Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

New Jersey Institute of Technology

Discipline
Keyword
Publication Year
Publication
Publication Type

Articles 3691 - 3720 of 4264

Full-Text Articles in Engineering

Growth Patterns Of Bacteria In Pressurized Sewage, Dennis Mazzei May 1977

Growth Patterns Of Bacteria In Pressurized Sewage, Dennis Mazzei

Theses

Primary sewage was pressurized at 100 psi for one hour. The effects of this pressure on the growth patterns of general and nitrifying bacteria were examined daily for eighteen consecutive days using Standard Plate Counts and Most Probable Number (MPN) estimates. In conjunction with these tests, the degree of biodegradability was also determined by measuring both daily biochemical oxygen demands (BOD's) and dissolved oxygen levels.

Graphical analysis of experimental data compare the BOD's exterted [sic] by microorganisms to their respective numbers of colonies as determined by plate counts of both pressurized and non-pressurized sanitary sewage diluted to 3. 00%. The …


Ecuador And A Business Opportunity, Cesar Arturo Paredes Roldan May 1977

Ecuador And A Business Opportunity, Cesar Arturo Paredes Roldan

Theses

As a result of its recent status as a petroleum exporting country, Ecuador is enjoying an economic boom, which is expected to lead to the formation of new enterprises, the creation of jobs, the utilization of human and natural resources and the encouragement of harmonious development of the national economy.

This thesis is based on the belief that the private sector must assume a decisive role in the adequate implementation of Ecuador's industrial development programs, and it aims to show the feasibility of establishing there an enterprise that would manufacture domestic electric irons.

The coverage of the subject comprises three …


Thermal Decomposition Products Of Kynol And Nomex With Reference To Structure And Toxicity, Shaker H. El-Sherbini May 1977

Thermal Decomposition Products Of Kynol And Nomex With Reference To Structure And Toxicity, Shaker H. El-Sherbini

Theses

The purpose of this investigation was to study the combustion products of KYNOL and NOMEX as a fire retardant fibers. From the quantitative analysis data of the combustion products, the polymer structure is discussed and the property of thermal stability is explained.

From the analysis of the combustion products, the toxicity indices for the two fibers are determined. It is found to be 0.1 for KYNOL and 0.71 for NOMEX. This can be interpreted to mean that, if one gram of MIDI, is decomposed and the combustion products were diffused in one cubic meter of air, the probability of dying …


The Anisotropic And Isotropic Strength Behavior Of An Illitic Clay, Miles M. O'Brien May 1977

The Anisotropic And Isotropic Strength Behavior Of An Illitic Clay, Miles M. O'Brien

Theses

The cause and the nature of anisotropy in a cohesive soil was investigated by direct shear and triaxial compression tests. Laboratory techniques and procedures used to prepare isotropic clay samples are given where consolidation was accomplished under hydrostatic pressure. Direct shear tests were performed on these specimens trimmed at different inclinations to the physical horizontal from the block samples. The ratio of undrained shear strengths in any direction to shear strength in the vertical direction was found to be equal to one, proving isotropy existed. Similar tests were performed on specimens trimmed from the same clay consolidated one-dimensionally. Results from …


Dynamics Of The Glucose-Insulin-Glucagon System, Joseph P. Hartmann May 1977

Dynamics Of The Glucose-Insulin-Glucagon System, Joseph P. Hartmann

Theses

A computer model for the Dynamics of the Glucose-Insulin-Glucagon System has been developed for a 17.5 kg canine using the Continuous Systems Modeling Program (CSMP) for the 360 Computer System. The major body components controlling the glucose dynamics (liver, pancreas, body muscle, blood flow, and body fluid compartments) have been modeled in terms of either their production, absorption, or transport of glucose, and the concentration levels of both the hormones and substrates perfusing the body component. A set of mneumonics has also been developed to label the hundreds of constant and variable terms required to describe a complex system of …


