Engineering Commons^™

The Effect Of Zephyr Layer Orientation On Zephyrboard Made From Oil Palm Petiole, Lusita Wardani, Muhamad Yusram Massijaya, Yusuf Sudo Hadi, I Wayan Darmawan

Makara Journal of Technology

It is very important to utilize oil palm petiole for the production of zephyr boards. This study aimed to analyze the effect of layer orientation on zephyr board quality. Zephyr boards were made with three coating patterns (A = cross perpendicular, B= combine A and C, and C= paralell) and five zephyr layers using urea formaldehyde adhesive. They were pressed for 20 min at a pressure of 25 kgf/cm² and a temperature 120 ºC, to a target density of 0.80 g/cm³ and a size of 300 mm X 300 mm X 12 mm. Our results showed that the physical and …

Performance Evaluation Of An Optimized Floating Breakwater In Oblique Waves With A Higher-Order Boundary Element Method, Faisal Mahmuddin, Masashi Kashiwagi

Makara Journal of Technology

In the previous study, the optimal performance of a two-dimensional (2D) floating breakwater shape was obtained. The performance of this shape was also confirmed with a model experiment in a towing tank. Moreover, the shape’s performance in three dimensions (3D) was investigated in a subsequent study. However, to predict the shape’s performance in a real application more accurately, the shape’s characteristics in oblique waves must also be evaluated. In this study, the performance and characteristics of the model (hydrodynamic forces, body motions, wave elevations, and drift forces) are computed using a higher-order boundary element method (HOBEM). The HOBEM, which is …

Viologen Oxidation Properties, Adam Read, Dr. William Pitt

Journal of Undergraduate Research

The world always stands in need of a more efficient and low cost energy sources. Fuel cells present an environmentally friendly source of energy that could potentially replace the current fossil fuels that are now used. In addition fuel cells are normally light weight and have the ability to work in isolated regions where power is not easily accessible. Fuel cells have shown great potential but as of yet are not an economically favorable energy source due to high cost. One of the main reasons for this is the high cost of platinum which is commonly used as a catalyst. …

Encapsulating Liposomes For Stabilized Drug Delivery, Corbin Jacobs, Dr. William Pitt

Journal of Undergraduate Research

Liposomes are tiny vesicles composed of materials similar to a cell membrane’s bilayer and “are useful for delivering anticancer agents to tumors and reducing the severe side effects of the agents.”1 Following synthesis, liposomes containing drug are administered intravenously. Fortunately, tumors have hyperpermeable vasculature which facilitates liposomal accumulation by their leaking out of the capillaries surrounding the tumor.2 Once near the tumor, individual cells will endocytose or engulf the vesicles as long as they are between 10 nm and 1000 nm.3

A2 Protein Incorporation Into The Qβ Virus-Like Particle, Derek Bush, Dr. Band Bundy

Journal of Undergraduate Research

Virus-like Particles (VLPs) are noninfectious synthetic copies of the outer protein shell of viruses. They are highly symmetrical nanostructures that self-assemble from approximately 200 copies of a single “coat” protein. This symmetry makes attachment of singular foreign entities to the VLPs difficult, which limits their current uses in medical and engineering applications. In this research project we have worked to demonstrate the insertion of a single copy of the “A2” protein into the VLP from the Qβ bacteriophage to serve as a possible location for future site-specific VLP modification. Ultimately we believe that this work will lead to the development …

Cfd Black Liquor Bed Simulation, Benjamin Ohran, Dr. Larry Baxter

Journal of Undergraduate Research

The objective of this project was to further the understanding of the bed region of a black liquor recovery boiler. The net output of carbon dioxide from burning black liquor (a paper pulping by-product) is zero, making it a desirable alternative fuel source; however, there are other problems associated with burning black liquor such as boiler fouling, and emissions of pollutants. With the understanding gained from this project it will be possible to further improve the efficiency and emissions of black liquor boilers, making it a more viable fuel alternative.

