Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Journal

Discipline
Institution
Keyword
Publication Year
Publication
File Type

Articles 23881 - 23910 of 27383

Full-Text Articles in Engineering

Study On Electrocatalytic Oxidation Of Salbutamol At Carbon Nanotubes Modified Electrode, Ying-Liang Wei, Lu-Ping Zhang, Chen Shao, Hui Feng, Xian-Li Li Aug 2008

Study On Electrocatalytic Oxidation Of Salbutamol At Carbon Nanotubes Modified Electrode, Ying-Liang Wei, Lu-Ping Zhang, Chen Shao, Hui Feng, Xian-Li Li

Journal of Electrochemistry

The multi-wall carbon nanotubes(MWNT) were dispersed successfully into water in the presence of dihexadecyl hydrogen phosphate(DHP) and a stable well-distributed suspension.A was formed sensor based on the multi-carbon nanotubes film coated glassy carbon electrode was developed.The electrochemical response of salbutamol was studied by square wave voltammetry.The oxidation peak potential of salbutamol at the modified electrode was observed at 0.604 V,which shifted about 40 mV negatively.The peak current increased 4.5 folds,in contrast to that at a bare electrode.Under optimal measurement conditions,there was a good linear relationship between the peak current(Ipa) and salbutamol concentration(C) in the range from 8.3 × 1 0 …

Go to article

Formation Of Copper Microcrystals On Porous Silicon Films, Lan-Li Chen, Fu-Fang Zhou, Bao-Gai Zhai, Yuan-Ming Huang Aug 2008

Formation Of Copper Microcrystals On Porous Silicon Films, Lan-Li Chen, Fu-Fang Zhou, Bao-Gai Zhai, Yuan-Ming Huang

Journal of Electrochemistry

Microcrystals of metallic copper were electrochemically deposited onto the surface of porous silicon films in the aqueous electrolyte of copper(II) chloride.The microstructures of electrochemically deposited copper microcrystals on the porous silicon films were characterized by using scanning electron microscopy.The results have demonstrated that both center-hollowed and center-solid equilateral triangles in the sizes of several micrometers can be formed on the smooth bed of copper microcrystals.As the deposition duration increased from 0 to 28 hours,the fractal dimensions of the porous silicon was decreased from 2.608 to 2.252,suggesting that the electrochemical deposition can smooth the rough surface of porous silicon films.Compared to …

Go to article

A Study Of Pd-Ir On Nickel Foam Cathode For Aluminum-Hydrogen Peroxide Semi-Fuel Cells, Ding-Wang Zhu, Dan-Dan Chen, Bi-Jin Li, Gui-Ling Wang, Dian-Xue Cao Aug 2008

A Study Of Pd-Ir On Nickel Foam Cathode For Aluminum-Hydrogen Peroxide Semi-Fuel Cells, Ding-Wang Zhu, Dan-Dan Chen, Bi-Jin Li, Gui-Ling Wang, Dian-Xue Cao

Journal of Electrochemistry

The Pd-Ir/Ni electrodes were prepared by electrodeposition of Pd and Ir on the porous nickel foam surface.The structure,composition and state of the Pd-Ir catalyst were analyzed using SEM and XPS.The catalytic performance of Pd-Ir/Ni for H2O2 electroveduction at different concentrations of H2O2 were investigated.A limiting current density of 318 mA/cm2 was obtained with 0.4 mol/L H2O2.The aluminum-hydrogen peroxide semi-fuel cells using different aluminum alloys as anode and Pd-Ir/Ni as cathode were assembled and tested.It was found that the fuel cell with aluminum-manganese alloy anode demonstrated a maximum power density …

Go to article

Electrocatalytic Oxidation Of Salicylic Acid At Novel Gold Nanoparticle-Modified Glassy Carbon Electrode, Yan-Ping Cui, Chang-Zhu Yang, Jian Huang, Wen-Hong Pu, Jing-Dong Zhang Aug 2008

Electrocatalytic Oxidation Of Salicylic Acid At Novel Gold Nanoparticle-Modified Glassy Carbon Electrode, Yan-Ping Cui, Chang-Zhu Yang, Jian Huang, Wen-Hong Pu, Jing-Dong Zhang