Vapor-Liquid Equilibrium At Low Pressures : Correlation Of Binary And Prediction Of Multicomponent Data, Norman I. Silverman May 1977

Vapor-Liquid Equilibrium At Low Pressures : Correlation Of Binary And Prediction Of Multicomponent Data, Norman I. Silverman

Theses

The Wilson equation is chosen as typical of the new correlations for activity coefficients gaining wide distribution for use in the correlation and prediction of vapor-liquid equilibria today. Vapor liquid equilibrium data for 247 binary systems have been regressed against each of ten (10) objective functions and values of the Wilson energy parameters obtained. For the typical binary system, a wide variation of the Wilson energy parameters are observed when different objective functions are used with the given set of binary data. These are each examined with respect to their capability to correlate multicomponent vapor-liquid equilibrium data for seventy-three (73) …


An Experimental Study Of Separation Of Binary And Ternary Gas Mixtures By Parametric Pumping, Stephen E. Belsky May 1977

An Experimental Study Of Separation Of Binary And Ternary Gas Mixtures By Parametric Pumping, Stephen E. Belsky

Theses

An experimental study of gas parametric pumping is presented which examines the purification of helium using silica gel to remove the impurity carbon dioxide. Low gas flow rates are used to allow adequate time for equilibrium to be approached, assuming intraparticle diffusion is the controlling mass transfer step. By varying the cycle time, at long cycle times, the effect of penetration length (a function of dynamic capacity) is indicated. Also, at low cycle time, the effects during pressure changes become more significant.

Using low flow rate improves separation effectiveness if evaluated at equal dynamic capacity. When using low flow rate …


The Effect Of Ultrasonic Vibrations And Catalyst Particle Size On The Decomposition Of Cumene, John F. Pietranski May 1977

The Effect Of Ultrasonic Vibrations And Catalyst Particle Size On The Decomposition Of Cumene, John F. Pietranski

Theses

The effect of ultrasonic vibrations on the vapor phase decomposition of cumene to benzene and proplyene was investigated using silica-aluminum as the cracking catalyst.

The system consists of a tubular reactor with a 4 inch long catalyst chamber made from 1 cm. diameter stainless steel tubing. The catalyst bed was irradiated from above by means of an ultrasonic horn.

The reactor was run at temperatures of 850 to 950°F., frequencies of 26,000 and 39,000 Hz, with a power innut of 0.30 watts/cm.2 . Feed rates of 100 to 300 gms./hr. and catalyst particle sizes of 0.0209 to 0.358 cm. …


Non-Equilibrium Parametric Pumps For Separating Liquids Or Gases, Anil Krishna Rastogi May 1977

Non-Equilibrium Parametric Pumps For Separating Liquids Or Gases, Anil Krishna Rastogi

Theses

An experimental and theoretical study has been done of Non-Equilibrium parametric pumps. Mathematical models and computer programmes are developed for both thermal and heatless parametric pumps based on non-equilibrium conditions and linear isotherms. A mathematical study was done for thermal parametric pumps whereas both experimental and theoretical studies were made for a heatless parametric pump. The effect of different operating conditions has been investigated on the separation of NaCl-H2O via a thermal parametric pump and He-CO2 and He-C3H6 gas mixtures via a heatless parametric pump.

The experimental study of heatless parametric pumps was extended …


An Approach To Energy Conservation In A Manufacturing Industry, William Polignano May 1977

An Approach To Energy Conservation In A Manufacturing Industry, William Polignano

Theses

The approach attacks the problem of control and planning of energy usage via three major categories. These areas are: detection, forecasting and reporting of energy usage.

To initiate any energy program the first step, is the identification of the areas that use the most energy, thus allowing detailed studies to be concentrated in these energy-intensive areas. The author has attempted to show which areas are energy-intensive in his employer's plants.

