Engineering Commons^™

Hybrid Sulfur Process For Solar Production Of Hydrogen, John Jacob Isenhower, Katherine Cross Henderson, Nicholas Joseph Eigenbrot

Senior Theses

Lowering dependence on fossil-based fuels has become a major area of focus in research, especially in transportation fuels. One particularly interesting field is that of hydrogen production. Hydrogen is promising because it has the potential to emit no greenhouse gases when used as fuel and is an excellent vessel for energy storage. Because traditional methods for its generation are inefficient and require nonrenewable fuel use, researchers have begun to focus on thermochemical cycles.

Thermochemical cycles are systems that require heat transfer intrinsically and do not consume fossil fuels nor emit greenhouse gases if renewable energy is used for heating. The …

Thermal Stability And Crystallinity In Sputtered Scandia Stabilized Zirconia Thing Films, Patrick Mackenzie Barboun

Senior Theses

This senior thesis project studies the synthesis of solid oxide fuel cell electrolytes using magnetron sputtering. Materials used in bilayer electrolytes were studied individually for phase stability.

Next Generation Electrode, Joseph Daniel Bivona, Samuel Scott Dacus, Mary Harrell, James Frederick Weber Pike

Senior Theses

This senior thesis involves the results of a biomedical engineering senior design project where the group worked with Rhythmlink International LLC. The project involved the improvement of the manufacturing process of the Invisa Electrode, a CT compatible electrode sold and manufactured by Rhythmlink. The design of the electrode pin was altered to have a hollow center, where the lead wire can be inserted and heat welded, eliminating two key components of the original design and reducing production time and cost. The type of plastic used in the electrodes was also altered to be a 40% carbon loaded conductive plastic.

Ubisol-Q10 Prevents Glutamate-Induced Cell Death By Blocking Mitochondrial Fragmentation And Permeability Transition Pore Opening, Santosh Kumari, Suresh L. Mehta, Gaolin Z. Milledge, Xinyu Huang, P Andy Li

Faculty Publications

Mitochondrial dysfunction and oxidative stress are the major events that lead to the formation of mitochondrial permeability transition pore (mPTP) during glutamate-induced cytotoxicity and cell death. Coenzyme Q10 (CoQ10) has widely been used for the treatment of mitochondrial disorders and neurodegenerative diseases. Comparing to traditional lipid-soluble CoQ10, water soluble CoQ10 (Ubisol-Q10) has high intracellular and intra-mitochondrial distribution. The aims of the present study are to determine the neuroprotective effects of Ubisol-Q10 on glutamate-induced cell death and to explore its functional mechanisms. HT22 neuronal cells were exposed to glutamate. Cell viability was measured and mitochondrial fragmentation was assessed by mitochondrial imaging. …

Ray-Based Statistical Propagation Modeling For Indoor Corridor Scenarios At 15 Ghz, Qi Wang, Bo Ai, David W. Matolak, Ruisi He, Xin Zhou

Faculty Publications

According to the demands for fifth-generation (5G) communication systems, high frequency bands (above 6 GHz) need to be adopted to provide additional spectrum. This paper investigates the characteristics of indoor corridor channels at 15 GHz. Channel measurements with a vector network analyzer in two corridors were conducted. Based on a ray-optical approach, a deterministic channel model covering both antenna and propagation characteristic is presented. The channel model is evaluated by comparing simulated results of received power and root mean square delay spread with the corresponding measurements. By removing the impact of directional antennas from the transmitter and receiver, a path …

High Temperature Electrochemical Engineering And Clean Energy Systems, Brenda L. Garcia-Diaz, Luke Olson, Michael Martinez-Rodriguez, Roderick Fuentes, Hector Colon-Mercado, Josh Gray

Journal of the South Carolina Academy of Science

Global power demand is projected to more than double by 2050 and meeting this increased power demand will require maintaining or increasing power output from all existing energy sources while adding a large amount of new capacity. The power sources that have the greatest opportunity to fulfill this demand gap over this time period are clean energy sources including solar and nuclear power. One of the areas of expertise that SRNL has been applying to help with a variety of clean energy technologies is in high temperature electrochemistry. Savannah River National Laboratory (SRNL) in collaboration with industrial and university partners …

