Engineering Commons^™

Brain Motion And Deformation During Closed Head Injury In The Presence Of Cerebrospinal Fluid, Charles F. Babbs

Weldon School of Biomedical Engineering Faculty Publications

This paper presents a new analysis of the physics of closed head injury following brief, intense acceleration of the head. It focuses upon the buoyancy of the brain in cerebrospinal fluid, which protects against damage, the propagation of strain waves through the brain substance, which causes damage, and the concentration of strain in critical anatomic regions, which magnifies damage. Numerical methods are used to create animations or "movies" of brain motion and deformation. Initially a 1 cm gap filled with cerebrospinal fluid (CSF) separates the brain from the skull. Whole head acceleration induces artificial gravity within the skull. The brain …

Statewide Listing Of Bridges With Possible Historical Significance, Indiana Ltap

Indiana Local Technical Assistance Program (LTAP) Publications

This reports documents the efforts of the Indiana LTAP Center to create a statewide inventory of bridges that may be historically significant and was the first step in the development of a management plan for the preservation of the most significant historic bridges and a programmatic agreement in lieu of the standard Section 106 procedure for the less significant bridges.

Included in this report is a description of the work performed by Indiana LTAP, a description of the work to be performed by others as determined by the Historic Bridge Task Force, various summary tables and complete listings of the …

Low Reynolds Number Flow Through Nozzle-Diffuser Elements In Valveless Micropumps, Vishal Singhal, Jayathi Y. Murthy, S V. Garimella

CTRC Research Publications

Flow characteristics of low Reynolds number laminar flow through gradually expanding conical and planar diffusers were investigated. Such diffusers are used in valveless micropumps to effect flow rectification and thus lead to pumping action in one preferential direction. Four different types of diffuser flows are considered: fully developed and thin inlet boundary layer flows through conical and planar diffusers. The results from the numerical analysis have been quantified in terms of pressure loss coefficient. The variation of pressure loss coefficient with diffuser angle is presented for Reynolds numbers of 200, 500 and 1000. The pressure loss coefficients have been used …

Quantum Mechanical Analysis Of Channel Access Geometry And Series Resistance In Nanoscale Transistors, R. Venugopal, S. Goasguen, S. Datta, M. S. Lundstrom

Other Nanotechnology Publications

We apply a two-dimensional quantum mechanical simulation scheme to study the effect of channel access geometries on device performance. This simulation scheme solves the nonequilibrium Green’s function equations self-consistently with Poisson’s equation and treats the effect of scattering using a simple approximation inspired by Bu ̈ttiker. It is based on an expansion of the device Hamiltonian in coupled mode space. Simulation results are used to highlight quantum effects and discuss the importance of scattering when examining the transport properties of nanoscale transistors with differing channel access geometries. Additionally, an efficient domain decomposition scheme for evaluating the performance of nanoscale transistors …

A Highway Travel Information System: Forecasting And Publicizing Delays In The Indiana State Highway Network, Shu-Ling Yu, Jon D. Fricker

JTRP Technical Reports

The Highway Travel Information System (HTIS) is a long-term pre-trip information system providing information about expected events, such as road construction. The HTIS can be beneficial to both highway travelers and roadway project schedulers. Project schedulers can use the HTIS to check the forecasted traffic impacts of a proposed construction project schedule. If the schedule would cause unacceptable delays, a scheduler can try new schedules to reduce the delay. Travelers who have flexible schedules and would like to do pre-trip planning can obtain knowledge of traffic conditions in the near future from HTIS to avoid unnecessary delays. An approach called …

An Analysis Of Seismic Hazards In Indiana, Jennifer Haase, Robert Nowack, Chi Hyun Park, Alison Hunyar, John Hill, Michael Hamburger

JTRP Technical Reports

Current USGS probabilistic seismic hazard estimates (Frankel et al., 2002) show a higher seismic hazard in southwestern Indiana than for the rest of the state. This is expected based on past work documenting large pre-historic events in the Wabash Valley, and also based on isoseismal levels of shaking from the New Madrid 1811-1812 earthquakes. When assessing the hazard on a county by county basis, the local soil conditions produce amplification of shaking in regions with soft or unconsolidated sediments relative to firm-rock sites. We have reproduced the probabilistic seismic hazard calculation following the USGS methodology for the state of Indiana …

