Engineering Commons^™

Synthesis And Characterization Of Cdse-Zns Core-Shell Quantum Dots For Increased Quantum Yield, Joshua James Angell

Master's Theses

Quantum dots are semiconductor nanocrystals that have tunable emission through changes in their size. Producing bright, efficient quantum dots with stable fluorescence is important for using them in applications in lighting, photovoltaics, and biological imaging. This study aimed to optimize the process for coating CdSe quantum dots (which are colloidally suspended in octadecene) with a ZnS shell through the pyrolysis of organometallic precursors to increase their fluorescence and stability. This process was optimized by determining the ZnS shell thickness between 0.53 and 5.47 monolayers and the Zn:S ratio in the precursor solution between 0.23:1 and 1.6:1 that maximized the relative …

Comparison Of A High Purity Germanium Gamma Ray Spectrometer And A Multidimensional Nai(T1) Scintillation Gamma Ray Spectrometer, Greg Stratton

Aerospace Engineering

This report compares two different gamma ray spectrometers in terms of performance, operation, and apparatus and also investigates the design and integration challenges of using gamma ray spectrometers in space. The first spectrometer is a one-dimensional high purity germanium (HPGe) spectrometer and the second is a multidimensional NaI(Tl) scintillation spectrometer (MGRS). The key results show that the HPGe exhibits 15 to 27 times better energy resolution than the MGRS, but the MGRS is 52 times more sensitive and removes 177 % more of the background radiation.

3d Cfd On An Open Wheel Race Car Front Wing In Ground Effects, Thomas A. Price

Aerospace Engineering

The purpose of the report is to investigate the ability of the Fluent 6.3 k-ε Realizable turbulence model with standard wall functions to model the flow around the front wing of Cal Poly’s 2008 Formula SAE car. The three primary areas of interest are ground effects, the wing wheel interaction, and the wing tip vortices. Fluent was successful at modeling the increase suction from the ground effects, and the upwash due to the wing tip vortices. The results also displayed how the high pressure region in front of the tire propagates forward and interacts with the pressure distribution around the …

Nitrogen Mass Balance In A High Rate Algal Pond, Kevin Jones

Biomedical Engineering

The objective of the study described herein was to perform a mass balance on nitrogen in four small high rate algal ponds (HRAPs) in order to determine the fate of the nitrogen. The total percentage of nitrogen lost via ammonia volatilization was calculated via the mass balance.

Analysis And Design Of A Propulsion System Trade Study Tool For A Boeing 376 Series Communications Satellite, Kevin Dunk

Aerospace Engineering

No abstract provided.

Refrigerant Mass Migration Modeling And Simulation For Air Conditioning Systems, Bin Li, Steffen Peuker, Predrag S. Hrnjak, Andrew G. Alleyne

Mechanical Engineering

Refrigerant mass migration and redistribution are regarded as key factors affecting the cycling performance of air conditioning and refrigeration systems. A dynamic model of an R134a automotive air conditioning system is presented as an example in this paper to capture the refrigerant migration during compressor shut-down and start-up operations. Model validation against experimental data demonstrates the capabilities of the modeling approach in predicting the refrigerant mass migration among the components during shut-down, and the resulting refrigerant redistribution behaviors during start-up. These results represent the first refrigerant mass migration prediction in a validated dynamic system model. In addition, the potential of …

Vibroacoustic Study Of Circular Cylindrical Tubes In Roller Coaster Rails, Joshua I. Davis, Charles Birdsong, Harold M. Cota

Mechanical Engineering

Excessive noise generated by roller coasters during operation is a significant issue for amusement parks located near residential and business districts. Previous work showed that filling the rails with sand and pea gravel can provide noise reduction levels of up to 10 and 15 decibels. However, using damping materials may require additional support structures to accommodate the weight increase and, consequently, raise installation costs. This paper presents field results that characterize sound and vibration of roller coasters with different rail geometry and fill. Finite element modeling is used to compute the theoretical natural frequencies and mode shapes of a typical …

The Human Dimension Of Systemic Department-Level Change: A Change Agent’S Retrospective On A Case Of Reform, Linda Vanasupa

Materials Engineering

This paper represents a narrative of the process of department-level reform through the eyes of the initiating agent of change. Over the course of reform, our program has grown by 40%, primarily through retaining students. We exhibit a 10% net important rate of engineering students in the first two years of the curriculum relative to the college’s 5% mean export rate. Student freshmen SAT scores also indicate that we are attracting students with more balanced learning interests. The design of our Department Level Reform grant was to advance the knowledge of how to design engineering learning experiences that accomplish two …

Effect Of Palletized Box Offset On Compression Strength Of Unitized And Stacked Empty Corrugated Fiberboard Boxes, S. Paul Singh, Jay Singh, Koushik Saha

