Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Air Force Institute of Technology

Discipline
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 4981 - 5010 of 5699

Full-Text Articles in Engineering

The Effect Of Cutout Dimensionality On The Collapse Characteristics Of Cylindrical Composite Shells Of Varying Thickness, John C. Del Barga Dec 1993

The Effect Of Cutout Dimensionality On The Collapse Characteristics Of Cylindrical Composite Shells Of Varying Thickness, John C. Del Barga

Theses and Dissertations

This study involved a numerical and experimental investigation of the (geometric instability of graphite/epoxy cylindrical panels with free vertical edges undergoing axial compression. Symmetric quasi-isotropic laminates with five different size centralized cutouts, were investigated for two axial lengths of panels and three thicknesses. The study compared experimental data to results from SHELL, a geometrically nonlinear finite-element program which incorporates a parabolic transverse shear strain distribution through the thickness. The research verified that the SHELL program will provide good predictions of the collapse characteristics of a panel with large cutouts of varying dimensions undergoing large displacements and rotations. The best correlation …

Go to article

Dynamic Response Of A Compressor Research Facility, Janet W. Grondin Dec 1993

Dynamic Response Of A Compressor Research Facility, Janet W. Grondin

Theses and Dissertations

The response of the Wright Laboratory Compressor Research Facility to a small amplitude, acoustic, sinusoidal disturbance was investigated. The fluid transmission line equations for laminar, one-dimensional flow in a circular duct were solved and verified through a laboratory experiment using a scale model of the facility. The resonant frequencies of the facility were determined for a variety of flow conditions. Techniques for analytically modeling end impedance and flow straightening elements were also studied. The fundamental frequency of the facility was determined to be between 5.5 and 6.5 Hz depending on the flow conditions and geometry configurations specified.

Go to article

Effects Of Crenulations On Three Dimensional Losses In A Linear Compressor Cascade, William L. Spacy Ii Dec 1993

Effects Of Crenulations On Three Dimensional Losses In A Linear Compressor Cascade, William L. Spacy Ii

Theses and Dissertations

An experimental investigation into the effect of compressor blade trailing edge geometry on three-dimensional flows in a linear cascade was conducted at the AFIT linear cascade test facility. Hot-wire/hot-film anemometry along with total pressure instrumentation was used to analyze crenulation generated vortices and their interaction with the three-dimensional flows in the cascade. The effects of this interaction on the performance parameters associated with the cascade were quantified. The results-indicate that wake mixing is better for crenulated trailing edges and that the precise geometry of the crenulations is critical to performance. One crenulation geometry was found to increase wake mixing while …

Go to article

Fatigue Behavior Of A Cross-Ply Ceramic Matrix Composite At Elevated Temperatures Under Tension-Tension Loading, Richard J. Tuznik Dec 1993

Fatigue Behavior Of A Cross-Ply Ceramic Matrix Composite At Elevated Temperatures Under Tension-Tension Loading, Richard J. Tuznik

Theses and Dissertations

A study was conducted which investigated the behavior of a Nicalon/ Calcium-Aluminosilicate (Nicalon/CAS) cross-ply [0/90]2S ceramic matrix composite at elevated temperatures under tension-tension fatigue loading. Tension-tension fatigue tests were performed with a load ratio of R = 0.10 and a frequency of 10 Hertz at 700°C and 850°C. These results were compared to results from a previous study conducted at room temperature. Material behavior and damage was recorded by fatigue life curves, elastic modulus' maximum and minimum strain, acetate replication techniques, and post-mortem fractography. Analysis of these results showed identical matrix dominated damage behavior at RT and 700°C. Ultimate …

Go to article

Optimal Control Design Advantages Utilizing Two-Degree-Of-Freedom Controllers, Michael J. Stephens Dec 1993

Optimal Control Design Advantages Utilizing Two-Degree-Of-Freedom Controllers, Michael J. Stephens

Theses and Dissertations

The purpose of this study was to investigate and describe the differences between a one-degree-of-freedom (1-DOF) controller, in which a controller is placed in a single location in the control loop, and a two-degree- of-freedom (2-DOF) controller, in which two separate controllers are designed -- one in the feedback loop and the other as a prefilter in the forward loop. The approach involved summarizing the major rules governing loop shaping for performance and robustness in the 1-DOF case and then extending the concepts to the 2-DOF case. H2 optimization was utilized to perform several types of SISO examples and …