The second step is the accurate forecasting of energy usage. The author has attempted this via an econometric forecasting model that accurately predicts energy usage based on direct labor hours …


Air Control In A Newark City Subway Station, Robert H. Burch May 1977

Air Control In A Newark City Subway Station, Robert H. Burch

Theses

During the period from June, 1974 to January, 1976, 103 24-hr samples of the air at the Broad Street station of the Newark City Subway were collected by cascade impactor. The size distributions (based on Stoke's equivalent diameters) of the total suspended particulate matter were determined gravimetrically. Samples were also analyzed by atomic absorption spectrometry to obtain information on the concentration of iron, manganese, lead, copper, zinc, and cadmium in each size fraction. The geometric mean particulate level was found to be more than twice the Federal Ambient Air Quality Standard and triple that of ambient Newark air sampled nearby. …


Point Of Operation Safeguarding - A Metal Forming System Approach, William Baker Eaton May 1977

Point Of Operation Safeguarding - A Metal Forming System Approach, William Baker Eaton

Theses

The mechanical power press in its application in the metal stamping and forming industry has been misinterpreted as a selfcontained metal forming system. Examination of the production routines involving the press show that this machine is actually only one elemental component of the metal forming system and not the total production unit.

Authoritative codes and standards pertinent to the mechanical power press have reflected this misinterpretation by not including system considerations in their contents. These omissions have resulted in the providing of safeguards which do not properly reflect the particular characteristics of the metal forming system to which they are …


Sparsity And Decoupling In Load Power Flow Analysis, Kenneth Nazimek May 1977

Sparsity And Decoupling In Load Power Flow Analysis, Kenneth Nazimek

Theses

This paper presents some recent ideas on and methods created by power engineers for the solution of the Load Flow Problem. Beginning with an analysis of the solution of large systems of linear equations, techniques employing elementary matrix operations are discussed to reduce the amount of calculations necessary to achieve repeated solutions. Recent interest in taking advantage of the characteristic sparsity of the admittance matrix is also examined. The problems of operating on and computer storage of large sparse matrices are investigated. Methods to efficiently order, store and work with large sparse matrices are discussed and demonstrated. The general acceptance …


Analysis Of Combustion Products Of Kynol And Nomex, Abdul Halim Hassan Housny May 1977

Analysis Of Combustion Products Of Kynol And Nomex, Abdul Halim Hassan Housny

Theses

The gaseous products generated by flaming combustion of Kynol and Nomex fibers under the same conditions (temperature 300-700°C, natural air) were quantitatively analyzed by infrared spectrophotometry, gas chromatography, mass spectrometry and a colorimetric tube method. The four techniques were chosen to examine the wide range of volatile and condensable products expected due to their different capabilities and sensitivities.

The main gases generated were carbon monoxide, carbon dioxide, methane and benzene.

The mass spectrometer was used to identify the condensed vapors. These were mainly phenol, methyl phenol and dimethyl phenol from the Kynol fiber and benzene, aniline, diaminobenzene, benzoic acid, benzonitrile, …


Dynamic Analysis Of Structures With Solid-Fluid Interaction, Rennee Ramona Pedrido Apr 1977

Dynamic Analysis Of Structures With Solid-Fluid Interaction, Rennee Ramona Pedrido

Dissertations

Interaction between solid and fluid has been recognized to be an important factor in the areas of aeroelasticity, hydroelasticity, and the study of flow-induced vibration in nuclear reactor components. This study develops a finite element model for interaction between an elastic solid and a fluid medium. Plane triangular finite elements have been used separately for fluid, solid, and solid-fluid continua and the equivalent mass, damping, and stiffness matrices and interaction load arrays for all elements are derived and assembled into global matrices. The global matrix differential equation of motion developed is solved in time to obtain the pressure and velocity …


The Effects Of Pressure On The Biodegradability Of Sanitary Sewage In A Model Activated Sludge Reactor, Nicholas A. Mezei Apr 1977

The Effects Of Pressure On The Biodegradability Of Sanitary Sewage In A Model Activated Sludge Reactor, Nicholas A. Mezei

Theses

Based on existing information concerning the effects of pressure on the biodegradability of sanitary sewage, a model activated sludge reactor was used in conjunction with pressurization to determine the viability of pressurization as a primary sewage treatment process.

