Engineering Commons^™

Mitigation Of Wellbore Instability In Deviated Wells By Using Geomechanical Models And Mpd Technique, Husam Raad Abbood

Masters Theses

"During drilling operations for the E oilfield in the Mishrif formation in southern Iraq, stuck pipe presents a significant wellbore stability problem for deviated wells. In this study, two solutions are utilized to address this problem. The first approach is a 1-D Geomechanical model of the Mishrif formation compiled based on the state of stress and rock strength parameters. It is utilized to assess the contribution of borehole collapse leading to the stuck pipe problems. The results of this study show that wells characterized by stuck pipe are drilled along azimuths which promote wellbore collapse. Three different failure criteria, the …

Protection Of A 138/34.5 Kv Transformer Using Sel 387-6 Relay, Aamani Lakkaraju

Masters Theses

"Schweitzer Engineering laboratories (SEL) donated the SEL 387, SEL 311L, and SEL 351S relays and the SEL AMS to Missouri University of Science and Technology. This thesis documents the demonstration approach to set the SEL 387 relay to protect a grounded wye-grounded wye transformer and then test these settings by injecting fault currents into the relay using the SEL AMS. This thesis explains the approach to set the differential element of the SEL 387 relay to protect a transformer against internal faults and the overcurrent element of the SEL 387 relay to protect transformer against external faults. A radial power …

Behavior Of Hollow-Core Composite Columns Under Torsion Loading, Sujith Anumolu

Masters Theses

"The effect of torsional loads could be significant along with axial and flexural loads on bridge columns during earthquake excitations. The present study presents the torsional behavior of hollow-core steel-concrete-steel columns (HC-SCS) and hollow-core fiber reinforced polymer-concrete-steel columns (HC-FCS). The HC-SCS comprises of sandwiched concrete shell between two steel tubes whereas in HC-FCS column, the outer steel tube of HC-SCS column was replaced by the FRP tube. Both columns have stay-in place permanent form-work to the concrete shell in the form of outer and inner tubes. The steel tubes serve as longitudinal and shear reinforcement to the column. Finite element …

Synthesis Of Radioactive Nanostructures In A Research Nuclear Reactor, Maria Camila Garcia Toro

Masters Theses

In this work, the synthesis of radioactive nanostructures by water radiolysis was studied. The irradiation processes were done in the Missouri University of Science and Technology research nuclear reactor (MSTR).

Radioactive gold nanoparticles (AuNPs) were synthesized from aqueous solutions containing the metal salt precursors by radiolysis of water. Seven different samples were irradiated at 200kW of thermal power for 0.5, 1, 3, 5, 10, 30, and 60 minutes. The average sizes of the obtained nanoparticles ranged from 3 nm to 400 nm, it was found that the particle size decreased with the irradiation time. Some agglomerations of particles were found …

Effect Of Reservoirs Heterogeneity On Injection Pressure And Placement Of Preformed Particle Gel For Conformance Control, Ze Wang

Masters Theses

"Preformed particle gels (PPG) have been successfully applied as a plugging agent for plugging fractures and then divert displacing fluid into poorly swept zones. However, PPG propagation and plugging mechanisms through open fractures have not been studied thoroughly.

This work investigated the influence of some factors (particle size, brine concentration, heterogeneity, and brine salinity) on gel injectivity, plugging performance for water flow through open fractures. Five-foot tubes were used to mimic open fractures. Three models were designed to conduct the work, including (1) single fracture with uniform fracture width, (2) single fracture with different widths, and (3) two parallel fractures …

Material Properties Characterization For Multilayer Pcb And Peec Macromodels For Above Plane Decoupling Capacitors, Xiang Fang

Masters Theses

"Accurate frequency-dependent dielectric properties are important for accurate modelling of signal and power integrity problems. And decoupling capacitors perform an important function in the impedance reduction of power distribution systems. Hence, precise dielectric properties and micromodels for decoupling capacitors are the key parts for the signal and power integrity design.