Go to article

Electrical Properties Of P-Type Gainp2, Roy S. Calfas Dec 1993

Electrical Properties Of P-Type Gainp2, Roy S. Calfas

Theses and Dissertations

The GaInP2 n+—p junction diode has recently become important to the development of high efficiency GaInP2GaAs dual junction solar cells, which have a demonstrated air mass 1.5 conversion efficiencies in excess of 27. In order to study the effects of long term exposure to the space environment, the GaInP2 n+—p junction diodes were irradiated with a 1 MeV electron beam with a fluence of 1016 electrons/cm2. Since little is known about deep level defects traps in GaInP2, a deep level transient spectroscopy DLTS study was made to characterize the …

Go to article

Experimental Analysis Of Heat Transfer Characteristics And Pressure Drop Through Screen Regenerative Heat Exchangers, Jeffrey L. Wiese Dec 1993

Experimental Analysis Of Heat Transfer Characteristics And Pressure Drop Through Screen Regenerative Heat Exchangers, Jeffrey L. Wiese

Theses and Dissertations

This study investigated the effect on heat transfer and friction characteristics for screen regenerative heat exchangers with the screen thickness reduced by rolling. The experiments were performed on 250 and 325 mesh, 304 stainless steel screen using helium gas. Reynolds numbers, based on hydraulic radius, Re, were between 10 and 100. Both the Colburn factor, StPr2/3, and friction factor, f, decreased as the screen thickness was reduced. A correlation was found for predicting friction factor, f. The drag coefficient per screen remained nearly unchanged for thicknesses reduced not more than 30 percent. The decrease in Colburn factor was …

Go to article

Development And Implementation Of A Scramjet Cycle Analysis Code With A Finite-Rate-Chemistry Combustion Model For Use On A Personal Computer, Clarence F. Chenault Dec 1993

Development And Implementation Of A Scramjet Cycle Analysis Code With A Finite-Rate-Chemistry Combustion Model For Use On A Personal Computer, Clarence F. Chenault

Theses and Dissertations

This study compared the performance of an equilibrium combustion model to a finite-rate-chemistry combustion model for a fixed geometry Scramjet flying at the flight conditions of Mach 12, 15, and 18 with a constant dynamic pressure of 50,000 Pa. An integrated PC-based code, developed specifically for this study, models the combustor as an equilibrium combustion process or as finite-rate-chemistry combustion process. This integrated program is based on two existing programs, Ramjet Performance Analysis (RJPA) and 3 STREAM. The effects of mixing schedule, combustor length, and combustor exit area were investigated. The results of this study indicate that inefficient mixing is …

Go to article

Partitioning Structural Vhdl Circuits For Parallel Execution On Hypercubes, Kevin L. Kapp Dec 1993

Partitioning Structural Vhdl Circuits For Parallel Execution On Hypercubes, Kevin L. Kapp

Theses and Dissertations

Distributing simulations among multiple processors is one approach to reducing VHDL simulation time for large VLSI circuit designs. However, parallel simulation introduces the problem of how to partition the logic gates and system behaviors among the available processors in order to obtain maximum speedup. This research investigates deliberate partitioning algorithms that account for the complex inter-dependency structure of the circuit behaviors. Once an initial partition has been obtained, a border annealing algorithm is used to iteratively improve the partition. In addition, methods of measuring the cost of a partition and relating it to the resulting simulation performance are investigated. Structural …

Go to article

An Object-Oriented Database Interface For Ada, Anthony D. Moyers Dec 1993

An Object-Oriented Database Interface For Ada, Anthony D. Moyers

Theses and Dissertations

Object data management ODM is currently at the forefront of research and development efforts in the database community. In order to take advantage of ODM technology, the Department of Defense DoD needs to ensure that these systems are accessible to Ada programmers. The Air Force Institute of Technology AFIT is conducting research towards the development of an Ada ODM interface to existing ODM systems. The design goals are portability, transparency, and completeness for Ada programmers. Portability means that the ODM system can be changed without affecting any existing application programs. Transparency means that Ada programmers can use the interface without …

