Engineering Commons^™

A Blend Conducting Membranes For Direct Methanol Fuel Cells, Lei Li, Jun Zhang, Hong Wu, Yu-Xin Wang

Journal of Electrochemistry

An attempt was made to modify membranes for direct methanol fuel cells by blending Nafion or polystyrene sulfonic acid (PSSA) with polyvinylidene fluoride (PVDF) from their solutions. The proton conductivity and methanol barrier property as a function of the membrane compositions are discussed. Compared with the Nafion 117 membrane, the PVDF-Nafion blend membranes with 25 wt% of Nafion showed a decrease in the conductivity by about 2 orders of magnitude, and the methanol barrier properties increased about 3 orders of magnitude. If the ratio (σ/P) is adopted to characterize the performance of the membrane, the PVDF-PSSA and PVDF-Nafiion blend membranes …

Development Of 200～500 W Portable Proton Exchange Membrane Fuel Cell Power System, Li-Qing Hu, Li-Rong Zhou, Zheng Li, Jian-Wei Xia, Ming-Zhu Fu, Xin Wu, Yun Zhu

Journal of Electrochemistry

The Properties of the Portable PEM Fuel Cell Power Source are very unique compared with the common primary or rechargeable electro-chemical battery. This paper describes the In this work, of the 200～500 W portable PEM fuel cell power system, was developed. The system mainly composed of four subsystem: 1)Fuel cell stack; 2)Air delivery; 3)Hydrogen source; 4)Heat dissipation and system control.

Studies On Sulfate Reducing Bacteria Influenced Corrosion Of 90/10 Cu/Ni Alloy, Guang-Zhou Liu, Jian-Hua Qian, Yan Ma, Jian-Hua Wu

Journal of Electrochemistry

Electrochemical techniques such as measurements of corrosion potential,the polarization resistance, and potentiodynamic scanning technique were used to investigate the electrochemical behavior of 90/10 Cu/Ni alloy in Postgate C medium containing sulfate reducing bacteria(SRB). The results showed that the corrosion potential of the alloy changed from -0.20 to -0.75 V(SCE) when bacteria inocula was added, and the polarization resistance R_p decreased obviously, which corresponds to an increased corrosion rate. The shape ofthe anodic polarization curves was drastically changed in the presence of SRB, and an active-passive transition was observed. Electron probe microanalyzer was used to investigate the morphology and chemical …

Self-Assembled Monolayer Of Schiff Bases On Au Electrode, Ke-Qiang Ding, Qing-Fei Wang, Zhen-Bin Jia, Na Tian, Ning Wang, Ru-Ting Tong, Xin-Kui Wang, Hui-Bo Shao

Journal of Electrochemistry

Schiff bases tailored with -SH group, was self-assembled on Au substrate for the first time. The packing degree of this monolayer was described with SEM technique. Spontaneously, the self-assembled monolayer (SAM) was briefly characterized with CV and EIS methods. Though Comparing with the SAM of alkanethiol, the membrane we fabricated was relatively loose, our work is the first step to study Schiff bases by means of self-assembled monolayer.

Effect Of Cl- On The Transition Current Density Of Zn During The Electrodeposition Of Zn-Ni Alloys, Ren-He Yin, Zheng-Hua Fang, Wei-Min Cao

Journal of Electrochemistry

There exists a transition current density of Zn when the normal co-deposition of Zn-Ni alloys at chloride baths turns to anomalous type. The value increases with Cl^- concentration, but is independent of pH, this is because the existence of Cl^- decreases the evolution overpotential of Ni metal and has a catalytic effect on it.

An Investigation On Sr-Doped Spinel Phase-LisrXMn2-XO4, Hui Zhan, Yun-Hong Zhou

Journal of Electrochemistry

Sr-doped spinel phase-LiSr_xMn_2-xO₄ was successfully prepared by solid-state method. Structural and electrochemical characterizations were carried out. Although Sr²⁺ has a large ion radius-1.12 , the spinel structure can be well maintained for LiSr_xMn_2-xO₄ sample as far as the x value doesn't surpass 0.05. Electrochemical study presents supporting evidence that doping the stoichiometric LiSr_xMn_2-xO₄ phase with Sr is an effective way to improve the cycleability of LiSr_xMn_2-xO₄ spinel material. A remarkable enhancement of the cycleability with retention of the initial …

