Engineering Commons^™

On The Growth Rate Of Turbulent Mixing Layers: A New Parametric Model, Jeffrey L. Freeman

Master's Theses

A new parametric model for the growth rate of turbulent mixing layers is proposed. A database of experimental and numerical mixing layer studies was extracted from the literature to support this effort. The domain of the model was limited to planar, spatial, nonreacting, free shear layers that were not affected by artificial mixing enhancement techniques. The model is split into two parts which were each tuned to optimally fit the database; equations for an incompressible growth rate were derived from the error function velocity profile, and a function for a compressibility factor was generalized from existing theory on the convective …

Compacting Loads And Stores For Code Size Reduction, Isaac Asay

Master's Theses

It is important for compilers to generate executable code that is as small as possible, particularly when generating code for embedded systems. One method of reducing code size is to use instruction set architectures (ISAs) that support combining multiple operations into single operations. The ARM ISA allows for combining multiple memory operations to contiguous memory addresses into a single operation. The LLVM compiler contains a specific memory optimization to perform this combining of memory operations, called ARMLoadStoreOpt. This optimization, however, relies on another optimization (ARMPreAllocLoadStoreOpt) to move eligible memory operations into proximity in order to perform properly. This mover optimization …

Learning About Led Lighting Technology Through Patents, Joe C. Liu

Master's Theses

Patents and published patent applications are valuable resources to students, engineers, and researchers for learning about technology. This thesis investigated the ability to learn about a technology through the disclosures that are made in published patent applications and issued patents.

This thesis first provides an overview of U.S. patent law, system, and resources that are available to the public. It is through an understanding of U.S. patent law and system that one can appreciate that patents and patent applications are a resource for learning about technology.

By providing the basic building blocks of LED lighting technology as learned through the …

Investigation Of Degradation Effects Due To Gate Stress In Gan-On-Si High Electron Mobility Transistors Through Analysis Of Low Frequency Noise, Michael Curtis Meyer Masuda

Master's Theses

Gallium Nitride (GaN) high electron mobility transistors (HEMT) have superior performance characteristics compared to Silicon (Si) and Gallium Arsenide (GaAs) based transistors. GaN is a wide bandgap semiconductor which allows it to operate at higher breakdown voltages and power. Unlike traditional semiconductor devices, the GaN HEMT channel region is undoped and relies on the piezoelectric effect created at the GaN and Aluminum Gallium Nitride (AlGaN) heterojunction to create a conduction channel in the form of a quantum well known as the two dimensional electron gas (2DEG). Because the GaN HEMTs are undoped, these devices have higher electron mobility crucial for …

Tunnel Road Safety: A Look At Older Drivers' Performance And Sight Impairment, Edith Lopez

Master's Theses

In California, there is an observed trend in which collisions cluster in and around tunnels. The break in road continuity created by the tunnels disturbs traffic flow that can lead to collisions. One of the main contrasts between open roads and tunnel roads occurs in lighting. Drivers with sight deficiencies are unable to adapt their sight to the change in the lighting environment and may crash due to misperception of road alignment, vehicle’s speed and other physiological reactions, such as tension. The suspect population group of crashes occurring under the influence of tunnels conditions is older drivers.

The literature suggests …

Flight And Stability Of A Laser Inertial Fusion Energy Target In The Drift Region Between Injection And The Reaction Chamber With Computational Fluid Dynamics, Tiffany Leilani Mitori

Master's Theses

A Laser Inertial Fusion Energy (LIFE) target’s flight through a low Reynolds number and high Mach number regime was analyzed with computational fluid dynamics software. This regime consisted of xenon gas at 1,050 K and approximately 6,670 Pa. Simulations with similar flow conditions were performed over a sphere and compared with experimental data and published correlations for validation purposes. Transient considerations of the developing flow around the target were explored. Simulations of the target at different velocities were used to determine correlations for the drag coefficient and Nusselt number as functions of the Reynolds number. Simulations with different target angles …

Development Of Safety Standards For Cubesat Propulsion Systems, Liam Jon Cheney

Master's Theses

The CubeSat community has begun to develop and implement propulsion systems. This movement represents a new capability which may satisfy mission needs such as orbital and constellation maintenance, formation flight, de-orbit, and even interplanetary travel. With the freedom and capability granted by propulsion systems, CubeSat providers must accept new responsibilities in proportion to the potential hazards that propulsion systems may present.

