Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Journal

Discipline
Institution
Keyword
Publication Year
Publication
File Type

Articles 1591 - 1620 of 27333

Full-Text Articles in Engineering

Evaluating Sediment Control Strategies Using Swat Based Bmp Assessment In A Tropical Highland Watershed, Northern Thailand, ฺBanchongsak Faksomboon, Wilailak Suanmali Jan 2026

Evaluating Sediment Control Strategies Using Swat Based Bmp Assessment In A Tropical Highland Watershed, Northern Thailand, ฺBanchongsak Faksomboon, Wilailak Suanmali

Applied Environmental Research

Soil erosion remains a critical environmental challenge in the tropical highland watersheds of Southeast Asia, where steep terrain, intense monsoonal rainfall, and intensive land use interact to accelerate sediment generation and downstream degradation. This study aims to quantify spatial patterns of sediment yield and to systematically evaluate the effectiveness of individual and combined best management practices (BMPs) at both the watershed and subwatershed (SWW) scales using the Soil and Water Assessment Tool (SWAT) in a tropical highland watershed in northern Thailand. Baseline simulations reveal pronounced spatial heterogeneity in erosion severity, with substantial portions of the watershed exhibiting moderate to extreme …

Go to article

Application Of Diatom Indices To Monitor Environmental Shifts In The Downstream Tuntang River, Central Java, Mirza Hanif Al Falah, Tri Retnaningsih Soeprobowati, Hadiyanto -, Muhammad Isnaini Ibnu Sabil, Marta Wojewódka-Przybył, Łukasz Kruszewski, Paweł Rydelek Jan 2026

Application Of Diatom Indices To Monitor Environmental Shifts In The Downstream Tuntang River, Central Java, Mirza Hanif Al Falah, Tri Retnaningsih Soeprobowati, Hadiyanto -, Muhammad Isnaini Ibnu Sabil, Marta Wojewódka-Przybył, Łukasz Kruszewski, Paweł Rydelek

Applied Environmental Research

Diatoms are widely recognized as sensitive bioindicators for reconstructing past water quality and ecological changes in aquatic ecosystems. In this study, multiple diatom-based indices were applied to sediment cores collected from three downstream stations of the Tuntang River, Central Java, to infer long-term environmental change in a tropical river system. A total of 38 sediment subsamples were analyzed, with dominant taxa including Fragilaria crotonensis (2.4–18.6%), Nitzschia palea (3.1–22.4%), and Aulacoseira granulata (2.0–15.8%), indicating sustained nutrient enrichment. Diatom indices consistently classified conditions as mesotrophic to eutrophic throughout the sediment profiles. The occurrence of the marine diatom Cylindrotheca closterium (up to 6.3%) …

Go to article

Exploring Consumers’ Intention And Behavior In The Circular Economy : Evidence From Vietnam, Tuan Hoang Nguyen, Vo Minh Thang Phan Jan 2026

Exploring Consumers’ Intention And Behavior In The Circular Economy : Evidence From Vietnam, Tuan Hoang Nguyen, Vo Minh Thang Phan

Applied Environmental Research

This study aims to address the key gaps in understanding the factors influencing the intention–behavior relationship of consumers in the context of the circular economy (CE). Grounded in the theory of planned behavior (TPB), this research extends the framework by integrating social pressure, attitudes toward green consumption, and the availability of CE products as crucial components that shape intention and behavior. Data were collected from 603 Vietnamese consumers and analyzed using partial least squares structural equation modeling (PLS-SEM). The results confirm the core TPB constructs, with perceived behavioral control emerging as the most influential factor. Notably, attitude toward green consumption …

Go to article

Sustainable Approach For The Removal Of Cu(Ii) From Aqueous Solutions Using Lotus Seedpod-Alginate Composite Biosorbents, Lan Tran-Nguyen, Hue Tran Nguyen-Le, Hong T Hi Anh Nguyen, Tran Nguyen-Phuong-Dung, Ly Kim-Phung, Huynh Quoc-Khanh, Nguyen Minh-Nhut, Phuong Lan Tran-Nguyen Jan 2026

Sustainable Approach For The Removal Of Cu(Ii) From Aqueous Solutions Using Lotus Seedpod-Alginate Composite Biosorbents, Lan Tran-Nguyen, Hue Tran Nguyen-Le, Hong T Hi Anh Nguyen, Tran Nguyen-Phuong-Dung, Ly Kim-Phung, Huynh Quoc-Khanh, Nguyen Minh-Nhut, Phuong Lan Tran-Nguyen

Applied Environmental Research

Turning waste or agricultural byproducts into valuable products has recently become a concern of scientists. In this study, the facile and cost-effective synthesis of a biocomposite derived from lotus seedpod (LS) and alginate (AG) was further applied for Cu2+ ion uptake from aqueous solutions. SEM images revealed the layered structures of the composites, which were thin and irregularly stacked sheets of a complex 3D network. The abundant functional groups on the surface of the LS-based material and its negative zeta potential value of -37.50 mV also facilitated efficient Cu2+ removal. Adsorption results revealed a Cu2+ adsorption efficiency (AE) and experimental …