Polishing Rate And Dependent Factors Of Copper In Nh3 ·H2O Aqueous Solution Containing K3Fe(Cn)6 During Cmp, Han-Wei He, Yue-Hua Hu, Ke-Long Huang

Journal of Electrochemistry

Dependence of polishing rates of copper on concentrations of NH₃·H₂O, passivator K₃[Fe(CN)₆], γ-Al₂O₃ abrasives and polishing pressures, polishing rotative rates were studied. Dependent mechanisms were explained. It was shown a linear relation between polishing and polishing pressures and rotative rates within some range, non-linear relation between polishing and various reagent concentrations. Preston coefficient was varied. CMP recipe of the best polishing rate was gained: 4%K₃Fe(CN)₆+1%NH₃·H₂O+25%γ-Al₂O₃, K_p=0.02383. Technics conditions were 300 rpm and 80 kpa. The …

Electrosynthesis Of Glyoxylic Acid In A Cooled Cathode Reactor, Jin-Hong Fan, Jun Li, Xue-Yun Chen, Wei Li, Hao-Qi Gao

Journal of Electrochemistry

Glyoxylic acid was produced by electroreduction of oxalic acid in a well designed cooled cathode reactor. The cathodic and anodic electrolytes were super-saturated oxalic acid and hydrochloric acid aqueous solutions separated by a super-acid ion-exchange membrane. The current efficiency and time-space yield of glyoxylic acid were studied under different temperatures of cathode and electrolyte, current densities, materials of cathode. With the cooled cathode reactor, the energy consumption was reduced and higher oxalic acid concentration was available in solution, so that current efficiency was improved. The results indicated that the average time-space yield of glyoxylic acid was about 0.032 kg·dm^{-3 …}

Electrocatalytic Oxidation Of Formaldehyde On The Proline Film Modified Electrode, Yu-Rong Ma, Qiu-Xia Yang, Guo-Bao Li, Zheng-Kai Xi, Xue-Lin Wang

Journal of Electrochemistry

The proline film modified electrode and its electrochemical behavior was studied by cyclic voltammetry and spectroelectrochemistry. After incorporation of Ni(Ⅱ), the cyclic voltammograms of the proline Ni(Ⅱ) film electrode exhibited a typical redox peak, which appeared at potential of 0.52 V anodic and 0.44 V cathodic in NaOH. The formal potentials E' were linearly dependent on the pH, and the peak currents ip were linearly dependent on the square root of the scan rates, thus charge transfer in the film was controlled by diffusion. The diffusion coefficient is figured out to be 2×10^_-10 cm²·s^-1. The …

Preparation,Structure And Properties Of Electrochromic Rhodium Oxide Films, Hai-Hong Wang, Tao Wang, Man-Ming Yan, Zhi-Yu Jiang

Journal of Electrochemistry

Electrochromic rhodium oxide films were prepared on ITO substrate by sol-gel method. The films exhibited reversible two-color (bright yellow at reduction and dark green at oxidation) electrochromic behavior in alkaline solution with good cycle stability. In-situ XRD, TGA-DTA, IR, XPS methods were used for studying the structure and chemical process of the films. The diffusion coefficient during the electrochromic process was measured by electrochemical impedance spectra method. It was found that the rhodium oxide films may be suitable for the use in electrochromic devices.

Special Article: Outline On Status Of Post-9/11 Aviation Security Initiatives, Part I, Ibpp Editor

International Bulletin of Political Psychology

This article provides a commentary in an outline format on post-9/11 aviation security initiatives within the United States (US).

Bs News

Building Services Engineering

No abstract provided.

Integrating Passenger And Modulo As Learning Tools For Collaborative Engineering Education, Kalamullah Ramli, Frank Schwarz, Stefan Werner, A Halim Shamsuddin, Axel Hunger

Makara Journal of Technology

The University of Indonesia (UI), Gerhard Mercator University (GMU), the Universiti Kebangsaan Malaysia (UKM) have agreed to cooperate as partners to develop a joint bachelor (3+1) and masters (1+1) degree, and collaborate in the research fi elds of multimedia- and internet-based learning and application level active networks. This paper describes the introduction of the Offshore Project and the extending of information technology applications to the partner institutions in this international cooperation which would very much enhance the operations of the new initiative in engineering education, which could provide students in far distance with more fl exible learning environment.