Journal of Electrochemistry

A gold nano-particles modified glassy carbon electrode(GNP/GCE) was prepared by the"seed-mediated gold nano-particles growth method".Field emission scanning electron microscopy,ultraviolet-visible(UV-vis) spectroscopy analysis and electroalaylsis were employed to study the morphology and electrochemical performances.The resulting electrode showed excellent electro-catalytic activity toward the oxidation of salicylic acid and the response sensitivity was 1.8 fold than that obtained on GCE.Good linear relationship was obtained between response current and salicylic acid concentration in the range of 5.0 × 10-7 ~8.0 × 10-5 mol/L,which could be used in the detection of trace salicylic acid.

Go to article

Direct Electrochemistry Of Hemoglobin Immobilized On The Electrode Modified With Ionic Liquid And Kgm, Liu Yang, Xia-Qin Wu, Wen-Jing Hou, Lin-Fei Gu, Rong Wang, Xiao-Ming Guo, Zong-Rang Zhang Aug 2008

Direct Electrochemistry Of Hemoglobin Immobilized On The Electrode Modified With Ionic Liquid And Kgm, Liu Yang, Xia-Qin Wu, Wen-Jing Hou, Lin-Fei Gu, Rong Wang, Xiao-Ming Guo, Zong-Rang Zhang

Journal of Electrochemistry

Hemoglobin(Hb) has been immobilized on a glassy carbon electrode(GCE) surface with konjac glucomannan(KGM) and room temperature ionic liquid(RTIL).And which electrochemical behaviors have been investigated by cyclic voltammetry.The results shown that the entrapped Hemoglobin undergoes fast direct electron transfer reactions with formal potential of-0.38V(vs.SCE) and the E0' is linearly dependent on solution pH with a slope value of 51 mV/pH,due to the electron transfer of HbFe3+/HbFe2+ redox couple companied with a proton transfer.The electrocatalytic reduction of oxygen was also explored at the Hb-KGM/RTIL/Nafion/ GC electrode.

Go to article

Performance Of Magnetic Field Coupled With Electrochemical Process For Preparing Polyaluminum Chloride, Ke-Wu Pi, Wen-Qi Gong, Zheng-Qing Huang Aug 2008

Performance Of Magnetic Field Coupled With Electrochemical Process For Preparing Polyaluminum Chloride, Ke-Wu Pi, Wen-Qi Gong, Zheng-Qing Huang

Journal of Electrochemistry

Polyaluminum chloride(PAC) was prepared by electrochemical process coupled with magnetic field paralleling to the gravitation direction.The electrolyte of 0.1 M AlCl3 solution was used,with the iron plates as cathode and aluminum sheets as anode.PAC of 0.6 M total aluminum(AlT),83.2% Alb to AlT and basicity(Ba)=2.4 was synthesized when magnetic flux density was 0.4T,the distance of electrodes was 15 mm,the voltage of electrolysis cell was 2.4 V and current density was 300 A/m2.Under above experimental conditions,the voltage efficiency,energy efficiency and electrodes surface area to reduction cells of electrochemical reactor were 85.2%,81.5% and 140.1m2/m3,respectively.The polarization curves determined by constant-current method showed that the …

Go to article

Study Of Triethyl Phosphate Self-Assembled Films On Iron For Corrosion Inhibition, Wen-Juan Guo, Shen-Hao Chen, Wei He, Xue-Hui Pang, Yuan-Yuan Feng Aug 2008

Study Of Triethyl Phosphate Self-Assembled Films On Iron For Corrosion Inhibition, Wen-Juan Guo, Shen-Hao Chen, Wei He, Xue-Hui Pang, Yuan-Yuan Feng

Journal of Electrochemistry

The self-assembled film of triethyl phosphate(TEP) formed on the iron surface was found to protect iron from corrosion in 0.5 mol·L-1 H2SO4 efficiently. The inhibition effects were investigated using the electrochemical impedance spectroscopy(EIS).EIS demonstrated that the charge-transfer resistance of the electrode covered with TEP film was greater than that of the naked iron electrodes and the inhibition efficiency of TEP film increased quickly in the initial period and then increased slowly. Quantum chemical calculations provide information about the process of adsorption of molecules on the metal surface at the molecular level.

