Engineering Commons^™

90° To 360°, Holly Paronelli

The Transdisciplinary STEAM+ Journal

When I hear STEM (Science, Technology, Engineering and Mathematics) and Art I think of Math and value. Even though there is value in STEAM (Science, Technology, Engineering, Art and Mathematics) the value as a whole cannot be fully calculated. Art is too indefinite, to vast, too infinite to be calculated, but aspects of STEM can be. Yet even then what we think we know comes down to interpretation, fact is fact for only a while.

Quantum Man, Julian Voss-Andreae

The Transdisciplinary STEAM+ Journal

According to quantum physics, the world is fundamentally quite different than it seems. Drawing inspiration from the underlying nature of reality, former quantum physicist Julian Voss-Andreae created an image of a walking human as a quantum object. Made up of parallel sheets of steel, the sculpture is a metaphor for the counter-intuitive world of quantum physics. Symbolizing the dual nature of matter with the appearance of classical reality on the surface and cloudy quantum behavior underneath, the sculpture seems to consist of solid steel when seen from the front, but dissolves into almost nothing when seen from the side.

The Wiseman, James William Sobieski

The Transdisciplinary STEAM+ Journal

I created this artwork for a gallery show of masks. I have always been an auto-didact. I turned my love of books and learning into a sculpture that is a self-portrait. It is an icon of the power knowledge brings. A mask is a protective barrier between the wearer and the world. The paper word-filled book pages create a fierce and intimidating grill. I love working with a variety of materials and constructing objects that demand the viewer to think.

Migration Grid #26, Stanton Hunter

The Transdisciplinary STEAM+ Journal

This work is inspired by invisible sky grids formed by Ultra Violet (UV) light researchers discovered that guide Monarch butterflies on their migration from the mid-western United States to the Sierra Madre Mountains in Mexico. I use terrestrial material, clay, to make something celestial. Earth, associated with mass and permanence, is translated into these shifting, ephemeral, and ethereal sky-forms. The work encompasses void more than object and the complex shadows they cast are immaterial. Together, the objects and shadows point to what can’t be seen, at least by the human eye.

Towards A “Cloud Curriculum” In Art And Science?, Roger Malina

The Transdisciplinary STEAM+ Journal

Recently an email hit my desk from Paul Thomas in Australia with a proposal to work together on a “Cloud Curriculum for Art and Science”. I immediately agreed to collaborate. I don’t yet have a clue of what a cloud curriculum is, but what I do know is that we are ‘backing into the future’ in educational institutions and we desperately need a ‘cloud curriculum.’ We need to look over the ten year horizon. And in the emerging art-science field I doubt that the usual approach to curriculum development will work.

Steam...Now!, John Eger

The Transdisciplinary STEAM+ Journal

With America slowly awakening to the need to turn out creative and innovative workers who can join the 21^st century (its already 2012) workplace -- because they have the new thinking skills --we have to change the current emphasis on STEM, for Science, Technology, Engineering and Math to STEAM, by insuring that the whole brain is nurtured through the arts: thus STEAM.

On Cultural Polymathy: How Visual Thinking, Culture, And Community Create A Platform For Progress, Whitney Dail

The Transdisciplinary STEAM+ Journal

Within the last decade, the commingling of art and science has reached a critical mass. Science has long infused the arts with curiosity for natural phenomena and human behavior. New models for producing knowledge have given rise to interaction and collaboration across the globe, along with a renewed Renaissance.

Getting Real About The E In Steam, James Catterall

The Transdisciplinary STEAM+ Journal

STEM and STEAM are in the news. Researchers and educators in my field (cognition, art, and creativity) argue reasons for adding the A to STEM. While I visit this below, my focus is elsewhere. In this brief essay, I want to explore the meaning and importance of the E appearing in both STEM and STEAM. What’s engineering doing in this mix? And what are some reasons for affirming the arts when the role of engineering is clarified?