Continuation Of Research To Determine The Effectiveness Of Its On Borman Expressway, Robert Bertram Jacko, William H. Schneider, Ahmed S. Soliman, Barry K. Partridge

JTRP Technical Reports

This study is a continuation and the final phase of the SPR-2338 project that involves monitoring the ambient air quality levels adjacent to the Borman Expressway. The purpose of this phase was to classify the traffic conditions along the Borman Expressway in terms of ambient air quality levels. The duration of the phase was from April 1, 2002 to April 30, 2004. The study has shown that, in a close proximity to the Borman Expressway, air quality levels mirror the dynamic nature of traffic along the Borman, despite being surrounded by major industrial stationary sources. Therefore, a descriptive model was …

Development Of A Strategy For Preparing An Indot Storm Water Quality Management Plan, Lynn A. Corson

JTRP Technical Reports

The purpose of the study was to conduct research and prepare documents, data tables, reports and GIS maps to be included in the INDOT SWQMP that address each of the following Minimum Control Measures (MCMs) specified in the federal and state regulation: (1) public education and outreach; (2) public participation and involvement; (3) illicit discharge detection with elimination; (4) construction site runoff control; (5) post-construction runoff control and (6) pollution prevention and good housekeeping. The MCMs are minimum measures which, when implemented by INDOT, will ensure that storm water quality meets the minimum water quality standards. The research focused on …

Evaluation Of Surface (Top Down) Longitudinal Wheel Path Cracking, Terhi K. Pellinen, Geoff Rowe, Kalapi Biswas

JTRP Technical Reports

The research involved evaluating three surface cracked pavements during 2002 and 2003. A 500m section of I-65 North of Lafayette was chosen as the first site (designated as Site 1), an I-65 section in downtown Indianapolis was the second site (Site 2), and US-421 in Madison was the third site (Site 3). Site 1 had 11-year old pavement, Site 2 had 12-year old pavement and Site 3 had 4.5-year old pavement. All these sites exhibited longitudinal wheel path cracking which was later identified as top-down cracking. All sites had excellent structural capacity indicating that the top-down cracking was confined in …

Evaluation, Analysis, And Enhancement Of Indot's Utility Accommodation Policy, Carlos A. Arboleda, Hyung Seok Jeong, Dulcy M. Abraham, Sanjiv B. Gokhale

JTRP Technical Reports

The Utility Accommodation Policy (UAP) is a collection of the regulations and practices to control the utility occupancy of all public highway rights-of-way under jurisdiction of the different States. UAPs not only help to regulate the installation of new utilities and the renovation of the currently installed by construction companies, subcontractors, and utilities companies, but also provide a framework to develop and preserve a safe roadside and to minimize possible interferences and impairment to the highway, its structures, appearance, safe operation, construction and maintenance. According to FHWA (2002) “Present FHWA regulations, policies, and practices dealing with utility relocation and accommodation …

Evaluation Of Indot Construction Smoothness Specifications, Terhi K. Pellinen, Shao-Fan Chou

JTRP Technical Reports

Currently, Indiana Department of Transportation (INDOT) is using the California Profilograph as the standard measuring device in its smoothness specifications. The output derived from the profilograph is called Profile Index (PI). PI represents the total accumulated deviations of the profilograph output traces beyond a tolerance zone (blanking band). At present, INDOT is using 0.2-inch blanking band to evaluate the profile traces, which has raised some concerns because some small unpleasant surface irregularities are covered by the blanking band. The major objective of this study was to develop a rational method for interpreting profilograph traces using 0.0-inch blanking band (zero tolerance) …

Evaluation Procedures For Deploying Spread Spectrum Interconnect, J. V. Krogmeier

JTRP Technical Reports

This purpose of this project was the design and construction of a testbed network for experimentation with spread spectrum communications in the 900 and 2400 MHz band. The current network consists of five fixed nodes and two portable nodes. Of the fixed nodes, three are located in the Purdue MSEE building, one is located in the Harold L. Michael Traffic Operations Laboratory, and one is located in the experimental traffic signal cabinet at the intersection of Stadium and Northwestern Avenues in West Lafayette. The testbed has been used to evaluate spread spectrum radio technologies from vendors Microwave Data Systems, GINA, …