Therapeutic Potential Of Catechins And Derivatives For The Prevention Of Alzheimer’S Disease, Shelby Elaine Chastain

Theses and Dissertations

Alzheimer’s disease (AD) is a neurodegenerative condition that affects 1 in 9 people over the age of 65, an estimated 5.4 million Americans. It is the only disease among the top 10 that cannot be prevented, cured, or treated. Based on the lack of a viable therapeutic for the prevention or cure of AD, it is vital that therapeutic research for AD continues. AD is characterized by the deposition of extracellular neuritic plaques comprised of insoluble amyloid-β (Aβ) fibrils. These plaques are formed from the amyloidogenic aggregation of Aβ monomer, generated from the cleavage of the amyloid precursor protein (APP) …

The Application Of Lean Six Sigma To Improve A Business Process: A Study Of The Order Processing Process At An Automobile Manufacturing Facility, Sherrian Francina Ellis

Theses and Dissertations

The objective of this study is to explore the application of Lean Six Sigma to determine root causes of process inefficiency and make recommendations for improving the order processing process at an automobile manufacturing facility. State of the art process quality improvement initiatives Lean, Six Sigma, and Lean Six Sigma are used to explore literature and provide a strong theoretical background for this study. Since the study utilizes both quantitative and qualitative data, the study’s methodological approach is classified as mixed methodology. The study is empirical in nature, and single case study is strategy chosen to complete the study. The …

Use Of Biochar-Ultrafiltration Membrane Processes For Removal Of Humic Acid, Vaibhavi Shankar

Theses and Dissertations

The performance of an ultrafiltration (UF)-biochar process was evaluated in comparison with a UF membrane process for the removal of humic acid (HA). Bench-scale UF experiments were conducted to study the rejection and flux trends under various hydrodynamic, pH, conductivity, and pressure conditions. The resistance-in-series model was used to evaluate the processes and it showed that unlike stirred conditions, where low fouling resistance was observed, comparable trends were obtained for UF-biochar and UF alone for unstirred conditions. Thus, the processes were further evaluated under unstirred conditions. Additionally, total fouling resistance was decreased in the presence of biochar, indicating that HA …

Friction Stir Welding And Processing On Titanium Alloys, Dawei Li

Theses and Dissertations

Friction stir welding (FSW) is a solid-state joining process that utilizes a non-consumable, rotating tool to plunge into abutting faces and transverse along the weld path. Material nearby the tool is softened by frictional heat generated via local friction and plastic deformation. Severe plastic deformation of the interface along with a state of hydrostatic pressure results in creation of a joint by metallurgical bonding. Because the temperature of the material during the welding process is below that of the melting point, FSW has numerous advantages over conventional fusion welding. Friction consolidation (FC) is also a solid-state process that uses a …

Automated Image Analysis And Spatial Computational Modeling Of Nf-Kb In Cerebrovascular Endothelial Cells, Kasey Catalfomo

Theses and Dissertations

Cerebrovascular endothelial cells play a key part in the inflammatory response of the blood-brain barrier in pathological conditions such as Alzheimer’s disease. Specifically, the NF-κB signaling pathway plays a central role. Better understanding of the factors in inflammatory disease progression can lead to more effective treatments for such devastating illnesses like Alzheimer’s, asthma, arthritis, cancer, diabetes and many more inflammatory diseases. The proposed approach analyzes spatial NF-κB distribution contained in multispectral stacked micrograph images of cerebrovascular endothelial cells indexed based on dose of the activating protein and the length of activation. Image analysis code identifies the location of nuclear boundaries …

Characterization Of Human-Induced Vibrations, Benjamin Thomas Davis

Theses and Dissertations

In the US alone, 20% of citizens will be over the age of 65 by the year 2030, and the largest challenge facing this growing demographic is not a new disease but a simple motion - the fall. These events are the premier cause of fatal and nonfatal injuries. In fact, a fall is so common that every 17 seconds an older adult is treated for fall-related injuries, and every 30 minutes, an older adult dies from fall complications. Research has shown a positive outcome of a fall event is largely dependent on the immediate response (<30 minutes) and rescue of the person.