A Letter To The Steam Journal Readers, Deborah Freund

The Transdisciplinary STEAM+ Journal

A letter to the readers from the President of Claremont Graduate University, President Deborah Freund, welcoming the inaugural issue of 'The STEAM Journal'.

Bringing To Life The World’S Tallest Structure, Jonathan Weigand

Pursuit - The Journal of Undergraduate Research at The University of Tennessee

Intended as the centerpiece of constructional developments in Dubai, the Burj Khalifa now stands as the tallest building ever constructed. The uniquely designed foundation consists of a concrete raft supported by a cast-in-place pile system protected by waterproofing membrane to inhibit corrosion. The structural design integrates high-performance reinforced concrete and steel and incorporates an engineered “Y” shape that limits the lateral wind pressure on the building. Engineers applied the latest advancements in high-rise technology to develop an optimized construction plan that consisted of segmented tasks that promoted the staff to work at a quick yet manageable pace. This article details …

In-Situ Condition Monitoring Of Components In Small Modular Reactors Using Process And Electrical Signature Analysis, Victor Lollar

Pursuit - The Journal of Undergraduate Research at The University of Tennessee

Components in small modular reactors (SMRs) are located in a hazardous environment and must be monitored remotely. Electrical signature analysis (ESA) is a viable option for component monitoring as it can be implemented on-line away from the actual equipment. This research attempts to use both electrical signatures from a pump motor and process variables such as flow and pressure to effectively monitor reactor components. An experimental flow loop with pump health monitoring equipment and a data acquisition system was used for experiments. Process variables analyzed include pressure, flow rate, water level, and motor vibrations. The electrical signatures monitored were the …

Advanced
 Biological 
And 
Biomedical 
Applications 
In 
Electrical 
Engineering, Dr. Neal K. Bangerter, Dr. Brian A. Mazzeo

Journal of Undergraduate Research

The 
aim 
of 
the 
awarded 
MEG 
grant
 was 
to
 provide
 seed 
funding 
to 
establish
 a
 mentorship 
program 
for
 undergraduate 
students 
wishing
 to
 prepare 
for 
careers 
or 
graduate
 work 
in 
biological
 or 
biomedical
 applications 
of 
electrical
 engineering. 

Such
 a 
program
 has 
been
notably 
absent
in
 the
 College 
of
 Engineering 
at
 BYU.

A Framework For Oil Price Benchmark Determination: Lessons For Nigeria, Taiwo H. Sanni, Bassey D. Akpan

Bullion

The main thrust of this paper is to draw lessons of experience from other selected oil producing countries. the outcome of the study is expected to help in strengthening Nigeria's oil price framework in line with international best practice. Section 2 dwells on the theoretical and literature review on oil based fiscal rule, while section 3 presents the framework for oil price benchmark determination and section 4 examines those factors capable of stimulating determination of oil price benchmark, lastly section 5 discusses some lessons of experience from Nigeria and then the conclusion.

Fuel Subsidy And Other Unproductive Public Expenditures Removal: A Pragmatic Approach To Restructure And Transform The Nigerian Economy, Lawrence O. Akinboyo

Bullion

While the short term measures to reduce recurrent expenditure are necessary conditions for fiscal sustainability, the long term imperative is to increase revenue. Thus, efforts should be made by the fiscal authorities in Nigeria to pursue the policy of balancing of expenditure with revenue improvements. The issues of the underperformance of the capital budget should be reversed before savings from cuts in recurrent expenditure can be diverted to the financing of capital expenditure. From the analysis, we say that removal of fuel subsidy would no doubt have some social and economic hardship on the people in the short run, However, …

Bs News March/April

Building Services Engineering

No abstract provided.

