Engineering Commons^™

Level 3 High Powered Rocketry Certification Through Tripoli Rocketry Association, Zachary Foster

Undergraduate Honors Capstone Projects

This paper aims to give an overview of the Level 3 certification process through the TRIPOLI Rocketry Association. This paper will also give an overview of Zachary Foster’s Level 3 Certification submission. The overview of the certification submission will include fin flutter calculations, stability calculations, descent rate calculations, flight simulations, flight results, construction overview, drawing package for the airframe, and pre-flight checklists. The results of fin flutter calculations showed that the minimum flutter speed is 1972 ft/s. The maximum flight velocity is 1309.6 ft/s. The flutter calculation has a total factor of safety of 1.5. The stability calculations show a …

Algae Against Deforestation: Algae Oil As A Potential Palm Oil Substitute, Abiela Meek

Undergraduate Honors Capstone Projects

This capstone project is an effort to pursue sustainability through circular engineering design. With increasing interest in sustainable production of consumer products, creative and multifaceted solutions are the pathway forward to a more circular economy. Palm oil production is a key driver of deforestation worldwide and an unsustainable industry. As palm oil is a large player in the commodities market, evaluating a potential replacement provided a unique opportunity for sustainable circular engineering. High nitrogen and phosphorus concentrations in wastewater are also a cause for environmental concern as they can lead to harmful algal blooms. By utilizing the nitrogen and phosphorus …

Comparing 1d, 2d, And 3d Hydraulic Models In Urban Flooding Applications, Taylor Kesler

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Floods have been a hazard to people since people first started building near rivers. Predicting floods can be very beneficial to save lives and property. Computers have made it possible to solve fluid dynamics equations in a fast and efficient manner. Computer programs have been designed to solve these equations and create digital models of floods.

This study compares three different methods of computer modeling and explores their advantages and disadvantages. One-dimensional models solve fluid equations by setting up a series of cross sections. Two-dimensional models use a grid-like mesh to solve fluid equations from one cell to the next. …

Estimating Seasonal Crop Water Consumption In Irrigated Lands Using Soil Moisture And Reference Evapotranspiration, Oliver Henry Hargreaves

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The increase in population and the megadrought that the American west has been experiencing for the past two decades and for the foreseeable future are the cause of great stress on the region’s water resources. In an effort to mitigate the worst effects of water shortages many public and private agencies have been pursuing ways to reduce water use while maintaining the current status quo of living standards, industrial productivity, and agricultural yield. This project aims to study water use in irrigated lands dedicated to agriculture with the objective of quantifying crop water use, often referred to as evapotranspiration (ET), …

Improved Sustainability And Efficiency Of Partial Depth Concrete Bridge Deck Repair, Israi I. H. Abu Shanab

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Recently, significant advances have been made in the development of rapid setting cementitious materials for partial depth bridge deck repair. The rapid set times of these materials allow for traffic to be re-opened onto the bridge deck in several hours versus days once the material has been placed. While this is a substantial improvement in reducing the traffic closure time, a large amount of time is still spent on the removal of damaged and deteriorated bridge deck and in preparing the concrete cutouts for placement of the rapid set material. Partial deck removal is a much more delicate process than …

Convexity Applications In Single And Multi-Agent Control, Olli Nikodeemus Jansson

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The focus of this dissertation is in the application of convexity for control problems; specifically, single-agent problems with linear or nonlinear dynamics and multi-agent problems with linear dynamics. A mixture of convex and non-convex constraints for optimal control problems is also considered. The main contributions of this dissertation include: 1) a convexification of single-agent problems with linear dynamics and annular control constraint, 2) a technique for controlling bounded nonlinear single-agent systems, and 3) a technique for solving multi-agent pursuit-evasion games with linear dynamics and convex control and state constraints. The first result shows that for annularly constrained linear systems, controllability …

Low-Erosion Nozzle Materials For Long-Duration Hybrid Rocket Burns, Russell S. Babb

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Hybrid rocket systems, which employ a solid fuel grain and a liquid oxidizer, are a low-cost and environmentally friendly alternative to traditional rocket systems. However, hybrid rockets suffer from an increased nozzle throat erosion rate, which impacts motor performance and reliability. To address this issue several materials and low-erosion nozzle configurations were tested. The results of the testing campaign produced a nozzle that reduce the throat erosion rate five-fold.

