Engineering Commons^™

Heat-Treatment Behavior Of High-Palladium Dental Alloys, Qiang Wu, William A. Brantley, John C. Mitchell, Stanley G. Vermilyea, Jianzhong Xiao, Wenhua Guo

Cells and Materials

Four high-palladium dental alloys were cast, quenched following solidification, and heat treated at temperatures ranging from 200° to 1,800°F. The Vickers hardness of each alloy was measured, and microstructural changes were studied by scanning electron microscopy (SEM). Phase transformations were investigated by thermomechanical analysis (TMA). Heat treatment at 1,600° and 1,800°F significantly decreased the hardness of one Pd-Cu-Ga alloy, compared to the as-cast condition, as did heat treatment at 1,800°F for the other Pd-Cu-Ga alloy and one Pd-Ga alloy, and yielded fine-grained microstructures of the palladium solid solution. There were generally no significant changes in the hardness of the other …

A Quantitative Method Of Measuring Cell-Substrate Adhesion Areas, R. G. Richards, G. Rh Owen, B. A. Rahn, I. Ap Gwynn

Cells and Materials

Variability in measurements of the 'cell adhesion strength' of fibroblasts to substrates using mechanical disruption techniques causes difficulty in determining precisely the position, in the cytoskeleton-focal adhesion-matrix -substrate interface, where failure has occurred. In the present study, a quantitative in vitro procedure for measuring the total area and percentage of fibroblast adhesion to biomaterials, using the scanning electron microscope (SEM), is described. The amount of adhesion ofL929 and Balb/c3T3 fibroblasts to discs of stainless steel, commercially pure titanium, and polyethylene terepthalate (Thermanox) was quantified. Cells were fixed, stained with heavy metals, dehydrated and embedded in resin. The resin blocks were …

Beta-Tricalcium Phosphate Resorption By Monocytes In Biphasic Calcium Phosphate: An In Vitro Study, Wolf Bohne, Jean A. Pouëzat, Dorothea Pouëzat, Guy Daculsi

Cells and Materials

A macroporous biphasic calcium phosphate (BCP) of 60.7% carbonated dense non-porous hydroxyapatite (HA)/39.3% dense microporous ß-tricalcium phosphate (ß-TCP) was immersed during 15 days in a supplemented a-MEM (minimal essential medium) solution with and without dog bone marrow cells obtained by punction. The aim of the study was to demonstrate the time-related changes in the BCP fractions by means of X -ray diffraction, infrared spectroscopy and scanning electron microscopy, and to investigate the cell populations. The HA/ß-TCP ratios varied according to immersion duration and cell presence. If any, there was a slight preponderance of ß-TCP …

Transmission Electron Microscopical Study Of Fibroblast Attachment To Microtextured Silicone Rubber Surfaces, E. T. Den Braber, J. E. De Ruijter, H. J. E. Croes, L. A. Ginsel, J. A. Jansen

Cells and Materials

Cellular attachment has been suggested to be highly influenced by the micromorphology of the substratum surface. To test this hypothesis, smooth and microtextured silicone substrata were produced, which possessed parallel surface grooves with a groove and ridge width of 2.0 (SilD02), 5.0 (SilD05), and 10 µm (SilD10). Groove depth was approximately 0.5 µm. After culture of rat dermal fibroblasts (RDFs) on these substrata for 3 and 5 days, the samples were prepared and sectioned for transmission electron microscopy with a specially developed preparation technique. On the SilD02 and SilD05 surfaces, it was found that the RDFs attached to …

Mechanism For Formation Of Lamellar Constituents In Grain-Refined Pd-Cu-Ga Dental Alloys, William A. Brantley, Zhuo Cai, John C. Mitchell, Stanley G. Vermilyea

Cells and Materials

Grain-refined Pd-Cu-Ga dental alloys solidify with a lamellar microstructural constituent that affects a variety of clinically relevant properties. While formation of this constituent has been attributed to eutectic solidification, an alternative mechanism of discontinuous precipitation has been proposed. Using a representative grain-refined Pd-Cu-Ga dental alloy, casting procedures involving two different rates of solidification were used: (a) A standard thin-walled coping configuration for a metal-ceramic restoration was cast into a room temperature mold, followed by rapid quenching into an ice-water mixture. (b) A thin plate specimen was cast into a standard elevated-temperature mold, with the same subsequent rapid quenching procedure. Neither …

Biofilms In Dental Unit Waterlines: Ultrastructural And Cytochemical Analysis, J. Barbeau, C. Avezard, E. Faucher, S. Zalzal, A. P. Prévost