Teaching Technical Engineering Courses From A Christian Perspective: Two Examples, Charles C. Adams

Pro Rege

Engineering professors, like those of the natural sciences, usually teach by breaking the subject matter into parts, that is, courses and activities that are logically abstract from each other. While together comprising a coherent whole, those individual parts too easily foster abstractionism, the view that such subjects as calculus, fluid mechanics, engineering design, and engineering ethics “really are” separable from one another. Such a view militates against a Christian perspective of engineering, technology, and reality in general by replacing the organic wholeness of life before the face of God with the compartmentalization that is characteristic of modern science and naturalism. …

Combination And Applications Of Time-Resolved Surface Plasmon Resonance Spectroscopy And Electrochemical Methods, Yu Bao, Yan Mao, Wei Wang, Zheng-Gang Li, Li Niu

Journal of Electrochemistry

Electrochemical-surface plasmon resonance (EC-SPR) technique, developed in recent years, is a new technology which combines time-resolved surface plasmon resonance spectroscopy and electrochemical methods. Surface plasmon resonance (SPR) is a physical phenomenon generated by optical coupling using a metallic thin film and is very sensitive to optical analysis. The principles of SPR and EC-SPR are briefly introduced and the applications of the combination of SPR spectroscopy with electrochemical techniques are reviewed in this paper. This new technology has been widely used in such research areas as reaction dynamics, biochemical sensors, electrode/electrolyte interfaces, kinetic parameters and bimolecular interactions.

High Performance Membrane Electrode Assembly With Low Platinum Loadings Prepared By Atomic Layer Deposition For Pemfc Application, Ting Shu, Shi-Jun Liao, Chien-Te Hsieh, Ay Su

Journal of Electrochemistry

A high performance membrane electrode assembly (MEA) with low platinum loadings was successfully prepared with atomic layer deposition (ALD) technique. The anode of the MEA was prepared by depositing platinum on the carbon paper substrate, which was prepared by coating the slurry of carbon black (XC-72R) and Teflon, followed by drying and calcining at 350 °C. The MEAs consisted of the ALD anode or commercial catalyst anode, pretreated Nafion membrane (Nafion-117) and commercial cathode. Performances of MEAs were measured by single cell testing, and the anodes and MEAs were characterized by CV, SEM, TEM and XRD. The results revealed that …

Electrochemical Performance Of Fe3O4/C Composites As Negative Material For Lithium-Ion Batteries, Jun-Jie Cai, Shu Yao, Ze-Sheng Li, Hui Meng, Pei-Kang Shen

Journal of Electrochemistry

The Fe₃O₄/Carbon composites have been synthesized through coprecipitation pathway and by insitu aniline polymerization as a carbon source. Structural characterization and morphological study of the composites were investigated by using XRD, SEM and TEM techniques. The results showed that the nanosized Fe₃O₄ particles (40 ~ 80 nm) were encapsulated in the amorphous carbon. During the electrochemical tests, the Fe₃O₄/C composites exhibited high capaticity and excellent cycle ability, the retention of capaticity was about 1000 mAh·g^-1 after 30 cycles of charge/discharge tests at 50 mA·g^-1.

A Comparative Study Of Charge-Discharge Behaviors Of α-Pbo2 And β-Pbo2 Cathodes, Cong-Ying Cui, Xue-Mei Ma, De-Long Kong, Hou-Yi Ma

Journal of Electrochemistry

The α-PbO₂ and β-PbO₂ powders were prepared using simple chemical synthetic methods, and their crystalline structures and surface morphologies were characterized with X-ray powder diffraction spectroscopy and scanning electron microscopy. Using the as-synthesized α-PbO₂ and β-PbO₂ powders as positive active materials, the electrochemical performance of the two PbO₂ materials was investigated by means of cyclic voltammetry, galvanostatic charge-discharge tests, and electrochemical impedance spectroscopy. The results indicate that the discharge capacity of α-PbO₂ electrode is larger than that of β-PbO₂; moreover, the composite electrodes made by α-PbO₂ and β-PbO₂ mixtures with …

An In Situ Ftir Spectroelectrochemical Study On Methanol Oxidation At Pt-Mo2C/Gc Catalyst, Hai-Ping Huang, Xi-Yu Yao, Pei-Kang Shen