A High-Quality Professional Development For Teachers Of Grades 3–6 For Implementing Engineering Into Classrooms, S. Selcen Guzey, Kristina Tank, Hui-Hui Wang, Gillian Roehrig, Tamara J. Moore

School of Engineering Education Faculty Publications

With the increasing emphasis on integrating engineering into K-12 classrooms to help meet the needs of our complex and multidisciplinary society, there is an urgent need to investigate teachers' engineering-focused professional development experiences as they relate to teacher learning, implementation, and student achievement. This study addresses this need by examining the effects of a professional development program focused on engineering integration, and how teachers chose to implement engineering in their classrooms as a result of the professional development. 198 teachers in grades 3–6 from 43 schools in 17 districts participated in a yearlong professional development program designed to help integrate …

Scitech News [Full Issue]

Sci-Tech News

No abstract provided.

Bs News March/April

Building Services Engineering

No abstract provided.

Two Bit Circus, Elise Lemle

The Transdisciplinary STEAM+ Journal

Two Bit Circus collaborated with the Girl Scouts of the Greater Los Angeles Area to explore the exciting world of wearable electronics. Over the course of the program, the students explored concepts of introductory electronics while designing and creating their own illuminated fashion piece. The program was held in Montrose, CA in Fall 2013. The students were approximately 10 girls ages seven to 14. The program was held over seven sessions with each session lasting 80 minutes.

Celestial Messenger, Bijian Fan

The Transdisciplinary STEAM+ Journal

This dragon sculpture is embedded with binary code in the form of 1s and 0s, they are generated by light transmission through the holes.

Spannungsfeld, Julian Voss-Andreae

The Transdisciplinary STEAM+ Journal

My design for a sculptural installation for the University of Minnesota’s new Physics and Nanotechnology Building is inspired by a view of the human body through the lens of quantum physics.

The German title of the installation (literally "tension field") originated in physics but is used in contemporary German almost exclusively in a metaphorical sense, implying a dynamic tension, often between polar opposites, that permeates everything in its vicinity.

Electrochemical Performance Of Si-C Composites Prepared By Discharge-Plasma Assisted Milling, Yu-Long Chen, Ren-Zong Hu, Hui Liu, Wei Sun, Min Zhu

Journal of Electrochemistry

Silicon-carbon (Si-C) composites, with microstructure of multi-scaled Si particles being homogenously dispersed in micro-sized carbon matrix, had been prepared by dielectric barrier discharge plasma assisted two-step milling for the first time. The Si-C composite anode had a discharge capacity of 1259 mAh·g^-1 at the first cycle, while the capacity retained 474 and 396 mAh·g^-1 after 20 and 100 cycles, respectively. Charge-discharge curves and AC impedance response indicated that both silicon and carbon phases in the composite anode were involved during the lithiation/delithiation reactions and the electron transport resistance in the Si-C composite anode was much lower than that …

Preparation Of High Performance Porous Silicon Powders By Etching Al-Si Alloy In Acid Solution For Lithium Ion Battery, Shi-Ji Hao, Chun-Li Li, Kai Zhu, Ping Zhang, Zhi-Yu Jiang

Journal of Electrochemistry

Porous silicon powders prepared by etching Al-Si alloy using an acid solution was reported in the first time. The morphology and structure of as-obtained material were investigated using scanning electron microscopy (SEM) and X-ray diffraction (XRD) method. It was found that the spongy porous silicon powders presented well crystalline structure and consisted of nano-Si particles. The particle size of porous Si powders was about 20 μm, and the specific surface area was 102.7 m²·g^-1. The electrochemical properties of porous silicon powders were evaluated as an anode material for lithium ion batteries. The material proportion in the …

Pulse Electrodeposition Of Pd-Ni Alloy Nanoparticles For Electrocatalytic Oxidation Of Formic Acid, Fang-Zu Yang, Jun-Pei Yue, Zhong-Qun Tian, Shao-Min Zhou

Journal of Electrochemistry

The Pd-Ni alloy nanoparticles with nickel atomic contents of 12.0%, 16.4% and 22.6% were successfully electrodeposited from a Pd-Ni alloy electrolyte by square wave pulse plating. The alloy nanoparticles were in the spherical shape with a diameter of 50 ~ 80 nm. As the growth potential of the alloy was negatively shifted, the nickel content of the alloy was increased, and the size of the nanoparticles was almost the same, whereas the number, the degree of crosslinking and the real active area of the nanoparticles were increased. As the nickel content of the alloy nanoparticles increased, the peak current for …