Go to article

50th Rocky Mountain Conference On Analytical Chemistry Jul 2008

50th Rocky Mountain Conference On Analytical Chemistry

Rocky Mountain Conference on Magnetic Resonance

Final program, abstracts, and information about the 50th annual meeting of the Rocky Mountain Conference on Analytical Chemistry, co-endorsed by the Colorado Section of the American Chemical Society and the Rocky Mountain Section of the Society for Applied Spectroscopy. Held in Breckenridge, Colorado, July 27-31, 2008.

Go to article

Diffusion Bonding Of Stainless Astm A240 Grade 304 In Double Side Flux Cored Arc Welding, S Pitaknorachon, B Poopat Jul 2008

Diffusion Bonding Of Stainless Astm A240 Grade 304 In Double Side Flux Cored Arc Welding, S Pitaknorachon, B Poopat

Journal of Metals, Materials and Minerals

Double side flux cored arc welding (DS-FCAW) has been developed from conventional flux cored arc welding (FCAW). DS-FCAW, dual torches are used by placing an opposite to each other and welding on both sides simultaneously. The objective of this research paper is to investigate diffusion bonding effect due to DS-FCAW. Stainless steel ASTM A240 Grade 304 was studied. Other welding parameters were set constant except welding current and voltage. Diffusion bonding was observed even though weld profiles from macro inspection showed lack of penetration by weld metal in all experiments. It can be concluded that, at certain conditions, the welds …

Go to article

Improvement Of Mechanical Properties For En Aw 6082 Aluminium Alloy Using Equal-Channel Angular Pressing (Ecap) And Post-Ecap Aging, M Fujda, T Kvačkaj, K Nagyová Jul 2008

Improvement Of Mechanical Properties For En Aw 6082 Aluminium Alloy Using Equal-Channel Angular Pressing (Ecap) And Post-Ecap Aging, M Fujda, T Kvačkaj, K Nagyová

Journal of Metals, Materials and Minerals

The mechanical properties and microstructure of EN AW 6082 aluminium alloy subjected to severe plastic deformation and aging treatment were compared with those of the extruded and artificially aged state (initial state). The initial state of alloy subjected to solution annealing and quenching was severely deformed at ambient temperature by equal channel angular pressing (ECAP) following route C up to three passes. Polyedric microstructure of initial state was considerably changed by the repetitive ECA-pressing. Deformation bands with different density of slip lines were observed in microstructure of ECAPed and aged states, which indicated non-uniform deformation across the cross-section of ECAPed …

Go to article

Surface Modification Of Bricks By Chitosan Coatings, S Nilpairach, S T. Dubas Jul 2008

Surface Modification Of Bricks By Chitosan Coatings, S Nilpairach, S T. Dubas

Journal of Metals, Materials and Minerals

Bricks were successfully modified by application of a chitosan coating in order to provide their surface with a water repellant character. The chitosan coating was prepared by depositing solutions of variable chitosan concentration (1% or 2.5% w/w) onto the brick surface and let to dry under ambient condition. In order to improve the water repellant property, the films were cross-linked with a 1% solution of sodium citrate, sodium sulfate or sodium tri - polyphosphate. The effect of the chitosan concentration on the morphology of the coating at the brick surface was observed by scanning electron microscope (SEM). It was found …

Go to article

Current Status Of Nanotechnology Consumer Products And Nano-Safety Issues, N Chuankrerkkul, S Sangsuk Jul 2008

Current Status Of Nanotechnology Consumer Products And Nano-Safety Issues, N Chuankrerkkul, S Sangsuk

Journal of Metals, Materials and Minerals

This paper is divided into 2 parts to present a review on nanotechnology consumer products ('Nanotech' products) and a current status on 'Nano-Safety' issue. The first part focuses on up-to-date information of 'Nanotech' products that were already on the market as reported by Project on Emerging Nanotechnologies of the Woodrow Wilson International Center for Scholars. There are more than 500 products for a variety of applications, among which health and fitness products are the largest category. The products in this group consist of clothing, cosmetics and sunscreens. Silver is the most commonly used material, followed by carbon in the forms …

