Engineering Commons^™

Development Of A Potassium Permanganate Catalyst-Infused Fuel Grain For Hydrogen Peroxide Hybrid Thruster Ignition Enhancement, Ryan J. Thibaudeau

All Graduate Theses and Dissertations, Fall 2023 to Present

This thesis describes and addresses the need for reliable ignition in small satellite hybrid propulsion systems using hydrogen peroxide. It describes process of creating custom 3D printed ABS plastic fuel grains with small amounts of catalysts. These catalysts lead to a more reliable and energy-efficient ignition of a hybrid rocked propulsion system using catalyst-infused ABS and high-test hydrogen peroxide (HTP). Hydrogen peroxide is a high-density oxidizer and therefore more volumetrically efficient for a small satellite using hybrid rocket technology when compared to gaseous oxygen (GOX). The traditional ignition methods of hybrid rocket propulsion systems using HTP are compared to and …

Estimated Aerodynamic Forces And Moments And Optimal Orientation Of The V-Bat Airframe During Vertical Landing In Gusty Conditions, Parker C. Carter

All Graduate Theses and Dissertations, Fall 2023 to Present

Ship based Unmanned Air Systems (UAS) are an important tool used by the United States Navy for situational awareness and short-range operations. Naval UAS are used to provide real-time intelligence, surveillance, reconnaissance, and target-acquisition while being low cost, mission flexible, and safe. Unfortunately UAS suffer disadvantages with respect to adverse environmental conditions caused by the air being displaced by the ship. The accumulation of one or more adverse conditions is known as airwake. To counteract the effects of airwake, the objectives of this work are to first evaluate the effect of forces and moments during the vertical landing phase of …

In-Situ Optical Measurements Of High Temperature Combustion Plumes, Cara Frischkorn

All Graduate Theses and Dissertations, Fall 2023 to Present

Rocket motors are critical to the human exploration of space and to the United States missile defense systems. The design and manufacturing of these motors requires extensive simulation and testing to assure the motors will perform as intended and to minimize safety risks. Taking data from inside the rocket motors during tests is extremely difficult due to the intense temperatures inside the motor as it burns; most instrumentation cannot survive in this environment. The research discussed in this thesis aims to develop an instrumentation system composed of a fiberoptic cable which conducts light from the interior of a rocket motor …

Cost Minimizing Energy Management Control Scheme For Microgrids Considering Dynamic Electricity Prices, Levi T. Miller

All Graduate Theses and Dissertations, Fall 2023 to Present

As countries develop and technology improves, the world is using more energy than ever before. This fact along with several other political, social, and economic factors has resulted in simultaneous energy and climate crises. A partial solution to both problems is bringing clean energy sources of electricity closer to the customers who use that energy. A microgrid is a smaller version of the national electric grid where smaller electricity generators are networked with local consumers and controlled independently of the main grid. Because control of electricity sources and loads are transferred to local controllers, the flexibility with which they can …

Virtual Structures Based Autonomous Formation Flying Control For Small Satellites, Tyson K. Smith

All Graduate Theses and Dissertations, Fall 2023 to Present

Many space organizations have a growing need to fly several small satellites close together in order to collect and correlate data from different satellite sensors. To do this requires teams of engineers monitoring the satellites orbits and planning maneuvers for the satellites every time the satellite leaves its desired trajectory or formation. This task of maintaining the satellites orbits quickly becomes an arduous and expensive feat for satellite operations centers. This research develops and analyzes algorithms that allow satellites to autonomously control their orbit and formation without human intervention. This goal is accomplished by developing and evaluating a decentralized, optimization-based …

Surface Water Hydrology Within The Great Salt Lake Basin, Madeline F. Merck

All Graduate Theses and Dissertations, Fall 2023 to Present

The Great Salt Lake (GSL) and its tributaries are ecologically and economically important resources for Utah. It is a highly saline lake, with salinity that is several times saltier than the ocean. Lake uses are heavily influenced by its salinity and lake level and, similarly, river uses by its streamflow quantity. Currently, the GSL Basin is experiencing changes that affect tributary inflows, lake level, and salinity. For my dissertation and in support of better lake management, I addressed important gaps in our understanding of the lake and the changes it is undergoing.