Implementation Of Full-Width Bridge Deck Panels: A Synthesis Study, Jose David Versace, J. A. Ramirez

JTRP Technical Reports

In this synthesis study, information related to full-depth precast deck systems has been collected and analyzed in order to facilitate implementation of full-depth precast deck systems in the state of Indiana. Nine full-depth precast deck systems were identified in the literature review. For girder bridges or similar, a full-depth precast, prestressed deck system (New England Region System) is recommended to be implemented. For bridges with decks spanning in the longitudinal direction, where no precast, prestress deck systems are available, the Exodermic™ Deck System is suggested to be implemented. This system is also an alternative to the New England Region System …

Innovative Environmental Management Of Winter Salt Runoff Problems At Indot Yards, James E. Alleman, Barry K. Partridge, Lee Yeung

JTRP Technical Reports

This INDOT-JTRP project examined an innovative strategy for mitigating, and possibly obviating, the environmental impact of wintertime salt release within INDOT yard areas specifically associated with the generation and release of salt truck wash waters, whereby these waste streams may be beneficially reused in the manufacture of salt brine solutions suitable for subsequent pre-wetting and anti-icing applications. The associated environmental problem stems from the fact that these wash waters carry high-level (e.g., from 100’s of mg/L to percentile-level) salt concentrations whose uncontrolled release via local surface or ground waters will have to be discontinued pursuant to the onset of tightened …

Interaction Between Micro-Cracking, Cracking, And Reduced Durability Of Concrete: Developing Methods For Considering Cumulative Damage In Life-Cycle Modeling, Zhifu Yang, W. Jason Weiss, J. Olek

JTRP Technical Reports

It is becoming increasingly popular to utilize numerical simulation models to predict the long-term performance of concrete pavements and structures. The majority of these models have been developed using laboratory test data that considers concrete in an uncracked state. While uncracked concrete exists as the best case scenario, frequent cracking occurs in real structures that could have a profound impact on life cycle performance. Cracks from several sources may accumulate and interact thereby accelerating the deterioration of concrete. For example, the distributed cracking caused by freeze/thaw damage can substantially increases the rate of water absorption and reduces the load carrying …

Mechanical Behavior Of Non-Textbook Soils (Literature Review), J. Antonio H. Carraro, Rodrigo Salgado

JTRP Technical Reports

Traditionally, soil mechanics has focused on the behavior of two distinct types of geomaterials: clean sands and pure clays. Under the application of external loads, these two types of geomaterials represent and are conveniently associated with two extreme types of soil responses: drained and undrained behavior. The drained behavior of clean sands and the undrained behavior of pure clays have been covered extensively in most soil mechanics textbooks. In order to provide some insight into the mechanical response of additional materials, a literature review on the mechanical behavior of “non-textbook” soils (i.e. soils other than clean sands and pure clays) …

Minimizing Truck-Car Conflicts On Highways, Srinivas Peeta, Weimin Zhou

JTRP Technical Reports

Trucks represent the predominant form of domestic freight movement. Due to the substantial increase in freight truck traffic on the nation’s highways, its influence on traffic flow performance, safety, and quality of travel experience, is garnering increased attention. Several existing studies have addressed the impacts of trucks on highway traffic flow conditions and crashes. This research models the behavior of non-truck drivers vis-à-vis their interactions with trucks by associating a “discomfort level” with every non-truck driver. This discomfort of non-truck drivers in the vicinity of trucks is assumed to be affected by situational factors such as time-of-day, weather, and ambient …

Methodology For The Development Of A Highway Asset Management System For Indiana, Zongzhi Li, Kumares C. Sinha

JTRP Technical Reports

Highway asset management is a systematic process that aims to preserve, expand, and operate highway assets in the most cost-effective manner. It is an analytical tool that facilitates organized, logical, and integrated decision-making in asset management practice. This study proposes a methodology for the development of a highway asset management system that addresses asset valuation, performance modeling, marginal benefit analysis, and multicriteria decision-making, including tradeoff analysis as well as project selection and programming. While most existing management systems deal with individual physical highway assets or system usage only under certainty or risk, this research focuses on the management of an …

Predicting Traffic Conditions At Indiana Signalized Intersections, Rafael I. Perez-Cartagena, Andrzej P. Tarko

