Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Journal

Discipline
Institution
Keyword
Publication Year
Publication
File Type

Articles 23311 - 23340 of 27385

Full-Text Articles in Engineering

Novel Algorithms For Tracking Multiple Targets, Sheng-Yun Hou, Hsien-Sen Hung, Shun-Hsyung Chang, Jeng-Cheng Liu Apr 2010

Novel Algorithms For Tracking Multiple Targets, Sheng-Yun Hou, Hsien-Sen Hung, Shun-Hsyung Chang, Jeng-Cheng Liu

Journal of Marine Science and Technology–Taiwan

In this paper, two novel angle tracking algorithms are proposed for tracking multiple targets using an array of sensors with known locations. First, we present an extended Kalman particle filter (EKPF) which is capable of determining the direction-of-arrival (DOA) angles using a single snapshot of data during the interval between each time step. The proposed EKPF algorithm combines particle filtering with the extended Kalman filter (EKF) in order to prevent sample impoverishment during its resampling process. Next, we present a robust Kalman filter (RKF) tracking algorithm intended to improve tracking success rates of other existing algorithms for the case of …


Strain Analysis Of Vapor Chamber Heat Spreaders, Yu-Hsun Hung, Shung-Wen Kang, Wan-Chun Tsai Apr 2010

Strain Analysis Of Vapor Chamber Heat Spreaders, Yu-Hsun Hung, Shung-Wen Kang, Wan-Chun Tsai

Journal of Marine Science and Technology–Taiwan

Vapor chamber is a cooling device with phase change phenomena. It not only provides high heat transfer coefficient but also removes hot spot. During working of vapor chamber, the buckle force and vapor pressure could lead to deformation. It is a popular way that pillars are set up to reduce deformation. This paper presents a three-dimensional finite element analysis for the vapor chamber by ANSYS software program. Four pillars with two kinds of designs are built into vapor core in order to avoid deformation of the vapor chamber. The results appear that pillars inside vapor chamber are good to reduce …


Simultaneous Measurement Of Deformation And Temperature Of High-Strength Concrete At Very Early Age To Determine The Initial And The Finial Setting Time, Shu-Ken Lin, Chung-Ho Huang, Chao-Shun Chang, Tsong Yen, Chung-Hao Wu, Yiching Lin Apr 2010

Simultaneous Measurement Of Deformation And Temperature Of High-Strength Concrete At Very Early Age To Determine The Initial And The Finial Setting Time, Shu-Ken Lin, Chung-Ho Huang, Chao-Shun Chang, Tsong Yen, Chung-Hao Wu, Yiching Lin

Journal of Marine Science and Technology–Taiwan

The interior shrinkage deformation and temperature change of high-strength concrete (HSC) at very early age, i.e., the first 24 h from casting, and up to an age of 72 h was investigated experimentally using optic fibre sensors (SOFO) and thermally sensitive resistors. The initial and the final setting times of HSC were also investigated. Results show that two turning points (I and II) on the development curve of deformation, both represent the onsets of the variation of rigidity in fresh HSC, can be recognized as the initial and the final setting times, which are evaluated around 4.5 h to 5.7 …


Global Exponential Stability Criteria For Switched Neutral Systems With Interval Time-Varying Delay, Ker-Wei Yu Apr 2010

Global Exponential Stability Criteria For Switched Neutral Systems With Interval Time-Varying Delay, Ker-Wei Yu

Journal of Marine Science and Technology–Taiwan

The delay-dependent and delay-independent conditions are proposed to guarantee the global exponential stability for uncertain switched neutral system with interval time-varying state delay. New additional nonnegative inequalities are introduced to improve the conservativeness of system. Razumikhinlike approach is used to prove the exponential stability for system. Structured and unstructured uncertainties are investigated in this paper. The solving schemes based on Linear Matrix Inequality (LMI) approach along with the selective examples are presented to demonstrate the improvements achieved.


