Engineering Commons^™

Recent Advances In Non-Enzymatic Electrochemical Sensors For Theophylline Detection, Gustria Ernis, Yulia M T A Putri, Muhammad Iqbal Syauqi, Prastika Krisma Jiwanti, Yeni Wahyuni Hartati, Takeshi Kondo, Qonita Kurnia Anjani, Jarnuzi Gunlazuardi

Journal of Electrochemistry

Detection of target analytes at low concentrations is significant in various fields, including pharmaceuticals, healthcare, and environmental protection. Theophylline (TP), a natural alkaloid used as a bronchodilator to treat respiratory disorders such as asthma, bronchitis, and emphysema, has a narrow therapeutic window with a safe plasma concentration ranging from 55.5–111.0 μmol·L^–1 in adults. Accurate monitoring of TP levels is essential because too low or too high can cause serious side effects. In this regard, non-enzymatic electrochemical sensors offer a practical solution with rapidity, portability, and high sensitivity. This article aims to provide a comprehensive review of the recent developments …

Study On Dopamine Electrochemical Sensing Based On Au@Mos2, Ning An, Ni Su, Xin-Ran Li, Jian-Yu Liu, Qi-Yan Wang

Journal of Electrochemistry

Dopamine (DA) is a vital neurotransmitter, and accurate detection of its concentration is critical for both clinical diagnostics and neuroscience research. Due to its electrochemical activity, DA is commonly detected using electrochemical methods, which are favored for their simplicity, fast response time, and suitability for in vivo analysis. In this work, a highly sensitive DA electrochemical sensor was developed using an Au@MoS₂ composite, created by modifying molybdenum disulfide (MoS₂) nanosheets with gold nanoparticles through HAuCl₄ reduction, and it was aimed at enhancing DA adsorption and improving detection performance. Scanning Electron Microscopy (SEM), transmission electron microscopy (TEM), …

In-Situ Electrodeposition Of Feco-Mof On Au Ultramicroelectrode For Highly Sensitive Detection Of Epinephrine, Yan Chen, Shang Jian, Si-Yu Wan, Xiao-Tong Cui, Zhong-Gang Liu, Zheng Guo

Journal of Electrochemistry

Metal-organic framework (MOF) nanostructures have emerged as a prominent class of materials in the advancement of electrochemical sensors. The rational design of bimetallic MOF-functionalized microelectrode is of importance for improving the electrochemical performance but still in great challenge. In this work, the bimetallic FeCo-MOF nanostructures were assembled onto a gold disk ultramicroelectrode (Au UME, 5.2 μm in diameter) via an in-situ electrodeposition method, which enhanced the sensitive detection of epinephrine (EP). The in-situ electrodeposited FeCo-MOF exhibited a characteristic nanoflower-like morphology and was uniformly dispersed on the Au UME. The FeCo-MOF/Au UME demonstrated excellent electrochemical performance on the detection of EP …

Web Application For Simulation Of An Agent-Based Model In Netlogo3d, Chris Davis Perumal, Abraham Nofal, Benedict J. Kolber, Rachael Miller Neilan

Spora: A Journal of Biomathematics

Agent-based models (ABMs) are computer simulation models for studying systems of autonomous agents. Modelers often use specialized software like NetLogo to develop ABMs, but this software poses barriers to researchers in other disciplines with no prior programming experience. To address this issue, we developed a web application that allows users to simulate our ABM via a web browser, eliminating the need for the user to download and use specialized software. While presented in the context of a specific ABM, our approach can be applied to other ABMs to enhance accessibility. The ABM presented here was developed in NetLogo3D. The model …

Retracted: Image Denoising: Smooth Total Variation Minimization For 5g Enhanced Mobile Broadband Transmission System, Shehab Ahmed Ibrahem, Walled Khalid Khalid Abdulwahab, Moceheb Lazam Lazam Shuwandy

