Engineering Commons^™

Establishment Of Effective Metamodels For Seakeeping Performance In Multidisciplinary Ship Design Optimization, Dongqin Li, Philip A Wilson, Xin Zhao

Journal of Marine Science and Technology–Taiwan

Ship design is a complex multidisciplinary optimization process to determine configuration variables that satisfy a set of mission requirements. Unfortunately, high fidelity commercial software for the ship performance estimation such as Computational Fluid Dynamics (CFD) and Finite Element Analysis (FEA) is computationally expensive and time consuming to execute and deters the ship designer’s ability to explore larger range of optimization solutions. In this paper, the Latin Hypercube Design was used to select the sample data for covering the design space. The percentage of downtime, a comprehensive seakeeping evaluation index, was also used to evaluate the seakeeping performance within the short-term …

Evaluation Of Penetration Depth And Protective Effectiveness Of Concrete-Penetrating Sealer Materials, Sung-Ching Chen, Ran Huang, Hui-Mi Hsu, Si-Yu Zou, Li-Wei Teng

Journal of Marine Science and Technology–Taiwan

Crystal penetrating sealer materials (PSMs) are commonly used on the surface of concrete to protect the surface from damage and thereby extend its service life. Such materials penetrate into existing pores or cracks and form crystals, which block potential paths through which unknown materials could enter and degrade the concrete. In this study, the constituent compounds of a PSM were divided into seven categories, labeled CAT I to CAT VII, and five discrete particle size fractions corresponding to sieve Nos. 30, 50, 100, 200, and 200 were considered. Energy dispersive spectrometry revealed that the constituent elements of the PSM were …

Mems Based Tracking Devices For Measuring Distribution Hazards On The Product And Package, Changfeng Ge, Tom Oh, Daniel Johnson, Anthonio Mondragon, Kai Lei

Journal of Applied Packaging Research

This paper introduces two microelectromechanical systems (MEMS) based working data logger prototypes and the cloud based data analysis system that were trademarked and patented as Pak-Track^TM-I and Pak-Track^TM-II. The Pak-Track^TM-I is designed to wirelessly record and report information in real time about individually packaged products during transit. The system allows the user to immediately view the data with a Global Positioning System (GPS) location via a secured website or Android tablet or smart phone. The Pak-Track^TM-II is a standalone device that stores all measurements on internal memory without communicating over a network. …

Effect Of Packaging Material On Color Properties Of Catsup Tomato Sauce, Naser Kohan-Nia, Babak Pakbin, Razzagh Mahmoudi, Omid Fakhri

Journal of Applied Packaging Research

Catsup and tomato sauce products currently are one of the most popular and commercially available table sauces particularly consumed by young people and families around the world in recent decades. In this study colorimetric properties of catsup sauce samples including L*, a* and b* values in different packaging materials including PP, PE, PET, Glass and Sachet have been investigated during and after 180 days storage time at 22̊ C (environmental temperature). Hunter Lab system has been used to evaluate the color values of sauce samples. According to obtained results of experimental measurements and sensory evaluations, PP and PE packaging materials …

Decision Making Framework Using Probabilistic Pareto For Sustainable Packaging Life Cycle Assessment, Euihark Lee, Huihui Qi, Hae Chang Gea

Journal of Applied Packaging Research

The Packaging industry is one of the largest industries in the world and is associated with many environmental concerns. To reduce its environmental impacts, designing sustainable packaging has been one of the top priorities in packaging industries. A common tools for evaluating the environmental impact of a package design is the Life Cycle Assessment (LCA) which provides information on environmental impacts for different indicators. However, making decisions based on the LCA results leaves us with major challenges. First, the LCA tools should consider various uncertainties such as measurement and data quality. Second, the LCA may give conflicting results on different …

Application Of Kansei Engineering To Tactile Sense In The Thai Food Wrapping Materials, Chaiwat Kittidecha, Ashuboda Chandrajith Marasinghe, Yamada Koichi

Journal of Applied Packaging Research

The paper investigates tactile attributes of food wrapping materials in Thailand based on Kansei Engineering and finds that 1) there are two major Kansei dimensions in tactile sense of food wrapping materials, 2) the emotion of "like" constitutes one of the two dimensions both with "smooth" and "natural", and 3) the most favorable wrapping material for Thai is "plastic foam" among nine different wrapping materials; plastic bag, aluminum foil, plastic film, paper, banana leaf, wax paper, plastic net, plastic air bubble and plastic foam. The study was conducted through a questionnaire that asked 6 pairs of emotions about samples; dislike …

New Chair In Engineering & Computer Science: Kwon Is First Female Chair Of Department, Alixandria Reiner

Andrews Agenda: Campus News

No abstract provided.