Underpotential Deposition Of Germanium On Au(111) And Pt(111) Surfaces In Ionic Liquids, Xu-Fen Xie, Jia-Wei Yan, Jing-Hong Liang, Ji-Jun Li, Meng Zhang, Bing-Wei Mao

Journal of Electrochemistry

The underpotential deposition (UPD) of germanium (Ge) in BMIPF₆ ionic liquids on Au(111) and Pt(111) surfaces have been investigated by cyclic voltammetry (CV) and in-situ scannin tunneling microscopy (STM). The CV results show that there are two reduction peaks related to the electrodeposition of Ge. The first reduction peak appeared in the CV curve may cover the transformation of Ge⁴⁺ to Ge²⁺ and the UPD of Ge. The second reduction peak corresponds to the bulk deposition of Ge. In-situ STM study suggests that the two UPD layers of Ge are formed on Au(111) and Pt(111) surfaces. The …

Synthesis And Electrochemical Properties Of Lico1-XMgXMno4 And Lico1-XAlXMno4 (X= 0, 0.02, 0.05, 0.1) As Positive Materials For Lithium-Ion Batteries, Mei-Ling You, Qing-Song Tong, Xiu-Hua Li, Min Lin, Xing-Kang Huang, Yong Yang

Journal of Electrochemistry

The Al-doped and Mg-doped LiCoMnO₄ materials were synthesized through solid-state reaction. The effects of doping amounts of Mg and Al on the initial capacities, discharge plateaus, and cycle performances were investigated. The morphologies and structures of the as-prepared materials were studied by scanning electron microscopy and powder X-ray diffraction. The results indicate that the as-prepared samples were composed of uniform, well-crystallized particles. The pristine LiCoMnO₄ possessed an initial capacity of 87.0 mAh·g^-1, while LiCo_0.98Mg_0.02MnO₄ and LiCo_0.98Al_0.02MnO₄ delivered 91.3 and 93.6 mAh·g^-1, respectively. The proper …

Passivation Behavior Of Aluminum Alloy During Electrochemical Machining And Its Effects On The Machining Performance, Li-Min Jiang, Wen-Bo Deng, Jun-Long Ying

Journal of Electrochemistry

The passivation behavior of aluminum alloy during electrochemical machining was investigated and discussed. The effects of processing voltage, current density, space of electrodes and electrolyte composition on electrochemical machining performance were explored. The results indicate that the electrochemical machining aluminum alloy in the composite electrolyte system containing NaNO₃ and NaF existed passivation phenomenon. Passivation action decreaseed the current efficiency and made it varied greatly with the current density. Also the passivation shifted the interspace characteristic curve of electrode notably to a negative direction. There was not passivation phenomenon in the composite electrolyte system containing the same concentrations of NaCl …

Fabrication And Impedance Performance Of Gradient Lani0.6Fe0.4O3-δ-Gd0.2Ce0.8O2 Composite Cathodes For Intermediate Temperature Solid Oxide Fuel Cell, Yang Li, Bo Huang, Meng Yuan, Zhi-Qiu Zhang, Zong-Yao Liu, Xu-Chen Tang, Xin-Jian Zhu

Journal of Electrochemistry

A LNF-GDC composite cathode with a gradual change in the composition between ScSZ electrolyte and LNF cathode was fabricated to reduce the cathode polarization resistance (R_p). The gradual change in composition between ScSZ electrolyte and LNF cathode shows the decreases in the charge transfer resistance (R_ct) and gas phase diffusion resistance (R_d). The results revealed that the Rp value, measuring 0.452 Ω·cm² at 750 °C, was the lowest for LNF-GDC composite cathodes with three layers and gradient changes in composition between ScSZ and LNF (Cathode C),, whereas the Rp value of 70%LNF-30%GDC composite …

Surface Structure And Electrochemical Performance Of Zno Coated Lini1/3Co1/3Mn1/3O2, Chang-Wei Liu, Yu Wang, Yu-Zhong Guo, Lu-Lu Dan, Jian-Hua Wang

Journal of Electrochemistry

The surface of LiNi_1/3Co_1/3Mn_1/3O₂ particles were modified by ZnO. Surface structure and electrochemical properties of the coated materials were investigated by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and electrochemical tests. The results show that a ZnO coating affects the surface composition of LiNi_1/3Co_1/3Mn_1/3O₂ particles. The surface contents of nickel and manganese increase with the amount of ZnO coating. ZnO can react with LiNi_1/3Co_1/3Mn_1/3O₂ and a complex oxide is formed during the heat-treatment at above 400 ^oC. The …