The Active Cryocubesat Technology: Active Thermal Control For Small Satellites, Lucas S. Anderson

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Modern CubeSats and Small Satellites have advanced in capability to tackle science and technology missions that would usually be reserved for more traditional, large satellites. However, this rapid growth in capability is only possible through the fast-to-production, low-cost, and advanced technology approach used by modern small satellite engineers. Advanced technologies in power generation, energy storage, and high-power density electronics have naturally led to a thermal bottleneck, where CubeSats and Small Satellites can generate more power than they can easily reject. The Active CryoCubeSat (ACCS) is an advanced active thermal control technology (ATC) for Small Satellites and CubeSats, which hopes to …

Groundwater-Surface Water Interaction To Increase Groundwater Availability, Saeid Masoudiashtiani

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This study develops procedures for using surface water to increase groundwater availability and sustainable yield, and for evaluating impacts on surface water. Increasing sustainable groundwater yield requires reducing the gap between the volumes of discharge from versus recharge to an aquifer. The study presents procedure for water user(s) to help increase groundwater availability. Toward that end, this study simulates and evaluates: a) aquifer storage and recovery (ASR) of water diverted from Red Butte Creek in Salt Lake Valley, Utah for subsequent turf irrigation; b) ASR injection of residential runoff from daily rainfall for subsequent extraction to irrigate turf; and c) …

Laboratory Modelling Of The Various Components Of Backward Erosion Piping Behavior Due To Converging Flow With Different Constricted Outlets, Ibrahim Ahmed Abdelmotelb Ibrahim

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Backward Erosion Piping (BEP) is an internal erosion mechanism which occurs at the down stream of dams or levees. Two conditions needed for this failure to occur: 1) head of water in the upstream of the dam or the levee to drive the seepage forces, and 2) crack in the roof or the blanket layer of the cohesionless material in the downstream of the dam or a levee. Numerous researches were performed in the past in an attempt to predict the critical gradient for BEP to initiate. Some researches are too conservative and other researches are under predicting the critical …

Aerodynamic Implications Of A Bio‐Inspired Rotating Empennage Design For Control Of A Fighter Aircraft, Christian R. Bolander

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This dissertation presents an analysis of the aerodynamics for an aircraft using a novel, bio-inspired control system. The control system is a rotating tail, that is inspired by the way in which birds use their tail to control their flight. An aerodynamic model for a baseline aircraft and a bio-inspired variant are created by referencing well-known relationships for the aerodynamics of flight, which are then used to analyze the available flight envelope at which each aircraft can reach two different equilibrium states. An analysis of the total aerodynamic control authority of each aircraft is also included along with a preliminary …

Locating Low Head Dams Using A Deep Learning Model In Arcgis Pro With Aerial Imagery, Caitlin R. Arnold

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Low Head Dams are man-made structures that span the width of a river and allow water to flow over them. Although these structures vary in age and original purpose, some pose a life-threatening danger when recreationalists are entrapped in the reverse current at the toe. Despite these dangerous structures causing many drowning deaths in the USA each year, most low head dams do not have safety regulations and remain unknown to those charged with dam and public safety. Thus, to improve public safety at these structures, the first step is to fully inventory low head dams, so that subsequent efforts …

Probabilistic Verification For Modular Network-On-Chip Systems, Jonah W. Boe

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Modeling physical systems with formal analysis tools can help in the design of more fault-proof systems, by helping to determine if unpredictable or unwanted behavior may occur. Probabilistic verification further advances such processes, by providing quantitative information about the system. More complex systems can especially benefit from formal modeling and verification, as testing the physical system in every possible condition manually, can be extremely complex, and often impossible.