JTRP Technical Reports

All of the methods for predicting traffic conditions at intersections provide default values for saturation flow rates and their adjustment factors, lost times, and other parameters. Because these parameters are difficult to measure, the use of the default values is a common practice and it can cause significant bias in the results if the actual local values are different. The main objective of this research was to investigate the variability of capacity and delay parameters used in engineering tools for predicting delays and for determining level of service (LOS) at signalized intersections in Indiana. The variability investigation produced Indiana default …

Constructability, Maintainability, And Operability Of Fiber Reinforced Polymer (Frp) Bridge Deck Panels, Makarand Hastak, Daniel W. Halpin, Taehoon Hong

JTRP Technical Reports

Recent advances in composite materials for civil engineering have created interesting possibilities for replacing conventional structural forms with components made out of fiber reinforced composite materials. Composite materials offer several advantages over conventional materials such as a superior strength/weight ratio, a better stiffness/weight ratio, a high degree of chemical inertness, and flexible custom design characteristics. Some of the potential down-stream benefits include lower life-cycle costs, lighter members, high corrosion and fatigue resistance, and higher live load capacity (Seible and Karbhari 1996). Composite materials are clearly having a major impact on how facilities are designed, constructed, and maintained. In order to …

Hazard Elimination Program - Manual On Improving Safety Of Indiana Road Intersections And Sections; Volume 1: Research Report And Volume 2: Guidelines For Highway Safety Improvements In Indiana, Andrzej P. Tarko, Mayank Kanodia

JTRP Technical Reports

The Hazard Elimination Program (HEP) is the section of the Safety Management System that focuses on road improvements and includes analytical tools for identification of safety problems and their remedies. This research project reviews the results of the past research for Indiana and other states and to develop guidelines that present a set of tools for hazard elimination through road improvements. It also includes developing regression models for predicting crash frequencies at all-way and two-way stop-controlled intersections. Negative Binomial regression was used to develop separate models for two-way and all-way stop controlled intersections. These models predict typical frequency of all …

Regionalization Of Indiana Watersheds For Flood Flow Predictions Phase I: Studies In Regionalization Of Indiana Watersheds, A. Ramachandra Rao

JTRP Technical Reports

The following five methods of regionalization of watersheds were tested with Indiana watershed and annual maximum flood data: (1) the L-moment based method, (2) the method based on hybrid cluster analysis, (3) the hybrid cluster method using rainfall data, (4) the fuzzy cluster method, and (5) the method based on artificial neural networks. The results of the L-moment based method and the hybrid cluster method with rainfall data were unacceptable because of the subjectivity involved with the former and the heterogeneity of the of the results obtained by the latter. The remaining three methods gave very similar results. The fuzzy …

The Development Of A Highway Tort Liability Management System For The Indiana Department Of Transportation, Thomas Giraud, Vorasett Chovichien, Samuel -1962 Labi, Kumares C. Sinha

JTRP Technical Reports

The loss of states’ sovereign immunity in the 1970’s opened the gates for highway-related tort liability suits against the states. Between January 2001 and September 2002, the State of Indiana investigated and settled hundreds of highwayrelated tort cases, involving several millions of dollars in taxpayers’ money. There is a need to assess the frequency of occurrence and financial impacts of such claims, and to examine how the growth of highway tort claims could be arrested. This study aimed at reviewing existing highway tort liability risk management practices at other states for possible applicability to INDOT, developing a framework for managing …

Upgrading The Indot Pavement Friction Testing Program, Shuo Li, Samy Noureldin, Karen Zhu

JTRP Technical Reports

This study investigated many important issues associate with pavement surface friction testing, in particular using the smooth tire. This study utilized 3-D FEM program to investigate the fundamental friction phenomenon in light of energy dissipation during friction process. It was demonstrated that the pavement friction depends on many factors such as test tire, test speed, surrounding conditions, pavement surface texture, and pavement type. A great amount of friction data has been collected so as to investigate variations involved in pavement friction measurements. System variations depend on the feature of pavement surface. The standard deviations due to system errors are usually …

Using Precast Concrete Panels For Pavement Construction In Indiana, Luh M. Chang, Yu-Tzu Chen, Sangwook Lee