Industrial Technology and Packaging

The purpose of this study was to evaluate the effect of pallet type, tie-sheet and stack configuration on compression strength of a palletized load of boxes. Four boxes made from similar board grade and different dimensions were selected for this study. The column stack configuration which represented the control was compared with the 3 stack configurations either on a CHEP® or GMA pallet. The unitized load either had a tie-sheet in between layers or no tie-sheet between layers of boxes on the respective pallets, for compression strength comparison with the control unitized load represented by a column stack configuration. This …

Effect Of Horizontal Offset On Vertical Compression Strength Of Stacked Corrugated Fiberboard Boxes, Jay Singh, S. Paul Singh, Koushik Saha

Industrial Technology and Packaging

The purpose of this study was to evaluate the effect of horizontal offset on the compression strength of stacked box configurations. Four different boxes of varying sizes and similar board combinations, made from similar flute but different manufacturers were studied. The single box compression strength for each type of box was determined to represent as the control for this study. The compression strength of control boxes were compared to overall strength of a three-high stack and in three different offset configurations. In addition a set of perfectly aligned boxes were compared to overall strength of a three-high stack and in …

Flexural Behavior Of Interlocking Compressed Earth Block Shear Walls Subjected To In-Plane Loading, Bradley James Stirling

Master's Theses

This thesis investigates the flexural behavior of interlocking compressed earth block (ICEB) shear walls. In-plane cyclic tests were conducted to evaluate the performance of three flexure dominant large scale ICEB specimens: a slim wall with a 2:1 height to width aspect ratio, a flanged wall, and a wall with an opening at the center. Following the experimental investigation, two types of analyses were conducted for calculating the ultimate strength of flexure dominant ICEB walls: a nonlinear static analysis model assuming lumped plasticity and a plastic analysis model. In addition, incremental dynamic analysis was conducted to address the seismic performance of …

Teaching Sustainability Analysis In Electronics Lecture Courses, David Braun

Electrical Engineering

Based on positive prior experiences teaching sustainability analysis in electronics laboratory courses, this work explores techniques for teaching sustainability analysis in lecture courses. As difficult as it may seem to incorporate sustainability into integrated circuit courses or other engineering courses, it may prove as easy as asking students to consider how the coursework relates to sustainability issues.

The need to educate students “to design a system, component, or process to meet desired needs within realistic constraints such as economic, environmental, social, political, ethical, health and safety, manufacturability, and sustainability” has gained sufficient value to deserve its own ABET Program Outcome, …

The Inside-Out Classroom: A Win-Win Strategy For Teaching With Technology, Daniel J. Waldorf, Lizabeth Schlemer

Industrial and Manufacturing Engineering

As costs of higher education soar and many universities face uncertain funding models, institutional pressures have increased to improve instructor efficiency. At the same time, U.S. industry leaders and leading educators have called for improvements in engineering education based on more interactive, hands-on student learning experiences. Although many efforts have been made to take advantage of technology to either improve student learning or to maintain student learning while increasing instructor efficiency, few approaches have been shown to improve both learning and efficiency. A teaching method is proposed to improve student learning and increase student satisfaction while also addressing the instructors’ …

Teaching Reliability At The Undergraduate Level, Robb E.S. Moss

Civil and Environmental Engineering

For Cal Poly's Civil and Environmental Engineering curriculum a stand‐alone introductory course called Engineering Risk Analysis introduces concepts of reliability analysis. This course encompasses all the sub‐disciplines in civil and environmental engineering. After five years of teaching this course there are a number of lessons that may be useful to other instructors including; solving a simple example problem using multiple methods, focusing on the normal and lognormal distributions for a quick preliminary solution, using reliability spreadsheet solutions, and allowing the students to develop their own applications of probabilistic tools. A discussion of the course format, references and resources, pedagogy devices, …

Bounding The Probability Of Failure For Levee Systems, Justin C. Hollenback, Robb E.S. Moss

Civil and Environmental Engineering

An exact solution for the probability of failure of large complex infrastructure systems is rarely obtainable; however the probability of failure can often be bounded. An example of this type of system is the levee system in the California Bay Delta. Large levee systems often consist of many components arranged in series and parallel sub‐systems. There is the problem of defining component (or reach) length, and therefore the total number of components in the system where component length is dependent on failure mode. Methods of bounding probability of failure based on uni‐, bi‐, and tri‐modal component probability of failure are …

Evolving A Summer Engineering Camp Through Assessment, Katherine Chen, Lizabeth Schlemer, Heather Scott Smith, Teana Fredeen

Industrial and Manufacturing Engineering

EPIC (Engineering Possibilities in College) is a one-week summer program for high school students (entering 9th-12th grades) to learn about engineering and experience hands-on labs in a university atmosphere. It's an opportunity for students to explore the different types of engineering available at many universities. The aim of EPIC is to expand the College of Engineering mission to K-12 students: "To educate students for careers of service, leadership and distinction in engineering or other fields by using a participatory, learn by doing, ‘hands-on’ approach".