Chapter 2 is an examination of the distribution …

Effects Of Indole Derivative Idc16 On Cell Proliferation, Transfection, And Alternative Splicing In Production Of Lentiviral Vectors By Transient Co-Transfection, Nataly Mier

All Graduate Theses and Dissertations, Fall 2023 to Present

Viruses can efficiently introduce genetic material into a variety of cells through cell infection. Therefore, viral vectors, defined as virus-based gene delivery systems, effectively transfer functional gene constructs to target cells. Among different viral vectors, lentiviral vectors are of interest due to the advantages offered to research and therapeutic applications. Low productivity of lentiviral vectors in mammalian producer cells and high production cost, however, remain barriers to the vectors’ routinary use, particularly in clinical settings.

Since most lentiviral vectors are derived from human immunodeficiency virus type I, their genome has been engineered to increase safety. Nevertheless, modifications of the lentiviral …

Subjective Wellbeing Of Undergraduate Engineering Students: A Mixed Methods Study, Muhammad Asghar

All Graduate Theses and Dissertations, Fall 2023 to Present

In higher education, the prevalence of mental health issues among students has raised concerns regarding their overall success and wellbeing. While existing research often focuses on identifying and addressing mental health problems, there is a lack of emphasis on understanding the positive contributors to students' mental health. In this study, I expand the concept of mental health beyond the absence of negative mental health states to include the presence of positive mental health aspects through the concept of Subjective Wellbeing (SWB) (feeling that your life is going well, not badly), of engineering undergraduate participants. Both qualitative and quantitative data were …

Comparing Scaling Approaches To Estimate Unimpaired Streamflow Timeseries And Seasonal Flow Metrics At Ungauged Streams, Karl Christensen

All Graduate Theses and Dissertations, Fall 2023 to Present

River ecosystems are controlled in part by natural variation in the flow regime and streamflow alterations that impair these natural variations often have negative impacts for aquatic species. Flow metrics describing attributes of the natural flow regime can inform environmental water management goals to maintain and restore river ecosystems by mirroring critical aspects of the natural flow regime. However, unimpaired daily streamflow data needed to calculate these flow metrics is not always readily available. Statistical scaling approaches present an opportunity to estimate unimpaired flow metrics at ungauged locations to better address environmental water management objectives. This study evaluates a suite …

Understanding The Effects Of A Mobile Flow Visualization Learning Tool On Engineering Undergraduate Interest In Fluid Mechanics, Lori M. Openshaw

All Graduate Theses and Dissertations, Fall 2023 to Present

Fluid mechanics is a difficult engineering course that tends to act as a weed-out course for undergraduate students. Despite this, fluid mechanics is critical, with related careers in disciplines such as Mechanical, Aerospace, Civil, Environmental, Biological, Ocean, and Naval engineering. Within these fields, there is a lack of graduates with sufficient fluid mechanics knowledge to fill the available positions. One solution to this career pipeline is to increase student interest and understanding of fluid mechanics.

Efforts to make fluid mechanics more interesting and easily understood include curricular changes such as emphasizing historical aspects of fluids, computer simulations that model complex …

Quantifying The Effect Of Stable Stratification On Low-Reynolds Number Flow Past A Horizontal Cylinder, Holland Kartchner

All Graduate Theses and Dissertations, Fall 2023 to Present

In this research, we study the behavior of flow around a cylinder in the presence of stable stratification, which refers to variations in density throughout the fluid. This phenomenon is observed in natural and industrial settings. We use computer simulations to analyze how stratification affects the flow patterns created by the cylinder. Specifically, we investigate situations where the stratification is perpendicular to the flow direction, and the wake exhibits two-dimensional characteristics. We use spectral-element method based computational fluids dynamics to simulate the phenomena. During the simulations, we vary two important parameters: the Densimetric Froude Number (Fr) and the …

Molecular Dynamics Simulations Of The Spontaneous Deformation And Auxetics Behavior During Tensile Test Of A Nematic Liquid Crystal Elastomer Model, Haoran Wang, Nanang Mahardika

Browse all Datasets

Nematic liquid crystal elastomers (LCEs) are advanced materials known for their shape-changing capability in response to external stimuli such as heat, light and electromagnetic fields. This makes them excellent candidates for applications like soft robotics and energy harvesting. While studies on their physical behavior have shed light on the complex nonlinear mechanics of LCEs, investigations through all-atom molecular dynamics (MD) simulations remain an underutilized avenue compared to experimental and theoretical analyses. This limited use is primarily due to the lack of well-established frameworks for conducting high-fidelity atomistic simulations of LCEs. To bridge this gap, we introduce an all-atom MD simulation …