In Section 1, the existing method for extracting dielectric properties from fabricated multilayer printed circuit boards based on the measured electrical property of fabricated transmission lines is introduced and validated using simulations. And the potential errors in the procedure are discussed. After that Djordjevic-Sarkar causal dielectric model for dielectric properties …

A Comprehensive Study Of Lost Circulation With Application In The South Rumaila Field, Iraq, Abo Taleb Tuama Al-Hameedi

Masters Theses

“Drilling mud losses and problems associated with lost circulation while drilling account for a major expense in drilling oil and gas wells. By industry estimates, more than 2 billion USD is spent annually to combat and mitigate this problem (Ali et al., 2015).

The South Rumaila field in Iraq is one of the largest oilfields in the world. Wells drilled in this field are highly susceptible to lost circulation problems when drilling through the Dammam, Hartha and Shuaiba formations. Lost circulation events range from seepage losses to complete loss of the borehole and are a critical issue in field development. …

Oxidative Dehydrogenation Of Light Alkanes With Carbon Dioxide, Marktus A. Atanga

Masters Theses

”Most experts studying the global ecosystem and climate suggest that rising anthropogenic CO₂ emissions have contributed to significant global climate change in the last half-century. The development of effective strategies that convert CO₂ into energy, fuels, and chemicals are greatly preferable to oceanic or geologic sequestration options because they offer the potential to create new commercially-viable products from renewable carbon feedstock. On the other hand, the selective oxidative dehydrogenation of light alkanes (C₂-C₄) to corresponding olefins, methane reforming, and methane coupling are the major challenges for producing valuable and versatile feedstocks. The oxidative dehydrogenation …

Thresholding Techniques For Discrimination Of Seborrheic Keratosis From Melanoma In Dermoscopy Images, Pramada Kishtagari

Masters Theses

“Malignant melanoma is a very deadly form of skin cancer which has claimed many lives over the past few years. If detected early this can be cured, hence early detection of malignant melanoma is essential. Unfortunately melanoma is mimicked by seborrheic keratosis, a benign skin cancer. Identifying malignant melanoma as seborrheic keratosis using clinical diagnosis can prove fatal to the patient. To prevent such errors, dermoscopy, a common non-invasive skin imaging technique, is used which improves the diagnosis of these pigmented lesions by visualizing the morphological structures. This study proposes an automatic method by applying image processing techniques to aid …

Evaluation Of Highly Viscous Polymeric Fluids And Recrosslinked Degraded Gel, Danlu Zhang

Masters Theses

”This work presents the evaluations of two products. One can be used for hydraulic fracturing to achieve viscosity stable under high shear rate, and the other is potential to be applied to enhance oil recovery from mature oilfield.

The first experiment is to synthesize and evaluate a new polymeric fracturing fluid that can resist high shear rate of 511^-1 with favorable viscosity. Zirconium crosslinked fracturing fluids are lack of self-healing ability after shearing, and the difficulties still exist in maintaining viscous with lower polymer content exposed to high shearing conditions, therefore, the research is trying to develop a new …

Phase Field Modeling Of Electrodeposition Process In Lithium Metal Batteries, Nihal Acharya

Masters Theses

"One of the main weaknesses in long term performance of conventional lithium batteries is the growth of lithium microstructures on the electrode surface due to an electrochemical process, which can eventually lead to failure of these batteries. Suppressing this microstructure growth is a key in developing new generations of lithium metal batteries (LMBs). In this study, a two-dimensional (2D) phase field model is constructed to understand and determine the parameters controlling formation and evolution of microstructures in LMBs. A Ginzburg-Landau free energy functional, which is a function of concentration of Li⁺ and applied voltage, and a system consisting of …

Aspen Simulation Of Oil Shale And Biomass Process, Anand Alembath

Masters Theses

"This thesis focuses on design and analysis of two major chemical processes using computer simulation which performs a steady state computation. The objective is to design processes using Aspen simulation to establish optimum operating conditions by performing various simulation runs which are challenging to execute at lab scale.