Go to article

Environmental Sustainability Performance And Efficiency In Thailand’S Rajabhat Universities : A Cross-Regional Analysis Of The Impact Rankings, Konstantinos Balis Jan 2026

Environmental Sustainability Performance And Efficiency In Thailand’S Rajabhat Universities : A Cross-Regional Analysis Of The Impact Rankings, Konstantinos Balis

Applied Environmental Research

Higher education institutions (HEIs) are expected to increasingly communicate their contributions to the United Nations’ Sustainable Development Goals (SDGs), with the rise of alternative sustainability rankings serving as prominent reporting instruments for institutional transparency. In Thailand, Rajabhat Universities, a network of government HEIs historically associated with their mission of teacher training and local development, have been actively participating in the Times Higher Education (THE) Impact Rankings, presenting a unique case study to explore cross-regional sustainability efforts in relation to global benchmarks. To evaluate trends, regional disparities, and engagement performance across the sustainability pillars, this study uses a descriptive quantitative design …

Go to article

Tree Composition And Carbon Sequestration Potential Of A University Campus In Bangkok, Thailand, Chaiwat Boonpeng, Pawanrat Butrid Butrid, Marisa Pischom, Satatip Noikrad Jan 2026

Tree Composition And Carbon Sequestration Potential Of A University Campus In Bangkok, Thailand, Chaiwat Boonpeng, Pawanrat Butrid Butrid, Marisa Pischom, Satatip Noikrad

Applied Environmental Research

Trees play important roles in atmospheric carbon dioxide (CO2) absorption and climate change mitigation. The objective of this study was to assess tree characteristics and carbon sequestration potential at Ramkhamhaeng University (Hua Mak Campus), Bangkok, Thailand. Tree attributes, including species composition, abundance, diameter at breast height (DBH), and tree height, were recorded. Tree biomass, carbon storage, and CO2 sequestration were estimated using appropriate allometric equations. A total of 2,149 trees were recorded in the study area, corresponding to a tree density of 45.8 trees ha-1. The tree community was dominated by the palm family (Arecaceae), while Terminalia ivorensis was the …

Go to article

Development Of A Deep Neural Network Model To Predict Pm2.5 Concentrations Based On Key Factors Affecting Air Pollution In Bangkok, Natsuda Klinklan, Tanawut Poothong, Nuttiwut Areeratphitak, Viganda Varabuntoonvit Jan 2026

Development Of A Deep Neural Network Model To Predict Pm2.5 Concentrations Based On Key Factors Affecting Air Pollution In Bangkok, Natsuda Klinklan, Tanawut Poothong, Nuttiwut Areeratphitak, Viganda Varabuntoonvit

Applied Environmental Research

PM2.5 is a significant air pollution concern in Thailand, particularly in urban areas such as Bangkok, where the 24-hour average concentration frequently exceeds national ambient air quality standards during severe seasonal episodes. Road transportation is the primary source of PM2.5 in Bangkok, accounting for 73% of total emissions, according to the Pollution Control Department. In this study, a predictive modeling framework is developed to investigate the relationship between vehicle count and the mass concentration of PM2.5 from vehicular exhaust emissions. Convolutional neural networks (CNNs) and recurrent neural networks (RNNs) are employed for vehicle detection and counting, whereas a long short-term …

Go to article

Weekly Spatiotemporal Dynamics Of Forest Fire Hotspots In Tak Province, Thailand : A Gis-Based Directional Analysis, Suphatphong Ruthamnong Jan 2026

Weekly Spatiotemporal Dynamics Of Forest Fire Hotspots In Tak Province, Thailand : A Gis-Based Directional Analysis, Suphatphong Ruthamnong

Applied Environmental Research

Forest fires are recurrent dry-season hazards in northern and western Thailand, yet their short-term spatial dynamics remain insufficiently understood. In this study, weekly spatiotemporal dynamics of forest fire hotspots in Tak Province, Thailand, were examined using Visible Infrared Imaging Radiometer Suite (VIIRS) active-fire data and GIS-based directional analysis. Hotspots from five fire seasons (2021–2025) were grouped into 24 weekly intervals beginning on 1 December. The analysis integrated weekly hotspot counts, forest-type compositions, mean-center trajectories, standard deviational ellipses, temporal changes in topographic characteristics, and fishnet-based hotspot persistence mapping. The results revealed that fire activity was highly concentrated during the middle of …

Go to article

Initial Screening Of Halophilic Plastic-Degrading Bacteria From Mangrove Water And Sediment In Pekalongan, Indonesia, Novia Safinatunnajah, Muhammad Zainuri, Aris Ismanto, Tony Hadibarata, Kunarso -, Sugeng Widada, Hermin Pancasakti Kusumaningrum, Candra Wahyuningsih Jan 2026