Iraqi Journal for Computer Science and Mathematics

Image denoising is an important area of computer vision. Rudin-Osher-Fatemi model based on a gradient is one of the simplest models used in image denoising to solve the problem of restoring the clear image. The challenge in solving this model is the non-differentiability of Total Variation function (TV-function) minimization. Image transmission is widespread over wireless systems, including the fifth generation (5G) cellular network. Transmission impairment can affect transmitted images, including noise, attenuation, and distortion. This study proposed a new smoothing technique to make the TV-function differentiable and smooth. The new smoothed function was used for de-noising images with the help …

War Strategy Algorithm- Based Hybrid Optimization For Accurate And Rapid Speech Recognition, Shahad Thamear Abd Al-Latief, Salman Yussof, Azhana Ahmad, Saif Mohanad Khadim, Ahmed Alkhayyat

Iraqi Journal for Computer Science and Mathematics

Speech recognition-based applications increased and developed as a result of artificial intelligence's rapid growth, particularly Machine Learning, which play a crucial role in many aspects of daily life, such as applications related to human-computer interaction, and natural language processing. The complexity and diversity of speech signals provides challenges in maximizing the rate of accuracy and efficiency of speech recognition systems. Hyperparameter tuning is a crucial step in machine learning that has a significant role in optimizing the performance and generalization by determining the optimal values for the model's hyperparameters. This paper employed the recently developed WAR Strategy optimization algorithm for …

Hybrid Methods For Detecting Face Morphing Attacks, Essa M. Namis, Khalid Shaker, Sufyan Al-Janabi

Iraqi Journal for Computer Science and Mathematics

The face morphing process blends two or more facial images to produce a singular morphed facial image that shows the vulnerabilities of Face Recognition Systems (FRS). The widespread use of facial recognition algorithms, especially in Automatic Border Control (ABC) systems, has elicited concerns about potential attacks, as modified passports pose a significant risk to national security. This research presents a hybrid approach for feature extraction from facial images. The suggested approach involves three stages: The initial phase involves preprocessing the image through resizing and face identification, using the Viola-Jones algorithm to detect and locate the human face in the image, …

Finding General Mathematical Formulas For Extraction The Minimal Path Sets Of Complex Parallel-Series Networks, Mariem Hassan Lafta, Zahir Abdul Haddi Hassan

Iraqi Journal for Computer Science and Mathematics

Most real-world technological systems are highly complex, making it challenging to examine their reliability. Many systems can be represented as Complex Parallel-Series Networks (CPSN). The large number of components and subnetworks, along with their intricate connection, complicates the identification, evaluation, and potential failure of the CPSN. A minimal path set is a minimal set of components whose proper functioning (success) guarantees the success (operability) of the system. The set is minimal in the sense that removing any component from it means it no longer guarantees system success. The primary research problem is to identify these minimal path sets, both for …

Aircraft Leasing And Its Effects On Ireland's Airline Sector, Aaron Christian, Jeanne Sumrall

SACAD: Scholarly Activities

The aircraft leasing industry sits at the heart of Ireland’s aviation sector, making Ireland the global leader in the business. The presence of major leasing companies’ headquarters, including Avolon, SMBC and AerCap, in Ireland, allows for country to benefit from these companies’ revenue. In return, Ireland provides the companies with supportive tax and regulatory frameworks that benefit the aviation sector. The research on this topic explores different ways aircraft leasing contributes to airline efficiency through cost reductions and fleet modernization while minimizing financial risks associated with aircraft acquisition by utilizing computer programs. Operational modeling has become an essential tool for …

Generalized Plant Disease Detection Using Residual Networks With Eca And Senet Integration, Asmaa Aly Hagar, Marwa Reda Bastwesy, Reda Elbasiony, Mohamed Talaat Faheem