Section Abstracts: Biomedical And General Engineering

Virginia Journal of Science

Abstracts of the Biomedical and General Engineering Section for the 94th Annual Virginia Academy of Science Meeting, May 18-20, 2016, at University of Mary Washington, Fredericksburg, VA.

The Professional Constructor, Full Issue, Volume 40, Number 01

The Professional Constructor

No abstract provided.

Thermal Properties, Crystallinity, And Oxygen Permeability Of Na-Montmorillonite Reinforced Plasticized Poly(Lactic Acid) Film, Kurniawan Yuniarto, Yohanes Aris Purwanto, Setyo Purwanto, Bruce A. Welt, Hadi Karia Purwadaria, Titi Candra Sunarti

Makara Journal of Technology

Introducing unmodified organically clay/Na-montmorillonite (Na-MMT) was applied into plasticized poly(lactic acid) PLA to produce film composites by direct casting. Film composite structure, the crystallinity degree and form, and thermal properties were carried out using X-ray diffraction and differential scanning calorimetry. The effect of Na- MMT to the tortuous path and the crystallinity degree in the plasticized film composites were calculated in oxygen barrier properties. Chromatogram film composites resulted in an intercalated structure that showed peak diffraction angle shift at about 0.2o. Then, a peak diffraction pattern was indicated in α-form crystal structure. Plasticized PLA has a crystallinity degree at 34%, …

Residual Strength Analysisof Asymmetrically Damaged Ship Hull Girderusing Beam Finite Element Method, Muhammad Zubair Muis Alie

Makara Journal of Technology

The objective of the present study is to analyze the residual strength of asymmetrically damaged ship hull girder under longitudinal bending. Beam Finite Element Method is used for the assessment of the residual strength of two single hull bulk carriers (Ship B1 and Ship B4) and a three-cargo-hold model of a single-side Panamax Bulk Carrier in hogging and sagging conditions. The Smith’s method is adopted and implemented into Beam Finite Element Method. An efficient solution procedure is applied; i.e. by assuming the cross section remains plane, the vertical bending moment is applied to the cross section and three-cargo-hold model. As …

Discrete Power Control In Heterogenous Networks, Yuanyuan Wang, Wibowo Hardjawana, Branka Vucetic

Makara Journal of Technology

In heterogeneous networks (HetNets) where femtocell base stations (FBSs) are deployed within the radio coverage of macrocell base stations (MBSs) to increase network capacity, co-channel interference limits overall system performance with universal frequency reuse. This paper investigates new distributed downlink discrete power control scheme for FBSs in HetNets with FBSs cooperation. The objective of the proposed power control scheme is to maximize the number of simultaneous FBSs transmissions in a single transmission wireless channel where each FBS is allowed to transmit only if the signal-to-interference-noise ratio (SINR) requirements for both FBSs and MBS users are satisfied. We apply a stochastic …

Multi-Project Scheduling Cost Optimization In A Machine Manufacturer Engineer-To-Order, Farizal Farizal, Amar Rachman, Tifani Tandean, Sumarsono Sudarto, Katsuhiko Takahashi

Makara Journal of Technology

This paper discusses the utilization of mixed integer linear programming (MILP) model to optimize cost for multiproject scheduling in a machine maker company. The objective is to minimize total project’s penalty cost and labor cost. The model formulated shows how to achieve the objective i.e. whether to use outsourcing or overtime to finish all projects. The model of multi-project scheduling was solved by Branch & Bound algorithm coded in Lingo 14.0 software. The case study shows that if a company wants to minimize lateness, it should use overtime instead of outsourcing, which minimize total lateness of projects by 144 days …

Analysis Of Arm Movement Prediction By Using The Electroencephalography Signal, Reza Darmakusuma, Ary Setijadi Prihatmanto, Adi Indrayanto, Tati Latifah Mengko, Lidwina Ayu Andarini, Achmad Furqon Idrus

Makara Journal of Technology

Various technological approaches have been developed in order to help those people who are unfortunate enough to be afflicted with different types of paralysis which limit them in performing their daily life activities independently. One of the proposed technologies is the Brain-Computer Interface (BCI). The BCI system uses electroencephalography (EEG) which is generated by the subject’s mental activity as input, and converts it into commands. Some previous experiments have shown the capability of the BCI system to predict the movement intention before the actual movement is onset. Thus research has predicted the movement by discriminating between data in the “rest” …

Texture Analysis Using The Neutron Diffraction Method On The Non Standardized Austenitic Steel Process By Machining,Annealing, And Rolling, Tri Hardi Priyanto, Parikin Parikin, Meijuan Li