Journal of Electrochemistry

A 40% Pt on Mo₂C/GC catalyst has been prepared by ion exchange method. The mechanism of methanol electrooxidation on Pt-Mo₂C/GC and commercial Pt/C catalysts in acidic media was studied by cyclic voltammetry, XRD measurements and in-situ Fourier transform infrared spectroelectrochemistry. The results revealed that the Pt nanoparticles were uniformly dispersed on Mo₂C/GC with an average particle size of 3 nm. The cyclic voltammetric and chronopotentiometric experiments indicated that Pt-Mo₂C/GC catalyst exhibited a better performance for methanol oxidation than that of Pt/C in acid solution. A negative shift over 90 mV of the …

Applications Of Ellipsometry In The Investigations Of Electrode-Solution Interface, Jing-Lei Lei, Liang-Liu Wu, Ling-Jie Li, Sheng-Mao Wu, Sheng-Tao Zhang

Journal of Electrochemistry

Ellipsometry is an optical technique with high-sensitivity to quantitatively obtain surface/interface properties such as thickness andrefractive index by analyzing the changes in polarized light reflected from the surface/interface. Its noncontacting and nondestructivenature makes it possible to acquire thein situreal-time information of the change at the surface/interface. Therefore, ellipsometry has been used widely in the electrochemical investigations. In this paper, based on the brief introduction of the measurementprinciple of ellipsometry, the current progress and the future trends of ellipsometry in electrochemistry arediscussed. The applications of ellipsometry in the fields of conversion and storage of electrochemical energy, electrochemistry ofmaterials science,electroanalysisand bioelectrochemistry are …

Oxygen Reduction Reaction On Glycin Modified Pt(111) Electrode, Ming-Fang Li, Jing Kang, Ling-Wen Liao, Yan-Xia Chen, Shen Ye

Journal of Electrochemistry

O

xygen reduction reaction (ORR) on glycin (NH₂CH₂COOH) modified Pt(111) electrode has been investigated using hanging meniscus rotating disk electrode system (HMRD) in 0.05 mol•L^-1 H₂SO₄ and 0.1 mol•L^-1 HClO₄ solutions, respectively. Cyclic voltammograms of the glycin modified Pt (111) electrode measured in 0.05 mol•L^-1 H₂SO₄ solution similar to that of CN^- modified Pt(111) electrodes, demonstrating that sulfate adsorption is strongly inhibited at the glycin modified Pt(111). From the polarization curve of ORR recorded in 0.05 mol•L^-1 H₂SO₄ solution, it is …

Porous Electrodes With High Pt Utilization Obtained By Ion-Exchange/Electrodeposition, Si-Guo Chen, Wei Ding, Xue-Qiang Qi, Li Li, Zi-Hua Deng, Zi-Dong Wei

Journal of Electrochemistry

We report a novel method based on ion-exchange/electrodeposition (IEE) for constructing high Pt utilization porous electrodes. The electrode prepared using IEE was assessed by linear sweep voltammetry (LSV), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and single cell test. The preliminary results show that the undesired ion-exchange between Pt anion and surface functional group in carbon black can be eliminated through the electrode preparation process, and every Pt particle prepared by IEE is expected to be deposited on the three-phase reaction zone and thus can be fully utilized in fuel cell reactions. The Pt particle size, shape and distribution …

Effect Of Ti/Pbo2 Electrodes Doped With Different Elements On Electrocatalytic Oxidation Characteristics Of Phenol, Xiao-Lei Liu, Yuan-Yuan Dan, Hai-Yan Lu, Hai-Bo Lin, Ming-Li Ouyang, Chuan-Jun Yun

Journal of Electrochemistry

Three types of electrodes, namely, Ti/PbO₂, F-doped PbO₂ (Ti/PbO₂-F) and nano-Co₃O₄-doped PbO₂ (Ti/PbO₂+Nano-Co₃O₄) electrodes, were prepared by electro-deposition method on the Ti substrate with the interlayer of SnO₂-Sb₂O₅. X-ray diffraction (XRD) and scanning electron microscopy (SEM) were used to study the compositions, structures and film morphologies of the electrodes. Electrocatalytic oxidation characteristics to phenol on the prepared electrodes were investigated by electrochemical method. The experimental results showed that compared with the Ti/PbO₂ electrode, the potentials of oxygen …