The Cal Poly CubeSat program publishes and maintains the CubeSat Design Specification (CDS). They wish to help the CubeSat community to safety and responsibly expand its capabilities to include propulsive designs. For this reason, the author embarked on the …

Design Of Controlled Environment For Tissue Engineering, Malcolm Gerald Lapera

Master's Theses

Design of Controlled Environment for Tissue Engineering

Malcolm Lapera

Tissue engineering aims at relieving the need for donor tissue and organs by developing a process of creating viable tissues in the laboratory setting. With over 120,000 people awaiting a transplant, the need for generating tissue engineered organs is very large [3]. In order for organs to be engineered, a few issues need to be overcome. A work space that both creates an environment which maintains cell viability over an extended period of time as well as accommodates the necessary fabrication equipment will be needed to further tissue engineering research. Therefore, …

Study The Effects Of Core Orientation And Different Face Thicknesses On Mechanical Behavior Of Honeycomb Sandwich Structures Under Three Point Bending, Joshua M. Lister

Master's Theses

This study will present the Experimental, numerical and analytical characterizations of composite sandwich structures needed to optimize structure design. In this study, the effects of varying honeycomb core ribbon orientation and varying face sheet thickness’s have on the flexural behavior of honeycomb sandwich structures was investigated. Honeycomb sandwich panels were constructed using Hexcel 6367 A250-5H carbon fiber face sheets and Hexcel Nomex HRH-10-1/8-5 honeycomb cores. The mechanical properties of the constituent materials were discovered experimentally using ASTM standards and theoretical models using honeycomb mechanics and classical beam and plate theory are described. A failure mode map for loading under three …

St. Jude Medical: Pulmonary Edema Monitoring In Pacemakers And Icds, David Wei-Péng Chang

Master's Theses

Pulmonary edema occurs when fluid leaks from the pulmonary capillary network into the lung interstitium and alveoli. When the heart is not able to pump blood to the body efficiently, fluid can back up into the veins that take blood through the lungs to the left atrium. This then builds up the pressure in the blood vessels and fluid is pushed into the alveoli in the lungs. The fluid reduces normal oxygen movement through the lungs and can cause impaired gas exchange and respiratory failure. There are many causes of congestive heart failure that may lead to pulmonary edema such …

Active Learning Using Model-Eliciting Activities And Inquiry-Based Learning Activities In Dynamics, Jeffrey Phillip Georgette

Master's Theses

This thesis focuses on a year-long project of implementing active learning in undergraduate dynamics courses at Cal Poly San Luis Obispo from 2012-2013. The purpose is to increase conceptual understanding of critical dynamics concepts and to repair misconceptions of the students. Conceptual understanding in Dynamics is vital to understanding the big picture, building upon previous knowledge, and better understanding the behavior of engineering systems. Through various hands-on activities, students make predictions, test their conceptions, and solve real world problems. These active learning methods allow students to improve their learning of Dynamics concepts. Education research on active learning is present in …

Functional 3-D Cellulose & Nitrocellulose Paper-Based, Multiplex Diagnostic Platforms Without Coupling Agents, Mackenzie Elizabeth Tageson

Master's Theses

The purpose of this thesis was to demonstrate device functionality of 3-D paper-based, multiplex platforms, µPADs, without the use of coupling agents between layers. Previously, these platforms were fabricated with double-sided tape and cellulose powder to try to augment proper fluid routing, but difficulties with this method occurred. An acrylic housing unit with strategically placed pressure tabs was designed to aid horizontal and vertical fluid routing through the platform, thus eliminating the inconsistencies associated with coupling agents. Channel characterization studies, a COMSOL^TM simulation, and development time studies were performed to aid device design and demonstrate device functionality.