There is a growing interest in the application of Network-on-Chip (NoC) systems. NoCs can help simplify communication between the subsystems of many technologies, including the ever more complex multicore processors being produced. …

Dynamic Inductive Power Transfer Systems With Reflexive Tuning Networks Designed By Machine Learning, Shuntaro Inoue

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This dissertation proposes a new way to make dynamic wireless charging systems more affordable. Instead of using one inverter for each transmitter coil, as is typically done, the proposed system uses a single inverter that is connected to multiple transmitter coils. This approach is made possible by reflexive tuning, which allows for high currents to be achieved only on the transmitter coil in use. The system was tested with a 50kW prototype, designed using a combination of neural networks and genetic algorithms. The prototype was tested on both automated rail and vehicle systems. The measured dc-dc efficiency with single and …

A Questionnaire Survey Of Student Engagement Among First-Generation College Students In Engineering, Abigail Lehto

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

First-generation college (FGC) students are defined as students whose parents do not have a bachelor's or graduate degree. FGC students tend to face more overall challenges in the college environment than their continuing-generation counterparts. Often, FGC students have lower grade-point-averages (GPAs) and are less likely to graduate than their peers. In majors like engineering, the struggles that first-generation college students face can be further magnified. This quantitative study examines the activities FGC students in engineering engage in based on the National Survey of Student Engagement (NSSE). Questions from the NSSE cover different educational activities and are categorized into ten educational …

Viability And Performance Of Rf Source Localization Using Autocorrelation-Based Fingerprinting, Joseph L. Ipson

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Finding the source location of a radio-frequency (RF) transmission is a useful capability for many civilian, industrial, and military applications. This problem is particularly challenging when done “Blind,” or when the transmitter was not designed with finding its location in mind, and relatively little information is available about the signal before-hand. Typical methods for this operation utilize the time, phase, power, and frequency viewable from received signals. These features are all less predictable in indoor and urban environments, where signals undergo transformation from multiple interactions with the environment. These interactions imprint structure onto the received signal which is dependent on …

Communication‐Less Synchronous Rectification For In Motion Wireless Charging, Joshua B. Larsen

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This thesis puts forward a control scheme to allow for synchronous rectification for dynamic wireless power transfer. The automotive industry is transitioning away from internal combustion engines (ICEs) and towards electric vehicles (EVs). This transition is spurred by the environmental and economic benefits EVs offer over ICEs. However, further improvements can still be made to how electric vehicles operate. One of these improvements is the technology of in motion wireless charging or dynamic wireless power transfer. In motion wireless charging offers the ability to remove existing range anxiety concerns for EVs. It also offers the potential for a reduction in …

Top Mat Reinforcement Alternatives For Concrete Pavement Slabs With Embedded Inductive Power Transfer Systems, Thaddeus J. Hansen

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Electric Vehicles (EVs) are continually becoming a larger portion of the vehicular fleet on a national and global level. Despite their growth in popularity, several challenges still exist that hinder the practicality and general public’s acceptance of EVs. The limited travel range of EVs, lack of consistent charging stations, and required time to charge EVs are at the forefront of these challenges. The use of Inductive Power Transfer Systems (IPTS) may be part of the solution to the afore mentioned issues.