Journal of Engineering Research

Early and accurate detection of plant leaf diseases is crucial for safeguarding agricultural productivity and ensuring food security. Traditional methods of plant disease detection, which often rely on manual inspections and specialized models, encounter challenges such as limited scalability, data annotation difficulties, and task-spe-cific constraints. This paper introduces two innovative and general-ized approaches for plant disease detection by combining Residual Networks with channel attention modules. The first approach inte-grates ResNet-101, the Efficient Channel Attention (ECA) mecha-nism, and the Squeeze-and-Excitation Network (SENet), while the second combines ResNetRS-101 with the ECA mechanism. These models leverage the strengths of ResNets, the dynamic channel …

Mechanical Properties Of High Strength Geopolymer Concrete Incorporating Silica Fume And Hybrid Fibers, Ahmed Hamed Elmaadawy, Elsaid Abd-Elsalam Maaty Prof.Dr, Ahmed Mohamed Tahwia Prof.Dr, Amr Zaki Elkady Doctor

Journal of Engineering Research

ABSTRACT

Geopolymer is considered to be an eco-friendly binder and replacement for ordinary Portland cement as it leads to a reduction in CO2 emissions and energy saving.This study investigates the mechanical properties of geopolymer concrete, focusing on its early-age (7 and 28 days) and late-age (56 days) mechanical performance. Four experimental groups were designed, each incorporating different material compositions to assess their influence on compressive strength, splitting tensile strength, flexural strength and to develop optimal mix proportions for geopolymer concrete that balance mechanical performance, minimizing the carbon footprint while maximizing strength .A total of nine fly ash-based geopolymer mixtures designs …

Experimental Investigation Of Multi-Cell Column Foun-Dations Under Bending Loads, Mostafa Abdo Abdllah Sharp

Journal of Engineering Research

This study investigates the structural behavior of connections between multi-cell columns and foundations under bending loads. The term "multi-cell" refers to sections with multiple longitudinal hollow cores separated by thin webs. A total of eight specimens were modeled and analyzed using the finite element software ABAQUS/CAE [1], under a single loading line system until failure. To facilitate this study, a control specimen was created as a benchmark, enabling the assessment of various parameters' impact on the connection. These parameters include embedment depth, the number of cells in the column, the presence of shear studs, internal plates, and concrete infill within …

Impact Of Nanoparticles On Performance Of Metakaolin-Based Geopolymer Mortar, Habiba A. Mohamed, Mohamed R. Sakr, Mohamed O. R. El Hariri

Journal of Engineering Research

In response to the growing demand for sustainable construction materials, this study explores the transformative potential of nanoparticles, specifically nano silica and Nano clay, to enhance the mechanical and durability properties of metakaolin-based geopolymer mortar without heat curing. Geopolymer mortars incorporating 2.5% and 5% Nano silica and Nano clay were evaluated for compressive strength, tensile strength and water absorption. Mixture with 5% nano silica exhibited the most significant improvements, achieving compressive and tensile strengths of 36 MPa and 3.5 MPa, alongside the lowest water absorption of 4.65%. X-ray diffraction (XRD) and scanning electron microscopy (SEM) further confirmed the formation of …

Enhancing Gas Cyclone Performance With Exit Diffusers, Omar Mohamed Mourad Dwidar, Yasser El-Shaer, Khairy Elsayed, Seyyed Hossein Hosseini, Goodarz Ahmadi

Journal of Engineering Research

This study evaluates seven cyclone designs to enhance pressure drop and collection efficiency (CE), using the conventional cyclone as a baseline. While the conventional design is efficient in particle collection, it experiences significant energy losses due to high values of pressure drops. This study introduces exit diffusers with various configurations—A, B, C, D, E, and F—to improve cyclone performance. Computational Fluid Dynamics (CFD) simulations were used to analyse the pressure drop, tangential velocity, and static pressure at different levels of each cyclone. The findings reveal that cyclone D achieves a 41.1% reduction in pressure drop but at the cost …

A 0.18 Μm Cmos 40 Ghz Miniaturized Coupled-Line Coupler With Enhanced Directivity, Elsayed Ibrahim Elsaidy, Amr H. Hussein Prof.Dr., Mustafa M. Abd Elnaby Prof. Dr., Anwer S. Abd El-Hameed Dr.