The implementation …

Design Of A Low Power Cargo Security Device Using A Micropower Ultra-Wideband Impulse Radar, Brian M. Wihl

Master's Theses

Each year, thousands of cargo containers are broken into during shipping, costing billions of dollars in lost and damaged goods. In addition to removing its contents, intruders can also add unwanted and dangerous materials to a container, posing a threat to National Security. The possibilities of cargo container break-ins require that the containers go through check points at which they are physically searched. These searches often require the opening of the container, unloading and inspecting all cargo, and then loading the container and resealing it. This is a long and costly process.

Because of the high costs of break-ins and …

Investigation Of Parameters Influencing Reverse Fault Rupture Propagation To The Ground Surface, Kevin V. Stanton

Master's Theses

Surface fault rupture poses a serious threat to infrastructure in many seismically active regions, but knowledge about the factors which control the likelihood of surface displacement is limited. Current probabilistic frameworks rely only on fault mechanism and moment magnitude to predict the probability of rupture to the ground surface. However, recent work has shown that there may be other parameters which also deserve consideration. For example, statistical analyses have demonstrated that variation in near surface material stiffness may significantly affect the probability of surface rupture over reverse faults. In addition, numerical investigations indicate that the rupture history of native soil …

Measuring The Counter/Assumption Model's Effect On Argumentation Quality, Evan D G Ovadia

Master's Theses

This thesis presents a new platform called See the Reason, built upon a tree- structured argumentation model called the Counter/Assumption model. In the Counter/Assumption model, a topic is posted first, then under that topic, reasons for and against, and for each reason, counterarguments, and for any counterargu- ment, more counterarguments. The model enables us to systematically determine whether a claim is “tentatively true” or “tentatively false,” in an effort to motivate people to make their side’s claims tentatively true and the opposing side’s claims tentatively false, thus encouraging conflict. Research suggests that debates with more conflict are better, so this …

Analysis Of An Inflatable Gossamer Device To Efficiently De-Orbit Cubesats, Robert A. Hawkins Jr.

Master's Theses

There is an increased need for spacecraft to quickly and efficiently de-orbit themselves as the amount of debris in orbit around Earth grows. Defunct spacecraft pose a significant threat to the LEO environment due to their risk of fragmentation. If these spacecraft are de-orbited at the end of their useful life their risk to future spacecraft is greatly lessened. A proposed method of efficiently de-orbiting spacecraft is to use an inflatable thin-film envelope to increase the body's area to mass ratio and thusly shortening its orbital lifetime. The system and analysis presented in this project is sized for use on …

A Software Development Kit For Camera-Based Gesture Interaction, Devlin Cronin

Master's Theses

Human-Computer Interaction is a rapidly expanding field, in which new implementations of ideas are consistently being released. In recent years, much of the concentration in this field has been on gesture-based control, either touch-based or camera-based. Even though camera-based gesture recognition was previously seen more in science fiction than in reality, this method of interaction is rising in popularity. There are a number of devices readily available to the average consumer that are designed to support this type of input, including the popular Microsoft Kinect and Leap Motion devices.

Despite this rise in availability and popularity, development for these devices …

Mode I Fracture Toughness Of Eight-Harness-Satin Carbon Cloth Weaves For Co-Cured And Post-Bonded Laminates, Josh E. Smith

Master's Theses

Mode I interlaminar fracture of 3k 8-Harness-Satin Carbon cloth, with identical fill and weft yarns, pre-impregnated with Newport 307 resin was investigated through the DCB test (ASTM D5528). Crack propagations along both the fill and weft yarns were considered for both post-bonded (co-bonded) and co-cured laminates. A patent-pending delamination insertion method was compared to the standard Teflon film option to assess its applicability to mode I fracture testing. The Modified Beam Theory, Compliance Calibration method, and Modified Compliance Calibration method were used for comparative purposes for these investigations and to evaluate the validity of the proposed Equivalent Stiffness (EQS) method. …