Design Projects With Out-Of-Town Companies, Lizabeth Schlemer

Industrial and Manufacturing Engineering

The capstone design class in the industrial engineering department at California Polytechnic State University, San Luis Obispo (Cal Poly) includes projects with companies. The projects are large ambiguous facilities design problems that allow students to incorporate many aspects of the IE curriculum. For the past 15 years students have been participating in these projects with local companies. Over the past several years, companies from out of town (200 miles to the north in Mountain View or 200 miles to the south in Oxnard) have participated. These out of town companies have presented certain logistical issues, but they have proven to …

A Simple Lab Project Integrating Theoretical, Numerical, And Experimental Stress Analysis, Peter Schuster

Mechanical Engineering

Learning is enhanced when students consider problems from different perspectives. Unfortunately, in stress analysis courses, the depth of the mathematical analysis and limited time and resources often restricts the focus to traditional closed-form solutions occasionally supplemented with simple demonstrations. In order to enhance student engagement and understanding, a lab mini-project was developed for teaching Castigliano’s method for structural analysis in a stress analysis course.

The mini-project consists of a design evaluation task which is investigated using three different methods: closed-form analysis, finite element analysis, and simple model build and test. The task is to select the better of two alternative …

The 4+1 Program And Distance Learning Meeting Objectives And Outcomes, Daniel W. Walsh, Lanny Griffin, Robert S. Crockett

Biomedical Engineering

Graduate engineering education is a key to the maintenance of U.S. competitiveness in the world market. The world has been an extremely dynamic engine during the last fifty years, and we have witnessed a dramatic change in the world order. The change has been evolutionary in many cases, but events in Eastern Europe, the Middle East and the erstwhile Soviet Union are only slightly less cataclysmic than the Second World War. In a world where strength is measured in terms of the financial resource, the technological ability and the intellectual capability of a populace Japan, China, India and the EEC …

An Industry-University Partnership Case Study, Peter Schuster

Mechanical Engineering

At many universities, senior undergraduate mechanical engineers work in teams on industry-sponsored capstone design projects. These projects provide an excellent opportunity for students to synthesize their courses, work with the more realistic deadlines and expectations of industry, and interact with company representatives. It also give industrial partners a chance to become educational partners with the university, preview potential new hires, and complete some noncritical projects at low cost.

This paper presents a case study of a successful six-year partnership between the Automotive Bumper Project committee of the American Iron & Steel Institute (AISI) and a mechanical engineering department. The AISI …

The Effects Of Damage Arrestment Devices In Composite Plate Sandwiches With Fastener Holes, Mark Anderson, Nancy Hung Choy, Lacey Jones, Rita Kourskaya

Aerospace Engineering

Composite materials such as a carbon fiber are used in a variety of new technologies including aircraft, spacecraft, and motor vehicles. Carbon fiber has a high strength to weight ratio, a key advantage over other material options. This report discusses the use of composite damage arrestment devices (DADs) in composite sandwich panels with a foam core. There are three different curing cycles tested for the DADs: pressure only, vacuum only, and vacuum with 1000 lbs of pressure. Using a Tetrahedron Heat Press to cure the composite specimen and an Instron Machine to perform tensile testing, data was collected for each …

Composite I-Beam Fabrication And Testing In Response To 14th Annual Sampe Bridge Competition, Kodi Rider, Niño Noel Las Piñas, Hans Mayta

Aerospace Engineering

Composites are a type of material that generally combines two materials yielding mechanical properties that are different than its constituent parts. These constituents are classified as either a fiber or a matrix. The objective of this project is to create a carbon-fiber composite I-beam that meets the specifications of the SAMPE student bridge competition. The I-beam consists of carbon fiber unidirectional and woven laminas, as well as aluminum honeycomb and high density polystyrene foam to stiffen the structure. The bridge contest rules limit the dimensions and weight of the bridge. The cross-section must be within 4 inches x 4 inches …

Thermal Analysis Of The Cubesat Cp3 Satellite, Jonas Friedel, Sean Mckibbon

Aerospace Engineering

Due to inconsistencies found in the on-orbit thermal data from the CubeSat CP3 satellite between 2007 and 2011, further analysis is performed on a larger number of data from August 2010 through April 2011, aiming to find an explanation for the overall increasing measured temperatures and shortening peak periods. Therefore, the satellite power data as well as orbital anomalies are analyzed leading to the conclusion that the satellite was temporarily (January – March 2011) orbiting with significantly increased sun exposure causing the higher temperatures. The shortened temperature peak periods are explained by alternating albedo values as the main influence in …