Journal of Engineering Research

No abstract provided.

Numerical Study Of Local Scour Around Inclined Bridge Piles Under Wave Conditions, Elsayed Mosaad Shewakh, Ibrahim Mohamed Rashwan, H. Omara

Journal of Engineering Research

Scouring is an issue of interest in the bridge design process, in reality many inclined piers are used. Moreover, scour prosses around inclined piers have non-uniform behaviour depending on its exposure of their foundation into the flow field. The mean purpose of this paper is to study the flow and local scour evolution around the inclined piers to the flow under waves conditions using numerical work. For this purpose, a hydrodynamic and morphological three-dimensional model using RANS equations, and the turbulence k-ε model is used. The inclination direction affects both the strength and location of the scour. Different value of …

Performance Evaluation Of Novel And Efficient Integration Of Solar-Assisted Hvac System With Solar Humidification-Dehumidification Desalination System, Ahmed M. Khaira, Ahmed Hossam, M. M. Bassuoni, Mohamed Abdelgaied

Journal of Engineering Research

This paper aims to study the performance of a novel and efficient integration of a solar-assisted HVAC system with a solar humidification-dehumidification desalination system for hot climates. The proposed hybrid system aims to achieve thermal comfort conditions, produce freshwater, reduce the required power input, and reduce environmental pollution. To achieve this idea, we designed, constructed, and tested the novel hybrid system consisting of a solar-assisted HVAC system incorporated with a solar humidification-dehumidification desalination system. The device takes the rejected hot air that has passed over a solid desiccant and feeds it into a solar still to extract fresh water, while …

The Performance Of Different Systems In Resisting Seismic Loading For High Rise Concrete Structures, Samy A. Fawzy

Journal of Engineering Research

High-rise buildings are subjected to gravity and mostly lateral loading from seismic and wind loads that affect the behavior of such structures. In this study, we will deal with the seismic behavior of different concrete systems. Moment resisting frame, Shear wall, global bracing and dual system are used in this study. A 3D model in static and dynamic analysis was done using ETABS software then a pushover analysis and a parametric study as well for different systems. The study proved that the case of moment resisting frame is the worst in resisting displacements and drift as well. Although the model …

Controlling Verticality Of High-Rise Buildings Using Gnss Techniques Integrated With Laser Plummet, Nasr Mohammady Saba, Yanqing Gao Yanqing, Salem Salama Saleh

Journal of Engineering Research

Maintaining vertical alignment is crucial in the construction of high-rise buildings (HRBs). Traditionally, construction teams use laser plummets to transfer reference point coordinates from the foundation to each floor through openings in the concrete slabs. However, as building height increases, the accuracy of the laser beam can be affected, necessitating verification. In an urban development project in Al Alamein, Egypt, the use of the Global Navigation Satellite System (GNSS) was proposed to monitor verticality during construction. For the 270-meter-tall T-TOWER, nine monitoring points were established on the foundation to define the building’s axes for each slab. These points were transferred …

A Generalized Plant Disease Detection Technique Based On Residual Network With Efficient Channel Attention, Asmaa Aly Hagar, Marwa Reda Bastwesy, Reda Elbasiony, Mohamed Talaat Saidahmed

Journal of Engineering Research

The detection of plant diseases a vital task for ensuring crop health and optimizing agricultural productivity. Machine learning and computer vision have significantly advanced the automation of plant disease detection. However, traditional methods face several challenges, particularly with data annotation and the limitations of task-specific models, which often fail to generalize across different plant diseases. These methods are hindered by their reliance on models tailored to individual crops and the ongoing need for manual inspections, leading to inefficiencies and restricted scalability. This study proposes a method designed to enable the efficient and accurate identification of a broad range of plant …

Numerical Analysis Of Cold-Formed Built-Up Battened Steel Columns Under Eccentric Compressive Loading, Mai Mohamed Sheta, Hanan Hussein Eltobgy, Mohamed Massoud El Saadawy, Khaled Abdallah Gharib

Journal of Engineering Research

This paper presents a 3D finite element model simulation using ABAQUS finite element software to investigate the behavior of steel battened beam columns under uniaxial loads. The columns consist of double-channel cold-formed slender open sections. The study highlighted the effects of various factors on the ultimate capacity of these beam-column members.