This work explores …

Modeling Radionuclide Diffusion Using Moose A Multiscale, Multiphysics Platform, Jonathon Gardner

Theses and Dissertations

Very durable ceramic waste forms have been proposed which offer longterm stability by binding certain radionuclides in their specific crystalline network. Moreover, multiple such ceramic phases can be tailored to contain specific radionuclides generated in the fuel cycle. Many such candidate ceramic forms are in the early stages of development with limited data. Modeling and simulation including modeling of diffusion can inform and provide direction to ongoing fabrication and experimental efforts. Material properties important in modeling can be obtained through laboratory measurement where available and atomistic simulation. Since diffusion occurs over multiple scales and follows multiple pathways, multiscale modeling is …

Detection Of Periodic Error And Structure Change Using Wavelet Analysis, Chao Lu

Theses and Dissertations

Heterodyne displacement measuring interferometry provides important metrology for applications requiring high resolution and accuracy. Heterodyne Michelson interferometers use a two-frequency laser source and separate the two optical frequencies into one fixed length and one variable length path via polarization. Ideally these two beams are linearly polarized and orthogonal so that only one frequency is directed toward each path. An interference signal is obtained by recombining the light from the two paths; this results in a measurement signal at the heterodyne (split) frequency of the laser source. This measurement signal is compared to the optical reference signal. Motion in the measurement …

Distributed Optimization And Control Of Islanded Microgrids, Md Rishad Hossain

Theses and Dissertations

A microgrid may have numerous multi-functional power electronic converters connecting sources, loads, and storage to the system. Systems where converters are the interface between many of the main sources of energy and load centers have the ability to direct the flow of energy if the control of the converters is coordinated. The influence of energy flow in a microgrid by coordinated action of converters is referred to here as ‘energy routing’. Energy routing allows for reduction of systems losses by optimizing source operating points and reducing transmission and distribution path losses. Energy ramp rates at various points in the system …

Development Of Novel High-Throughput Methodologies To Evaluate The Thermal Stability Of High-Temperature Thin-Film Crystals For Energy Applications, Jonathan Kenneth Bunn

Theses and Dissertations

High temperature materials are used in a variety of energy applications such as jet turbines, high temperature sensors, and solid oxide fuel cells (SOFCs). Discovery of new materials and their optimization represents a difficult engineering challenge, as the materials have to be designed to have a high figure of merit during intense high temperature operations.

The large number of engineering considerations involved in the identification and optimization of such materials makes traditional one-by-one material investigations prohibitively time consuming. The time needed to explore large parameter domains can be significantly decreased through the use of high-throughput experimentation (HTE). HTE is an …

Investigation Of Heterogeneous Chemistry Of Pollutants In Flue Gas For Air And Oxy-Combustion, Benjamin D. Galloway

Theses and Dissertations

Due to increasing concerns associated with the emissions created from the combustion of coal, technologies are being modified or developed to limit many of these harmful emissions. The content of this thesis will focus on two technologies and the specific pollutants they seek to limit. The first investigated is selective catalytic reduction, which is utilized to decrease NO emissions. Due to the recent promulgation of the MATS regulations, focus has been on reducing the Hg emissions through the optimization of the SCR catalysts, making them bi-functional for NO reduction and Hg oxidation. The work presented here focuses on a novel …

Simulation Of Gan Based Mis Varactor, Bojidha Babu

Theses and Dissertations

This work deals with novel microwave switches based on III-Nitride varactors. RF switches, power limiters and other control devices are important components of various RF systems, such as wireless modules of laptops, tablets, cell phones etc., satellites communication systems, radars, multi-band wireless and aerospace communications, phased array antennas and so worth. Traditional RF switches are fabricated using pin diodes or MEMS, Si MOSFETs or GaAs HEMTs. These devices have a number of fundamental limitations. Si or GaAs based devices suffer from a low breakdown voltage and cannot handle high RF power. Pin-diodes require large forward currents and do not allow …