Initial Screening Of Halophilic Plastic-Degrading Bacteria From Mangrove Water And Sediment In Pekalongan, Indonesia, Novia Safinatunnajah, Muhammad Zainuri, Aris Ismanto, Tony Hadibarata, Kunarso -, Sugeng Widada, Hermin Pancasakti Kusumaningrum, Candra Wahyuningsih

Applied Environmental Research

Microplastic pollution in tropical mangrove ecosystems represents an increasing environmental concern, particularly in coastal regions such as Pekalongan, Indonesia, where industrial and residential activities contribute substantially to plastic waste. This study aimed to isolate and preliminarily screen halophilic bacteria from mangrove sediments and seawater collected from a plastic-impacted coastal area. Using mineral salt medium (MSM) supplemented with polyethylene glycol (PEG), six bacterial strains were obtained and evaluated for their potential to interact with polyethylene (PE) and polypropylene (PP) on the basis of gravimetric weight loss measurements. Among the isolates, Halomonas Cupida A1, Marinobacter nauticus A6.3, and Marinobacter nauticus SD5.2 exhibited …

Go to article

Effects Of The Psb-To-Ow Ratio And Light Intensity On Biogas Composition During Phototrophic-Assisted Anaerobic Fermentation Of Organic Waste, Kridsana Jirasansawat, Sirilak Prasertkulsak, Nitiwist Teangthai Jan 2026

Effects Of The Psb-To-Ow Ratio And Light Intensity On Biogas Composition During Phototrophic-Assisted Anaerobic Fermentation Of Organic Waste, Kridsana Jirasansawat, Sirilak Prasertkulsak, Nitiwist Teangthai

Applied Environmental Research

The integration of phototrophic processes into anaerobic fermentation offers a promising strategy for improving biogas quality; however, the combined effects of the photosynthetic bacteria-to-organic waste (PSB-to-OW) ratio and light intensity remain unclear. In this study, the photosynthetic bacteria (PSB)-assisted anaerobic fermentation of municipal organic waste under varying PSB-to-OW ratios and light intensities was evaluated. An optimal PSB-to-OW ratio of 1:2 resulted in significantly higher CH4 concentrations and lower CO2 and H2S concentrations than the other tested ratios did (p < 0.05). At this ratio, moderate illumination (2000 lx) resulted in the highest CH4 concentration (68.2 ± 0.3%), compared with 1000 lx (61.5 ± 0.4%) and 4000 lx (63.1 ± 0.5%). Under illumination, the CO2 and H2S concentrations were lower than those under dark conditions, indicating a more favorable biogas composition. Kinetic analysis indicated that CO2 and H2S exhibited apparent first-order behavior under illumination, with the highest rates occurring at 2000 lx (kH2S = 0.093 day-1; kCO2 = 0.059 day-1), suggesting light-dependent transformation processes. Metagenomic analysis revealed a microbial community dominated by sulfide-oxidizing (Chlorobium sp.), photoheterotrophic (Rhodopseudomonas sp.), and syntrophic bacteria, supporting coupled carbon conversion and sulfur transformation. Overall, optimization of the …

Go to article

Metal–Organic Frameworks : Opportunities And Challenges In Nutrient Recovery, Suchana Amnuaychaichana, Chi-Wang Li, Pongsak (Lek) Noophan, Sumeth Wongkiew Jan 2026

Metal–Organic Frameworks : Opportunities And Challenges In Nutrient Recovery, Suchana Amnuaychaichana, Chi-Wang Li, Pongsak (Lek) Noophan, Sumeth Wongkiew

Applied Environmental Research

Nutrient recovery from waste streams is a critical strategy for promoting sustainable agriculture and mitigating environmental degradation. Essential nutrients commonly present in organic waste and wastewater, such as nitrogen and phosphorus, can be reclaimed and reintegrated into agricultural systems. Metal‒organic frameworks (MOFs), which are composed of metal clusters coordinated with organic ligands, have emerged as promising materials for adsorption and have the potential for nutrient recovery and pollutant removal because of their high porosity, large surface area, and tunable physicochemical properties. These attributes enable MOFs to serve in diverse applications, including heavy metal adsorption, organic pollutant degradation, and nutrient transformations. …

Go to article

A Review On Biomass-Derived Hard Carbon Anodes For Sodium-Ion Batteries : From Carbon Precursors To Storage Mechanisms, Anqi Lu, Jiaqian Qin Jan 2026

A Review On Biomass-Derived Hard Carbon Anodes For Sodium-Ion Batteries : From Carbon Precursors To Storage Mechanisms, Anqi Lu, Jiaqian Qin