Study On Carbon Supported Pd Catalysts Modified By Phosphomolybdic Acid For H2O2 Electrocatalytic Reduction, Li-Mei Sun, Cheng Zhang, Ying-Rong Bao, Hong-Xia Li

Journal of Electrochemistry

The Pd/C catalyst was prepared with the chemical reduction method, and phosphomolybdic acid (PMA) was modified on the Pd/C catalyst using the dipping method. The compositions and structures of the Pd/C and Pd/C modified by phosphomolybdic acid (PMA-Pd/C) catalysts were characterized with X-ray diffraction and Fourier Transform infrared spectroscopy analyses. The electrocatalytic activity and stability of the catalysts for the reduction of hydrogen peroxide (H₂O₂) were studied using cyclic voltammetry and chronoamperometry. The results showed that the phosphomolybdic acid was tightly fixed on the surface of Pd/C catalyst through the chemical interaction. The eletrocatalytic activity of …

Preparation Of Pd/Tio2/C Catalyst And Its Electrocatalytic Performance In Basic Solution For Ethanol Oxidation, Qiao-Xia Li, Yi-Chao Yang, Ming-Shuang Liu, Hong-Min Mao, Qun-Jie Xu

Journal of Electrochemistry

Nanoparticles TiO₂ were prepared by hydrothermal method using precursor tetrabutyl titanate. The Pd/TiO₂/C catalyst was synthesized by liquid phase reducing method supported on nano TiO₂ and Vulcan carbon XC-72. The Pd/TiO₂/C catalyst was characterized by XRD, TEM, cyclic voltammetry, and chronopotentiometry. XRD confirmed the face-centered cubic structure of Pd particles, and TEM indicated that Pd particles (size 3 ~ 4 nm) dispersed uniformly on TiO₂ and carbon XC-72. The results from cyclic voltammogram and chronopotentiogram showed the higher ethanol oxidation activity and stability of Pd/TiO₂/C catalyst (20% Pd) as compared with …

Design And Development Of A Novel Glucose Biosensor Based On The Ferrocene-Functionalized Fe3O4 Nanoparticles/Carbon Nanotubes/Chitosan Nanocomposite Film Modified Electrode, Hua-Ping Peng, Dai-Jun Zha, Wei Chen, Ai-Lin Liu, Xin-Hua Lin

Journal of Electrochemistry

A novel platform for the fabrication of glucose biosensor was successfully constructed by entrapping glucose oxidase (GOD) in a ferrocene monocarboxylic acid-aminated Fe₃O₄ magnetic nanoparticles conjugate (FMC-AFNPs)/chitosan (CS)/multiwall carbon nanotubes (MWNTs) nanocomposite. The formation of FMC-AFNPs could effectively prevent the leakage of ferrocene and retain its electrochemical activity. This GOD/FMC-AFNPs/CS/MWNTs matrix provided a biocompatible microenvironment for retaining the native activity of the immobilized GOD. Moreover, the presence of MWNTs enhanced the charge-transport properties of the composite and facilitated electron transfer between the GOD and the electrode for the electrocatalysis of glucose. Under the optimal conditions the designed …

A New Nonenzymatic Glucose Sensor Based On The Cuo Nanoplatelets, Yan-Cai Li, Fu-Ying Huang, Shun-Xing Li, Jie Chen, Shu-Qing Feng, Fei Wang

Journal of Electrochemistry

The CuO nanoplatelets were synthesized by hydrothermal method. The structure and morphology of the CuO nanoplatelets were characterized by TEM and XRD. A new nonenzymatic glucose sensor was constructed by immobilizing the CuO nanoplatelets on glassy carbon electrode with Nafion. The electrochemical performance of the CuO/Nafion/GCE for the detection of glucose was investigated by cyclic voltammetry and current-time curve. The experiment results showed that the linear dependence of the sensor was 0.01 to 0.3 mmol·L^-1 for glucose with a sensitivity of 1783.58 μA·mmol^-1·L·cm^-2, and the detection limit of the sensor was 0.80 μmol·L^-1 (S/N …