Scitech News Volume 70, No. 3 (2016)

Sci-Tech News

Table of Contents:

Columns and Reports

From the Editor 3

Division News

Science-Technology Division 4

Chemistry Division 6

Conference Reflections (SPARKS Award Recipient) 12

Engineering Division 14

Engineering Division Awards Report 23

Aerospace Section of the Engineering Division 25

Reviews

Sci-Tech Book News Reviews 26

Adverstisements

IEEE 24

WeBuyBooks.net 28

Bs News

Building Services Engineering

No abstract provided.

Study Effect Of Salt Washing Process On Content And Iodium Stability Of Salt, Nelson Saksono

Makara Journal of Technology

Effect of Salt Washing Process on Content and Iodium Stability of Salt. Salt washing process should increase the salt quality. It should clean the salt from sludge or clay and also reduce the impurity compound such as Mg, Ca and the reductor content. The objective of these reseach is to assess the effect of washing process on the content og hygroscopic impurities compound (Ca and Mg), and reductor content of salt. The research also investigate the water absorbing, pH, KIO3 content as function of time to obtain effect of washing process on KIO3 stability in salt. The experiment result shows …

Object Classfification In Computer Vision With Discriminant Analysis, Amir Hamzahan

Makara Journal of Technology

A robotic sensor system is always supported by a computer system called ‘computer vision’. The important concept of computer vision is object classfifi cation. In this study two algorithms for object classifi cation in this system will be compared. Firstly, A simple method that do not need complex computation and that considered as an informal method is called binary tree decision structure. This method is based on modest caracteristic decriptors of an object such as vertical line, horizontal line or ellipse line. Unfortunately this method has weakness in recognize an image that contaminated by a noise. Secondly, a more formal …

Making Alloys (Ti1 - Xalx) N Using Plasma Cvd Technique From Alcl3 Powder, H2 And N2 Gas ,With Solvent Ticl4, Keba Moto

Makara Journal of Technology

The substitution of Ti atoms by Al atoms in TiN lattice sites to form (Ti1-xAlx)N is clearly demonstrated by the coatings which were deposited on steel substrate and using plasma CVD technique. The presence of Al atoms in TiN lattice site is shown by means of XRD and EDX techniques: lattice parameters decreasing of TiN as the fraction of Al increases (XRD) and precipitation of hexagonal AlN phase (XRD) as the fraction of Al exceeding 0.8 (EDX). The hardness of these coating are just around 30 GPa, which is beyond the values reported in literatures.

Effects Of 0.25 % Mo (Molybdenum) Which Is Contained In The Ductile Cast Iron On Mechanical Properties Of Austempered Ductile Iron (Adi)., Nukman Nukman, Bustanul Arifin, Bambang Sugiarto

Makara Journal of Technology

The aim of this research is to investigate the effects of 0.25 % Mo (Molybdenum) which is contained in the ductile cast iron on mechanical properties of Austempered Ductile Iron (ADI). The various temperatures and the holding times are used in the heat treatment processes. Using a given 0.25 % Mo in the ductile iron, ADI's alloyed developes a higher ultimate tensile stress value and decreases the elongation if we compare with the as cast (non alloy ductile iron). The higher impact energy value obtained at 9000 C austenization and 375o C austempering temperatures during 60 minutes holding times. The …

The Manufacturing Properties Of Galvanised Steel Sheet With Hexagonal And Tetragonal Network Of Circle Holes, Rahmat Saptono

Makara Journal of Technology

Galvanized steel sheet of 0.8 mm in thickness was drilled with circle holes of 2.5 mm diameter and spacing arranged in tetragonal and hexagonal pattern. The manufacturing properties of specimen were studied through drawing and stretching simulative test. It was concluded from the results that, at high ratio of punch to hole diameter (40/2.5), the drawing properties (LDR) of both square and hexagonal perforated sheet were slightly lower than that of solid sheet, while hexagonal perforated showing LDR somewhat higher than the square one. The stretching properties (LDH) of sheet, however, were much lower than that of solid sheet while …

Develops The Software Of Dsp Processor For The Cdma Circuitry, Arman Djohan D.

Makara Journal of Technology

This research develops the software of DSP Processor type TMS320C54X for the CDMA circuitry. This research apply two algorithms namely Mathematic Algorithm and table lookup Algorithm. From both algorithms, the research examine what algorithm have the fasted processing time and the smallest memory occupation. From the examination results the Mathematic Algorithm have 20.62 milliseconds processing time and the Table lookup algorithm have 14.08 milliseconds processing time. The Table lookup algorithm have the fastest processing time because the Matematic algorithm need the rounding process of the fi gure. Eventhough such processing time is not exceed from the 125 millisecond of delay …

Trends. Nuclear Power Plants And Homeland Security And Defense: The Views Of Representative Markey, Ibpp Editor

International Bulletin of Political Psychology

The author discusses US Representative Edward J. Markey, and his public discourse about the "safety and security of the nuclear power industry.