IPTS embedded in concrete pavement panels allow EVs to charge their batteries while in motion. In order to justify …

The Influence Of Surface Roughness Frequency On Rotating Sphere Aerodynamics, Jack C. Elliott

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Solving the problems of increasing highway fuel efficiency, throwing a better curve ball, and preventing an aircraft from stalling all have a common thread: controlling flow separation. Defined by the fast moving flow around an object detaching from the object, flow separation has implications for a broad number of engineering fields. Research regarding flow separation control has led to the understanding that the easiest method for delaying flow separation for a given shape is to vary how turbulent the flow around the object is. Varying this turbulence around an object may be achieved through various methods including changing the …

Producing Analytical Models Of The Sport Spacecraft For Science Data Processing, Jason L. Powell

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The Scintillation Prediction Observation Research Task (SPORT) is a joint United States of America and Brazil 6U CubeSat mission. The SPORT mission is to understand how the Earth’s ionosphere evolves during day and night transitions. Space Weather Probes, a suite of instruments developed by Utah State University, monitors the ionosphere by observing currents and voltages around the SPORT spacecraft body. This thesis presents the data collected by Space Weather Probes and how it is used to measure the ionosphere. Modeling techniques are also presented to demonstrate how the Space Weather Probes instrument is expected to respond to the ionosphere.

Case Study: Modeling A Grain Bin For Safe Entry Retrofit, Michael Dyer, Serap Gorucu, Randall Bock, Roderick Thomas, Jude Liu, Linda Fetzer

Office of Research Faculty and Staff Publications

All new grain bins produced after 2018 are recommended to have anchor points capable of handling a 2000 lb loading for attachment of bin entry lifeline systems. This study aims to assess the feasibility of a safe entry anchor point retrofit by using finite element analysis (FEA). We used a grain bin owned by Penn State for 3D FEA modeling in SolidWorks. To validate the model results from the FEA model, first strain and then deflection measurements were conducted on the grain. Strain gauges were applied to the grain bin in five locations and strain values were obtained after applying …

Nematocidal And Bactericidal Activities Of Green Synthesized Silver Nanoparticles Mediated By Ficus Sycomorus Leaf Extract, Dina Elkobrosy, Abdulaziz A. Al-Askar, Hamada El-Gendi, Yiming Su, Rokaia Nabil, Ahmed Abdelkhalek, Said Behiry

Civil and Environmental Engineering Faculty Publications

Nanoparticles effectively control most plant pathogens, although research has focused more on their antimicrobial than their nematocidal properties. This study synthesized silver nanoparticles (Ag-NPs) through a green biosynthesis method using an aqueous extract of Ficus sycomorus leaves (FS-Ag-NPs). The nanoparticles were characterized using SEM, TEM, EDX, zeta sizer, and FTIR. The TEM results showed that the synthesized NPs were nanoscale and had an average particle size of 33 ± 1 nm. The elemental silver signal at 3 keV confirmed the formation of Ag-NPs from an aqueous leaf extract of F. sycomorus. The FTIR analysis revealed the existence of several …

Nanoscale Mechanics Of Li Anodes In Solid-State Li Batteries, Md Takmil Sakir

Student Research Symposium

Solid-state Li metal batteries have emerged as a promising way to enhance energy density and safety compared to the traditional Li-ion batteries. Even though numerous research studies are being conducted in this field, many unresolved issues have been hindering the commercialization of such batteries such as dendrite formation, loss of contact, battery failure in low cycles, etc. One of the reasons is the lack of knowledge on the deformation mechanisms (especially creep) at the atomistic level. In this study, Molecular Dynamics simulations have been performed and the creep behavior and superplasticity of pure Lithium was observed in nano scale. Grain …

Advances In Alkaline Water Electrolysis And Way Forward: A Review, Manjur Basnet

Student Research Symposium

Low cost and large stack manufacturing have favored the commercialization of low temperature Alkaline Electrolyzers (AEL). However, due to the nature of its operation at lower current density and temperature, AEL systems have a lower hydrogen production rate and efficiency as compared to its counterparts, PEM (Proton Exchange Membranes) and SOE (Solid-Oxide Electrolysis). Studies related to the use of higher temperature and use of advanced materials for diaphragm and electrocatalysts have been conducted. These studies are aimed at improving the performance of AEL systems without significantly increasing the cost. This study focuses on a review study of the existing technologies …

Improving Intersection Safety With Geographically-Targeted Crash Prediction Models In Utah, Atul Subedi

Student Research Symposium

This project aims to improve intersection safety in Utah by developing geographically-targeted crash prediction models. The lack of research investigating active mode crashes at signalized intersections in different geographical regions calls for this study. The objective of this research is to understand the factors associated with the frequency of active mode crashes at signalized intersections. Exposure variables such as AADT, pedestrian and bicycle volumes, and intersection-level variables such as crossing distance, speed limit, and presence of street lights were analyzed using a negative binomial regression model.