By considering both global and local imperfections, the model focuses on the structural strength and performance of battened cold-formed steel columns made from built-up sections. These cold-formed steel (CFS) columns have a slenderness ratio ranging from 50 to 162. Axial loads are applied at the pin-ended support of the …

Non-Linear Analysis Of Axially Loaded Built-Up Open Section Cold-Formed Columns, Mai Mohamed Sheta, Hanan Hussein Eltobgy, Mohamed Massoud El Saadawy, Khaled Abdallah Gharib

Journal of Engineering Research

Built-up open cold-formed sections are commonly used in entrances, structural corners, and window frames. These elements exhibit low torsional stiffness and are highly susceptible to cross-sectional deformation. Battened built-up cold-formed steel (CFS) open columns offer enhanced load-carrying capacity when individual profiles cannot withstand applied loads.

Extensive research has focused on understanding the buckling behavior of these structural elements. However, limited studies have explored the impact of spacing between cold-formed C-channel sections. Existing research suggests that battened columns with adequately spaced members exhibit superior structural performance compared to those with closely spaced channels.

A critical factor affecting the performance of battened …

Design And Development Of A Low-Cost Educational Robot: A Scalable And Affordable Software Learning Platform, Diana Refaat Henry Jacob, Mohamed Tarek Elawa, Ashraf Mohamed Hafez

Journal of Engineering Research

This study presents the design and development of a low-cost educational robot to enhance learning experiences in robotics and programming. The system integrates robust software development, ensuring seamless interaction between sensors, actuators, and a custom-designed graphical user interface (GUI). The robot is equipped with various sensors and actuators to support a broad range of experiments and educational applications. The software architecture is detailed, focusing on its modularity and ease of use, enabling students to intuitively program and interact with the robot. Additionally, a series of experiments were conducted to evaluate the performance of the sensors and actuators, providing insights into …

Using Sheet Piles To Control Contaminant Transport From Different Sources Through The Soil, Eslam Kashef Elgmmal Eslam K. Elgmmal, Ibrahim Mohamed Rashwan, H. Omara

Journal of Engineering Research

Contaminants can reach the excavation site and lead to groundwater contamination. The present research investigates the effect of using sheet piles for controlling the migration of contaminants to excavation sites that require high-quality groundwater, taking into consideration changing concentrations of contaminants and changing soil surface depth downstream of the sheet piles. The arrival time of contamination to reach under the sheet piles and the time for reaching contamination to the excavation site were studied. Additionally, the effect of using two different sources of contaminants with different concentrations on the mixing time between them through groundwater was investigated. Two modules, SEEP/W …

Numerical Study For Strengthening Hexagonal Castellated Steel Beams Using Hexagonal Ring Stiffeners, Amany M. Morad, Omnia F. Kharoub, Nashwa Yossef

Journal of Engineering Research

This paper investigates numerically how the castellated steel beams are affected by the addition of hexagonal stiffeners around hexagonal web openings. Increasing the CSBs' load-bearing capacity and improving their overall structural behavior are the main objectives of this strengthening technique. Although there are different failure modes as a result of castellation, the main emphasis of this study is web post-buckling. Using ABAQUS software, a 3D finite element model is created to analyze the beam's behavior. The model's accuracy was validated by comparing its results with those from previous experimental studies. Failure loads, failure modes, and load-deflection curves of CSBs are …

Influence Of High Temperature On Geopolymer Powders Concrete, Hesham W. Monier, Elsaid A. Maaty Professor Doctor, Mohammed Elsayed Elsharkawy Assis. Prof.