Journal of Metals, Materials and Minerals

The rapid development of sustainable energy technologies has intensified the demand for cost-effective and high-performance energy storage systems. Sodium-ion batteries (SIBs) are regarded as one of the most promising alternatives to lithium-ion batteries (LIBs) owing to their low cost, abundant sodium resources, and similar electrochemical mechanisms to LIBs. Hard carbon (HC) has attracted significant attention as the predominant anode material for SIBs due to its low cost, structural tunability, and availability from diverse precursors. Nevertheless, challenges remain, including the unclear Na+ storage mechanism, limited rate capability, and strong dependence on precursor type. This review systematically summarizes recent advances in HC …

Go to article

Mechanical Properties And Crystallization Of Polybutylene Terephthalate Reinforced With Glass Flakes And Aluminum Powder, Nattakarn Hongsriphan, Pajaera Patanathabutr Jan 2026

Mechanical Properties And Crystallization Of Polybutylene Terephthalate Reinforced With Glass Flakes And Aluminum Powder, Nattakarn Hongsriphan, Pajaera Patanathabutr

Journal of Metals, Materials and Minerals

This research investigated mechanical properties and crystallization of poly(butylene terephthalate) composites by adding glass flakes (GF) and aluminum particles (Al). The concentration of the GF was 3 wt% or 5 wt%, and the Al was 0.5 wt% or 1.0 wt%. The stress-strain curves of the PBT-based composites showed yielding and necking. The PBT/GF/Al composites with GF/Al ratios of 3/0.5 wt/wt%, 3/1.0 wt/wt%, 5/0.5 wt/wt%, and 5/1.0 wt/wt% had Young’s moduli of 11.44%, 11.70%, 16.81%, and 19.31% higher than that of neat PBT, respectively. In the presence of Al at 1.0 wt%, the flexural modulus of the PBT/GF/Al composites increased to …

Go to article

Synthesis, Structure, And Electrochemical Properties Of The Ni(Oh)2/Nimoo4 Composite On The Rgo/Nf Template For Hybrid Battery-Supercapacitor Electrodes, Retno Asih, Haniffudin Nurdiansah, Rogabe Sianipar, Ida Ayu Gayatri, Lukman Noerochim, Diah Susanti, Isao Watanabe, Darminto Darminto Jan 2026

Synthesis, Structure, And Electrochemical Properties Of The Ni(Oh)2/Nimoo4 Composite On The Rgo/Nf Template For Hybrid Battery-Supercapacitor Electrodes, Retno Asih, Haniffudin Nurdiansah, Rogabe Sianipar, Ida Ayu Gayatri, Lukman Noerochim, Diah Susanti, Isao Watanabe, Darminto Darminto

Journal of Metals, Materials and Minerals

The growing demand for renewable and sustainable energy has intensified research on advanced energy-storage systems that can deliver both high energy and power densities. In this study, a Ni(OH)2/ NiMoO4 composite on a reduced graphene oxide/nickel foam (rGO/NF) template was synthesized through a hydrothermal and electrodeposition route to construct a hybrid battery-supercapacitor electrode. The unique hierarchical design combines the pseudocapacitive activity of Ni(OH)2/NiMoO4 with the excellent conductivity of rGO and the high surface area of NF, enabling efficient electron and ion transport. Structural and morphological analyses confirm the successful formation of the Ni(OH)2/NiMoO4/rGO/NF architecture. The electrode exhibits a specific capacitance …

Go to article

Development Of Poly(Lactic Acid)/Ethylene-Propylene-Diene Monomer/Cellulose Composites Using Cellulose Extracted From Hemp Biomass For Plastic Packaging Applications, Supanicha Alapon, Natthanich Thongmee, Wikoramet Teeka, Pattara Somnuake, Sirirat Wacharawichanant Jan 2026

Development Of Poly(Lactic Acid)/Ethylene-Propylene-Diene Monomer/Cellulose Composites Using Cellulose Extracted From Hemp Biomass For Plastic Packaging Applications, Supanicha Alapon, Natthanich Thongmee, Wikoramet Teeka, Pattara Somnuake, Sirirat Wacharawichanant

Journal of Metals, Materials and Minerals

Poly(lactic acid)/ethylene-propylene-diene monomer (EPDM)/cellulose composites using cellulose derived from hemp biomass (CHB) were investigated in this research. Morphology, chemical structures, functional groups, and crystallinity of CHB were characterized, observing a size of 135 ± 32 μm from SEM images with high purity and crystallinity from FT-IR and XRD spectroscopy. The optimized CHB was incorporated at 1 phr, 3 phr, and 5 phr into PLA/EPDM blends at 90/10 w/w. The polymer composites were prepared using an internal mixer, and samples were produced by compression molding for mechanical and thermal testing. The results indicated that the EPDM phase dispersed as droplets in …

Go to article

Effect Of Cu Content On Microstructure, Morphology, And Antibacterial Properties Of Ti-Cu Alloy Thin Films, Chittra Kedkaew, Phalakorn Khwansungnoen, Tanattha Rattana Jan 2026

Effect Of Cu Content On Microstructure, Morphology, And Antibacterial Properties Of Ti-Cu Alloy Thin Films, Chittra Kedkaew, Phalakorn Khwansungnoen, Tanattha Rattana

