Firstly, based on the post-stack seismic data, the diffraction wave separation and imaging are realized by using the plane wave destruction filter technology, and the small-scale key geological information is extracted. Secondly, the …

In-Situ Superconductor Temperature Sensor For Cryogenic Integrated Circuits, Emre Küçükyilmaz, Nazi̇f Orhun Tekci̇, Sasan Razmkhah, Ali̇ Bozbey

Turkish Journal of Electrical Engineering and Computer Sciences

Cryogenic circuits, such as those based on single flux quantum (SFQ) logic, function at extremely low temperatures. Therefore, the designs target the utilization of liquid helium (LHe) temperatures, maintaining them at 4.2 K. These specialized circuits can be subjected to measurement either within liquid helium (LHe) baths or enclosed within closed-cycle cryocoolers.However, when utilizing LHe in cryocooler systems, inherent weak thermal contact can lead to temperature gradients between the circuit chip and the cold head, where conventional temperature sensors are typically placed. To address this challenge, this study introduces an innovative on-chip temperature sensing approach that capitalizes on the temperature …

Fault Diagnosis Of Photovoltaic Array Based On Gated Residual Network With Multi-Head Self Attention Mechanism, Ahmed Mesai Belgacem, Mounir Hadef, Abdesslem Djerdir

Turkish Journal of Electrical Engineering and Computer Sciences

Effective fault identification and diagnosis in photovoltaic (PV) arrays is vital for improving the effectiveness, and safety of solar energy systems. While various artificial intelligence methods have successfully established fault detection and diagnosis models, introducing inefficiencies and potentially overlooking useful features. Moreover, these methods often employ neural networks with limited performance capabilities. In response to these challenges, this paper introduces an innovative intelligent model that integrates a combination of a gated residual neural network (GRN) and a multi-head self-attention mechanism (MHSA). To evaluate the proposed fault diagnosis model, the small-scale PV grid system is implemented, and fault simulation experiments, including …

Exploring How Personal And Program Characteristics Inform The Experiences Of Engineering Students Abroad, Kirsten A. Davis, David B. Knight

School of Engineering Education Faculty Publications

Background

As more universities seek to offer international experiences for engineering students, it is important to design such programs to effectively support student learning abroad. Previous research on study abroad has focused on a limited number of outcomes and therefore failed to consider the diversity of experiences students may have in the same program and the range of learning outcomes they may develop while abroad.

Purpose

We explored student experiences across multiple types of engineering study abroad programs to address the research question: How do the types of significant experiences students highlighted from their time abroad differ based on student …

Towards Human-Machine Collaboration In Autonomous Material Handling On Construction Sites, Jyrki Oraskari, Lukas Kirner, Marit Zöcklein, Sigrid Brell-Cokcan

Human-Machine Communication

In the contemporary construction industry, the shortage of skilled labor has prompted the exploration of automation as a remedy and machine autonomy as a potential solution to the environmental conditions at the site. This research explores the balance between human oversight and the independent decision-making capabilities of robots for material delivery on construction sites. Using a scenario-based approach, autonomy in construction robotics is evaluated across four human-machine interaction cases with spatial and temporal dimensions. The expected outcomes revolve around improved safety through better human-machine communication and establishing an interoperable data model to enhance robot autonomy. This aims to automate tasks …

Analysing Sound Characteristics Of Cello And Violin Using Fast Fourier Transform, Sinin Hamdan, Khairul Anwar Mohamad Said, Ahmad Faudzi Musib, Marini Sawawi, Aaliyawani Ezzerin Sinin

ASEAN Journal on Science and Technology for Development

The unique sound characteristics of music are based on multiple harmonic frequencies that exist within the sound waves. Through Fast Fourier Transform (FFT) software, the wave can be broken down into frequency and amplitude components. Spectrum analysis can be used quantitatively to describe these sound characteristics. In this paper, the frequency range present in the spectrum and the average intensity of the first 10 high notes in the sound are used to classify the sound characteristics of the cello and violin. This is done by generating a frequency (x-axis) and amplitude (y-axis) graph for the sounds of the cello and …

Sdf-1Α Mediates Primary Tumor Escape In Glioblastoma Through Activation Of Mesenchymal Transitions, Charles T. Froman-Glover

The Cardinal Edge

Glioblastoma (GBM), a highly aggressive primary brain tumor originating in glial cells, poses a significant challenge due to its rapid growth and invasive nature within healthy brain tissue.