Increasing energy needs and decline of global oil prices has shifted our focus on commercially developing unconventional and renewable resources. Commercialization of any process relies on developing a process model that identifies different process parameters by performing a steady state mass and heat balance. Aspen simulation is considered an effective process modeling …

Mechanics Of Impulse Force Reduction For Mitigating Dump Truck Vibrations Under Hislo Conditions, Danish Ali

Masters Theses

"The deployment of large capacity shovels and dump trucks, for achieving economic bulk production capacities, has resulted in high impact shovel loading operations (HISLO). These large shovels generate high impact forces when loading dump trucks with over 100-ton passes under gravity. The impact forces also generate high frequency shock waves, which cause severe truck vibrations, and thus, expose dump truck operators to high levels of whole body vibrations (WBV). The dynamic impact force generates these vibrations, and thus, there is a need to develop efficient technologies to eliminate or reduce its impact. Existing literature and industry practice show that this …

Iron Phosphide Nanostructures As An Efficient Bifunctional Catalysts For Water Splitting, Nikitaa Ashokan

Masters Theses

"The first part of this thesis work focuses on developing a bifunctional catalyst for electrochemical water splitting encompassing both oxygen and hydrogen evolution. A highly efficient catalyst is necessary to improve kinetics of the sluggish four electron process for oxygen evolution reaction (OER) and two-electron process for hydrogen evolution reaction (HER). Recently, transition metal phosphides have gained increasing interest in this field because of their good electrical conductivity properties as well as better catalytic activity. Many transition-metal phosphides are being considered for this application and iron phosphide (FeP) has proved to be a good HER catalyst. In this work, we …

Experimental Evaluations Of Selected Sealants To Remediate Co₂ Leakage, Aaron Jeffrey Blue

Masters Theses

"Carbon Dioxide (CO₂) sequestration into porous and permeable brine-filled aquifers is seen as one of the most feasible solutions for reducing the amount of greenhouse gases released into the atmosphere from coal-fired power plants. To safely store the CO₂, it must be trapped under an impermeable rock acting as a seal. One of the concerns with CO₂ sequestration is the generation of new fractures or reopening of existing fractures caused by CO₂ injection in the sealing formation. This project evaluates the potential of sealing these fractures by injecting sealing materials into them. These sealing …

Particle Mediated Enhanced Mass Transfer Of Diethylhexyl Phthalate: A Pilot Scale System Design, Melissa Buechlein

Masters Theses

"Phthalates are a class of SVOCs that are widely used as plasticizers and recently epidemiological and toxicological research has found a link between phthalate exposure and increased occurrences of adverse health effects. SVOCs can potentially partition into household dust and airborne particles. Models and micro chamber studies have identified that airborne particles effectively increase SVOC deposition to or emissions from surfaces; SVOCs partition to aerosols in the bulk air, the aerosols then migrate to the surfaces due to eddy and Brownian motion, and then the SVOCs is released inside the SVOC concentration boundary layer adjacent to the surface. Concentration boundary …

Tracking Silver, Gold, And Titanium Dioxide Nanoparticles Through Drinking Water Systems By Single Particle - Inductively Coupled Plasma - Mass Spectrometry, Ariel Renee Donovan

Masters Theses

"Single particle (SP)-ICP-MS methods were developed to characterize and quantify Ti-containing, titanium dioxide, silver, and gold NP concentration, size, size distribution and dissolved metal element concentration in surface water and treated drinking water. The effectiveness of conventional drinking water treatments (including lime softening, alum coagulation, filtration, and disinfection) to remove NPs from surface water was evaluated using six-gang stirrer jar test simulations. Six-gang stirrers were used to simulate drinking water treatments including lime softening, alum coagulation, powdered activated carbon sorption, filtration, and disinfection by free chlorine. Lime softening effectively removed most nanoparticles added. Source and drinking waters from three large …

Phytoforensics Tools: The Degradation And Detection Of Chlorinated Solvents In Integrated Systems, Tommy J. Goodwin Jr.

Masters Theses

"Due to decades of mismanaged pollutants entering groundwater, subsurface pollution of various compounds has become a widespread challenge. Chlorinated solvents are the most common groundwater contaminants that persist in aquifers, and remediation of these wide-spread plumes is difficult. Bioremediation, permeable reactive barriers, and phytoremediation are remedial technologies that have been developed and applied to chlorinated solvents in groundwater systems. This study integrates these technologies in different combinations to demonstrate the remediation potential of this approach. Zerovalent iron (ZVI) and bioaugmentation with a Dehalococcoides sp. (DHC) culture were applied separately and in combination for degradation of perchloroethene (PCE). Salix pentandra were …