Cells and Materials

Dental unit waterlines are heavily colonized by bacteria which contaminate the water used to perform intra-oral, and sometimes invasive, procedures. There is little information on the nature of the biofilm colonizing the flexible plastic tubing used to supply water to the different handpieces. We have therefore undertaken quantitative microbial analysis and ultrastructural studies of these biofilms by direct counting with the epifluorescent filter technique and by transmission and scanning electron microscopy after staining with ruthenium red and periodic acid-thiosemicarbazide-silver proteinate to visualize the composition and the distribution of exopolysaccharides and intracellular polysaccharides. The biofilm was revealed as a non-uniform structure …

Maximum Individual & Vicinity-Average Dose For A Geologic Repository Containing Radioactive Waste, Thomas H. Pigford

RISK: Health, Safety & Environment (1990-2002)

Explains the basis for his strong dissent to an NAS report on Yucca Mountain.

Surface Modifying Additives Reduce Thrombogenicity: An In Vitro And Clinical Evaluation, H. T. Spijker, J. Haan, R. Graaff, P. W. Boonstra, W. Van Oeveren

Cells and Materials

To improve the biocompatibility of biomaterials a new surface treatment has been described based on the addition of polysiloxane containing copolymers to the base polymer resin (surface modifying additives). In an in vitro and a clinical study, we compared the thrombogenicity of polyvinyl chloride (PVC) to PVC with these surface modifying additives (SMA).

In the in vitro study, adsorption of thrombin and fibrinogen, binding of platelets and platelet release were measured on the tubing and were found reduced on SMA-PVC.

For the clinical study, we examined tubing material and blood collected after cardiopulmonary bypass (CPB). Onto the tubing, the binding …

Osteoclast Differentiation In Cocultures Of Chondrogenic Cell Line Rcj 3.1c5.18 And Mouse Or Rat Bone Marrow: Dependence On Culture Substrate And Association With Alkaline Phosphatase Positive Marrow Stromal Cells, G. I. Anderson, J. N. M. Heersche

Cells and Materials

We investigated the formation of tartrate-resistant acid phosphatase positive (TRAP+) colonies and multinucleated cells (MNCs) in rat and mouse marrow cultures alone and cocultured with the chondrogenic cell line, RCJ3.1C5.18 on different substrata. In mouse marrow cultured in 35 mm dishes, few TRAP+ MNCs developed, while in rat marrow cultures, many TRAP+ MNCs, which possessed calcitonin receptors and resorbed bone, developed. In both rat and mouse cultures, TRAP+ MNC first appeared at Day 4 and grew in number up to Day 8. When both marrows were cocultured with RC3.1C5.18 cells, TRAP+ colony numbers increased relative to marrow alone. In marrow …

Ultrastructural Observations Of Peri-Implant Mucosa Morphology Around Different Types Of Abutment In Humans, C. Piacentini, P. Lanzarini, R. Rodriguez Y Baena, S. Rizzo, C. Brusotti

Cells and Materials

Scanning electron microscopy (SFM) and transmission electron microscopy (TEM) were used to examine the morphological aspects of peri-implant mucosa around abutments of differing geometry (biconical and cylindrical) and of differing surface micromorphology. The samples were taken from seven patients who had undergone implant surgery at least one year prior to the study. In samples from biconical abutments, SEM of the sulcular epithelium showed that it consisted of flattened polygonal cells with a surface resembling a honeycomb. Superficial desquamation was rarely found. In contrast, in the samples from cylindrical abutments, the sulcular epithelium showed extensive desquamation and surface irregularity, but not …

Fractals, Surface Roughness, And Fracture Toughness Of Dental Composite And Unfilled Resin Fracture Surfaces, James L. Drummond

Cells and Materials

The intent of this project was to evaluate whether or not there exists a correlation between fractal dimension, surface roughness, and fracture toughness of an unfilled resin and a filled composite. The fracture surfaces of the unfilled resin and the filled composite were examined using atomic force microscopy (AFM) and a surface roughness measuring device. The specimens examined were aged in distilled water or air at 37°C for up to 12 months. Line scans of 1.4 µm for the atomic force microscope and 0.25 mm for the surface analyzer across the fracture surface were conducted on each specimen. Comparisons …

Bone Marrow Cell Colonization Of, And Extracellular Matrix Expression On, Biodegradable Polymers, C. E. Holy, M. S. Shoichet, J. E. Davies