Go to article

Effect Of Limestone Dust On The Properties Of Thai Pottery Sintering At Low Temperature, S Sangsuk, S Khunthon, S Saenapitak, S Nilpairach Jul 2008

Effect Of Limestone Dust On The Properties Of Thai Pottery Sintering At Low Temperature, S Sangsuk, S Khunthon, S Saenapitak, S Nilpairach

Journal of Metals, Materials and Minerals

Limestone dust from a limestone crushing plant was used as an additive in pottery clay for this experiment. After the limestone dust was sieved through a 35 mesh stainless steel sieve, it was mixed with Angthong pottery clay at various contents. Samples with and without limestone dust were sintered at 600, 700, 900, and 1000o C. Because of limestone blowing for samples with limestone dust sintered at 900 and 1000o C, physical property measurement was performed only for samples sintered at 600 and 700o C. While sintering at low temperatures (600 and 700o C), physical properties of samples with limestone …

Go to article

Morphology Controlled Calcium Ortho Phosphates Induced By Chemical Additions Under Hydrothermal Reaction, D P. Kashima, E Kongkul, T Daopradubwon Jul 2008

Morphology Controlled Calcium Ortho Phosphates Induced By Chemical Additions Under Hydrothermal Reaction, D P. Kashima, E Kongkul, T Daopradubwon

Journal of Metals, Materials and Minerals

Morphology controlled calcium orthophosphates under hydrothermal reaction was achieved using saturated solution of monocalcium phosphate monohydrate (MCPM) as a starting material. MCPM saturated solution was hydrothermally treated at 180°C for 4 and 12 hrs. Citric acid as a chelating agent and a mixed solution of NaNO3 and NaF were individually added into the reactor. The morphologies, phases and microstructures of the obtained products were characterized by optical microscope (OM), X-ray diffraction (XRD) and scanning electron microscope (SEM), respectively. Irregular shape crystals were obtained when a saturated solution of MCPM was autoclaved at 180°C for 4 hrs. Though citric acid was …

Go to article

Calcium Phosphate Film Coating On Titanium Substrate By Electrochemical Deposition, D P. Kashima, A Rakngarm Jul 2008

Calcium Phosphate Film Coating On Titanium Substrate By Electrochemical Deposition, D P. Kashima, A Rakngarm

Journal of Metals, Materials and Minerals

Calcium phosphate film on titanium substrate was achieved by electrochemical method in four different kinds of electrolyte. The pure titanium metal (99.99%) with 0.8 cm in width and 2 cm in length was used as a substrate and it was subsequently etched by 2M HF for 1 minute before electrochemical deposition. Calcium phosphate film could form at a different current density for each kind of electrolyte as follows: 10 mA/cm2 for MCPM based aqueous solution, 20 mA/cm2 for MCPM based aqueous solution with ions addition, 10 mA/cm2 and 20 mA/cm2 for MCPM based 20%V/V ethanol and 50%V/V ethanol solution, respectively. …

Go to article

Improved L-929 Cell Growth From Self Assembled Pdadmac/Gelatin Thin Films, P Kittitheeranun, P Potiyaraj, T Bunaprasert, N Sanchavanakit, S T. Dubas Jul 2008

Improved L-929 Cell Growth From Self Assembled Pdadmac/Gelatin Thin Films, P Kittitheeranun, P Potiyaraj, T Bunaprasert, N Sanchavanakit, S T. Dubas

Journal of Metals, Materials and Minerals

This article demonstrates the advantages of using PDADMAC/gelatin over chitosan/gelatin multilayer thin films to improve L-929 mouse fibroblast growth. Although chitosan-based materials are often preferred in cell culture, we put in evidence the problematic low stability and decomposition of chitosan based film under physiological pH. Two kinds of coating were assembled using either chitosan or Poly(diallyldimethylammonium chloride) (PDADMAC) as polycationic polyelectrolyte and gelatin as the anionic counterpart. The non-toxic nature of each coating was confirmed by MTT assay for cell viability and cell proliferation. Using optical microscopy, it was observed that the L-929 fibroblast spread preferentially on the PDADMAC/gelatin surface …