Journal of Metals, Materials and Minerals

Ti-Cu alloy thin films exhibit considerable potential for the development of advanced antibacterial surfaces, particularly for biomedical applications. In this research, Ti-Cu binary alloy thin films with a wide range of Cu content from 25.8 at% to 77.8 at% were deposited using magnetron co-sputtering with pure Ti and Cu as the targets. The composition of Cu in the films can be controlled by the applied power of Cu targets. This study investigated the effect of Cu content on the microstructural, morphological, and antibacterial properties using X-ray diffraction (XRD), Field emission scanning electron microscopy (FESEM), Atomic force microscopy (AFM), X-ray photoelectron …

Go to article

Contributions Of Carbon Content And Cooling Rate On Phase Transformations And Mechanical Properties Of Sintered Fe-1.5cr-0.2mo-Xc Alloys, Mantana Yaruan, Wantana Koetniyom, Thanyaporn Yotkaew, Nattaya Tosangthum, Ruangdaj Tongsri Jan 2026

Contributions Of Carbon Content And Cooling Rate On Phase Transformations And Mechanical Properties Of Sintered Fe-1.5cr-0.2mo-Xc Alloys, Mantana Yaruan, Wantana Koetniyom, Thanyaporn Yotkaew, Nattaya Tosangthum, Ruangdaj Tongsri

Journal of Metals, Materials and Minerals

Microstructural development in sintered Fe-1.5Cr-0.2Mo-xC alloys, produced under different cooling rates of 0.1℃∙s‒1 and 5.4℃∙s‒1, was investigated. It was found that, in slowly sintered Fe-1.5Cr-0.2Mo-xC alloys, the microstructure changed from hypoeutectoid to eutectoid and to hypereutectoid steel microstructural features with increasing carbon content. Under the fast-cooling rate of 5.4℃∙s‒1, the microstructural change with respect to the increase of carbon content involved the competition between the formation of ferrite + carbide mixture and that of martensite-austenite constituent. The increase of tensile strength of slowly cooled sintered Fe-1.5Cr-0.2Mo-xC alloys with increasing carbon content was attributed to …

Go to article

Effect Of Garnet Incorporation On The Functional Properties Of Sunscreens, Parinya Chakartnarodom, Kanyarat Munmani, Sureerat Polsilapa, Duangrudee Chaysuwan, Wichit Prakaypan, Passakorn Sonprasarn, Edward Laitila, Nuntaporn Kongkajun Jan 2026

Effect Of Garnet Incorporation On The Functional Properties Of Sunscreens, Parinya Chakartnarodom, Kanyarat Munmani, Sureerat Polsilapa, Duangrudee Chaysuwan, Wichit Prakaypan, Passakorn Sonprasarn, Edward Laitila, Nuntaporn Kongkajun

Journal of Metals, Materials and Minerals

Garnet, a silicate mineral, was investigated as a replacement for the TiO2-based compound in sunscreen formulations. Samples containing garnet were evaluated for color shade, viscosity, sun protection factor (SPF), and water resistance. Substituting the TiO2-based compound with garnet reduced both viscosity and SPF but markedly enhanced water resistance. This improvement is attributed to the physical reinforcement provided by garnet particles, which strengthen the sunscreen film and reduce wash-off under water exposure. Garnet incorporation also altered the product’s appearance from white to a darker brownish-beige tone, improving visual compatibility with a wider range of skin tones.

Go to article

Effects Of Welding Currents On Microstructure And Corrosion Behaviors Of Inconel 625 Cladding On 2.25cr-1mo Steel By Hot-Wire Tig, Supparat Saeheng, Hein Zaw Oo, Prapas Muangjunburee Jan 2026

Effects Of Welding Currents On Microstructure And Corrosion Behaviors Of Inconel 625 Cladding On 2.25cr-1mo Steel By Hot-Wire Tig, Supparat Saeheng, Hein Zaw Oo, Prapas Muangjunburee

Journal of Metals, Materials and Minerals

Hot-wire tungsten inert gas (HW-TIG) cladding has been applied to the steam turbine rotor welding repair. This study investigated the effects of welding currents on microstructure, hardness, and corrosion behavior. The experiments were conducted using four different welding currents applied to bead-on-plate Inconel 625 welds on a 2.25Cr-1Mo steel substrate as the steam turbine rotor material. The selected welding currents were 125 A, 150 A, 175 A, and 200 A. The percentages of weld dilution for different welding currents were also evaluated. Higher welding currents increased weld dilution, weld bead width, and HAZ size. As the welding current increased, the …

Go to article

Properties And Printability Of Polylactic Acid Films : An Effect Of Polyglutamate Coated Natto As A Bio-Plasticizer, Natrata Thitinardwong, Thira Chavarnakul, Kawee Srikulkit Jan 2026