Makara Journal of Technology

Austenitic steel is one type of stainless steel which is widely used in the industry. Many studies on austenitic stainless steel have been performed to determine the physical properties using various types of equipment and methods. In this study, the neutron diffraction method is used to characterize the materials which have been made from minerals extracted from the mines in Indonesia. The materials consist of a granular ferro-scrap, nickel, ferro-chrome, ferro-manganese, and ferro-silicon added with a little titanium. Characterization of the materials was carried out in three processes, namely: machining, annealing, and rolling. Experimental results obtained from the machining process …

Maneuverability Of Ships With Small Draught In Steady Wind, Daeng Paroka, Andi Haris Muhammad, Syamsul Asri

Makara Journal of Technology

Wind force and moment may force a ship to drastically decrease its speed and use a large drift angle as well as a large rudder angle in order to maintain its course. Ships with a small draught might have more risk in maneuvering to its point of view compared with a ship with a larger draught. This paper discusses maneuverability of a ship with a small draught in steady wind. The effect of wind on ship speed, drift angle, and rudder angle are investigated in a steady state condition. Five different ratios of wind velocity to ship speed from 1.0 …

A Comparison Of American, Norwegian, And Russian Standards In Calculating The Wall Thickness Of Submarine Gas Pipeline, Cindy Dianita, Tatyana Vladimirovna Dmitrieva

Makara Journal of Technology

One of the key issues in the pipeline design is wall thickness calculation. This paper highlights a comparison of wall thickness calculation methods of submarine gas pipeline based on Norwegian Standard (DNV-OS-F101), Indonesian Standard SNI 3474 which refers to American Standard (ASME B31.8), and Russian Standard (VN39-1.9-005-98). A calculation of wall thickness for a submarine gas pipeline in Indonesia (pressure 12 MPa, external diameter 668 mm) gives the results of 18.2 mm (VN39-1.9-005-98), 16 mm (ASME B31.8), and 13.5 mm (DNV-OS-F101).The design formula of hoop stress due to internal pressure is interpreted in different ways for every standard. Only Norwegian …

Hyperloop Dream Team: Students Represent At Spacex Challenge At Texas A&M, Becky St. Clair

Andrews Agenda: Campus News

No abstract provided.

Peer Reviewed Safety Management System (Sms): Collaboration For Continuous Improvement (Literature Review), Michael F. Canders Ph.D. Cfii

International Journal of Aviation, Aeronautics, and Aerospace

Safe operations are essential for organizational success, perhaps no more so than in aviation. A culture of safety can be a leading contributor to an aviation organization’s success but developing such a culture and maintaining it can be very challenging. Collegiate aviation programs provide an exceptional opportunity to teach essential safety culture components to new aviators. A Safety Management System (SMS) is an effective framework to present and reinforce key safety principles and can be effectively tailored for the collegiate aviation flight training environment. Some aviation colleges may have developed a safety program or SMS but sharing and benchmarking the …

Mentored Environment For Isogeometric Analysis, Kevin Tew, Michael Scott

Journal of Undergraduate Research

The mentored environment for isogeometric analysis (IGA) has trained engineering and computer science students to develop isogeometric numerical methods and accompanying software to solve challenging problems in science and engineering. The mentoring environment consisted of:

1. Weekly group meetings where research concepts were discussed, scientific literature was reviewed, and progress was monitored.
2. Pairing of students with a faculty members to develop IGA design-through-analysis methodologies.
3. Preparation of results for peer-reviewed publications.

Intensive Mentoring And Micro-Electronics Research For Students In Engineering (Immerse) 2014, Aaron Hawkins, Stephen Schultz

Journal of Undergraduate Research

The MEG funds used for this projects supported undergraduate students working in the IMMERSE program starting in the Summer of 2014. IMMERSE employed a total of 35 students, with 14 of them being supervised directly by Dr. Aaron Hawkins and Stephen Schultz. The students working for Drs. Hawkins and Schultz were paid hourly wages for their research work from this MEG grant.

Meg Report: Elastic Frames For Earthquake Resistance, Paul Richards

Journal of Undergraduate Research

The topic of the proposal was steel frames with superior elastic energy capacity that will permit buildings to better withstand severe earthquake loading. The anticipated outcomes related to mentoring were: each student researcher would be the lead author on a conference publication, students would present results at a national conference, and each student researcher would be a co-author on a journal article; with the graduate student researcher as a lead author.