Applications Of Impedance Identification To Electric Ship System Control And Power Hardware-In-The-Loop Simulation, Jonathan Siegers

Theses and Dissertations

Recent advances in semiconductor technology, controls, and switching converter topologies have resulted in the increasing application of power electronics in power distribution systems. Power electronic enabled distribution systems have inspired a renewed interest in DC distribution architectures as an appealing alternative to traditional AC methods due to the significant performance and efficiency gains they offer. However, the notional power electronic based DC distribution system is a complex and extensively interconnected system consisting of multiple power converters. As a result, a number of system-level challenges related to stability arise due to interaction among multiple power converters. In addition, the power distribution …

Improving Cooling Tower Chemistry Control And Cost Savings Through Automation, Ryan Matthew Maxwell

Theses and Dissertations

Proper chemistry control of cooling towers reduces corrosion, biological growth, and precipitation of solids. Therefore, improving control can lead to increased equipment life, operating efficiency, and safety. Chemistry of cooling towers is highly dependent on loading, weather, and time. As such, cooling tower chemistry varies day to day and even hour to hour, requiring either continuous controls or large operating bands. Through automation, 24/7 monitoring and control can be achieved, allowing for deliberate operation within tight operating bands. As a direct result of automation water consumption has been reduced by 9.1 million gallons per year, CL-49 use has been reduced …

Revealing Malicious Contents Hidden In The Internet, Muhammad Nazmus Sakib

Theses and Dissertations

In this age of ubiquitous communication in which we can stay constantly connected with the rest of the world, for most of the part, we have to be grateful for one particular invention - the Internet. But as the popularity of Internet connectivity grows, it has become a very dangerous place where objects of malicious content and intent can be hidden in plain sight. In this dissertation, we investigate different ways to detect and capture these malicious contents hidden in the Internet. First, we propose an automated system that mimics high-risk browsing activities such as clicking on suspicious online ads, …

Learning Human Poses From Monocular Images, Xiaochuan Fan

Theses and Dissertations

In this research, we mainly focus on the problem of estimating the 2D human pose from a monocular image and reconstructing the 3D human pose based on the 2D human pose. Here a 3D pose is the locations of the human joints in the 3D space and a 2D pose is the projection of a 3D pose on an image. Unlike many previous works that explicitly use hand-crafted physiological models, both our 2D pose estimation and 3D pose reconstruction approaches implicitly learn the structure of human body from human pose data.

This 3D pose reconstruction is an ill-posed problem without …

Anisotropic Electrical Response Of Carbon Fiber Reinforced Composite Materials, Mohammad Faisal Haider

Theses and Dissertations

Composites materials are often subjected to multi-physical conditions in different applications where, in addition to mechanical loads, they also need to sustain other types of loads such as electrical currents. The multi-physical behavior of composites needs to be understood and analyzed to facilitate new multi-functional material design. An essential first step towards this goal is to understand how multi-physics properties depend on local details (e.g. micro-structure). Composite materials have heterogeneous electrical properties (carbon/epoxy) at the local level that can be different at the global level. To conduct the multi-physics study, the electrical signal is employed to the composite sample for …

Biodegradable Hybrid Tissue Engineering Scaffolds For Reconstruction Of Large Bone Defects, Danial Barati

Theses and Dissertations

Complex skeletal injuries and large bone fractures are still a significant clinical problem in US. Approximately 1.5 million Americans (veterans, their families, and civilians) every year suffer from bone loss due to traumatic skeletal injuries, infection, and resection of primary tumors that require extensive grafting to bridge the gap. The US bone graft market is over $2.2 billion a year. Due to insufficient mechanical stability, lack of vascularity, and inadequate resorption of the graft, patients with traumatic large skeletal injuries undergo multiple costly operations followed by extensive recovery steps to maintain proper bone alignment and length. Current strategies for repairing …