Using Adaptive Thresholding And Skewness Correction To Detect Gray Areas In Melanoma In Situ Images, Jason R. Hagerty

Masters Theses

"The incidence of melanoma in situ (MIS) is growing significantly. Detection at the MIS stage provides the highest cure rate for melanoma, but reliable detection of MIS with dermoscopy alone is not yet possible. Adjunct dermoscopic instrumentation using digital image analysis may allow more accurate detection of MIS. Gray areas are a critical component of MIS diagnosis, but automatic detection of these areas remains difficult because similar gray areas are also found in benign lesions. This paper proposes a novel adaptive thresholding technique for automatically detecting gray areas specific to MIS. The proposed model uses only MIS dermoscopic images to …

Behavior Of Ultra-High Performance Concrete Bridge Deck Panels Compared To Conventional Stay-In-Place Deck Panels, Valter Gora Venancio

Masters Theses

"The remarkable features of ultra-high performance concrete (UHPC) have been reported. Its application in bridge construction has been an active research area in recent years, attributed to its higher compressive strength, higher ductility and reduced permeability when compared with conventional concrete and even high-strength concrete. Those characteristics are known to increase bridge durability and, consequently, decrease life-cycle maintenance costs.

With that in mind, this study investigated the performance of UHPC stay-in-place (SIP) bridge deck panels subjected to high loads in both flexure and shear. The test matrix consisted of twelve (12) half-scale panels that were 4 feet long and 2 …

An Imu-Based Spacecraft Navigation Architecture Using A Robust Multi-Sensor Fault Detection Scheme, Samuel J. Haberberger

Masters Theses

"Redundant sensor networks of inertial measurement units (IMUs) provide inherent robustness and redundancy to a navigation solution obtained by dead reckoning the fused accelerations and angular velocities sensed by the IMU. However, IMUs have been known to experience faults risking catastrophic mission failure creating large financial setbacks and an increased risk of human safety. Different fusion methods are analyzed for a multi-sensor network using cost effective IMUs, including direct averaging and covariance intersection. Simulations of a spacecraft in low Earth orbit are used to baseline a typical expensive IMU and compare the navigation solution obtained from a network of several …

The Impact Of Heat Exchanging Internals On Hydrodynamics Of Bubble Column Reactor, Ahmed Jasim

Masters Theses

"In this study, the impact of configuration and size of vertical heat exchanging internals in bubble columns on gas holdup, specific gas-liquid interfacial area, bubble chord length, and bubble rise velocity were investigated. Three different configurations of internals, each covering 25% of the column's cross-sectional area, were used to simulate the heat exchanging tubes utilized in the F-T process. The First configuration is a circular-like arrangement of 0.5 inch diameter vertical rods, whereas the second is a hexagonal-like arrangement of 0.5 inch diameter vertical rods. The third configuration is also a circular arrangement but of 1 inch diameter vertical rods …

Imaging Reinforced Concrete: A Comparative Study Of Ground Penetration Radar And Rebarscope, Abhishek Kodi

Masters Theses

"Geophysical techniques have been playing a very vital role in subsurface imaging in the recent past. Technology has been making it both reliable and convenient to utilize non-destructive geophysics techniques like Ground Penetration Radar, Induction current based Rebarscope, Seismic methods, ERT, etc. The applications range from shallow subsurface investigation of Bridge decks to old tunnels, mapping of rabars in a pre-existing construction and analyzing the concrete strength.

The thesis constitutes of a comparative study and analysis of a Ground Penetration Radar system and a Rebarscope. Individual parameters obtained directly from the study and obtained indirectly from the study shall be …

Silicone Hollow Fiber Membrane Bioreactors For Mixed Aerobic And Anaerobic Treatment Of Gas Phase Toluene And Trichloroethylene, Alexander Lee Korff

Masters Theses

"Volatile Organic Compounds (VOCs) are common in effluent waste streams from many sectors of industry and low-cost emission control technologies have the potential to mitigate long-term impacts on the environment. Federal Regulations, such as the Clean Air Act and National Emission Standards for Hazardous Air Pollutants (NESHAPS), as well as state regulations are imposing stricter requirements on point-source emissions, with an emphasis on toxic VOCs. Trichloroethylene (TCE) and tetrachloroethylene (PCE), which are toxic VOCs, have been used since the 1920's for a variety of industrial applications like: degreasing, paint and printing operations, as extraction solvents, and for cleaning and drying …