Municipal sewage samples were pressurized at 40 psig for one hour with an excess of oxygen. An air compressor and a steel drum were used for sample pressurization. A non-pressurized control sample was maintained. After pressurization, the samples were fed into separate model activated sludge reactors. Biodegradability of both types of effluent was measured by determining their five day biochemical oxygen demands …


Thermal Stratification And Circulation Of Water Bodies Subjected To Thermal Discharge, Mohammad A. Borhani Mar 1977

Thermal Stratification And Circulation Of Water Bodies Subjected To Thermal Discharge, Mohammad A. Borhani

Dissertations

A three-dimensional analytical model for large water bodies is presented. Time histories and spatial distribution of pressure, velocity and temperature in water bodies, subjected to thermal discharge, are determined employing a digital computer. The dynamic response is obtained for a rectangular water body by applying a finite difference method to the mass, momentum and energy balance equations. These partial differential equations are algebraically manipulated to obtain; 1) three parabolic differential equations integrated temporally to find the horizontal velocity components and temperature; 2) one algebraic integral equation to get the vertical velocity component; 3) one elliptic differential equation integrated spatially to …


Programming Language Requirements For Human Communication Structures Or Computer Conferencing, Computerized Conferencing & Communications Center, Peter Gordon Anderson Jan 1977

Programming Language Requirements For Human Communication Structures Or Computer Conferencing, Computerized Conferencing & Communications Center, Peter Gordon Anderson

Computerized Conferencing and Communications Center Reports

Our overall goal is to be able, simply and quickly, to construct computer conferencing systems for new requirements, applications, and even experimental ideas or fantasies. One way to view this requirement is as the creation of a highly parameterized conferencing system itself. Our view, however, is that of a programming language; i.e., an integrated notational system for the specification of communication structures and the associated actions or computation to be taken by the computer system hosting the structure.

A communication structure consists of a group of people (and storage devices) each endowed with some characteristics, and some means of person-to-person …


An Experimental Study Of Semi-Continuous Ph-Parametric Pumping With A Center Feed, John S. Dell'osso Oct 1976

An Experimental Study Of Semi-Continuous Ph-Parametric Pumping With A Center Feed, John S. Dell'osso

Theses

Parametric pumping represents a new development in separation science. It has attracted considerable attention both because of its novelty and because it permits continuous operation in small equipment with very high separation factors. The basic principle of parametric pumping is to utilize the coupling of periodic changes in equilibrium conditions caused by periodic changes in some intensive variables (temperature, pH, electric field, etc.), and periodic changes in flow direction to separate the components of fluid which flows past a solid adsorbent. Applications of parametric pumping involving the separation of valuable materials such as proteins would be very attractive and profitable …


Application Of Multilevel Control Techniques To Classes Of Distributed Parameter Plants, Frederick Donald Chichester Sep 1976

Application Of Multilevel Control Techniques To Classes Of Distributed Parameter Plants, Frederick Donald Chichester

Dissertations

This study concerns the application of a combination of multilevel hierarchical systems analysis techniques and Pontryagin's minimum principle (multilevel control) to the problem of controlling optimally two classes of dynamic distributed parameter plants representing concentrations balances in streams, rivers and estuaries. The concentrations treated in this study are those deemed the most effective indicators of water quality, dissolved oxygen (DO) and biochemical oxygen demand (BOD).