Go to article

Virtual Memory Management And Virtual Bus Overloading On Multiple Channel Architectures, John N. Armitstead Dec 1993

Virtual Memory Management And Virtual Bus Overloading On Multiple Channel Architectures, John N. Armitstead

Theses and Dissertations

Today's computational environment requires the processing capabilities available only through parallel architectures. The bottleneck that limits the potential of parallel processing is communication between processors, memories, and other hardware devices. A proposed multiple channel architecture (MCA) utilizes tunable semiconductor lasers and fiber optic cables that serve as the communication medium between processor, memory, and I/O nodes. A memory management unit (MMU) was completely described and implemented in a multiprocessor simulator. A permutation-based interleaving (PBI) scheme was utilized to reduce the chance of memory access collisions. Virtual bus utilization, number of collisions, and message traffic patterns were studied under various amounts …

Go to article

Weapon System Sensor Integration For A Dis-Compatible Virtual Cockpit, Matthew N. Erichsen Dec 1993

Weapon System Sensor Integration For A Dis-Compatible Virtual Cockpit, Matthew N. Erichsen

Theses and Dissertations

This thesis continues the Virtual Cockpit VC research which investigates distributed interactive virtual flying, environments. The VC vl.0 used the SIMNET protocols to only communicate position and orientation over a common network. A simple cockpit instrumentation configuration and limited head- tip display, HUD showed aircraft state. With VC vl.0 weapons or sensors could not interact in the simulation environment. The VC v2.0 transitions from the SIMNET protocol to a partial implementation of the Distributed Interactive Simulation DIS v2.0.3 protocol. Simulated radar and forward looking infra-red FLIR sensors were developed to aid operator detection and designation when employing various munition types. …

Go to article

Radar Cross Section Visualization Using Sample Buffer Progressive Refinement Volume Rendering, Alain L. Jones Dec 1993

Radar Cross Section Visualization Using Sample Buffer Progressive Refinement Volume Rendering, Alain L. Jones

Theses and Dissertations

This study developed a prototype for an interactive radar cross section visualization software system. The system, hosted on a Silicon Graphics workstation, is intended to support aircrews, mission planners, aircraft designers, and others who require an understanding of aircraft radar cross section characteristics. The input to the system is a set of radar cross section samples taken at various aspect angles. A pre-processor developed as part of this study transforms the input radar cross section data into a three-dimensional cuberille data volume. This data volume is then visualized using an interactive volume renderer. The interactive volume renderer implements progressive image …

Go to article

Genetic Algorithms Applied To A Mission Routing Problem, James B. Olsan Dec 1993

Genetic Algorithms Applied To A Mission Routing Problem, James B. Olsan

Theses and Dissertations

This thesis applies genetic algorithms to a mission routing problem. The mission routing problem involves determining an aircraft’s best route between a staging base and a target. The goal is to minimize the route distance and the exposure to radar. Potential routes are mapped to a 3-dimensional mesh where the nodes correspond to checkpoints in the route and the arcs correspond to partial paths of the route. Each arc is weighted with respect to distance and exposure to radar. A genetic algorithm is a probabilistic search technique loosely based on theories of biological evolution. Genetic crossover and survival of the …

Go to article

A Virtual Environment For Satellite Modeling And Orbital Analysis In A Distributed Interactive Simulation, Andrea A. Kunz Dec 1993

A Virtual Environment For Satellite Modeling And Orbital Analysis In A Distributed Interactive Simulation, Andrea A. Kunz

Theses and Dissertations

In response to the need for a more realistic, interactive, and immersive space simulation system, the Joint National Intelligence Defense Staff JNIDS has sponsored the development of the Satellite Modeler at the Air Force Institute of Technology AFIT. The Satellite Modeler SM is a virtual environment VE application that allows analyst-users to enter a virtual near- Earth space environment and visualize realistic satellite models performing accurate orbital motion. The Satellite Modeler provides manipulation functions that allow a user to interact with multiple satellite models and satellite constellations. The system affords the user multiple vantage points within the environment to view …