Properties And Printability Of Polylactic Acid Films : An Effect Of Polyglutamate Coated Natto As A Bio-Plasticizer, Natrata Thitinardwong, Thira Chavarnakul, Kawee Srikulkit

Journal of Metals, Materials and Minerals

Polylactic acid (PLA) film, a biodegradable alternative to petroleum-based plastics, has gained significant attention for sustainable packaging applications. However, its limited screen-printability remains a barrier to broader commercial use. This study aims to enhance the screen-printability of PLA film by incorporating a polyglutamate coated natto (designated as Nat-M). PLA/Nat-M films having 1%, 3%, and 5% Nat-M were prepared and evaluated for their key performance indicators, including ink adhesion (ASTM D3359), tone reproduction accuracy, and printing resolution. The screen-printing resolution was optimized between 400 DPI and 500 DPI (dots per inch) to achieve optimal tone reproduction and edge sharpness. Additionally, ink …

Go to article

A Top-Electrode-Based Liquid-Solid Triboelectric Nanogenerator For Energy Harvesting And Ethanol Detection, Subrat Bhol, Nakul Charan Sahu, Sunit Gaurav Mohanty, Vicky Raj Maddala, Basanta Kumar Panigrahi, Premkumar Bhosale Jan 2026

A Top-Electrode-Based Liquid-Solid Triboelectric Nanogenerator For Energy Harvesting And Ethanol Detection, Subrat Bhol, Nakul Charan Sahu, Sunit Gaurav Mohanty, Vicky Raj Maddala, Basanta Kumar Panigrahi, Premkumar Bhosale

Journal of Metals, Materials and Minerals

Liquid-solid triboelectric nanogenerators (LS-TENGs) offer a promising avenue for self-powered energy harvesting and sensing by exploiting contact electrification at fluid-dielectric interfaces, where droplet dynamics drive charge separation for electrical output without external power. In this work, a top-electrode LS-TENG was fabricated using a polytetrafluoroethylene (PTFE) film on a PMMA substrate with deionised water droplets, achieving an open-circuit voltage of ‒3.4 V, short-circuit current of 3.6 μA, and peak power of 1.48 nW at 100 MΩ under optimised conditions of 2 cm drop height, 45° tilt, and 50 μL volume. Performance scaled with droplet kinetics and volume due to enhanced contact …

Go to article

Strategic Optimization Of Plasticizers, Fillers, And Blend Ratios For Enhanced Performance Of Dynamically Cured Epoxidized Natural Rubber (Enr)/Polypropylene (Pp) Thermoplastic Vulcanizates, Azizon Kaesaman, Anuwat Worlee, Charoen Nakason Jan 2026

Strategic Optimization Of Plasticizers, Fillers, And Blend Ratios For Enhanced Performance Of Dynamically Cured Epoxidized Natural Rubber (Enr)/Polypropylene (Pp) Thermoplastic Vulcanizates, Azizon Kaesaman, Anuwat Worlee, Charoen Nakason

Journal of Metals, Materials and Minerals

This study introduces an innovative methodology for optimizing oil, plasticizer, filler, and blend proportions in epoxidized natural rubber with 20 mol% epoxide (ENR-20) and polypropylene (PP) thermoplastic vulcanizates (TPVs), aiming to achieve superior rheological, mechanical, morphological, and thermal performance. By leveraging paraffinic oil, epoxidized soybean oil, and phthalate-based plasticizers, the research investigates their influence on tensile strength, elasticity, and processability. Among the oils and plasticizers evaluated, paraffinic oil demonstrated the most effective plasticizing performance, offering superior flexibility and elasticity. Various paraffinic oil loadings (15 phr, 25 phr, 30 phr, 35 phr, 40 phr, 45 phr, 50 phr, and 75 phr) …

Go to article

Impact Of Chromium Substitution On Structural And Magnetic Properties Of Mnbi-Based Melt-Spun Ribbons, Anh Kha Vuong, Triet Minh Dang, Truong Xuan Nguyen, Duy Anh Vo Nguyen, Hai Van Pham, Nam Hoai Nguyen, Nam Hong Pham, Oanh Kim Thi Vuong, Tan Nhut Nguyen Le, Tuan Van Dinh, Nam Thanh Tran Nguyen, Nhan Thi Tran, Trung Quoc Nguyen, Nhan Thi Tran, Trung Quoc Nguyen, Lu Wei, Vuong Van Nguyen Jan 2026

Impact Of Chromium Substitution On Structural And Magnetic Properties Of Mnbi-Based Melt-Spun Ribbons, Anh Kha Vuong, Triet Minh Dang, Truong Xuan Nguyen, Duy Anh Vo Nguyen, Hai Van Pham, Nam Hoai Nguyen, Nam Hong Pham, Oanh Kim Thi Vuong, Tan Nhut Nguyen Le, Tuan Van Dinh, Nam Thanh Tran Nguyen, Nhan Thi Tran, Trung Quoc Nguyen, Nhan Thi Tran, Trung Quoc Nguyen, Lu Wei, Vuong Van Nguyen