One class of plants treated in this study consists of linear continuous distributed parameter plants represented mathematically by sets of simultaneous partial differential equations. Optimal control of a plant of this class is initiated by …


Communication Processes In The Design And Implementation Of Models, Simulations And Simulation-Games: A Selective Review And Analysis, From The Vantage Point Of Computerized Conferencing, Computerized Conferencing & Communications Center, Julian M. Scher Jul 1976

Communication Processes In The Design And Implementation Of Models, Simulations And Simulation-Games: A Selective Review And Analysis, From The Vantage Point Of Computerized Conferencing, Computerized Conferencing & Communications Center, Julian M. Scher

Computerized Conferencing and Communications Center Reports

Computerized conferencing is a new form of communication which permits a group of individuals, who could be separated in time as well as space, to engage in an interactive dialogue with each other through the convenience of their computer terminals. The software for a computerized conferencing system is designed to keep track of all messages communicated in the system, as well as insure that the various protocols for communication are observed by all.

Our objectives in this report are to examine the communication processes found in the design and implementation of models, simulations and simulation-games, and to identify those areas …


The Effects Of Optical Path Perturbations During Recording On A Reconstructed Holographic Image, Stevan Israel Feldman Jun 1976

The Effects Of Optical Path Perturbations During Recording On A Reconstructed Holographic Image, Stevan Israel Feldman

Dissertations

The effects of optical path perturbations occurring during recording on the reconstructed image of a hologram are investigated. It is shown that such variations of optical path are equivalent to conditions of holographic interferometry which can be classified in three categories: 1) object motion alone, 2) film motion alone, and 3) simultaneous film and object motion; all motions are defined with respect to the stationary reference source during the recording of the hologram.

The theory concerning the effects of object motion alone on the radiance distribution of a reconstructed holographic image has already been developed by previous researchers and is …


Distributed Parameter Sensitivity Theory To Solve Certain Reliability Problems, Moses Nee Buernor Ayiku May 1976

Distributed Parameter Sensitivity Theory To Solve Certain Reliability Problems, Moses Nee Buernor Ayiku

Dissertations

It is well known that in actual control systems there are uncontrolled parameter changes caused by aging of elements, temperature, pressure and effects of externalmedium, among others, which may impair the performance ofthe system. Hence, there is the need to develop systems that weakly react to these parameter fluctuations. Sensitivity theory has been developed to study some of these problems. Most of the investigations in this area, however, deal with problems in continuous systems modeled by ordinary differential equations. Even the recent publications on sensitivity problems in distributed parameter control systems are largely concerned with systems modeled by first order …


Investigation And Optimum Design Of The Generalized Second-Order Phase-Locked Loop, William Allen Novick May 1976

Investigation And Optimum Design Of The Generalized Second-Order Phase-Locked Loop, William Allen Novick

Dissertations

In this dissertation, a second-order phase-locked loop (PLL) in which the loop filter contains complex zeros is investigated in both its linear and nonlinear modes of operation; prior designs used a filter containing a simple zero on the negative real axis. This "generalized" second-order PLL had been heretofore essentially unexplored.

The basic characteristics of the generalized second-order PLL operating in the linear mode including the open and closed-loop responses and the corresponding root locus were generated and compared against those of the conventional second-order PLL. As in the conventional case, the generalized second-order PLL is found to be unconditionally stable. …


Preparation And Magnetic Properties Of Rare Earth Garnets And Apatites, Rostam Mondegarian May 1976

Preparation And Magnetic Properties Of Rare Earth Garnets And Apatites, Rostam Mondegarian

Dissertations

It has been found possible to prepare garnets with magnetic trivalent rare earth ions filling all or most dodecahedral sites while nonmagnetic Sc3+ ions fill all octahedral sites and magnetic Fe3+ ions fill all or most tetrahedral sites. Phase-pure garnets found include {RE3-yScy}[Sc2](Fe3)O12, where RE is Sm, Eu, Gd, Tb or Dy and y can be zero with Sm and Eu; {Nd3}[Sc2](FezGa3-z)O12; and other Nd-Sc-Fe garnets of the type {Nd3-(w+y)MwScy}[Sc2](Fe …


Separations Of Multicomponent Mixtures Via Thermal Parametric Pumping, John Daniel Stokes May 1976

Separations Of Multicomponent Mixtures Via Thermal Parametric Pumping, John Daniel Stokes

Dissertations

This dissertation covers the separation of solutes from multicomponent solutions via direct mode thermal parametric pumping.