Go to article

Object Imaging Accomplished With An Integrated Circuit Robotic Tactile Sensor Incorporating A Piezoelectric Polyvinylidene Fluoride Thin Film, John M. Emmert Dec 1993

Object Imaging Accomplished With An Integrated Circuit Robotic Tactile Sensor Incorporating A Piezoelectric Polyvinylidene Fluoride Thin Film, John M. Emmert

Theses and Dissertations

The purpose of this research effort was to investigate the performance of a piezoelectric tactile sensor design and appropriately refine it. The sensor was fabricated from an 8 x 8 electrode array MOS integrated circuit. Each taxel in the array was 400 microns x 400 microns. A 6 mm x 6 mm piece of piezoelectric polyvinylidene fluoride was adhered to the electrode array using a urethane dielectric adhesive to form the active sensing area of the sensor. An amplifier was investigated to enhance the range of the tactile sensor's output signal. The amplifier is a high input' impedance differential amplifier …

Go to article

Development Of A 4-Bit Parallel Analog-To-Digital Converter And A Four- Quadrant Double-Balanced Mixer Using Heterojunction Bipolar Transistor Technology, Scott F. Jokerst Dec 1993

Development Of A 4-Bit Parallel Analog-To-Digital Converter And A Four- Quadrant Double-Balanced Mixer Using Heterojunction Bipolar Transistor Technology, Scott F. Jokerst

Theses and Dissertations

A 4-bit parallel analog-to-digital converter (ADC) and a four- quadrant double-balanced mixer were designed and simulated using heterojunction bipolar transistor (HBT) technology to test the dc and high-frequency characteristics of HBTs. HSPICE simulations of small-scale components and the large-scale ADC operated within expected ranges. The ADC implemented with the Rockwell HBT model operated at a sampling rate of over 1 GHz, and the Fellows model also operated at a 1 GHz sampling rate. The mixer produced an intermediate frequency (IF) signal using radio frequency (RF) and local oscillator (LO) inputs. The circuit produced a +9 dB power gain with less …

Go to article

Design Of A Flight Controller For An Unmanned Research Vehicle With Control Surface Failures Using Quantitative Feedback Theory, Mark S. Keating Dec 1993

Design Of A Flight Controller For An Unmanned Research Vehicle With Control Surface Failures Using Quantitative Feedback Theory, Mark S. Keating

Theses and Dissertations

This thesis describes the application of the multiple-input multiple- output (MIMO) Quantitative Feedback Theory (QFT) design technique to the design of a digital flight control system for the Lambda Unmanned Research Vehicle (URV). The QFT technique allows the synthesis of a control system which is robust in the presence of structured plant uncertainties. Uncertainties considered in this design are the aircraft's plant variation within the flight envelope and the effects of damage to aircraft control surfaces. Mathematical models of control surface failure effects on aircraft dynamics are derived and used to modify an existing small perturbation model of the Lambda. …

Go to article

Enhanced Tracking Of Airborne Targets Using Forward Looking Infrared And Laser Return Measurements, Patrick J. Grondin Dec 1993

Enhanced Tracking Of Airborne Targets Using Forward Looking Infrared And Laser Return Measurements, Patrick J. Grondin

Theses and Dissertations

The Air Force Institute of Technology has been involved in developing Kalman filter based trackers of ballistic missiles for 15 years. The goal of this thesis is to develop a Multiple Model Adaptive Estimator MMAE that tracks the missile plume using a forward looking infrared sensor and the missile hardbody center-of-mass additionally using low energy laser returns for the purpose of directing a high power laser to incapacitate the missile. The missile plume pogos about an offset equilibrium point relative to the hardbody center-of-mass with an amplitude and frequency of oscillation that are not precisely known a priori. The MMAE …

Go to article

Synthetic Battlebridge: Information Visualization And User Interface Design Applications In A Large Virtual Reality Environment, Kirk G. Wilson Dec 1993

Synthetic Battlebridge: Information Visualization And User Interface Design Applications In A Large Virtual Reality Environment, Kirk G. Wilson