Journal of Engineering Research

A recent advancement in building construction is geopolymer concrete (GP), which uses pozzolanic materials like fly ash in place of cement and is activated by an alkaline solution. This study evaluates the impact of various parameters on the compressive strength of geopolymer concrete (GP) by analyzing experimental results from nine GP mixtures. In this study, the effects of two different fibers—steel and polypropylene—were used to calculate the impact of additional fibers on geopolymer concrete following exposure to temperatures of 200 , 400 , and 600° C.

Examining the impacts of two ratios of silica fume (10 and 20%)

The durability …

Numerical Investigation Of Heat Transfer And Pressure Drop In A Circular Microchannel Using Sio₂ Nanofluids, Mahmoud G. Abdelfatah, Osama E. Abd-Ellatif, Ahmed A. A. Attia, Abdelrady O. Elnady

Journal of Engineering Research

A numerical investigation was conducted to analyze the flow characteristics and heat transfer performance of a circular microchannel. using water and SiO₂+pure water nanofluids with volume fractions of 0.3%, 0.7%, and 1%. The microchannel was subjected to a constant heat flux of 100W, and the pressure drop, friction factor, and thermal resistance were evaluated for different Reynolds numbers ranging from 250 to 850. The results show that the addition of SiO₂ nanoparticles enhances the thermal performance of the microchannel by reducing the thermal resistance by up to 1.9% compared to pure water. However, the pressure drop increases with higher Np …

Water Quality Assessment Of Irrigation Streams Within Dakahlia Governorate, Egypt, Mahy Adel Elbialy, Ibrahim Mohamed Rashwan, Saleh Shalaby, Ahmed Shalby

Journal of Engineering Research

Water quality degradation is a major global concern and a significant threat to human health. In Egypt, extensive agricultural runoff enriched with fertilizers, pesticides, and herbicides endangers the aquatic ecosystems. Accordingly, a reliable water quality monitoring and assessment program is crucial for formulating a management strategy aimed at water resource protection. Indeed, water quality assessment implies a challenge in identifying sampling locations, frequencies and monitored parameters. This paper aims to report on the water quality state of some irrigation streams in the Dakahlia governorate, Egypt. A systematic monitoring program was implemented through three field campaigns conducted in November 2023, February …

The Effect Of Hot Machining Of Difficult-To-Machine Materials On The Form Accuracy In The Turning Process, Ahmed Yehia Kamal, Samy F. M. Assal, Ahmed M. El-Kassas, Ahmed A. Hawam

Journal of Engineering Research

Form accuracy of machined parts is crucial to the interchangeability in production as well as the function of the part and its expected useful life. Numerous studies investigated the form accuracy in traditional machining operations but none of them considered this issue in hot machining. In this technique, a difficult-to-machine workpiece is preheated to soften its material and reduce the cutting force. In this paper, the form accuracy represented in roundness, tape, and straightness of hot turned AISI 304L parts are investigated. The results showed that the hot condition has a minimal effect on the form accuracy which confirms the …

Non-Orthogonal Multiple Access Empowered Physical Layer Security Systems: Review, Issues And Challenges, Aml Fawzy, Mahmoud Selim, Maha Elsabrouty, Sameh Napoleon, Mustafa M. Abd Elnaby

Journal of Engineering Research

As 5G networks advance, the demand for higher data rates, enhanced spectral efficiency, and increased connectivity intensify. Non-orthogonal multiple Access (NOMA) addresses these needs by allowing multiple users to share the same time and frequency resources, thus optimizing network resource utilization and significantly boosting system capacity and throughput. NOMA's influence extends beyond traditional communication scenarios, impacting various vertical industries that require extensive connectivity, such as the Internet of Things (IoT). This transformative approach is crucial for industrial and critical mission applications. Given the importance of safeguarding these communications from potential eavesdroppers, Physical Layer Security (PLS) emerges as a vital tool. …