Current treatments involve surgical resection, chemotherapy, and radiation. These treatments alone are not enough to cure this disease, and a better understanding of the mechanics of the tumor's micro-environment is imperative to furthering the field of cancer research. This research focuses on understanding the tumor microenvironment's impact, specifically investigating the role of stromal cell-derived factor 1 (SDF-1) mechanics on GBM aggressiveness. SDF-1 is known to facilitate disease progression by facilitating chemotaxis toward …

Applying Visual Identity At The Main Entrances To Cities (Case Study: Entrance To Beni Suef City), Nesma Mohamed Abd El- Maksoud

Mansoura Engineering Journal

Egypt’s vision and many initiatives, such as the “Controlling Egyptian Urbanism and Supporting Visual Identity” initiative, seek to create a visual identity for Egypt’s governorates, to deepen the concept of national belonging, and to issue a guideline for visual identity at the level of each governorate. The visual identity of cities is produced from a set of urban, social, cultural, historical, and environmental variables. Economically, the research studies how to link the urban and visual identity of cities and express it through the entrances to cities and the urban spaces surrounding them to improve and develop the city’s local and …

Disciplinary Policy Research On Science Development Strategies For Crewed Lunar Exploration, Wei Yang, Yuyang He, Jinting Kang, Ruiyi Chen, Huihong Cheng, Li Sun, Pan Deng, Yong Wei, Yangting Lin, Xianhua Li

Bulletin of Chinese Academy of Sciences (Chinese Version)

In order to better serve China’s crewed lunar exploration, this study researched and analyzed the current status of lunar exploration and planetary science research in China and the United States. Additionally, we conducted interviews and a questionnaire survey with experts in planetary science and deep-space exploration, and formed the following four policy recommendations: 1) Strengthening the layout and management of the disciplines of lunar and planetary sciences, and setting up a long-term and stable funding mechanism; 2) Improving the system of talent cultivation, and encouraging young talents to participate in deep-space exploration missions; 3) Strengthening the protection of original ideas, …

Benefits And Challenges Of Constructing Low-Altitude Air Route Network Infrastructure For Developing Low-Altitude Economy, Xiaohan Liao, Chenchen Xu, Huping Ye

Bulletin of Chinese Academy of Sciences (Chinese Version)

Low-altitude airspace is a resource that needs to be fully explored, and the low-altitude economy is a new type of economic activity resulted from low-altitude airspace exploration and utilization. As the primary players of low-altitude flight activities, the commercialization and wide applications of unmanned aerial vehicles (UAVs) are promoting the prosperity of the low-altitude economy. A low-altitude air route network is an effective means to ensure the safe and efficient operations of a large number of UAVs, and it is also a new key infrastructure hosting low-altitude traffic. The history shows that the investment on public transport infrastructure as a …

Fostering Systems Thinking Through Engineering Study Abroad Programs, Desen S. Ozkan, Kirsten A. Davis, James C. Davis, Jessica Deters, Homero Murzi

School of Engineering Education Faculty Publications

Engineering study abroad programs are a novel setting for students to develop systems thinking, which has primarily been taught in formal learning environments. Through a situated learning perspective, we examined the impact of two engineering-focused study abroad experiences on developing students’ systems thinking skills. We conducted secondary data analysis to examine how first-year engineering students (n = 47) at a technical university in the United States (US) connect technical and contextual aspects of engineering in China and the UK/Ireland. The students on the China track drew connections more frequently (81% of excerpts) than those on the UK/Ireland track (49% …

Situation And Challenges In Development Of China’S Commercial Aerospace, Chaofeng Huang, Chao Zhang, Jinge Li, Mengru Dong

Bulletin of Chinese Academy of Sciences (Chinese Version)

Commercial aerospace is an important support for the national aerospace power strategy and a “new growth engine” for economic development, serving as a strategic pivot to win the future competitive landscape. Currently, China’s commercial aerospace industry is facing a mixed and urgent situation. On the one hand, the international competition situation is severe, with frequency track resources being seized and squeezed, international rules being passively constrained, and global market breakthroughs being hindered. On the other hand, domestic development opportunities are highlighted. The multidimensional support of central local cooperation is constantly strengthening, and the development prospects driven by industrial demand are …

Suggestions On Expanding Application Scenarios Of Commercial Aerospace Market, Mengru Dong, Chaofeng Huang, Ningyi Yang, Yu Yao, Yafeng Qin

Bulletin of Chinese Academy of Sciences (Chinese Version)