Theses and Dissertations

With shrinking budgets and fewer personnel, future military training will rely heavily on simulated environments. The goal for this training is to reduce cost while maintaining readiness and unparalleled capability for all levels of military command. This thesis effort, the Synthetic Battle Bridge SBB , provides a real-time simulated environment for military commanders to observe on-going computer simulations of varying participation levels and helps them wring the most from a simulation. The SBB, designed for higher ranking personnel with little time to spend learning how to run the system, must exhibit three capabilities ease-of-use, long-term retention, and adaptability. Based on …

Go to article

Satellite Attitude Determination Using Linear Combination Of Models, Martin S. Chin Dec 1993

Satellite Attitude Determination Using Linear Combination Of Models, Martin S. Chin

Theses and Dissertations

In satellite analysis, it is often necessary to determine the attitude of a satellite from a two dimensional image of the satellite. This thesis describes work performed to determine the attitude of a satellite relative to a reference position. The attitude is described in terms of the scaling, rotation and translation of the reference that will result in a pose that can be projected to form the image of interest. The techniques used are based on finding coefficients for the linear combination of basis images and decomposition of a composite transformation matrix. The methods were initially modeled in Mathematica and …

Go to article

Analyzing Adaptive Beamformer Performance In A Stable Multipath Environment, Mark Godino Dec 1993

Analyzing Adaptive Beamformer Performance In A Stable Multipath Environment, Mark Godino

Theses and Dissertations

Fighter aircraft equipped with X-Band radars having an adaptive beamforming capability exhibit degraded performance due to radome multipath reflection (RMR). The reflections from the radome into the antenna array degrade the pattern and cause the formation of large sidelobes. This phenomenon makes detection of LO targets difficult when jamming enters the high RMR sidelobes. Actual radomes are curved and cause reflected wavefronts to be nonplanar. Analyzing beamformer performance under these conditions is difficult, since the beamformer response is defined as the amplitude and phase change experienced by a complex plane wave as a function of frequency and location. To work …

Go to article

Development Of A Performance Evaluation Tool (Mmsofe) For Detection Of Failures With Multiple Model Adaptive Estimation (Mmae), Robert L. Nielsen Dec 1993

Development Of A Performance Evaluation Tool (Mmsofe) For Detection Of Failures With Multiple Model Adaptive Estimation (Mmae), Robert L. Nielsen

Theses and Dissertations

Multiple model Kalman Filter (KF) techniques are used extensively for Multiple Model Adaptive Estimation (MMAE), Multiple Model Adaptive Control (MMAC), and Distributed Kalman Filter (DKF) applications to determine Bayesian- blended optimal estimates of states, uncertain parameters, and optimal control signals. Multiple model methods are used for sensor management, Failure Detection and Isolation (FDI), and other Guidance and Control (G and C) applications. A simulation tool called the Multiple Model Simulation for Optimal Filter Evaluation (MMSOFE) has been in this research. MMSOFE is based on the well-benchmarked single Kalman filter tool called Multimode Simulation for Optimal Filter Evaluation (MSOFE). MMSOFE is …

Go to article

The Afit Multielectrode Array For Neural Recording And Simulation: Design, Testing, And Encapsulation, James R. Reid Jr Dec 1993

The Afit Multielectrode Array For Neural Recording And Simulation: Design, Testing, And Encapsulation, James R. Reid Jr

Theses and Dissertations

A two-dimensional, X-Y addressable, multiplexed array of 256 electrodes (16 x 16) has been fabricated using conventional semiconductor processing techniques. The individual electrodes are 16O microns x 160 microns, approximating the size of the cortical columns; the overall array size is 3910 microns x 3910 microns. The array has been fitted to a chronically implantable package and tested for several days in a simulated neural environment. EEG-like data were collected successfully from individual electrodes in the array. This array improves on a previous design of a 16 electrode (4 x 4) array that was chronically implanted on the cortex of …

Go to article

Neural Networks For Dynamic Flight Control, Ronald E. Setzer Dec 1993

Neural Networks For Dynamic Flight Control, Ronald E. Setzer

Theses and Dissertations

This thesis examines the application of artificial neural networks (NNs) to the problem of dynamic flight control. The specific application is the control of a flying model helicopter. The control interface is provided through a hardware and software test bed called the Fast Adaptive Maneuvering Experiment (FAME). The NN design approach uses two NNs: one trained as an emulator of the plant and the other trained to control the emulator. The emulator neural network is designed to reproduce the flight dynamics of the experimental plant. The controller is then designed to produce the appropriate control inputs to drive the emulator …