Go to article

Effects Of Tin Powder On Properties Of Sintered Stainless Steels, N Tosangthum, P Muangtong, O Coovattanachai, M Morakotjinda, T Yodkaew, P Wila, R Krataitong, B Vetayanugul, R Tongsri Jul 2008

Effects Of Tin Powder On Properties Of Sintered Stainless Steels, N Tosangthum, P Muangtong, O Coovattanachai, M Morakotjinda, T Yodkaew, P Wila, R Krataitong, B Vetayanugul, R Tongsri

Journal of Metals, Materials and Minerals

It was found that addition of 4 wt.% of gas-atomized tin (Sn) powder to stainless steel powders could alter sintered properties of P/M stainless steels. For stainless steel series 300 powders, Sn powder addition resulted in improved tensile properties and hardness. It was speculated that the liquid Sn, formed during sintering process, acted as either a sintering activator or a solvent for nickel (Ni) dissolution. Sintering activation existed because the liquid Sn acted as a diffusion path for powder particle constituent atoms. Dissolution of Ni in Sn was simply due to diffusion of Ni atoms from stainless steel series 300 …

Go to article

Sintered Properties Of 409l Powder Compacts Influenced By Metal Powder Additives, O Coovattanachai, T Yodkaew, M Morakotjinda, N Tosangthum, R Krataitong, A Daraphan, B Vetayanugul, R Tongsri Jul 2008

Sintered Properties Of 409l Powder Compacts Influenced By Metal Powder Additives, O Coovattanachai, T Yodkaew, M Morakotjinda, N Tosangthum, R Krataitong, A Daraphan, B Vetayanugul, R Tongsri

Journal of Metals, Materials and Minerals

Sintering of powder compacts, prepared by admixing of 409L powder with 2-6 wt.% of copper and nickel powders was investigated. It was observed that the strength of the 409L-Cu specimens increased with increasing Cu content. In contrast, sintered density and elongation decreased with increasing Cu content due to swelling effect. When 2 wt.% of Ni powders were added, sintered density and strengths were maximized. When Ni contents higher than 2 wt.% , the decrease of sintered density and strengths were attributed to the number of pores left by the original sites of Ni powder particles.

Go to article

Sintered Fe-Al2o3and Fe-Sic Composites, T Yodkaew, M Morakotjinda, N Tosangthum, O Coovattanachai, R Krataitong, P Siriphol, B Vetayanugul, S Chakthin, N Poolthong, R Tongsri Jul 2008

Sintered Fe-Al2o3and Fe-Sic Composites, T Yodkaew, M Morakotjinda, N Tosangthum, O Coovattanachai, R Krataitong, P Siriphol, B Vetayanugul, S Chakthin, N Poolthong, R Tongsri

Journal of Metals, Materials and Minerals

The presence of non-reactive (Al2O3) and reactive (SiC) hard particles affected properties of sintered Fe-base composites. With the same compacting and sintering conditions, addition of Al2O3 particles caused reduction of sintered densities. Tensile strengths, elongation and hardness of the sintered Fe-Al2O3 materials decreased with increasing Al2O3 particle amounts. The presence of Al2O3 particles prohibited compacting and sintering processes of the Fe powder. In contrast, addition of SiC particles resulted in reaction between Fe and SiC particles. Sintered density of the sintered Fe-SiC composites was significantly lower than that of the sintered Fe-Al2O3 materials. However, tensile strengths and hardness, except elongation, …

Go to article

Sintered Materials Prepared From Stainless Steel Series 300 And 400 Powders, M Morakotjinda, N Kuljittipipat, N Poolthong, N Tosangthum, P Wila, R Krataitong, T Yodkaew, O Coovattanachai, B Vetayanugul, R Tongsri Jul 2008

Sintered Materials Prepared From Stainless Steel Series 300 And 400 Powders, M Morakotjinda, N Kuljittipipat, N Poolthong, N Tosangthum, P Wila, R Krataitong, T Yodkaew, O Coovattanachai, B Vetayanugul, R Tongsri