Biometrics And The Bottom Line For Aviation Security, Ibpp Editor

International Bulletin of Political Psychology

This article attempts to identify the utility of biometric technology for variants of aviation security.

How Should Governments Address High Levels Of Natural Radiation And Radon--Lessons From The Chernobyl Nuclear Accident And Ramsar, Iran, S. M. Javad Mortazavi, M. Ghiassi-Nejad, Azam Niroomand-Rad, P. Andrew Karam, John R. Cameron

RISK: Health, Safety & Environment (1990-2002)

The authors discuss the high levels of natural background radiation in Ramsar, Iran, and offer data indicating that this has had little effect on the health of Ramsar's inhabitants. The authors then examine the implications their research could have for public health policy.

Review Of: Eat Your Genes: How Genetically Modified Food Is Entering Our Diet (Stephen Nottingham Ed.), Natalie Duval

RISK: Health, Safety & Environment (1990-2002)

Review of the book: "Eat Your Genes: How Genetically Modified Food Is Entering Our Diet," by Stephen Nottingham, (St. Martin's Press 1999). Introduction, Glossary, Bibliography, Index. ISBN 1-85649-578-7 [212 pp. $17.95. Softbound, St. Martin's Press, Inc., New York, NY 10010].

Bs News

Building Services Engineering

No abstract provided.

Photocurrent Enhancement By Ticl4 Post-Treatment For Tio2 Nanoporous Film Electrode, Yan-Jie Ren, Li Zhang, Sheng-Min Cai

Journal of Electrochemistry

Enhanced photocurrent in dye-sensitized photoelectrochemical cell was obtained by post-treating the TiO₂ nanoporous film electrode with TiCl₄. By investigating the effect of the post-treatment on surface area, pore size distribution, laser pulse induced current transient of the film electrode, photocurrent increase by the post-treatment was assigned to the improved electron percolation resulting from broadening of interparticle neck.

Effect Of The Brightener On The Behavior Of The Silver Electrodeposition, Jin Hu, Hui-Min Wu, Xiang-Ming Feng, Wei-Dong Li, Zheng-Zhong Zuo, Yun-Hong Zhou

Journal of Electrochemistry

The effect of the brightener on the behavior of the silver electrodeposition in cyanide solution was studied by potentiostatically step and rotating dise electrode (RDE) as well as X-ray diffraction (XRD) and scanning electron microscope (SEM). It was found that the silver electrodeposition was not changed by the addition of the brightener to the fundarmental solution. But it apparently increased the solution's micro-leveling effection and remarkably improved the coating's surface lightness. The coating's orientation isn't changed by the addition of the brightener in the light of the XRD result. The effectivness of the brightener was also discussed by the half-wideth …

Determination Of Copper In The Waste Water Of Plating By Chronocoulometry For Flowing Solution, Xin-Hua Lin, Wei Chen

Journal of Electrochemistry

The chronocoulometry for flowing solution was devoloped and applied to the detemination of copper(Ⅱ) in the waste water of plating. The linear range of copper(Ⅱ) was 2～16mg/L, and the relative standard deviation was less than 0.1% (n =8). The recovery was 98%～103% for copper(Ⅱ) in the waste water.Chronocoulometry for flowing solution overcomed noise disturbance resulting from capacity current and variety of property of electrode surface. This method was sensitive,accurate and well reproducible.

Raman Spectroscopic Study On Mechanism Of Aluminum Triphosphate Pigment, Zhi-Jun Gu, Yong-Gui Liao, Zhi-Gang Zhang, Qi-Long Guo, Fang-Teng Su

Journal of Electrochemistry

The painted steel sample whose coating contained anticorrosive pigment has been investigated by Raman spectroscopy. The protective mechanism of aluminum triphosphate pigment for A3 steel is proposed as follows: Aluminum triphosphate can be dissolved and arrive at the surface of the steel.The dissolved triphosphate ions can complex with ferric ions.And the new products, namely ferric triphosphate, can strongly adhere at the surface of the steel by chemical bonds slowly. At last, a compact protective film, which effectively separates the steel substrate from the aggressive media, is formed at the steel surface.