Go to article

Design Of A Subsonic Envelope Flight Control System For The Vista F-16 Using Quantitative Feedback Theory, Odell R. Reynolds Dec 1993

Design Of A Subsonic Envelope Flight Control System For The Vista F-16 Using Quantitative Feedback Theory, Odell R. Reynolds

Theses and Dissertations

A controlled plant's characteristics can vary widely throughout its operational envelope. This is a major problem in nominal plant-based control system design. Hence, gain scheduling is often used for full envelop design. In this paper, it is proposed to address the plant's variability using robust control design concepts. In particular, the frequency domain based Quantitative Feedback Theory Multiple-Input Multiple-Output robust control design method is employed for the synthesis of a full envelop flight control system for an F-16 derivative. Compensators for the aircraft's pitch and lateral directional channels are designed, and the designs are validated using linear simulations.

Go to article

Optical Wavelet Transform For Fingerprint Identification, Robert P. Macdonald Dec 1993

Optical Wavelet Transform For Fingerprint Identification, Robert P. Macdonald

Theses and Dissertations

The Federal Bureau of Investigation FBI has recently sanctioned a wavelet fingerprint image compression algorithm developed for reducing storage requirements of digitized fingerprints. This research implements an optical wavelet transform of a fingerprint image, as the first step in an optical fingerprint identification process. Wavelet filters are created from computer generated holograms of biorthogonal wavelets, the same wavelets implemented in the FBI algorithm. Using a detour phase holographic technique, a complex binary filter mask is created with both symmetry and linear phase. The wavelet transform is implemented with continuous shift using an optical correlation between binarized fingerprints written on a …

Go to article

Color Image Segmentation, Kimberley A. Mccrae Dec 1993

Color Image Segmentation, Kimberley A. Mccrae

Theses and Dissertations

The most difficult stage of automated target recognition ATR is segmentation. Current AFIT segmentation problems include faces and tactical targets previous efforts to segment these objects have used intensity and motion cues. This thesis develops a color preprocessing scheme to be used with the other segmentation techniques. A neural network is trained to identify the color of a desired object, eliminating all but that color from the scene. Gabor correlations and 2D wavelet transformations will be performed on stationary images and 3D wavelet transforms on multispectral data will incorporate color and motion detection into the machine visual system. The thesis …

Go to article

Human Visual System Enhancement Of Reconstructed Satellite Images, James E. Treleaven Dec 1993

Human Visual System Enhancement Of Reconstructed Satellite Images, James E. Treleaven

Theses and Dissertations

This research investigated the enhancement of satellite images. The goal was to develop and test a suite of image enhancement software routines to improve the quality of reconstructed images for the human visual system. The primary focus was to enhance satellite features. Enhancement was accomplished in both the spatial domain and the frequency domain. In the spatial domain, routines were developed to enhance image contrast and edges. In the frequency domain, a routine was developed using research into the human visual system. The transfer function of the human visual system was used to develop a filter for frequency domain enhancement. …

Go to article

Development Of Computer Software To Aid Environmental Decision Makers In The Education And Training Of Air Force Remedial Project Managers, Roger R. Ouellette, Bruce K. Lyman Dec 1993

Development Of Computer Software To Aid Environmental Decision Makers In The Education And Training Of Air Force Remedial Project Managers, Roger R. Ouellette, Bruce K. Lyman

Theses and Dissertations

By the end of Fiscal Year 1991, the Air Force had identified 4,354 contaminated sites. Much like the 177 toxic sites at McClellan AFB, bases across the country and throughput the world are filled with chrome, lead, paint solvents and many other toxics that are rendering water supplies unusable and endangering the health of millions of people living in and around these bases. Air Force officials continue to identify contaminated sites with no end in sight. Since the cleanup of these toxic materials involves diverse, complex activities, the Air Force created the duty position of Remedial Project Manager to manage …

Go to article

First Prev Next Last