Constant Voltage Hot-Wire Anemometry For The Boundary Layer Data System, Hon Yee Li

Master's Theses

To continue the development of the Boundary Layer Data System (BLDS), a constant voltage hot-wire anemometer (CVA) is implemented into the BLDS for flight-testing. The hot-wire anemometer was chosen as an alternative to the traditional pressure probe because of the ability to measure both average velocity and fluctuating velocity within the boundary layer. Previous work done on the benchtop has led to the design of miniaturization, flight-capable hardware for the BLDS. The next step in the development of the BLDS – CVA calls for quantifying the accuracy of the boundary layer measurements measured by the CVA system. To do this, …

Adaptive Control Techniques For Transition-To-Hover Flight Of Fixed-Wing Uavs, Brian Decimo Marchini

Master's Theses

Fixed-wing unmanned aerial vehicles (UAVs) with the ability to hover combine the speed and endurance of traditional fixed-wing fight with the stable hovering and vertical takeoff and landing (VTOL) capabilities of helicopters and quadrotors. This combination of abilities can provide strategic advantages for UAV operators, especially when operating in urban environments where the airspace may be crowded with obstacles. Traditionally, fixed-wing UAVs with hovering capabilities had to be custom designed for specific payloads and missions, often requiring custom autopilots and unconventional airframe configurations. With recent government spending cuts, UAV operators like the military and law enforcement agencies have been urging …

Reassessment Of Biowish Activation Procedure For Denitrification, William Wah Yee

Master's Theses

BiOWiSH^TM – Aqua is a blend of preserved multi-bacteria culture with the capability of denitrification. If an anaerobic nitrate rich activation procedure is used instead of the standard aerobic activation procedure, the denitrification rate is increased by 28 percent under the conditions of 30°C, 1C:1N, 200mg/L of carbon, and 200mg/L nitrogen.

High Voltage Pulse Measurement System, Angelo J. Ballungay

Master's Theses

Using isolation and noise immunity techniques, this thesis designs and constructs a low cost measurement system to safely and accurately measure high voltage, high frequency pulses in harsh EM environments. High voltage pulses apply to medical, plasma, and food industries. The difficulty of accurately measuring high voltage pulses continues to pose an issue. Measuring high voltage systems can cause damage to the system, the measurement system, and the user. High voltage and high frequency pulses create a harsh environment of electromagnetic fields that can disrupt the circuitry of the measurement system and harm the user. Implementing isolation from the high …

Enhancing Gan Led Efficiency Through Nano-Gratings And Standing Wave Analysis, Gabriel M. Halpin

Master's Theses

Improving energy efficient lighting is a necessary step in reducing energy consumption.Lighting currently consumes 17% of all U.S. residential and commercial electricity, but a report from the U.S. Office of Energy Efficiency and Renewable Energy projects that switching to LED lighting over the next 20 years will save 46% of electricity used in lighting.GaN LEDs are used for their efficient conversion of electricity to light, but improving GaN efficiency requires optically engineering the chip to extract more light.Total internal reflection limits GaN LED performance since light must approach the chip surface within 23.6° of normal to escape into air.This thesis …

Lipid Production By Microalgae Treating Municipal Wastewater, James Edward Kelley

Master's Theses

Microalgae hold much promise as a feedstock in liquid biofuel production. Lipid content of microalgae cells range from 30-80% dry weight of biomass. It is projected that microalgae can produce between 1,000-6,500 gallons/acre/year of oil. Currently, production of industrial algae operates in open raceway ponds that use minimal capital and energy inputs to culture algae. Raceway ponds can also be used to grow microalgae from municipal waste streams. Although high biomass productivity can be achieved in these systems, there remains a large production gap between large volumes of biomass cultivation and high lipid content from microalgae cells. Low lipid content …