Estimation Of Manning Roughness Coefficients On Precast Ecological Concrete Blocks, Te-Hsing Chang, Shen-Ting Huang, Shinne Chen, Jun-Cheng Lai Apr 2010

Estimation Of Manning Roughness Coefficients On Precast Ecological Concrete Blocks, Te-Hsing Chang, Shen-Ting Huang, Shinne Chen, Jun-Cheng Lai

Journal of Marine Science and Technology–Taiwan

Agricultural irrigation and drainage canals in Taiwan are generally constructed using concrete. Concrete is used for the safety of conveyance efficiency. It also reduced loss and is structurally safe. The irrigation ditches and soil revetments in Taiwan fitted with a strong concrete lining. The smooth nonporous concrete surface makes the biology perch difficult and causes a monotonous flow. For these reason, an artificial materials-precast ecological concrete blocks (PECBs) was developed in this research. This was done in order to modify both the traditional concrete lining and the natural field materials in canal construction. Precast ecological concrete blocks (PECBs) were tested …


Section Abstracts: Aeronautical And Aerospace Sciences Apr 2010

Section Abstracts: Aeronautical And Aerospace Sciences

Virginia Journal of Science

Abstracts of the Aeronautical and Aerospace Science Section for the 88th Annual Meeting of the Virginia Academy of Science, May 20-21, 2010, James Madison University, Harrisonburg, VA.


Towards Optimization Of A Low Temperature Co-Fired Ceramic Catalyst Chamber For A Monopropellant Microthruster, Andrew Vissotski Apr 2010

Towards Optimization Of A Low Temperature Co-Fired Ceramic Catalyst Chamber For A Monopropellant Microthruster, Andrew Vissotski

McNair Scholars Research Journal

The reduction in space vehicle size and mass presents the need to develop a proportionally smaller propulsion system for orbital station keeping. A Low Temperature Co-Fired Ceramic (LTCC) monopropellant micropropulsion device has been developed at BSU. The simple, robust design features a heterogeneous catalyst chamber used to decompose a rocket-grade hydrogen peroxide monopropellant, to produce thrust. Initial prototype testing indicates only partial peroxide decomposition requiring an in-depth analysis of the geometric layout of the devices to increase system efficiency. This study employs a control volume based methodology to analyze the performance of various catalyst chamber designs. This approach was chosen …


Section Abstracts: Astronomy, Mathematics, And Physics & Materials Science Apr 2010

Section Abstracts: Astronomy, Mathematics, And Physics & Materials Science

Virginia Journal of Science

Abstracts of papers of the Astronomy, Mathematics, and Physics (Including Materials Science) Section for the 88th Annual Meeting of the Virginia Academy of Science, May 20-21, 2010, James Madison University, Harrisonburg, VA.


Section Abstracts: Biomedical And General Engineering Apr 2010

Section Abstracts: Biomedical And General Engineering

Virginia Journal of Science

Abstracts of the Biomedical and General Engineering Section for the 88th Annual Meeting of the Virginia Academy of Science, May 20-21, 2010, James Madison University, Harrisonburg, VA.


Multilevel Dc-Ac Converter Interface With Solar Panels, Yue Cao Apr 2010

Multilevel Dc-Ac Converter Interface With Solar Panels, Yue Cao

Pursuit - The Journal of Undergraduate Research at The University of Tennessee

This paper presents a single-phase 11-level (5 H-bridge) cascaded multilevel DC-AC converter that has implemented a Phase Locked Loop (PLL) and Maximum Power Point Tracking (MPPT) with 5 separate solar panel DC sources. This topology upgrades the conventional 3-level Pulse Width Modulation (PWM) controlled converter with advantages such as smoother output waveforms, more flexibility in voltage range, smaller filter size, and switching angle control. Simulation results of voltage synchronization using PLL and experimental setup and results implementing the entire converter interface are also presented.


A Simple Technique For Surface Area Determination Through Supercritical Co2 Adsorption, Mahmud Sudibandriyo Apr 2010

A Simple Technique For Surface Area Determination Through Supercritical Co2 Adsorption, Mahmud Sudibandriyo

Makara Journal of Technology

The measurement of specific surface area of porous materials has long been important in physical sciences and is currently growing in importance in applied and environmental science. Numerous systems have been developed for surface area measurement by gas adsorption. Commercial systems are available which can measure a wide range of absolute surface area with relative ease. However, their cost is often prohibitive. In this study, an inexpensive apparatus for surface area measurement has been set up to be used for measuring supercritical adsorption of CO2. The Ono-Kondo Lattice model was used to represent the adsorption isotherm and to determine the …


Fishing Catch And Catch Rate Assesment Of Mini Trawl, Trapnet And Setnet Fisheries, Muhammad Firdaus Apr 2010

Fishing Catch And Catch Rate Assesment Of Mini Trawl, Trapnet And Setnet Fisheries, Muhammad Firdaus