Dilute solution separations were predicted from existing binary equations by assuming the existence of pseudo binary systems, each system consisting of one solute and the common solvent. Two systems, toluene-aniline-n-heptane and toluene-acetophenone-n-heptane with a silica gel adsorbent were used to experimentally demonstrate the separation. Experimental results were in good agreement with the mathematical predictions.

For concentrated multicomponent solutions, the separation was demonstrated by the system, toluene-acetophenone-n-heptane on silica gel. The effects of mass transfer and nonlinear adsorption isotherms became significant and a numerical solution …


The Recovery Of Methanol From The Mother Liquor Of A Pharmaceutical Active Ingredient, Richard Lawrence Eichholtz May 1976

The Recovery Of Methanol From The Mother Liquor Of A Pharmaceutical Active Ingredient, Richard Lawrence Eichholtz

Theses

The company has been sending to the sewer the filtrate from one of our chemical processes. This filtrate contains 63 vol. % methanol. The recovery of this methanol would reduce the amount of purchased methanol. The recovery would also reduce the Biological Oxygen Demand of the plant effluent. In the near future the local sewer authority will be billing the company for BOD.

The goal of the recovery process is to obtain methanol of satisfactory quality for reuse in the process from which it came. A literature search and a laboratory study verified the non-ideality of the system. Preliminary calculations …


Subcontracting By The Petrochemical Engineer-Constructor, Michael Peter Skurla May 1976

Subcontracting By The Petrochemical Engineer-Constructor, Michael Peter Skurla

Theses

An analysis has been made of the methods used by a Petrochemical Engineer-Constructor, who has national labor agreements, in deciding if the construction phase of a project should be done by a subcontract method of construction or be accomplished on a direct hire basis. The petrochemical complex under discussion is considered to be in the $75 million range for the total installed cost including design, engineering, procurement, and construction.

The influence of subcontracting portions of the construction phase by the Engineer-Constructor is reviewed with its impact on: the client; project schedule and cost; local and national labor relations, because of …


The Effects Of Angularity On The Compaction And Shear Strength Of A Cohesionless Material, Richard Edward Swiderski May 1976

The Effects Of Angularity On The Compaction And Shear Strength Of A Cohesionless Material, Richard Edward Swiderski

Theses

Several physical methods are described for the practical measurement and rating of angularity (shape) of cohesionless soil particles. Angularity is determined by utilizing the fundamental property of a sphere: a sphere has the smallest contact surface area of any shape for a given volume. Therefore, any other shape will exhibit a greater contact surface area and consequently will have a greater frictional resistance which is a function of its degree of angularity.

The effects of angularity on the physical behavior (e.g. strength) of cohesionless soils was investigated at various relative compaction densities. For this purpose a combined compaction and direct …


Non-Standard Workweek Scheduling Technique Selection, John Alexander Oak May 1976

Non-Standard Workweek Scheduling Technique Selection, John Alexander Oak

Theses

This thesis presents a description of non-standard work scheduling techniques and a comparison method which enables decision-makers to differentiate between available work-scheduling alternatives with the purpose in mind of selecting the most appropriate and suitable arrangement. The method developed calls for the decision-maker to follow a five-step sequential process to obtain final results. The ingredients necessary to achieve such final results are obtained in a manner similar to that demanded by decision-making-under-uncertainty conditions commonly followed in actual industrial settings.

Since the primary objective of business management is the achievement of a profit through the manipulation of available resources, initial sections …