Large-Displacement Lightweight Armor, Eric C. Clough

Master's Theses

Randomly entangled fibers forming loosely bound nonwoven structures are evaluated for use in lightweight armor applications. These materials sacrifice volumetric efficiency in order to realize a reduction in mass versus traditional armor materials, while maintaining equivalent ballistic performance. The primary material characterized, polyester fiberfill, is shown to have improved ballistic performance over control samples of monolithic polyester as well as 1095 steel sheets. The response of fiberfill is investigated at a variety of strain rates, from quasistatic to ballistic, under compression, tension, and shear deformation to elucidate mechanisms at work during ballistic defeat. Fiberfill’s primary mechanisms during loading are fiber …

Action Potential Simulation Of The Hirudo Medicinalis's Retzius Cell In Matlab, Zechari Ryan Tempesta

Master's Theses

Modification of Hodgkin and Huxley’s experimentally derived set of nonlinear differential equations was implemented to accurately simulate the action potential of the Hirudo Medicinalis’s Retzius cell in MATLAB under analogous conditions to those found in the Retzius cell environment. The voltage-gated sodium and potassium channel responses to changes in membrane potential, as experimentally determined by Hodgkin and Huxley, were manipulated to suit simulation parameters established by electrophysiological Retzius cell recordings. Application of this methodology permitted additional accurate simulation of the Hirudo Medicinalis’s P cell under analogous conditions to those found in the P cell environment. Further refinement of this technique …

Development And Validation Of A Human Knee Joint Finite Element Model For Tissue Stress And Strain Predictions During Exercise, Spencer D. Wangerin

Master's Theses

Osteoarthritis (OA) is a degenerative condition of cartilage and is the leading cost of disability in the United States. Motion analysis experiments in combination with knee-joint finite element (FE) analysis may be used to identify exercises that maintain knee-joint osteochondral (OC) loading at safe levels for patients at high-risk for knee OA, individuals with modest OC defects, or patients rehabilitating after surgical interventions. Therefore, a detailed total knee-joint FE model was developed by modifying open-source knee-joint geometries in order to predict OC tissue stress and strain during the stance phase of gait. The model was partially validated for predicting the …

Development And Validation Of A Human Hip Joint Finite Element Model For Tissue Stress And Strain Predictions During Gait, Jeffrey D. Pyle

Master's Theses

Articular cartilage degeneration, called osteoarthritis, in the hip joint is a serious condition that affects millions of individuals yearly, with limited clinical solutions available to prevent or slow progression of damage. Additionally, the effects of high-risk factors (e.g. obesity, soft and hard tissue injuries, abnormal joint alignment, amputations) on the progression of osteoarthritis are not fully understood. Therefore, the objective of this thesis is to generate a finite element model for predicting osteochondral tissue stress and strain in the human hip joint during gait, with a future goal of using this model in clinically relevant studies aimed at prevention, treatment, …

Formulation Development Of A Polymer-Drug Matrix With A Controlled Release Profile For The Treatment Of Glaucoma, Eric W. Tsoi

Master's Theses

Glaucoma is the leading cause of blindness in the United States accounting for 9-12% of all cases of blindness. Currently, the front line treatment for glaucoma are prostaglandins that may have to be taken up to several times a day. Even with proper treatment, roughly 11% of the patients using the treatment are non-compliant and lose their vision. In this project, ForSight Laboratories has developed a pharmaceutical drug delivering implant with the capability of sustaining long-term release of a prostaglandin as a new way to treat the condition. This project reports the product development of a polymer drug matrix with …

Hollow Plume Mitigation Of A High-Efficiency Multistage Plasma Thruster, Scott Alan Mcgrail

Master's Theses

Since 2000, a relatively new electric thruster concept has been in research, development, and production at Thales Electron Devices in Germany. This High Efficiency Multistage Plasma Thruster, or HEMPT, has promising lifetime capabilities due to its plasma confinement system. However, the permanent magnet system that offers this and other benefits also creates a hollow plume, where ions are accelerated at angles rather than up the thruster centerline, causing a dip in ion current along the centerline. A laboratory model, built at JPL, was run at Cal Poly to characterize this plume shape and implement a shield to restore a conical …