Makara Journal of Technology

Fishing Catch and Catch Rate Assesment of Mini Trawl, Trapnet and Setnet Fisheries. This paper is aimed at assessing fishing catch and catch rate of the dragged gear on shrimp, trapnet, and setnet fisheries in Tarakan. The catch and effort data (number and species) and the fishing time of captured units were used in this qualitative analysis of fishing catch and catch rate to describe catch composition and catch rate from three catch fishery units in Tarakan. The result of the research shows that in the catching operation the dragged gear on shrimp has two main catch targets, which are …


Ontology-Based Automatic Classification For News Articles In Indonesian Language, Prajna Wira Basnur, Dana Indra Sensuse Apr 2010

Ontology-Based Automatic Classification For News Articles In Indonesian Language, Prajna Wira Basnur, Dana Indra Sensuse

Makara Journal of Technology

Ontology-Based Automatic Classification for News Articles in Indonesian Language. Searching specific information will be difficult if relying only on query. Choosing less specific queries will result in a lot of irrelevant information fetched by the system. One of the most successful ways to overcome this problem is to perform document classification based on the topic. There are many methods that can be used to conduct such a classification, such as using statistical and machine learning approaches. However, those document classification methods require training the data or learning the documents. In this study, the authors attempted to classify documents using a …


Particle Filter With Binary Gaussian Weighting And Support Vector Machine For Human Pose Interpretation, Indah Agustien, Muhammad Rahmat Widyanto, Sukmawati Nur Endah, Tarzan Basaruddin Apr 2010

Particle Filter With Binary Gaussian Weighting And Support Vector Machine For Human Pose Interpretation, Indah Agustien, Muhammad Rahmat Widyanto, Sukmawati Nur Endah, Tarzan Basaruddin

Makara Journal of Technology

This paper proposes human pose interpretation using particle filter (PF) with Binary Gaussian Weighting and support vector machine (SVM). In the proposed system, particle filter is used to track a human object, then this human object is skeletonized using thinning algorithm and classified using SVM. The classification is to identify human pose, whether it is normal or abnormal behavior. Here particle filter is modified through weight calculation using Gaussian distribution to reduce the computational time. The modified particle filter consists of four main phases. First, particles are generated to predict target’s location. Second, the weight of certain particles is calculated …


Maintenance Activity Planning By Reability Centered Maintenance Ii Method, Rachmad Hidayat, Nachnul Ansori, Ali Imron Apr 2010

Maintenance Activity Planning By Reability Centered Maintenance Ii Method, Rachmad Hidayat, Nachnul Ansori, Ali Imron

Makara Journal of Technology

Maintenance Activity Planning by Reability Centered Maintenance II Method. This research discusses maintenance activity planning using the RCM II method to evaluate failure function risk on compresor screw. The calculation of maintenance time is performed by considering maintenance and repair costs. The risk evaluation result with RPN shows that the critical component that needs to get the main priority in applying maintenance on compresor screw is function disorder on timeworn piston and on the broken outgoing air sponge’s filter that receives RPN 45. The optimum maintenance time calculation is applied on components that undergo scheduled restoration and scheduled discard task …


Software Design Of Mobile Antenna For Auto Satellite Tracking Using Modem Correction And Elevation Azimuth Method, Djamhari Sirat, Muhamad Asvial, Arman Djohan Diponegoro, Himawan Sidharta Apr 2010

Software Design Of Mobile Antenna For Auto Satellite Tracking Using Modem Correction And Elevation Azimuth Method, Djamhari Sirat, Muhamad Asvial, Arman Djohan Diponegoro, Himawan Sidharta

Makara Journal of Technology

Software Design of Mobile Antenna for Auto Satellite Tracking Using Modem Correction and Elevation Azimuth Method. Pointing accuracy is important in satellite communication. Because the satellite’s distance to the surface of the earth's satellite is so huge, 1 degree of pointing error will make the antenna unable to send data to satellites. To overcome this, the auto-tracking satellite controller is made. This system uses a microcontroller as the controller, with the GPS as the location indicator of the antenna, a digital compass as the beginning of antenna pointing direction, a rotary encoder as azimuth and elevation censor, and a modem …


Petroleum Degradation In Soil By Thermophilic Bacteria With Biopile Reactor, Astri Nugroho, Edison Effendi, Yulius Karonta Apr 2010

Petroleum Degradation In Soil By Thermophilic Bacteria With Biopile Reactor, Astri Nugroho, Edison Effendi, Yulius Karonta