Cells and Materials

Poly(DL-lactide-co-glycolide)s (PLGAs) have been proposed as substrata for bone tissue engineering. In the experiments reported herein, we sought to identify the optimum lactide to glycolide ratio, from the series 85:15, 75:25, 50:50, or poly-(DL-lactide) (PLA), for the elaboration of bone matrix by cultured rat bone marrow cells (RBMC) on two-dimensional substrates. Having identified PLGA 75:25 as the optimum for bone matrix elaboration by RBMC, we produced three dimensional foams from this copolymer. For the two dimensional substrata, glass coverslips were spin-coated with one of the PLGAs, or PLA. Cultures were maintained for two weeks. We employed a new technique to …

Alloy Oxidation And Porcelain Fused To Alloy Interaction In Noble Alloy Systems, M. S. Bapna, H. J. Mueller

Cells and Materials

The oxidation and porcelain fusion characteristics of noble alloys containing a variety of minor oxidizable elements, including Cu, Sn, In, Ga, Mn, and Fe were investigated. Four porcelain alloys systems: a Pd-base alloy (Naturelle}, two Pd-Ag-based alloys (Jelstar and Acclaim}, and a high Au-alloy (SMG-3) were examined by scanning electron microscopy and energy dispersive spectroscopy after being heat treated and after being fused with porcelain. Internal oxidation of minor alloying elements occurred within several micrometers from the surface in all four alloys. Surface nodules as detected by other investigators for a Pd-Ag alloy were also detected in this study. Evidence …

A Novel In Vitro Model To Study The Calcification Of Biomaterials, Q. Liu, J. Weng, J. G. C. Wolke, J. R. De Wijn, C. A. Van Blitterswijk

Cells and Materials

A novel in vitro model based on a solution mainly composed of sodium, calcium, chloride and phosphate ions, was developed to study the calcification of biomaterials at near physiological conditions. This model, due to its ability to quickly calcify the tested materials, is called Accelerated Calcification Solution (ACS). Polyactive ™ 30170, Polyactive™ 70/30 and its composites with nano-apatite were used as testing materials because of their known calcification behaviour. The results showed that Polyactive™ 70/30 and its composites could calcify in ACS in a relatively short period, while the polymer without filler failed to induce calcium phosphate precipitation in more …

Peripheral Nerve Regeneration And Functional Nerve Recovery After Reconstruction With A Thin-Walled Biodegradable Poly(Dl-Lactide-Ε-Caprolactone) Nerve Guide, M. F. Meek, W. F. A. Den Dunnen, H. L. Bartels, A. J. Pennings, P. H. Robinson, J. M. Schakenraad

Cells and Materials

The aim of this study was to evaluate functional nerve recovery after reconstruction of a 1 em gap in the sciatic nerve of the rat, with a thin-walled biodegradable poly(DLLA-ε-CL) nerve guide. To evaluate both motor and sensory nerve recovery, walking track analysis and electrostimulation tests were carried out after implantation periods ranging from 3 to 26 weeks post-operatively. The first signs of functional nerve recovery could already be observed after 5 weeks. From the histological analysis, it could be concluded that most of the thin-walled nerve guides had collapsed. Despite collapsing, functional nerve recovery was relatively good after 26 …

Thin Film Deposition Of Silicon For Solar Cell Applications, Sailesh Kumar, Roger M. Hawk

Journal of the Arkansas Academy of Science

Thin films of silicon have been formed using a patented electrostatic deposition method which utilizes charged particle motion in an electric field. After deposition, the films are heat treated for varying times and temperatures in a programmable furnace maintained under a purified argon atmosphere. X-ray diffraction (XRD) confirmed that these films were polycrystalline in nature. These films were found to have grain sizes of about 50 microns. Solar cells were fabricated using these large grained polycrystalline silicon films by sputtering pure gold as both front and back contacts. The cells have shown efficiencies of 1.8%. This paper reports on the …

Preparation Of Powder Precursors And Evaporation Of Photoconductive Indium Sulfide Films, Chris Barber, Robert Engelken, Brandon Kemp, Wasim Aleem, Imran Khan, Chris Edrington, Michael Buck, Clayton Workman, Anup Thapa, Tom Jakobs

Journal of the Arkansas Academy of Science

We have demonstrated significant photoconductance in indium sulfide thin films prepared by thermal vacuum evaporation ofIn2$3 powders synthesized in-house by chemical precipitation ofInCl3 or In(CH3COO)3, and (NH4)2S or Na2S. The Delta G lambda/Gdark values have been as high as 0.1 in the initial unoptimized films. Excess sulfur (via a mixture of polysulfide and sulfide ions in the synthesis bath) appears to be important in achieving reproducible and large photoconductivities. In2S3 is particularly attractive as a lower toxicity alternative to CdS in optoelectronic applications such as photovoltaic and photoconductive cells.