Dynamics And Scaling Of Particle Streaks In High-Reynolds-Number Turbulent Boundary Layers, Tim Berk, Filippo Coletti

Mechanical and Aerospace Engineering Faculty Publications

Inertial particles in wall-bounded turbulence are known to form streaks, but experimental evidence and predictive understanding of this phenomenon is lacking, especially in regimes relevant to atmospheric flows. We carry out wind tunnel measurements to investigate this process, characterizing the transport of microscopic particles suspended in turbulent boundary layers. The friction Reynolds number Re_𝜏 = O(10⁴) allows for significant scale separation and the emergence of large-scale motions, while the range of viscous Stokes number St⁺ = 18–870 is relevant to the transport of dust and fine sand in the atmospheric surface layer. We …

Usu Army Rotc Cannon Assessment, Annalyn Jensen, Emma Sharp, Hunter Esplin, Spencer Fairbanks, Tannon Merrill

Biology Student Research

An assessment was conducted by students from the USU Industrial Hygiene Program on November 11th, 2023, to determine the noise exposure of USU Army ROTC Cadets involved in firing a 75 mm howitzer cannon at home football games. The assessment utilized personal dosimetry and sound level mapping to measure peak noise (Lzpk), average noise level (Lavg), and time-weighted average (TWA) levels. Findings indicate that two of the sampled Cadets were exposed above the Department of Defense (DOD) peak noise exposure limit and all three exceeded Lavg limits. The given recommendations include continuing the use of hearing protection devices (HPDs) and …

Towards A Virtual Test Framework To Predict Residual Compressive Strength After Lightning Strikes, Scott L.J. Millen, Xiaodong Xu, Juhyeong Lee, Suparno Mukhopadhyay, Michael R. Wisnom, Adrian Murphy

Mechanical and Aerospace Engineering Faculty Publications

A novel integrated modelling framework is proposed as a set of coupled virtual tests to predict the residual compressive strength of carbon/epoxy composites after a lightning strike. Sequentially-coupled thermal-electric and thermo-mechanical models were combined with Compression After Lightning Strike (CAL) analyses, considering both thermal and mechanical lightning strike damage. The predicted lightning damage was validated using experimental images and X-ray Computed Tomography. Delamination and ply degradation information were mapped to a compression model, with a maximum stress criterion, using python scripts. Experimental data, in which artificial lightning strike and compression testing were performed, was used to assess the predictive capabilities …

On Quantifying Uncertainty In Lightning Strike Damage Of Composite Laminates: A Hybrid Stochastic Framework Of Coupled Transient Thermal-Electrical Simulations, R. S. Chahar, J. Lee, T. Mukhopadhyay

Mechanical and Aerospace Engineering Faculty Publications

Lightning strike damage can severely affect the thermo-mechanical performance of composite laminates. It is essential to quantify the effect of lightning strikes considering the inevitable influence of material and geometric uncertainties for ensuring the operational safety of aircraft. This paper presents an efficient support vector machine (SVM)-based surrogate approach coupled with computationally intensive transient thermal-electrical finite element simulations to quantify the uncertainty in lightning strike damage. The uncertainty in epoxy matrix thermal damage and electrical responses of unprotected carbon/epoxy composite laminates is probabilistically quantified considering the stochasticity in temperature-dependent multi-physical material properties and ply orientations. Further, the SVM models are …

Microbial Glycosylation Of Antitubercular Agent Chlorflavonin, Jie Ren, Jixun Zhan

Biological Engineering Faculty Publications

Flavonoids have shown health-benefiting properties, such as antioxidative and anti-inflammatory activities, and are commonly used as nutraceuticals and pharmaceuticals. Although flavonoids are predominantly identified from plants, several filamentous fungal species have also been reported to produce bioactive flavonoids, including chlorflavonin from Aspergillus candidus, a novel halogenated flavonoid with potent antifungal and antitubercular (anti-TB) activities. Unfortunately, the low water-solubility of this molecule may hinder its bioavailability. Glycosylation is an effective method to enhance the polarity of natural products and alter their physicochemical properties. This work focuses on the development of novel water-soluble chlorflavonin derivatives to combat the threat of drug-resistant …

Development Of Surrogate-Optimization Models For A Novel Transcritical Power Cycle Integrated With A Small Modular Reactor, Yili Zhang, Jacob Bryan, Geordie Richards, Hailei Wang