Makara Journal of Technology

Crude oil degradation has been carried out using biopile reactor in total petroleum hydrocarbon (TPH) concentration of 5%, 10% and 15%. The thermophilic microorganisms used from isolation result and identification are Aeromonas salmonicida, Bacillus pantothenticus, and Stenotrophomonas maltophilia. The biodegradation of biopile reactor is done by various concentrations of TPH, total plate count (TPC), and volatile suspended solid (VSS) per day for 30 days. The biodegradation of kinetic parameter calculated consists of μ, μm, Y, Yt, Yobs, Kd, Ks from TPH concentration decision, and TPC and VSS in every microorganism with t (observation time) of 0 hour to 168 hours. …


Ergonomic Analysis Of Ui’S Bicyclesusing Posture Evaluation Index (Pei) Method In Virtual Environment, Erlinda Muslim, Boy Nurtjahyo, Zulkarnain Zulkarnain, Liza Afrinotha Apr 2010

Ergonomic Analysis Of Ui’S Bicyclesusing Posture Evaluation Index (Pei) Method In Virtual Environment, Erlinda Muslim, Boy Nurtjahyo, Zulkarnain Zulkarnain, Liza Afrinotha

Makara Journal of Technology

Ergonomic Analysis of UI’s Bicycles Using Posture Evaluation Index (PEI) Method in Virtual Environment. This research was conducted to study the ergonomic aspect of University of Indonesia’s bicycles in virtual environment. Software Jack 6.0 was used to analyze it. PEI was used as an approach that integrated the results of three methods: lower back analysis (LBA), ovako working posture analysis (OWAS), and rapid upper limb assessment (RULA). The research objective is to evaluate the existing design of University of Indonesia’s bicycles and to determine the most ergonomic redesign which concerns handlebar height and saddle height modification. The result showed that …


Bs News March/April Mar 2010

Bs News March/April

Building Services Engineering

No abstract provided.


Self-Activating Safety Mechanisms For Li-Ion Batteries, Xin-Ping Ai, Yu-Liang Cao, Han-Xi Yang Feb 2010

Self-Activating Safety Mechanisms For Li-Ion Batteries, Xin-Ping Ai, Yu-Liang Cao, Han-Xi Yang

Journal of Electrochemistry

The safety concerns of LIBs are considered to be a main obstacle to their high rate or large capacity applications in electric vehicles.This paper describes briefly our research works on the development of self-activating safety mechanisms for LIBs,including redox shuttle,potential-sensitive separator,temperature-sensitive electrode,and fire-retardent electrolyte.The problems and future in this research area are also discussed.


Effects Of Different Carbon Sources On Performance Of Li3V2(Po4)3/C Composite Cathode Materials, Kai-Yuan Liu, Jian-Shu Huang, Li Yang Feb 2010

Effects Of Different Carbon Sources On Performance Of Li3V2(Po4)3/C Composite Cathode Materials, Kai-Yuan Liu, Jian-Shu Huang, Li Yang

Journal of Electrochemistry

The monoclinic Li3V2(PO4)3 cathode materials were prepared by carbothermal reduction method,with methyl cellulose, chitosan(crab shells) or glucose anhydrous as carbon sources, respectively.The crystal structures, morphologies and the electrochemical performances were characterized by XRD, SEM and electrochemical measurement. The XRD patterns show that the samples obtained at 800 ℃ for 6 h have a pure monoclinic structure,which indicates that the carbon exists in amorphous phase. Electrochemical measurements show that the difference of carbon sources has a significant influence on the electrochemical properties of the materials. The Li3V2(PO4)3 …


Performance Of Sulfur-Super Conductive Carbon Black Composite In Electrolyte Mixed With Room Temperature Ionic Liquid, Bo Zhang, Si-Ting Chen, Xue-Ping Gao Feb 2010

Performance Of Sulfur-Super Conductive Carbon Black Composite In Electrolyte Mixed With Room Temperature Ionic Liquid, Bo Zhang, Si-Ting Chen, Xue-Ping Gao

Journal of Electrochemistry

The sulfur-super conductive carbon black composite was prepared as cathode material of lithium/sulfur battery.The composite was characterized by scanning electron microscopy(SEM),X-ray diffraction(XRD),and electrochemical impedance spectroscopy(EIS).The sulfur composite shows a high discharge capacity and a good cycle performance in electrolyte mixed with 50% of room temperature ionic liquid.In particular,the discharge capacity of the composite was stabilized at 483.6 mAh/g after 50 cycles.