Journal of Metals, Materials and Minerals

MnBi-based magnetic materials and magnets are of significant interest due to their magnetism without rare earth elements and their ability to replace Nd-Fe-B in high-temperature magnet applications due to its unique feature of enhancing coercivity in the range of 100℃ to 250℃, enabling their energy product (BH)max comparable to NdFeB magnets despite their moderate spontaneous magnetization Msp. To adjust the magnetic properties of MnBi magnets, various elements have been doped to regulate magnetic interactions among the atoms, which subsequently alters Msp and the magneto-crystalline anisotropy energy. In this work, we investigate the effects of chromium doping on the magnetic properties …

Go to article

Cold Sintering-Assisted Low Temperature Fabrication Of Dense Ba5 Nb4 O15 Ceramics, Usa Sukkha, Apichayaporn Teandam, Phakkhananan Pakawanit, Phitsamai Kamonpha, Wanwilai Vittayakorn, Phieraya Pulphol, Naratip Vittayakorn Jan 2026

Cold Sintering-Assisted Low Temperature Fabrication Of Dense Ba5 Nb4 O15 Ceramics, Usa Sukkha, Apichayaporn Teandam, Phakkhananan Pakawanit, Phitsamai Kamonpha, Wanwilai Vittayakorn, Phieraya Pulphol, Naratip Vittayakorn

Journal of Metals, Materials and Minerals

This study presents a novel approach for fabricating Ba5Nb4O15 (BNO) ceramics at low sintering temperatures via the cold sintering process (CSP), using Ba(OH)2∙8H2O (BOH) as a transient liquid phase. CSP was performed under an external pressure of 10 MPa with a sintering temperature range of 150℃ to 300℃. Optimally, BNO-BOH ceramics achieved a relative density of 93.7 ± 0.43% when sintered at 250℃ for 1 h. Scanning electron microscopy (SEM) suggested that particle densification occurred via a dissolution-precipitation process, which filled pores and formed necks between particles. The study demonstrates that the residual liquid content is crucial for ceramic densification. …

Go to article

Fabrication Of A Chitosan‒Fe3o4/Activated Carbon/Tio2 Nanocomposite As A Pb(Ii) Heavy Metal Adsorbent, Berliantty Warim Putri, Arif Hidayat, Lya Rizka Herawati, Poppy Puspitasari, Nandang Mufti, Yap Wing Fen, Muhammad Safwan Abdul Aziz, Tahta Amrillah, Ahmad Taufiq Jan 2026

Fabrication Of A Chitosan‒Fe3o4/Activated Carbon/Tio2 Nanocomposite As A Pb(Ii) Heavy Metal Adsorbent, Berliantty Warim Putri, Arif Hidayat, Lya Rizka Herawati, Poppy Puspitasari, Nandang Mufti, Yap Wing Fen, Muhammad Safwan Abdul Aziz, Tahta Amrillah, Ahmad Taufiq

Journal of Metals, Materials and Minerals

Nowadays, water pollution by heavy metal Pb(II) is a significant issue in many countries, including Indonesia. To overcome this problem, a suitable and efficient waste treatment method is necessary. Therefore, in this work, Fe3O4/AC/TiO2 nanocomposite modified with chitosan (CS) for the treatment of Pb (II) waste were investigated. CS was used due to its OH and NH2 functional groups, which enable the formation of a new hybrid nanocomposite that can be used repeatedly. To reduce production costs, environmentally friendly, raw natural materials, such as iron sand, coconut shells, and shrimp shells, were employed. The XRD characterization results indicate that the …

Go to article

Advanced Hemp-Based Hybrid Composites: A Study On The Influence Of Various Nanofillers On Mechanical And Morphological Properties, Velmurugan Ganesan, Jasgurpreet Singh Chohan, Muthukumar V., Nagaraj M., Lakshmi Narayana S. Jan 2026

Advanced Hemp-Based Hybrid Composites: A Study On The Influence Of Various Nanofillers On Mechanical And Morphological Properties, Velmurugan Ganesan, Jasgurpreet Singh Chohan, Muthukumar V., Nagaraj M., Lakshmi Narayana S.

Journal of Metals, Materials and Minerals

This study investigates the mechanical and microstructural attributes of epoxy composites with hemp fiber reinforcements and incorporated aluminum oxide (Al2O3), silicon dioxide (SiO2), and magnesium oxide (MgO) nanoparticles at different weight fractions of 0.5 wt%, 1.0 wt%, and 1.5 wt%. Nano-fillers remarkably improved the composite performance, as indicated by tensile and flexural tests conducted by ASTM D3039 and ASTM D790 standards. The composite containing 1.5 wt% Al2O3 outperformed other nano filled composites with a tensile strength of 64 MPa and tensile modulus of 3.6 GPa, versus 52 MPa and 3.0 GPa for the unfilled hemp/epoxy composite. In parallel, flexural strength …