Expanding the application scenarios of the commercial aerospace market is an inevitable requirement for promoting the transformation and upgrading of the space industry and achieving the strategic goal of becoming a leading space power. Currently, the development of China’s commercial aerospace is in a critical transition period from technological breakthroughs to market expansion. However, there are still problems such as insufficient participation of private enterprises, low penetration of consumer markets, and insufficient competitiveness in the international market, and a sustainable and benign commercial closed loop has not yet been formed. The study analyzes the current situation of commercial aerospace market …

Reflections On Improving Industrial Investment And Financing Environment To Promote Healthy Development Of Commercial Aerospace, Cuilin Wu, Chao Zhang, Quan Cheng, Hongyu Wu

Bulletin of Chinese Academy of Sciences (Chinese Version)

As a new frontier in global technological competition, the sustainable development of the commercial aerospace industry highly depends on a sound and efficient investment and financing environment. Although China’s commercial aerospace investment and financing system has achieved initial progress, it still faces multiple challenges, including imbalanced capital structure, insufficient risk-sharing mechanisms, and weakened market incentives, which constrain industrial innovation and competitiveness. This study systematically analyzes the current status and main challenges of China’s commercial aerospace investment and financing environment and draws on international experience to propose following optimization strategies. First, improve the structure of capital supply and expand diversified financing …

Analysis Of Status, Challenges, And Optimization Recommendations For China’S Commercial Space Policy Support System, Liming Ge, Zixuan Liu, Mingda Yang, Wenbin Ma

Bulletin of Chinese Academy of Sciences (Chinese Version)

As a strategic pillar in building a space power, commercial space has become a new frontier for global technological competition. The Chinese government and relevant regulatory authorities have introduced a series of multi-level policy documents, propelling the commercial space sector into a phase of vigorous development. This study systematically reviews the background, evolution, and implementation outcomes of China’s policy support system for commercial space. It is indicates that, in light of the goal of becoming a “space power” and the future industrial competition, China’s policy support system for commercial space still faces challenges such as ineffective policy implementation mechanisms, lack …

How Does Original And Disruptive Innovation Lead Modern Industrial System: Insights From Revolutionary Frontier Of Next-Generation Chip Manufacturing Technology, Jiang Yu, Yue Guo, Shiguang Li

Bulletin of Chinese Academy of Sciences (Chinese Version)

Original and disruptive innovation is the foundation for tackling key technological challenges and nurturing the development of new forms of productive forces. The breakthrough of FinFET (Fin field-effect transistor) technology, a frontier manufacturing process for chips, represents a typical example of original and disruptive innovation. This breakthrough extended Moore’s Law, catalyzed the transition of semiconductor manufacturing from 2D to 3D structures, and significantly advanced the global high-tech industry, positioning it at the core of international technological competition. This study reviews the breakthrough journey of FinFET technology, specifically focusing on its development stages from “scientific discovery—formation of new technological pathways—systematization of …

Beyond Innovation Paradox: Practices And Reflections On Promoting High-Quality Development Of Commercial Aerospace With Low Costs, Chao Zhang, Qianshu Shi, Binbin Meng, Quan Cheng, Jun Zhao, Weitao Wu

Bulletin of Chinese Academy of Sciences (Chinese Version)

Commercial spaceflight, as a national strategic emerging industry, is critical for seizing the high ground of the space economy and fostering new quality productive forces through its low-cost and high-quality development. Currently, international enterprises represented by SpaceX have gained a leading advantage through technological breakthroughs and business model innovations, posing severe challenges to China’s aerospace security and development. This study first analyzes the evolutionary trajectory of low-cost development in commercial spaceflight, then delves into the “low-cost vs. high-quality” innovation paradox faced by the traditional aerospace industry and its root causes. Building on this analysis, it examines the experiences of international …

Research On Strategies For High Quality Development Of New Power Systems, Xiaohong Chen, Junpeng Li, Yongmei Liu

Bulletin of Chinese Academy of Sciences (Chinese Version)

New power systems are at a critical stage of transition from theory to implementation. Against the backdrop of accelerating global energy transformation and technological revolution, shifting the energy system from “scale-oriented” to “quality-driven” is both an urgent need and a key focus for advancing the high-quality development of China’s new power systems. This study employs a four-dimensional analytical framework integrating “technology-elements-industry-green transition” to identify the main challenges existing in the new power systems currently, including constraints in key technologies, imbalances in factor allocation, difficulties in industrial coordination, and instability in power supply structure. Targeted measures are proposed accordingly. (1) Strengthening …