Analysis Of Pellet Cladding Interaction And Creep Of U3si2 Fuel For Use In Light Water Reactors, Kathryn E. Metzger

Theses and Dissertations

Following the accident at the Fukushima plant, enhancing the accident tolerance of the light water reactor (LWR) fleet became a topic of serious discussion. Under the direction of congress, the DOE office of Nuclear Energy added accident tolerant fuel development as a primary component to the existing Advanced Fuels Program. The DOE defines accident tolerant fuels as fuels that “in comparison with the standard UO2- Zircaloy system currently used by the nuclear industry, can tolerate loss of active cooling in the reactor core for a considerably longer time period (depending on the LWR system and accident scenario) while maintaining or …

A Hierarchical Framework For Phylogenetic And Ancestral Genome Reconstruction On Whole Genome Data, Lingxi Zhou

Theses and Dissertations

Gene order gets evolved under events such as rearrangements, duplications, and losses, which can change both the order and content along the genome, through the long history of genome evolution. Recently, the accumulation of genomic sequences provides researchers with the chance to handle long-standing problems about the phylogenies, or evolutionary histories, of sets of species, and ancestral genomic content and orders. Over the past few years, such problems have been proven so interesting that a large number of algorithms have been proposed in the attempt to resolve them, following different standards. The work presented in this dissertation focuses on algorithms …

Deformation Of Multifunctional Materials At Various Time And Length Scales: A Dic-Based Study, Behrad Koohbor

Theses and Dissertations

The focus in the present work is to explore and characterize the underlying deformation and failure mechanisms in multifunctional materials including woven composites and polymeric foams, using full-field measurements. Attention has been especially drawn towards the challenges associated with characterizing these materials at extreme length and time scales, and investigating the advantages of full-field measurements to resolve the existing limitations. Accordingly, the current limitations in the study of dynamic deformation response of low-impedance materials are identified. An approach based on the general stress equilibrium is presented and successfully implemented to include the concurrent effects of inertia and material compressibility into …

High Gain Pattern Reconfigurable Antenna Arrays For Portable And Body-Centric Wireless Applications, Nowrin Hasan Chamok

Theses and Dissertations

Wireless devices such as smartphones, tablet computers, smartwatches etc. have become ubiquitous. With that, the demand for high speed data has increased tremendously. Designing antennas for such applications is challenging because of limited availability of space, shadowing or blockage from the human body, and signal loss from multipath fading. Conventional broad, fixed beam low gain antennas result in poor reception, faster battery drainage, and low data rate. Compressed footprint high gain pattern reconfigurable antenna arrays can solve these problems which is the focus of this dissertation. Two innovative high gain pattern reconfiguration techniques, the switched beam parasitic array and the …

Addressing The Impact Of Gavins Point Dam On The Lowermost~1400 Kilometers Of The Missouri River, Gregory Leaphart

Theses and Dissertations

The Missouri River originates in the Rocky Mountains in western Montana and joins the Mississippi River near St. Louis, Missouri. Beginning in the early 1900s, engineering efforts, such as dam construction, channel narrowing, and river alignment, were performed for flood control, navigational purposes, to use of water for agricultural and industrial needs, to produce hydroelectric power and the impounded lakes for recreation. These projects permanently altered the flow and sediment transport regimes in the river and the exchange of sediment with the surrounding floodplain. We focus on the long term effects of dam construction and channel narrowing on approximately the …

Engineering Model Of Iii-Nitride Power Heterostructure Field Effect Transistor On Silicon Substrate, Mohammad Mirwazul Islam

Theses and Dissertations

In modern society, the demand for power consumption is increasing rapidly and the need of energy savings is now an issue of global importance. Highly efficient power converters and power conditioning systems operating with wide range of traditional as well as novel renewable and clean energy sources, are playing crucial role in energy saving. Si converters have already reached their limitation in terms of switching frequency and breakdown voltage/on-resistance ratio. Research is going on all around the world and it is now well accepted that significant improvement in power conversion efficiency and speed can only be achieved using beyond Si …