Journal of Metals, Materials and Minerals

Some sintered materials were prepared from mixtures of stainless steel series 300 and series 400 powders. The sintered stainless steels consisted of both austenitic and ferritic phases so they were designated as sintered duplex stainless steels (SDSSs). Microstructures and properties of the SDSSs were characterized and tested. Most SDSSs, except the 310L powder-base SDSSs, showed improved tensile strengths and hardness but exhibited inferior ductility, compared to those of the sintered stainless steels series 300. The 304L-410L SDSS showed promising mechanical properties. This SDSS were further investigated by varying weight ratio of 304L and 410L powders. It was found that sintered …

Go to article

Bs News Jul 2008

Bs News

Building Services Engineering

No abstract provided.

Go to article

Effects Of Yttria Concentration And Microstructure On Electric Breakdown Of Yttria Stabilized Zirconia, O Jongprateep, V Petrovsky, F Dogan Jul 2008

Effects Of Yttria Concentration And Microstructure On Electric Breakdown Of Yttria Stabilized Zirconia, O Jongprateep, V Petrovsky, F Dogan

Journal of Metals, Materials and Minerals

Ceramic materials have great potentials for capacitor application. However, low breakdown strength of the materials remains a key challenge for development of high performance capacitors. In this study, yttria stabilized zirconia (YSZ) were fabricated and tested for breakdown strength. YSZ samples with 3, 8, and 10 mol% yttria were carefully processed to control grain size and porosity level. Experimental results revealed that breakdown strength as high as 2 MV/cm could be achieved. The breakdown strength was not significantly affected by porosity level, but it was by yttria concentration. Relationship among yttria concentration, residual porosity and breakdown strength is discussed in …

Go to article

Nano-Size Hydroxyapatite Powders Preparation By Wet-Chemical Precipitation Route, N Monmaturapoj Jul 2008

Nano-Size Hydroxyapatite Powders Preparation By Wet-Chemical Precipitation Route, N Monmaturapoj

Journal of Metals, Materials and Minerals

In this study, wet-chemical process was performed to prepare nano-size hydroxyapatite (HA) powders (≈10 nm) by varying concentration (low, medium and high) of the starting solutions in order to increase the amount of as-dried HA powders with different process conditions. Particle sizes and density were analyzed and differential thermal analysis was used to determine the glass transition (Tg) and the onset crystallization (Tc) temperatures. XRD and SEM were performed to identify phases and microstructure. The wet-chemical precipitation using low concentration of starting solution under reflux environment could be the optimize process to induce the formation of hydroxyapatite rather than tricalcium …

Go to article

The Limnogeology Of The Lakes Sagara And Nyamagoma, Hudson Nkotagu Jun 2008

The Limnogeology Of The Lakes Sagara And Nyamagoma, Hudson Nkotagu

Tanzania Journal of Engineering and Technology (TJET)

The present study focuses on the limnogeological aspects of the lakes Sagara and Nyamagoma within the Malagarasi Wetland Ecosystem. Abiotic parameters from water and sediment samples were determined during the dry and wet seasons using appropriate gears and methods. The data show variation of the abiotic parameters in both lakes from the water surface to the bottom. Lake Nyamagoma is less turbid (0.7-24 NTU) than Lake Sagara (25 to 65 NTU). The water transparency was also high at Lake Nyamagoma (0.75-1.5 m) thus supporting the observed turbidity trend. The physical chemical changes may be attributed to processes such as cooling, …

Go to article

Modeling Of A Spray Assisted Natural Draft Cooling Tower, Kaunde K Jun 2008

Modeling Of A Spray Assisted Natural Draft Cooling Tower, Kaunde K

Tanzania Journal of Engineering and Technology (TJET)

Cooling towers are one of the largest heat and mass transfer devices that are in common use. A novel type of cooling tower has been proposed in which air flow rate into the tower is drawn by ejector action of sprays instead of fans as is done in conventional mechanical forced or induced draft cooling towers. This novel design offers the potential of saving the energy cost for driving the fan. The paper presents mathematical models for momentum transfer which is the driving force causing the entrainment of air. Also the heat transfer model for co-current flow of liquid and …