Measurements And Simulation Of Conductor-Related Loss Of Pcb Transmission Lines, Oleg Kashurkin

Masters Theses

"With continuously increasing data rates Signal Integrity (SI) problems become more and more challenging. One of the main issues in high-speed data transfer is the frequency-dependent loss of transmission lines. This thesis is dedicated to conductor-related loss mechanisms in printed circuit board (PCB) transmission lines.

This thesis provides the experimental investigation of conductor properties used for fabrication of PCBs. Particularly, the resistivity and conductivity along with the temperature coefficients of eleven copper types is measured and reported. A four probe measurement technique is used. Results were verified by two independent measurements and show discrepancy of less than 0.5%.

Another major …

Effect Of Sparse-Build Internal Structure On Performance Of Fused Deposition Modeling Parts, Shixuan Meng

Masters Theses

"Fused deposition modeling (FDM) technology has been used in additive manufacturing for years and is able to significantly reduce both manufacturing time and cost for production tooling and end-use parts. Autoclave molding is one of the conventional tools used to produce composite parts. In autoclave molding, the soft composite material is positioned on the molding tool, and then subjected to vacuum and elevated temperatures to facilitate the curing of the resin. With additive manufacturing (AM), it is possible to fabricate the molding tool with a sparse internal structure, thereby reducing the fabrication time and cost compared to a solid tool. …

Effect Of Build Parameters On Mechanical Properties Of Ultem 9085 Parts By Fused Deposition Modeling, Krishna Prasanth Motaparti

Masters Theses

"Additive manufacturing is a fabrication technique that is used to build components by depositing material in a layer-by-layer manner. Fused Deposition Modeling (FDM) is one of the additive manufacturing techniques which is widely used for prototyping and production applications of thermoplastic components. In load bearing applications, the flexural and compression forces often coexist. In order to avoid failure under these loads, it is essential to study the mechanical properties of the components fabricated by FDM. The main focus of this research is to study the mechanical properties of the fabricated components and to comprehend their dependence on various build parameters. …

Assessing Downstream Stormwater Impacts For Urban Watershed Planning, Johanna Meyer Pavlowsky

Masters Theses

"The urbanization of watersheds has caused debilitating effects to downstream aquatic ecosystems in catchments and streams. The implementation of green infrastructure (GI), such as permeable pavements and bioretention facilities, has been shown to alleviate these effects by both reducing runoff and mitigating pollutants; however, the implements are often not designed with a specific goal of water improvement. This study targets understanding a small, impaired urban watershed, and the benefits green infrastructure may have to provide environmental, social, and economic improvement to the watershed.

Portions of Rolla including much of the S&T campus drain into the impaired urban waterbody Frisco Lake, …

A Meta-Architecture Analysis For A Coevolved System-Of-Systems, George Anthony Muller Iv

Masters Theses

"Modern engineered systems are becoming increasingly complex. This is driven in part by an increase in the use of systems-of-systems and network-centric concepts to improve system performance. The growth of systems-of-systems allows stakeholders to achieve improved performance, but also presents new challenges due to increased complexity. These challenges include managing the integration of asynchronously developed systems and assessing SoS performance in uncertain environments.

Many modern systems-of-systems must adapt to operating environment changes to maintain or improve performance. Coevolution is the result of the system and the environment adapting to changes in each other to obtain a performance advantage. The complexity …

Material Properties Affecting The Penetration Of Metal Targets By Copper Linear Shaped Charges, Kevin Lee Phelps

Masters Theses

"A linear shaped charge (LSC) is an explosive device used in demolition, aerospace, and in other applications that require the cutting of metal. Users of LSC's typically know the size of shaped charge needed to cut their target but commonly encounter previously untested materials. The motivation for this thesis is to provide an understanding as to what target material properties are good indicators of cutting performance so the selection of LSC can be more efficient. The author found that penetration theories for other types shaped charges were insufficient for the LSC, possibly because of the relatively slow projectile created by …