Applications Of Block Copolymer Films In The Field Of Electrochemical Energy Systems, Jing-Ze Li, Guo-Guang Chen, Di Mei, Wei Zou, Jian-Wen Li, Motonori Komura, Tomokazu Iyoda Feb 2010

Applications Of Block Copolymer Films In The Field Of Electrochemical Energy Systems, Jing-Ze Li, Guo-Guang Chen, Di Mei, Wei Zou, Jian-Wen Li, Motonori Komura, Tomokazu Iyoda

Journal of Electrochemistry

A new series of amphiphilic liquid crystalline block copolymer thin films,having normally aligned and highly ordered nanocylinder array,were functionalized as anisotropic ion conducting materials by selectively infiltration.These ion-active nanocylinders are coaxially aligned and hexagonally arranged in a large area,which might be used as novel types of electrolyte films for electrochemical energy systems such as lithium ion battery,fuel cell,etc.Since the ordered cylinders can carry on and store the ions,the block copolymer films can be utilized as the advanced template to fabricate the ordered array of nanoporous,nanoparticles,and nanowires for the potential application in lithium ion battery as three dimensional electrode materials.


Preparation And Characterizations Of Li3V2(Po4)3 Cathode Material For Lithium Ion Batteries, Hong Chen, Tao Jiang, Chun-Zhong Wang, Gang Chen, Ying-Jin Wei Feb 2010

Preparation And Characterizations Of Li3V2(Po4)3 Cathode Material For Lithium Ion Batteries, Hong Chen, Tao Jiang, Chun-Zhong Wang, Gang Chen, Ying-Jin Wei

Journal of Electrochemistry

The carbon-coated Li3V2(PO4)3 was prepared by carbothermal reduction method.The structural and morphological properties of the material were studied by X-ray diffraction,FTIR and transmission electron microscopy.The synthesized material was a pure phase of Li3V2(PO4)3,with the particle size of about 100 nm.The values of Li ion diffusion coefficient of the material in the potential window of 3.0 ~ 4.3 V were nearly 3 orders larger than those in 3.0 ~ 4.8 V.In addition,the charge-transfer resistances in 3.0 ~ 4.3 V were much smaller than those in 3.0 …


Investigation Of Ceo2 As Cathode Electrocatalyst For Direct Borohydride Fuel Cell, Xue-Min Ni, Ya-Dong Wang, Mu Pan Feb 2010

Investigation Of Ceo2 As Cathode Electrocatalyst For Direct Borohydride Fuel Cell, Xue-Min Ni, Ya-Dong Wang, Mu Pan

Journal of Electrochemistry

The performance of CeO2 as oxygen reduction electrocatalyst in direct borohydride fuel cell was investigated.The experimental results indicate that CeO2 shows significant electrocatalytic performance for oxygen reduction and exhibits no observed promotion effect on hydrolysis or electro-oxidation of BH4-.The power density of experimental one-compartment fuel cell with CeO2 as cathode electrocatalyst can reach a 67.8 mW·cm-2 at room temperature.


Preparation And Electrochemical Behavior Of Li4Ti5O12 Nanosheets As Anode Material For Lithium Ion Battery, Yi-Fei Wang, Yu-Feng Tang, Zheng Qiu, Li Yang Feb 2010

Preparation And Electrochemical Behavior Of Li4Ti5O12 Nanosheets As Anode Material For Lithium Ion Battery, Yi-Fei Wang, Yu-Feng Tang, Zheng Qiu, Li Yang

Journal of Electrochemistry

Spinel lithium titanate(Li4Ti5O12) nanosheets with a size range of 200 ~400 nm were synthesized by hydrothermal process from the amorphous hydrous titanium oxide precursors.The as-prepared products were characterized by X-ray powder diffraction(XRD),scanning electron microscopy(SEM) and transmission electron microscopy(TEM).The electrochemical behaviors of Li4Ti5O12 electrode in conventional organic electrolyte and ionic liquid electrolyte were investigated by using cyclic voltammetry,galvanostatic charge-discharge and AC impedance techniques.The experimental results indicate that the as-prepared nanostructured Li4Ti5O12,evaluated as anode material,exhibited good reversibility and cycle performance.It is expected to be a …


Synthesis Of High-Performance Lini1/3Co1/3Mn1/3O2 Cathode Materials Via Azeotropic Distillation Method, Sheng-An Xia, Li-Xia Yuan, Ze Yang, Zhao-Hui Wang, Yun-Hui Huang, Shuang Li, Wu-Xing Zhang, Ya-Bin Meng, Wei-Gong Zheng Feb 2010