High Temperature Electrochemical Engineering And Clean Energy Systems, Brenda L. Garcia-Diaz, Luke Olson, Michael Martinez-Rodriguez, Roderick Fuentes, Hector Colon-Mercado, Josh Gray

Journal of the South Carolina Academy of Science

Global power demand is projected to more than double by 2050 and meeting this increased power demand will require maintaining or increasing power output from all existing energy sources while adding a large amount of new capacity. The power sources that have the greatest opportunity to fulfill this demand gap over this time period are clean energy sources including solar and nuclear power. One of the areas of expertise that SRNL has been applying to help with a variety of clean energy technologies is in high temperature electrochemistry. Savannah River National Laboratory (SRNL) in collaboration with industrial and university partners …

Increasing The Capacities Of Cable Cars For Use In Public Transport, Sergej Težak, Drago Sever, Marjan Lep

Journal of Public Transportation

This paper examines the advantages and disadvantages of cable cars in public transport within urban areas. The advantages of cable car transport compared to other modes of transport are its quiet operation with an environmentally-acceptable electric drive and the possibility of transporting passengers above the ground, which can provide additional transport dimensions within urban centers. However, cable cars have some disadvantages, especially their smaller capacities in relation to other modes of transport within the urban environment. Today's built cable cars have capacities up to 2,000 persons/h for aerial tramways (or jig-back ropeways) and up to 4,000 persons/h for gondolas.

Solutions …

Willingness To Use A Public Bicycle System: An Example In Nanjing City, Peiyu Feng, Wenquan Li

Journal of Public Transportation

The purpose of this paper is to examine the influence factors on willingness to use a public bicycle system and to analyze the impact of each. Ordered Logit and Probit models were used to analyze the change in user willingness after improvements were made. Data were collected from a random survey conducted in September and October 2014 in Nanjing, China. The findings of this research indicate seven factors that most influence willingness to use a public bicycle system, including socioeconomic factors and journey restrictions. Socioeconomic factors (gender, employment, and car ownership) have more impact on user willingness than journey restrictions. …

The Effects Of Access And Accessibility On Public Transport Users’ Attitudes, Subeh Chowdhury, Kasey Zhai, Asif Khan

Journal of Public Transportation

This study investigates existing users’ attitudes towards public transport from two perspectives. First, the effects of accessibility to various destinations and ease of access to terminals on public transport users’ attitudes are determined. Second, the contribution of social norm, as an information source, in the formation of users’ attitudes is assessed. A user-preference survey was undertaken in Auckland, New Zealand, at two terminals. Data were analyzed using ordinal and logistic regression models. Findings showed that residential density and quality of the built environment, particularly safety, have an effect on the number of pedestrians who access a terminal. Accessibility to various …

Construction Industry Professionals Perception Of Project Management Certification In The Houston Texas Region, Lana K. Coble, Margaret D. Watson

The Professional Constructor

Individual construction design professionals are evaluated on their abilities by state licensing boards in all 50 states of North America. The construction industry has relied upon construction company licenses in 42% of the United States to ensure that buildings are constructed to local area codes. Current practices have created a credibility gap when comparing construction managers to design professionals. Only since the 1970s, have third party agencies led an effort to provide construction management professionals with a certification to establish baseline competencies. To date, research on construction manager certification has been minimal; therefore, this research attempts to contribute to needed …

Measuring Organizational Learning Success In Commercial Construction During Economic Recession, Evan Danforth, Justin Weidman, Clifton Farnsworth

The Professional Constructor

The method through which organizations collect and internalize knowledge, termed organizational learning, has been theorized to significantly influence company performance. Specifically, the speed and accuracy of knowledge transfer boasted by organizational learning proponents is thought to assist companies in dealing with, and even benefiting from, environmental changes such as economic volatility. This research studied the organizational learning of fifteen commercial construction companies in the southwestern United States during the 2008-2009 U.S. recession through semi-structured interviews. It was found that the companies that exhibited dramatically higher or lower levels of organizational learning generally experienced correspondingly higher or lower performance. The contribution …

Strategies For Reducing The Environmental Impacts Of Construction “Improving Erosion And Sedimentation Control Practices On Construction Projects”, Richard Pate Jr

The Professional Constructor

There are numerous potential impacts associated with constructing our built environment; one in particular is fresh on contractor’s minds around the country and that is the erosion and sedimentation of our waterways. In this essay, I explain why this issue has become such a pivotal discussion within construction and green building efforts, what strategies have recently become available for addressing these issues, and how their implementation will affect a project’s overall budget and schedule. The strategies I have chosen to discuss are silt fence tieback systems, polyacrylamide (PAM) flocculants, and unmanned aerial vehicle inspections.

Strategies For Reducing The Environmental Impacts Of Construction, Alex Stewar

The Professional Constructor

In order to carry out a successful and sustainable construction project, quality project planning isessential. In this paper, I will discuss how design and preconstruction are the most important parts of a sustainableconstruction project. The three main points will be about the importance of selling sustainability to the owner, choosingthe proper project delivery method to integrate team members, and planning for the future when designing the project.Finally, I will touch on how my own education through the Construction Science and Management program at ClemsonUniversity has prepared me for this new era of construction.