Mechanical and Aerospace Engineering Student Publications and Presentations

In recent years, various types of surrogate optimization models have been proposed to reduce the computational time and to improve the emulation accuracy. In this study, by leveraging an ANN surrogate model developed earlier, a comprehensive and efficient optimization algorithm is conceived for the global optimal design of an integrated regenerative methanol transcritical cycle. It combines a unique converging/diverging classifier model into the surrogate model to form a surrogate-based model, which significantly improves the prediction accuracy of the objective function. Six binary classifiers are explored and the multi-layer feed-forward (MLF) neural network classifier is selected. In addition, within the five …

Microstructural Characterization Of The Transition In Ss316l And In625 Bimetallic Fabricated Using Hybrid Additive Manufacturing, Christopher J. Bettencourt, Nadia Kouraytem

Mechanical and Aerospace Engineering Faculty Publications

Nearly all energy technologies utilize heat exchangers and recuperators within the power cycle. To further improve the cost-effectiveness of recuperators, costly high temperature Inconel 625 superalloy was substituted with a more affordable Stainless Steel 316L to be used at the low-temperature side of the heat exchanger. Bimetallic samples for analysis and examination were fabricated by combining Laser Powder-bed Fusion and Directed Energy Deposition. Two transition strategies for joining to the laser powder-bed fusion steel were explored, namely, a direct transition and an intermediate layer of 50% nickel powder mixed with 50% steel powder through Directed Energy Deposition. The microstructure and …

Bending Performance And Failure Mechanisms Of Hybrid And Regular Sandwich Composite Structures With 3d Printed Corrugated Cores, S.Z.H. Shah, Khurram Altaf, Juhyeong Lee, Tahir Sharif, Rizwan Saeed Choudhry, S. M. Hussain

Mechanical and Aerospace Engineering Faculty Publications

The effect of core geometry and hybridization on the bending performance and failure mechanisms of carbon fibre-reinforced polymer (CFRP) and glass fibre-reinforced polymer (GFRP) corrugated sandwich composite structures (SCS) were experimentally investigated using a three-point bend test. The CFRP and GFRP corrugated cores and facesheets were produced using Fused Filament Fabrication (FFF) and vacuum-assisted infusion processes, respectively. Three types of corrugated SCSs were built: SCSs with different core geometries (circular, square, trapezoidal, sinusoidal, and triangular), hybrid SCSs with different CFRP and GFRP cores and facesheets, and fully 3D-printed CFRP and GFRP SCSs. The corrugated SCS with square core geometry outperformed …

Surface-Functionalized Silica Nanocarriers For Mitigating Water Stress In Wheat And Benefiting The Root Microbiome, Anthony Cartwright

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Changes in climate and shifting patterns of drought threaten the growth of important cash crops like wheat. The element silicon serves as a plant nutrient and shows promise for strengthening wheat against drought while remaining safe to both the crop and the positive bacteria that grow on its roots. Silicon can be added to wheat in the form of silicon-dioxide nanoparticles featuring protective coatings made from plant-beneficial nutrients. These nanoparticles can be engineered with high surface area or porous structures allowing them to be loaded with additional nutrients that can be delivered to crops. In a laboratory setting, such nanoparticles …

Exploring Versatile Glycosyltransferases From Microorganisms For Natural Product Biosynthesis, Jie Ren

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This dissertation is mainly focused on exploring versatile glycosyltransferases from different microorganisms with the purpose of biosynthesizing bioactive natural product glycosides through microbial fermentation. This engineered biosynthesis approach is environmentally friendly, safe, and efficient compared with plant extraction, chemical synthesis, and enzymatic synthesis. Additionally, we applied these characterized glycosyltransferases as efficient biocatalytic tools to produce novel glycosides to expand the chemical repertoire of nature. These novel compounds showed improved water solubility and some of them exhibited enhanced stability and biological activity, which laid the foundation for the development of new therapeutic agents.