Synthesis Of High-Performance Lini1/3Co1/3Mn1/3O2 Cathode Materials Via Azeotropic Distillation Method, Sheng-An Xia, Li-Xia Yuan, Ze Yang, Zhao-Hui Wang, Yun-Hui Huang, Shuang Li, Wu-Xing Zhang, Ya-Bin Meng, Wei-Gong Zheng

Journal of Electrochemistry

Layered LiNi1/3Co1/3Mn1/3O2 is one of the most promising alternative materials for LiCoO2 in lithium ion batteries due to its low cost,large capacity and excellent cyclability.In this paper,LiNi1/3Co1/3Mn1/3O2 was synthesized via azeotropic distillation method with isobutyl alcohol as an azeotropic agent.The structure and surface morphology were characterized by X-ray diffraction(XRD) and scanning electron microscope(SEM),respectively.The as-prepared LiNi1/3Co1/3Mn1/3O2 shows a layered α-NaFeO2 structure;the particles are small and uniformly distributed.As compared with the sample prepared by traditional method,the present cathode material …


Electrochemical Behavior Of Co-Ru Composite In Alkaline Solution, Su-Mei Yao, Guo-Chun Li, Xue-Ping Gao Feb 2010

Electrochemical Behavior Of Co-Ru Composite In Alkaline Solution, Su-Mei Yao, Guo-Chun Li, Xue-Ping Gao

Journal of Electrochemistry

The electrochemical properties of Ru doped cobalt hydroxides synthesized via homogeneous chemical co-precipitation were investigated in 6 mol·L-1 KOH solution by galvanostatic charge-discharge process and cyclic voltammetry(CV).It is demonstrated that Ru doped cobalt hydroxides exhibited good capacitive characteristic and high specific capacitance.The sample with a Co/Ru molar ratio of 8 /1 shows the optimized electrochemical performance,including capacitive property and discharge capacity.The microstructure and morphology of the obtained Ru doped hydroxides were characterized by X-ray diffraction(XRD) and scanning electron microscope(SEM).The amorphous structure of ruthenium dioxide nanoparticles and single-crystal structure of Co(OH)2 platelets were confirmed.Based on a structure analysis and …


The Electrochemical Characteristics Of Cpo-Pll/Gc Electrode, Wen Zhao, Xia-Qin Wu, Zhong-Qing Lu, Wen-Jing Hou, He-Xing Li Feb 2010

The Electrochemical Characteristics Of Cpo-Pll/Gc Electrode, Wen Zhao, Xia-Qin Wu, Zhong-Qing Lu, Wen-Jing Hou, He-Xing Li

Journal of Electrochemistry

Poly-L-lysine(PLL) was electropolymerized onto the surface of glassy carbon(GC) electrode.1[(3-dimethylamino)propyl]-3-ethylcarbodiimide hydrochloride(EDC) was used as a Cross-linking agent to immobilized Chloroperoxidase(CPO) onto the PLL/GC electrode.A pair of well-defined redox peaks was observed at CPO-PLL/GC electrode,which clearly suggested that PLL can promote the direct electron transfer between the CPO and the GC electrodes.The cyclic voltammetry results also showed that the electron transfer at CPO-PLL/GC is a surface adsorption-controlled quasi-reversible process,which is accompanied with proton transfer.The CPO-PLL/GC electrode exhibited a good electrochemical stability and excellently electrocatalytic activity for electrochemical reduction of O2.


Electrochemical Corrosion Behavior Of Tio2/Ha Composite Coating On Medical Titanium In Tyrode's Physiological Solution, Li-Li Kong, Long-Xiang Lin, Rong-Gang Hu, Fan Zhang, Chang-Jian Lin Feb 2010

Electrochemical Corrosion Behavior Of Tio2/Ha Composite Coating On Medical Titanium In Tyrode's Physiological Solution, Li-Li Kong, Long-Xiang Lin, Rong-Gang Hu, Fan Zhang, Chang-Jian Lin

Journal of Electrochemistry

Titanium and its alloys have been widely used as medical implant materials because of their good mechanical properties and biocompatibility.However,the physiological corrosion of metal will release metal ions,resulting in toxic and side effects.In this paper,in order to improve the corrosion resistance of titanium,and to enhance its bioactivity and osseointegration,the surface modification of titamum were performed.Using eletrochemical methods Tafel polarization and electrochemical impedance spectroscopy(EIS) were applied to study the electrochemical corrosion behavior of TiO2 /HA composite coating.It is indicated that the corrosion resistance of the prepared TiO2 /Ti material in Tyrode's physiological solution is improved because of the enhanced …