A System Model For Green Manufacturing, Ahmed M. Deif

Industrial Technology and Packaging

Manufacturing systems evolution is afunction in multiple external and internal factors. With today’s global awareness of environmental risks as well as the pressing needs to compete through efficiency, manufacturing systems are evolving into a new paradigm. This paper presents a system model for the new green manufacturing paradigm. The model captures various planning activities to migrate from a less green into a greener and more eco-efficient manufacturing. The various planning stages are accompanied by the required control metrics as well as various green tools in an open mixed architecture. The system model is demonstrated by an industrial case study. The …

Neural Network Based Edge Detection For Automated Medical Diagnosis, Dingran Lu, Xiao-Hua Yu, Xiaomin Jin, Bin Li, Quan Chen, Jianhua Zhu

Electrical Engineering

Edge detection is an important but rather difficult task in image processing and analysis. In this research, artificial neural networks are employed for edge detection based on its adaptive learning and nonlinear mapping properties. Fuzzy sets are introduced during the training phase to improve the generalization ability of neural networks. The application of the proposed neural network approach to the edge detection of medical images for automated bladder cancer diagnosis is also investigated. Successful computer simulation results are obtained.

Modeling Of A Gyro-Stabilized Helicopter Camera System Using Artificial Neural Networks, Nicholas Layshot, Xiao-Hua Yu

Electrical Engineering

On-board gimbal systems for camera stabilization in helicopters are typically based on linear models. Such models, however, are inaccurate due to system nonlinearities and complexities. As an alternative approach, artificial neural networks can provide a more accurate model of the gimbal system based on their non-linear mapping and generalization capabilities. This paper investigates the applications of artificial neural networks to model the inertial characteristics (on the azimuth axis) of the inner gimbal in a gyro-stabilized multi-gimbal system. The neural network is trained with time-domain data obtained from gyro rate sensors of an actual camera system. The network performance is evaluated …

Determination Of The Surface Boundary Layer Using A Quadrotor, Andrew Haviland

Aerospace Engineering

Wind velocity data was taken by a quadrotor UAV using accelerometers, gyroscope, and a barometer. Data was taken at different altitudes over a single position to determine the boundary layer at the surface of the earth. The data taken was compared to the results from numerical methods to determine if this is a practice application for a quadrotor. A few weeks before the test was set to get underway, the quadrotor suffered a very hard crash while testing the GPS and altitude hold function and wasn’t able to completely recover from it. Theoretical results and experiment proposal are covered. 

Optimal Process Design For Recycled Pet Blends In Injection Molding, Perry H. Johnson

Industrial and Manufacturing Engineering

This case study on optimization of blends with process variables shows how application of advanced tools of Design of Experiments can simultaneously optimize a mixture formulation and processing conditions, taking advantage of complex interactions in the system. The effect of recycled PET and virgin PET on tensile strength and stiffness was studied. The optimal amount of mixture components to produce maximum recycled-content products is determined. As the results of doing systematic experimentation, using mixture experiments, the quality of recycled plastic products can be improved and becomes more robust to variations at the optimal thermal operating settings. This is done through …

Microfiche Digitization And Process Improvement For Cal Poly Senior Projects, Kyle Gaunt

Industrial and Manufacturing Engineering

This project addresses the need to digitize Senior Projects available on microfiche at the Cal Poly Robert E. Kennedy Library. Microfiche is an outdated document archival medium and is unfamiliar to most students, making Senior Project research inconvenient and frustrating to students. To make this process easier and more accessible to students, the University Library should consider digitizing its Senior Project collection and improving the current system in the mean time.

The Six Sigma DMAIC method was used to discover root cause problems of the current system, define performance metrics, and to develop data driven solutions for improving the current …

Design, Manufacturing And Testing Of An Environmentally-Green Bipropellant Thruster, Alex Bendoyro, Gabriel Sanchez, Erin Stearns, Phillip Takahashi

Aerospace Engineering

This project reviews the design, manufacturing and experimentation process of a green bi-propellant thruster designed to output 5 lbf. The goals were to successfully design, manufacture and test a thruster, while discovering the complications that arise through out the complete design process of a green thruster. The thruster was successfully designed using ideal rocket equations and the design was successfully confirmed using CFD and FEA. Manufacturing of the thruster was fully planned and revealed mild flaws in thruster design. For example some features were not manufacturable to the exact measurements desired. Testing of the engine gave results inconsistent with expected …