Go to article

Application Of Non-Destructive Testing In Evaluating Reinforced Concrete Structural Elements In Buildings, I Rubaratuka Jun 2008

Application Of Non-Destructive Testing In Evaluating Reinforced Concrete Structural Elements In Buildings, I Rubaratuka

Tanzania Journal of Engineering and Technology (TJET)

Of recent a large number of existing reinforced concrete buildings have required reconstruction, renovation and improvement. This tendency poses a number of problems that have to be solved, the main one being to determine the actual strength condition of the structural components/elements of the building. It includes determination of the quality of materials used, specification of the types and description of apparent faults and damages and extent of wear of the building. To undertake this evaluation, non – destructive testing methods are used. In this paper, applications of non – destructive testing methods to determine the strength state of reinforced …

Go to article

Assessment Of Integrated Water Resources Management Practice In Yatta Canal, Machakos District, Kenya, Lawrence Simitu Jun 2008

Assessment Of Integrated Water Resources Management Practice In Yatta Canal, Machakos District, Kenya, Lawrence Simitu

Tanzania Journal of Engineering and Technology (TJET)

Yatta Canal is situated in Yatta division, Machakos district about 100 km from Nairobi along Thika- Garissa road. It is about 60 Km long and supplies water for domestic, livestock and irrigation use. Over the years, the water supply has been unreliable especially during dry season leading to conflicts between upstream and downstream consumers. Sometimes the Government has been forced to intervene to restore order. The study aimed at assessing the use of Yatta canal, based on the principles of Integrated Water Resources Management (IWRM) which stipulates efficient use of water and involvement of all stakeholders in decision making for …

Go to article

Sediment Yield Prediction In Tanzania: Case Study Of Dodoma District Catchments, Mathew Mulemgera Jun 2008

Sediment Yield Prediction In Tanzania: Case Study Of Dodoma District Catchments, Mathew Mulemgera

Tanzania Journal of Engineering and Technology (TJET)

Soil erosion and sedimentation is serious and is resulting in rapid sedimentation of streams and reservoirs in Tanzania. This makes sediment yield modeling important before undertaking water resources development projects, although it has so far not been done in the country. At present sediment yield prediction can be done using physically based models, empirical soil erosion and sediment yield models, and sediment rating curves. The physically based models contain numerous parameters that are difficult to measure or estimate, making them inappropriate in developing countries like Tanzania. The rating curves give rough estimates while the empirical sediment yield models need runoff …

Go to article

Quality Control In The Construction Of Reinforced Concrete Buildings In Dar Es Salaam, I Rubaratuka Jun 2008

Quality Control In The Construction Of Reinforced Concrete Buildings In Dar Es Salaam, I Rubaratuka

Tanzania Journal of Engineering and Technology (TJET)

Quality Control in the construction industry is very important to ensure that what is being done conforms to the applicable standards or good practice and the contract documents. In this article, results of investigations conducted at different construction sites for reinforced concrete buildings in Dar es Salaam to check if quality control measures are being implemented are discussed. It has been established that generally quality control is not properly carried out. Finally, measures to enhance quality control on sites are outlined.

Go to article

Accuracy Analysis For Kolmogorov Entropy Used In Studying The Chaotic Dynamics Of Cfb Reactors Based On Solids Concentration Fluctuations, Samwel V. Manyele Jun 2008

Accuracy Analysis For Kolmogorov Entropy Used In Studying The Chaotic Dynamics Of Cfb Reactors Based On Solids Concentration Fluctuations, Samwel V. Manyele

Tanzania Journal of Engineering and Technology (TJET)

A study on the chaotic dynamics of a high flux circulating fluidized bed (CFB) riser (10-m high and 76-mm i.d.) using the maximum likelihood estimate of the Kolmogorov entropy (KML) is reported. The signals used were measured by using a solids concentration fiber optic probe, accuracy of which is reported based on statistical analysis. The sensitivity analysis of the parameters used for computing KML was conducted to identify optimum settings, based on the standard error, s(KML) and the nature of PDF of the b-values from the reconstructed phase space trajectories. The length of time series, N, sampling frequency, fs, and …

Go to article

First Prev Next Last