A Unified Approach That Makes Online Taxi Service More Effective, Jiyao Li

Student Research Symposium

We propose a unified approach for scheduling taxis across a city. Balancing the supplies and demands on a city scale is a challenging problem in the field of online taxi services. To tackle the problem, we design a unified approach considering two important processes: Taxi-Rider Matching and Taxi Guidance. In the Taxi-Rider Matching, with the help of Lottery Selection (LS) and smoothed popularity score, the approach can balance supplies and demands well, both in the local neighborhood areas and hot places across the city. Regarding Taxi Guidance, we propose Q-learning Idle Movement (QIM) to direct vacant taxis to the most …

New Rocket Fuel Blend For Hybrid Rocket Ignition Enhancement, Ryan Thibaudeau

Student Research Symposium

This work describes and compares different methods of ignition for hybrid rockets using acrylonitrile butadiene styrene (ABS) as the fuel and high-test hydrogen peroxide (HTP) as the oxidizer. Additionally, the work provides an overview of the current state of the art regarding ignition of HTP hybrid rockets. The approach to ignition methods using gaseous oxygen (GOX) pre-lead and catalytic ignition configurations are presented. The manufacturing process and testing results of a unique catalyst-infused fuel grain is presented as the optimal solution to overcome ignition latencies present in HTP-ABS hybrid rockets.

Understanding And Minimizing The Effects Of Propellant Mean Bulk Temperature Changes In Solid Rocket Motors, Thomas Sorensen

Student Research Symposium

Solid rocket propellant typically contains the geometry of an extruded annulus. This propellant, when ignited, burns radially at a rate called the “burn rate”. This rate dramatically affects important motor performance characteristics such as pressure, thrust, and specific impulse. Each different mixture of solid rocket propellant has a sensitivity to initial propellant temperature. The relationship between burn rate and initial temperature sensitivity function are each determined experimentally. This literature review will analyze existing experimental data. The objective of the research is to see if there is a reliable way to predict the burning rate’s temperature sensitivity prior to obtaining new …

Reclaiming Fault Resilience And Energy Efficiency With Enhanced Performance In Low Power Architectures, Noel Daniel Gundi

Student Research Symposium

Shrinking technology node and the massive increase in data workloads has witnessed a swift migration of the system towards the Low-Power Computing (LPC) paradigm. Additionally, to accelerate the redundant yet mammoth AI instructions, novel ASIC design architectures have been explored. Google’s Tensor Processing Unit (TPU) is one such architectural innovation deployed in the commercial space to speedup the processing of AI workloads. In an effort to achieve a superior energy efficiency, Near-Threshold Computing (NTC) has been marginalized to be an efficient LPC paradigm. Due to an underscaling of voltage, NTC offers quadratic savings is power consumption in comparison to operating …

Controlling Oxidizer-Fuel Ratio With Vortex Injection In Hybrid Rockets, Max Francom

Student Research Symposium

Hybrid motors have existed as a hypothetical propulsion system for decades in a wide range of upper stage rocket motors due to their simple, robust, non-toxic, and versatile nature. However, inherent to hybrids is oxidizer:Fuel ratio (O:F Ratio) shift over time, the elimination of which would remove many potential barriers to hybrid rocket motor usage in most spaceflight applications. The most important and difficult part of analytical models of hybrid rockets is the regression/combustion rate of hybrid fuel. O:F Ratio control is fully dependent on the ability to manipulate this regression independently of Oxidizer mass input. One potential method of …