A Dft Calculation Screening Of Pt-Based Bimetallic Catalysts For Oxygen Reduction, Li-Hui Ou, Sheng-Li Chen

Journal of Electrochemistry

Developing Pt-lean catalysts for oxygen reduction reaction (ORR) is the key for large-scale application of proton exchange membrane fuel cell (PEMFC). In this paper, we have proposed a multiple-descriptor strategy for screening efficient and durable ORR alloy catalysts of low Pt content. We argue that an ideal Pt-based bimetallic alloy catalyst for ORR should possess simultaneously negative alloy formation energy, negative surface segregation energy of Pt and a lower oxygen binding ability than pure Pt. By performing detailed DFT calculations on the thermodynamics, surface chemistry and electronic properties of various Pt-M alloys (M refers to non-precious transition metals in the …

Sodium Carbonate Catalyzed Photoelectrochemical Water Splitting Over Tio2 Nanotubes Photoanode, De-Sheng Kong, Jing Wang, Xue-Di Zhang, Xi Zhao, Chao Wang, Yuan-Yuan Feng, Wen-Juan Li

Journal of Electrochemistry

Surface recombination of the photogenerated electron-hole pairs at semiconductor/electrolyte interface is one of the most essential reasons responsible for lowering photoconversion efficiency (Φ) of light to chemical energy for photoelectrochemical (PEC) water splitting reaction. In this paper, the catalytic effect of sodium carbonate on the oxygen evolution reaction (OER) over TiO₂ nanotubes photoanode during PEC water splitting was investigated by performing photocurrent and ac impedance measurements. It was demonstrated that the addiction of 1 mmol•L^-1 Na₂CO₃ in 0.5 mol•L^-1 NaClO₄ electrolyte can effectively improve the charge transfer properties for the photogenerated holes across …

Harnessing The Wind: Colby Alumni Bring Booming Wind-Farm Industry To Maine And The Northeast, Douglas Rooks

Colby Magazine

Wind power is emerging as a major source of clean energy in Maine and New England, and Colby alumni are prominent players, from developing wind farms to erecting the towering turbines.

A High Figure-Of-Merit Low Phase Noise 15-Ghz Cmos Vco, Yao-Chian Lin, Mei-Ling Yeh, Chung-Cheng Chang

Journal of Marine Science and Technology–Taiwan

A monolithic inductor-capacitor tank (LC-tank), voltagecontrolled oscillator (VCO) with high figure-of-merit (FOM), low phase noise, and low power consumption is presented for Ku-Band applications. The p-type metal-oxide-semiconductor (PMOS) differential cross-coupled topology is adopted in this design to reduce the phase noise. The measured phase noise at 1 MHz offset is -116.6 dBc/Hz at the frequency of 15.57 GHz. The excellent FOM is -192.66 dBc/Hz and the power dissipation is 6 mW. The tuning range is approximately 290 MHz with control voltage of 0 to 1.8 V. The chip size is 0.51 × 0.74 mm2 . The VCO was implemented in …

Criteria For The Initiation Of Modes Of Response Of A Caisson Subjected To A Breaking Wave Force, Jaw Guei Lin, Chi Chao David Tung

Journal of Marine Science and Technology–Taiwan

This paper concerns problems of a caisson subjected to a breaking wave force: (1) what are the possible modes of response and (2) the conditions initiate into these modes. These two questions have not been studied. The objective of this paper is to answer these two questions. However, the actual response of a caisson that takes place in each mode is not addressed in this study. A caisson placed on a horizontal frictional base, subjected to a concentrated horizontal force of short duration, applied to the seaward side face of the caisson and accompanied by a corresponding uplift force on …