Teasing Apart The Threads Of Staple Strength, Andrew Peterson

Journal of the Department of Agriculture, Western Australia, Series 4

A successful partnership between two local inventors and Agriculture WA's Wool Program has created a new instrument which, just like the growth rings of trees, can show seasonal changes in the fibre diameter of wool. This will have considerable value to the wool industry as Andrew Peterson explains.

Academy Recommendations On The Proposed Yucca Mountain Waste Repository: Overview And Criticisms, Kristin S. Shrader-Frechette

RISK: Health, Safety & Environment (1990-2002)

Offers alternative criticism of the NAS report.

Bs News

Building Services Engineering

No abstract provided.

A Psychopolitical Analysis Of Situation Awareness: An Editorial, Ibpp Editor

International Bulletin of Political Psychology

The editor discusses aviation-related terrorism, situational awareness, and related psychological and human factors involved.

บทบรรณาธิการ

Journal of Transportation and Logistics (TRANSLOG)

No abstract provided.

การออกแบบเรือพระที่นั่งนารายณ์ทรงสุบรรณ รัชกาลที่ 9

Journal of Transportation and Logistics (TRANSLOG)

No abstract provided.

การออกแบบเรือดำน้ำ, อัณณพ ปาลวัฒน์วิไชย

Journal of Transportation and Logistics (TRANSLOG)

No abstract provided.

The Psychopolitics Of Language And Communication, Ibpp Editor

International Bulletin of Political Psychology

The editor discusses political issues connected by linguistic and communicative discord and controversy.

High Active Platinum Plated Titanium Electrode, Xiufeng Xiao, Zeshan Zhu, Yanzhen Chen, Wenyun Hu

Journal of Electrochemistry

To prepare the adherent and high active platinum plated titanium electrode, ultrasonic agitation technology and the best conditions of electrodeposition were adopted. Ultrasonic agitation technology can be improved the cohesion between coatings and substrate. The activity of electrode has related to the double layer capacity of electrode, which was due to the electrode rugosity.

Studies Of Electrochemical Behaviors Of Cytochrome C On Pretreated Gold Electrode, Jin Luo, Lingling Wu, Shaohua Huang, Zhonghua Lin

Journal of Electrochemistry

The quasi reversible responses of both adsorbed and bulk cytochrome c at the pretreated gold electrode are observed. The adsorption behaviors and reaction kinetics have been studied using in situ FTIR spectroscopy, UV/Vis reflection spectroscopy, voltammetry, AC impedance and potential step methods. The results show that the cytochrome c can irreversibly adsorb on the gold surface in a complete monolayer and the adsorbed layer can mediate the redox reaction of the cytochrome c in the solution in the absence of promoter.

Progresses In The Studies On Electrochemical And Surface Properties Of Hydrogen Storage Alloy Materials, Yong Yang, Jum Li, Zugeng Lin

Journal of Electrochemistry

Recent progresses in the studies on electrochemical and surface properties of hydrogen storage alloy materials are reviewed. This paper includes three sections: 1) Thermodynamic and kinetic studies of metal hydride electrodes, 2) Effects of micro structure and alloy elements of the materials on the electrochemical properties of the electrodes and 3) Correlation between surface properties of the alloy materials and performance of the negative electrode in the nickel metal hydride batteries.

Electrochemical Studies Of Cyanocobalamin On Silver Electrode, Zhai Jin, Yang Pin, Donghong Zheng, Junwei Zheng, Tianhong Lu

Journal of Electrochemistry

The electrochemical characteristics of cyanocobalamin were separately studied on smooth and roughed silver electrode. It was found that the reduction of cyanocobalamin is two one electron steps on roughed silver but one two electron step on smooth electrode. The reason is due to the ability of absorption of the surface of electrode.

Quantitative Evaluation Of Electrochemical Properties Of Mh Alloy By Powder Microelectrode, Ronghui Hu, Hanxi Yang, Jingcheng Liu, Shengxian Li, Chuanxin Cha

Journal of Electrochemistry

In this paper, a quantitative method by use of powder microelectrode combined with cyclic voltammetry and galvanostatic step is described for studying the electrochemical performance characteristic of hydrogen storage alloy(MH). Since the powder microelectrode uses only MH powder and has its depth and diameter of several tens of micrometer, the ohmic and concentration ploarization are greatly reduced and the influences of the technical factors in electrode preparation on the material performance are simply eliminated. Thus, with accurate determination of the load quantity of MH alloy in power microelectrode by absorption spectrometric technique, it is feasible to evaluate quickly and quantitatively …