Remedios Varo, Diseñadora Y Publicista, Carmina López Sánchez, M. Mar Martínez-Oña

GDI. Revista de investigación de Género, Diseño e Innovación

El presente artículo analiza las obras de la pintora surrealista Remedios Varo Uranga, siendo el objeto de estudio el análisis de su trabajo como diseñadora y publicista, concretamente de los diseños realizados para la empresa Bayer. Por ello, a través de diferentes metodologías como la revisión bibliográfica, la catalogación junto con los métodos histórico e iconográfico se profundiza en el análisis de algunos de estos trabajos publicitarios. Pretendiendo con ello, visibilizar no solamente la labor artística de Remedios Varo, sino valorar su trabajo como diseñadora donde presenta características iconográficas y estéticas similares a su obra surrealista creando entonces, una publicidad …

Integrating Humanities Into Cybersecurity Education: Enhancing Ethical, Historical, And Sociopolitical Understanding In Technical Training, Joseph Frusci

Journal of Cybersecurity Education, Research and Practice

The increasing complexity of cybersecurity challenges necessitates a holistic educational approach that integrates both technical skills and humanistic perspectives. This article examines the importance of infusing humanities disciplines such as history, ethics, political science, sociology, law, and anthropology—into cybersecurity education. Through a pilot course developed for Staten Island Technical High School, aligned with the New York State K-12 Computer Science and Digital Fluency Standards, students were introduced to an interdisciplinary curriculum that combined technical cybersecurity training with historical analysis, ethical reasoning, and sociopolitical context. The results of pre- and post-course assessments demonstrated significant improvements in critical thinking, ethical decision-making, and …

A Method For Key Node Identification In Operational Target System Based On War Gaming, Yongfu Zhang, Yang Liu, He Yuan

Journal of System Simulation

Abstract: The identification of key nodes in an operational target system is an important basis for combat command decision-making. Due to the lack of experimental verification of key node identification in the current operational target system in a campaign-level dynamic confrontation environment, a complex network model of operational target system with large-scale entities and complex interaction relationship was constructed by taking integrated air defense network as an example, with the help of the data derived from the large joint war gaming; the characteristics of wargame data were considered, and the value characteristics of combat targets and network structure characteristics were …

Platform Path Optimization Method Based On Cumulative Detection Probability Of Sonar Search, Xiang Wei, Xingxuan Liu, Dianzheng Fu, Tianji Yang, Jiaxuan Yang

Journal of System Simulation

Abstract: To address the lack of research on the optimal path of mobile search platform to search for moving targets, this paper proposes a path optimization method of mobile search platform based on cumulative search probability theory. Based on the cumulative detection probability (CDP), one of the important criteria of sensor performance evaluation, a single-peak CDP calculation formula is constructed by using a time series correlation model, namely the (λ, σ) process model. A set of target motion scenarios are constructed, and the trajectory probability of target scenarios and their CDP at different time are corrected by Bayesian posterior probability. …

Modeling For Decision Support Of Flight Ground Support Process, Zhiwei Xing, Ruiwen Yu, Biao Li, Zhaoxin Chen

Journal of System Simulation

Abstract: Aiming at the problems of insufficient decision-making ability and low operational efficiency of the flight ground support process, a decision support model of the flight ground support process based on the department of defense architecture framework (DoDAF) is proposed. Starting from the support operation, support resources, and the relationship between them, the quantitative description of the flight ground support process is performed. DoDAF and the model-based systems engineering (MBSE) modeling method are combined to establish a decision support model of the flight ground support process. The decision utility function is established to analyze the utility value of the comprehensive …

End-To-End Motion Planning Of Unmanned Vehicles Based On Multimodal Deep Reinforcement Learning, Kaiyuan Ding, Askar Hamdulla, Bin Zhu, Eksan Firkat, Zhengtang Ma

Journal of System Simulation

Abstract: Since the agent cannot sense the surrounding environment and cannot successfully avoid obstacles, reinforcement learning fails to be generalized to robot motion planning in difficult terrain. Therefore, a solution based on multimodal deep reinforcement learning, which learns to blend proprioceptive states with high-dimensional depth sensor inputs, is proposed for the motion planning of unmanned vehicles. To be specific, proprioceptive states offer contact measurement for immediate reaction, and the unmanned vehicle can learn and forecast environmental changes with its attached visual sensors, proactively navigating around obstacles and uneven terrains numerous time steps ahead. TransProAct (transformer-based proactive action), a unique end-to-end …