Go to article

Sintering Behavior And Mechanical Properties Of Ha-Ysz-Ti Composite Sintered By Spark Plasma Sintering, Seyed Mohsen Fatemi, Iman Mobasherpour, Leila Nikzad, Mansour Razavi Jan 2026

Sintering Behavior And Mechanical Properties Of Ha-Ysz-Ti Composite Sintered By Spark Plasma Sintering, Seyed Mohsen Fatemi, Iman Mobasherpour, Leila Nikzad, Mansour Razavi

Journal of Metals, Materials and Minerals

This research is aimed to determine the best composition of composite fabricated by Spark Plasma Sintering (SPS) to produce a suitable substituent for bone. The applied powder was prepared by the SPS method and comprises hydroxyapatite (HA), yttria-stabilized zirconia (YSZ), and titanium (Ti). Different percentages of components were used to fabricate the composite samples. X-ray diffraction was used to determine the structural phase of the sintered samples while field emission scanning electron microscopy (FE-SEM) was employed for microstructural analysis of the specimens. The behavior of the samples was investigated during sintering. The gas release, displacements, and porosity percentage of the …

Go to article

Antibacterial Characterization Of Ciprofloxacin-Doped Electrospun Of Low Molecular Weight Polyethylene Oxide (Peo) And Sodium Alginate (Naalg) Nanofibers, Phuphinee Niyomchon, Treesukon Treebupachatsakul, Kasama Srirussamee Jan 2026

Antibacterial Characterization Of Ciprofloxacin-Doped Electrospun Of Low Molecular Weight Polyethylene Oxide (Peo) And Sodium Alginate (Naalg) Nanofibers, Phuphinee Niyomchon, Treesukon Treebupachatsakul, Kasama Srirussamee

Journal of Metals, Materials and Minerals

Producing nanofibers using the electrospinning technique is a developed method that is widely used and of significant interest nowadays. This technique can be applied using various types of polymers. This research aimed to investigate the antibacterial PEO-NaAlg nanofiber fabrication. The fiber fabrication was examined under various viscosities of electrospinning solution. The electrospun nanofiber fabrication focuses on blending polyethylene oxide (PEO) with a molecular weight of 200-300 kDa, mixed with sodium alginate (NaAlg) of three different viscosities: 150 cP, 300 cP, and 730 cP to study how the viscosity of the solution affects the morphology of electrospun nanofibers. The PEO-NaAlg electrospun …

Go to article

Effects Of Various Heat Treatment Cycles On Mechanical Properties And Wear Resistance Of 65mn Carbon Steel, Amir Abbas Mojahedi, Seyed Abdolkarim Sajjadi, Fatemehsadat Sayyedan Jan 2026

Effects Of Various Heat Treatment Cycles On Mechanical Properties And Wear Resistance Of 65mn Carbon Steel, Amir Abbas Mojahedi, Seyed Abdolkarim Sajjadi, Fatemehsadat Sayyedan

Journal of Metals, Materials and Minerals

The aim of the present study is to investigate the effect of various heat treatment cycles on mechanical properties and wear resistance of 65Mn carbon steel. For this purpose, five different heat treatment cycles including normalizing, austenitizing, quenching, and tempering were performed at different austenitization temperatures and tempering times. Subsequently, effects of the parameters on tensile strength, toughness, hardness, and wear resistance of the heat-treated samples were investigated. X-ray diffraction (XRD) and scanning electron microscopy (SEM) equipped with energy dispersive X-ray spectroscopy (EDS) were employed to analyze microstructure of heat-treated samples. To study the wear resistance of the samples after …

Go to article

Two-Step Sputtering For Depositing Smooth And Thin Zno Films On Non-Heated, Non-Epiready Pet Substrates, Nattaya Tajina Yossapong, Annop Klamchuen, Kittipong Tantisantisom, Ekkaphop Ketsombun, Taworn Intaro, Sakuntam Sanorpim, Warakorn Yanwachirakul Jan 2026

Two-Step Sputtering For Depositing Smooth And Thin Zno Films On Non-Heated, Non-Epiready Pet Substrates, Nattaya Tajina Yossapong, Annop Klamchuen, Kittipong Tantisantisom, Ekkaphop Ketsombun, Taworn Intaro, Sakuntam Sanorpim, Warakorn Yanwachirakul

Journal of Metals, Materials and Minerals

Highly crystalline, smooth-surface, and thin zinc oxide (ZnO) films have been successfully deposited on flexible polyethylene terephthalate (PET) substrates using an optimized two-step RF magnetron sputtering technique at ambient temperature. The PET used in this study was a commercially available overhead projector film, which was not epiready-grade and had a lower melting point (~150℃). This issue made high-quality deposition more challenging. In the first step, a thin ZnO buffer layer was deposited at low RF power to provide a smooth and thermally stable surface. This layer served as both a structural template and a thermal barrier during the subsequent high-power …

Go to article

First Prev Next Last