JTRP Technical Reports

The closure of roadways for new pavement, overlays, or removal and replacement applications constantly causes traffic congestions. To minimize the effects of traffic congestions, the study is intended to assess the feasibility of using Precsat Concrete Pavement (PCP) method in INDOT pavement construction. The research investigated the state-of-the-art of the PCP methods lately developed in United States. The conventional concrete pavement methods such as Portland Cement Concrete Pavement (PCCP) including Jointed Plain Concrete Pavement (JPCP), Jointed Reinforced Concrete Pavement (JRCP), and Continuously Reinforced Concrete Pavement (CRCP) were reviewed and compared with PCP methods. With the speedy construction and lower user …

Administration And Management Of Local Roads And Streets 2004, Indiana Ltap

Indiana Local Technical Assistance Program (LTAP) Publications

This handbook begins by examining government officials’ authority to carry out their road and street work. Next is the ever important challenge of intergovernmental relations, becoming more routine, albeit challenging. Funding road and street efforts, inherent in the intergovernmental environment, and transportation planning follow. The chapter on right-of-way issues is varied and extensive because current topics are now often confrontational. The management chapter addresses such topics as managerial functions, training, and a number of related issues. The discussion then moves to the serious matter of risk management and transportation security, along with traditional tort liability topics, the imperative of transportation …

Life And Cost Comparison Of Three Rehabilitation Techniques On I-65 Between Sr-2 And Sr-114, Sedat Gulen, John Weaver, Samy Noureldin

JTRP Technical Reports

Construction of hot mix asphalt (HMA) overlays on top of old concrete pavements is the most common concrete pavement rehabilitation strategy. These overlays, however, are usually subject to reflection cracking related to the movement of the old concrete slab. In addition, these overlays may also be vulnerable to rutting when subjected to large traffic volumes of heavy trucks. Concrete overlays have the advantage of being rut resistant compared to HMA overlays. However, the current national experience of the performance of these overlays is still, relatively, limited compared to HMA overlays. In addition, doubts are often raised about the cost effectiveness …

Meta-Analysis Of Two-Treatment Clinical Trials Including Both Continuous And Dichotomous Results, Charles F. Babbs

Weldon School of Biomedical Engineering Faculty Publications

To expedite the timely creation of medical practice guidelines, a meta-analytic method was developed to combine of both dichotomous survival data and continuous physiologic data from multiple studies comparing the same innovative clinical intervention to standard care. The method is adapted for synthesis of small, early studies of novel treatments. An aggregate ratio, R*, of the observed treatment effect to a clinically optimal treatment effect for studies in a series is computed, and compared to the 95% confidence limit for R* under the null hypothesis. Weights assigned to each study may reflect its precision, quality, or clinical relevance. Input data …

High-Field Quasi-Ballistic Transport In Short Carbon Nanotubes, Ali Javey, Jing Guo, Magnus Paulsson, Qian Wang, Mark S. Lundstrom, Hongjie Dai, David Mann

Department of Electrical and Computer Engineering Faculty Publications

Single walled carbon nanotubes with Pd Ohmic contacts and lengths ranging from several microns down to 10 nm are investigated by electron transport experiments and theory. The mean-free path (MFP) for acoustic phonon scattering is estimated to be lap ~300  nm, and that for optical phonon scattering is lop ~15  nm. Transport through very short (~10  nm) nanotubes is free of significant acoustic and optical phonon scattering and thus ballistic and quasiballistic at the low- and high-bias voltage limits, respectively. High currents of up to 70   μA can flow through a short nanotube. Possible mechanisms for the eventual electrical breakdown …

A Three-Dimensional Quantum Simulation Of Silicon Nanowire Transistors With The Effective Mass Approximation, Jing Wang, Eric Polizzi, Mark S. Lundstrom

Department of Electrical and Computer Engineering Faculty Publications

The silicon nanowire transistor (SNWT) is a promising device structure for future integrated circuits, and simulations will be important for understanding its device physics and assessing its ultimate performance limits. In this work, we present a three-dimensional (3D) quantum mechanical simulation approach to treat various SNWTs within the effective-mass approximation. We begin by assuming ballistic transport, which gives the upper performance limit of the devices. The use of a mode space approach (either coupled or uncoupled) produces high computational efficiency that makes our 3D quantum simulator practical for extensive device simulation and design. Scattering in SNWTs is then treated by …