In my dissertation research, I have discovered two …

Development Of Large-Scale Pseudo-3d Shear Wave Velocity Models At The Garner Valley Downhole Array Site, Isabella Corey

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

In order to design structures that can withstand anticipated earthquake loads, it is first necessary to understand the behavior of the subsurface when subjected to ground motions. To achieve this, different models and approaches have been proposed in recent decades, each with the aim of estimating how site-specific stratigraphy can amplify and/or scatter seismic waves. All of these methods require, to varying extents, information about the types of soil layers, their thickness, their stiffnesses (represented by a shear wave velocity profile), and lateral variability across the site. This last characteristic is often both difficult and costly to determine. Past research …

Developing Firmware For Space Weather Probes 2 Using Hdl Coder, Nicholas L. Wallace

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

GPS and wireless communications are affected by interference from the ionosphere. Space weather affects plasma in the ionosphere, causing communication disruptions and reliability issues. To better understand how space weather affects the ionosphere, instruments are flown in space to collect data about the electrical characteristics of plasma in the ionosphere. Space systems require a lot of time and effort to develop and test. This thesis explores how a high level tool can be used to simplify the process and some obstacles that still exist with developing some space systems. To do this, the firmware architecture of a new version of …

A Cohesive Simulation And Testing Platform For Civil Autonomous Aerial Sensing And Operations, Stockton G. Slack

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Drones (also known as sUAS or small Uncrewed Aerial Systems) are often flown with cameras to take images of an area of land. These images can then be used to create a map by stitching these images together. This map can then be analyzed using scientific principles to learn things about the land and make decisions or take action based on the information.

The scientific application of drones is very advantageous, but flying a drone is inherently dangerous, impacting the safety of the airspace (particularly in the event of a crash), and drones are more dangerous the bigger they are. …

Cislunar Navigation Techniques And Navigation Performance Optimization, Quinn P. Moon

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Nova-C is a lunar lander developed by the private company Intuitive Machines to deliver commercial payloads to the Moon. The IM-1 mission set for 2023 will launch and land the Nova-C near the Moon's south pole. In this research, various navigation techniques are explored to determine the lander's position and velocity during key segments. This process is studied for key mission events including trajectory correction maneuvers (TCMs), lunar orbit insertion (LOI), and descent orbit insertion (DOI). Each mission segment, referred to as an Orbit Determination Segment (OD), is analyzed with three different navigation techniques: Monte Carlo Analysis, Linear Covariance Analysis, …

A Scalable, Cost-Oriented Approach For Computing Charge Plans For Electric Bus Fleets, Daniel T. Mortensen

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Recent attention for reduced carbon emissions has pushed transit authorities to adopt battery electric buses (BEBs). One challenge experienced by BEB users is extended charge times, which create logistical challenges and may force BEBs to charge when energy is more expensive. Furthermore, BEB charging leads to high power demands, which can significantly increase monthly power costs and may push electrical infrastructure beyond its present capacity, requiring expensive upgrades. This work presents a novel method for minimizing the monthly cost of BEB charging while meeting bus route constraints. This method extends previous work by incorporating a more novel cost model, effects …

Super-Resolution Textured Digital Surface Map (Dsm) Formation By Selecting The Texture From Multiple Perspective Texel Images Taken By A Low-Cost Small Unmanned Aerial Vehicle (Uav), Bikalpa Khatiwada

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Textured Digital Surface Model (TDSM) is a three-dimensional terrain map with texture overlaid on it. Utah State University has developed a texel camera which can capture a 3D image called a texel image. A TDSM can be constructed by combining these multiple texel images, which is much cheaper than the traditional method. The overall goal is to create a TDSM for a larger area that is cheaper and equally accurate as the TDSM created using a high-cost system.

The images obtained from such an inexpensive camera have a lot of errors. To create scientifically accurate TDSM, the error presented in …

Development Of The Digital Signal Processing For The Space Weather Probes Version 2 Sensor Using The Matlab/Simulink Environment, Benjamin J. Lewis

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Space Weather Probes (SWP) is an instrument that provides measurements of the plasma environment of the ionosphere. SWP was flown on the Scintillation Prediction Observation Task (SPORT) mission, a joint mission between the United States of America and Brazil. This thesis will develop the digital signal processing (DSP) hardware design for the Space Weather Probes version 2 (SWP2). The data from these instruments will be used to determine the density and temperature of the local plasma, as well as the electric field in the local plasma. This thesis presents the design and testing of the DSP designs for all of …

Laboratory Measurements At The Impact Point Of A Falling Jet, Garrett Richins

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Dams and spillways play a vital role in managing water resources. Many of these hydraulic structures feature a falling jet when discharging downstream. Engineers design plunge pools to receive jets with enough water depth or a protective liner to protect the river bottom so that scour is avoided. Quantifying the pressures at the bottom of the falling jet is a key component to determining the potential for scour and the need for mitigation techniques.

In the laboratory setting, significant discrepancies have been observed between different measurement methods to measure mean and fluctuating pressures of a falling jet intercepting a solid …