Preliminary Study On Morphology Controllability Of Electrochemically Prepared Polyaniline By Using Aniline Aimer, Yang Zuo, Kang Shi

Journal of Electrochemistry

Employing of aniline dimer (N-phenyl-p-phenylenediamine, NPD) as the starting monomer, polyaniline was electrochemically synthesized on the surface of glassy carbon electrode in acetonitrile-aqueous mixing solutions（20% by volume）containing 1 mol·L^-1 HClO₄. Experimental results demonstrated that the polymerization of NPD occurs at the potentials about 0.2 V lower than those of aniline monomer. Furthermore, the resulting polyaniline has higher morphology controllability than those synthesized by using aniline as the stating monomer. The uniform polyaniline nanoparticles (30 nm in diameter), ultralong nanowires (length > 5 μm, 50 nm in diameter) or large area nanosheets (4 μm in length, 2 μm in …

Electrochemical Oxidation Of Ammonium Nitrite In Absorption Solution Of Flue Gas, Yong-Hong Lu, Xiao-Bo Dong, Li-Sha Wang, Yan Liu, Chen-Jian Zhu, Hai-Bo Xu

Journal of Electrochemistry

In order to make full uses of ammonium nitrite in absorption solution from flue gas simultaneous desulfurization, denitrification and demercurization processes, here the electrochemical oxidation method was used to transform ammonium nitrite into ammonium nitrate. By using polarization curve, cyclic voltammogram and galvanostatic methods, suitable electrode materials were evaluated and chosen. The influence of electrolyte composition was discussed and the appropriate process parameters were obtained. Finally, the effect of electrochemical oxidation was confirmed by chemical analysis method. In 0.05 mol·L^-1 NaNO₂ + 0.05 mol·L^-1 (NH₄)₂SO₄ simulated absorption solution (5 L, pH = …

Student Mentoring In Research: Laser-Activated Drug Delivery To Cancer Cells, William G. Pitt

Journal of Undergraduate Research

Summary of Scope of Proposal This proposal was submitted in October of 2011 to organize and fund a mentoring group in the Pitt lab in Chemical Engineering. Marjan Javadi, then a PhD candidate in Chemical Engineering, and 5 uldergraduate students participated in this research group. The purpose was 2-­‐fold, both scientific and pedagogical. On the scientific side, Marjan was working on her PhD research to develop a novel drug delivery system called an eLiposome that encapsulated a drug along with a nanoemulsion that turns from liquid to gas upon exposure to ultrasound. The ultrasound can be non-­‐invasively (no surgery or …

Condition Assessment Of Concrete Bridge Decks: Sampling And Testing Of Decommissioned Bridges On Interstate 15 In Utah, W. Spencer Guthrie, Brian A. Mazzeo

Journal of Undergraduate Research

The objectives of this research were to obtain samples of four decommissioned concrete bridge decks that were replaced as part of the Interstate 15 (I-15) CORE project in Utah County and evaluate their condition using both non-destructive and destructive testing techniques. Because the decks were not returned to trafficking, extensive destructive testing could be performed. The testing was important for providing information about long-term deterioration mechanisms that occur in Utah bridge decks. Furthermore, because each of the sampled decks had been surfaced with an asphalt membrane-overlay system, testing the decks provided useful information about the efficacy of this rehabilitation approach …

Integrated Composite Reinforcement And Passive Damping Of Plywood Panels, Keith Steurer, Dr. Fernando Fonseca

Journal of Undergraduate Research

Composite reinforced plywood can be used in lightweight structures as well as high performance sporting equipment such as skis, skateboards and snowboards. Composite skins are adhered to the wood core to increase the stiffness of the plywood with very little addition in weight. The possibility exists to use a viscoelastic damping layer as the adhesive to increase adhesion strength between the composite skins and the plywood and create passive constrained layer damping in the composite reinforced plywood. This research investigated the damping performance of composite reinforced plywood using a viscoelastic adhesive.

Development Of A Method Of Obtaining Fluid Temperature Measurements Using A Laser, Scott L. Thomson, Dr. Dan Maynes

Journal of Undergraduate Research

Developing a method of measuring fluid temperature using a laser-based system was the goal of this research project. The following paragraphs summarize the research procedure, results, and plans for future development.