Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Air Force Institute of Technology

Discipline
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 2821 - 2850 of 5700

Full-Text Articles in Engineering

Patterning And Characterization Of Carbon Nanotubes Grown In A Microwave Plasma Enhanced Chemical Vapor Deposition Chamber, Mauricio Kossler Mar 2009

Patterning And Characterization Of Carbon Nanotubes Grown In A Microwave Plasma Enhanced Chemical Vapor Deposition Chamber, Mauricio Kossler

Theses and Dissertations

This research studies the growth of carbon nanotubes (CNT) from a nickel catalyst to be used on a field emission device. This thesis can be divided into three sections: the construction of a vacuum chamber for field emission testing, the design and fabrication of a triode structure to enable improved electron emission, and the pretreatment and growth of CNTs. To experimentally test the field emission of CNTs, a vacuum chamber must attain a vacuum of at least 10-5 torr. Our vacuum chamber designed and built achieved a maximum, final pressure of 10-8 torr. A triode structure was designed …

Go to article

Project Scheduling To Maximize Positive Impacts Of Reconstruction Operations, Andrew D. Chaney Mar 2009

Project Scheduling To Maximize Positive Impacts Of Reconstruction Operations, Andrew D. Chaney

Theses and Dissertations

Since the decline of the Cold War, the risk of major conflict between powerful industrialized nations has significantly decreased. Insecurity in the twenty-first century is forecast to arise rather from the debris of imploding states. Such situations may require intervention | military or otherwise | by concerned states, and the frequency with which these interventions occur is increasing. To meet this new operational challenge, the US military must adapt its planning procedures to account for Security, Stabilization, Transition, and Reconstruction Operations (SSTRO). This research develops a project scheduling based framework for post-conflict reconstruction that prioritizes and schedules reconstruction activities in …

Go to article

An Advanced Tabu Search Approach To Solving The Mixed Payload Airlift Load Planning Problem, Robert Larry Nance Mar 2009

An Advanced Tabu Search Approach To Solving The Mixed Payload Airlift Load Planning Problem, Robert Larry Nance

Theses and Dissertations

This paper presents a new tabu search based two-dimensional bin packing algorithm which produces high quality solutions to the Mixed Payload Airlift Load Planning (MPALP) problem using C-5 and C-17 aircraft. This algorithm, called Mixed Payload Airlift Load Planning Tabu Search (MPALPTS), surpasses previous research conducted in this area because, in addition to pure pallet cargo loads, MPALPTS can accommodate rolling stock cargo (i.e. tanks, trucks, HMMMVs, etc.) while still maintaining aircraft feasibility with respect to aircraft center of balance, mandatory cargo separations, aircraft floor structural limitations, etc. Furthermore, while this research is currently restricted to C-5 and C-17 aircraft, …

Go to article

Radar Imaging With A Network Of Digital Noise Radar Systems, Ashley L. Schmitt Mar 2009

Radar Imaging With A Network Of Digital Noise Radar Systems, Ashley L. Schmitt

Theses and Dissertations

Today's battlefield consists of a blend of humans and machines working together to locate and monitor the enemy. Due to the threat of terrorism, today's enemy can be anyone and they can exist anywhere even in populated cities. Monitoring human activities in an urban environment is a difficult problem due to walls, clutter, and other obstructions. This thesis focused on developing a network of digital noise radar sensors that could operate simultaneously to track humans and non-human targets inside rooms and through walls. The theory, application, and results are discussed throughout this thesis. A noise radar works by cross correlating …

Go to article

Using Multiple Robust Parameter Design Techniques To Improve Hyperspectral Anomaly Detection Algorithm Performance, Matthew T. Davis Mar 2009

Using Multiple Robust Parameter Design Techniques To Improve Hyperspectral Anomaly Detection Algorithm Performance, Matthew T. Davis

Theses and Dissertations

Detecting and identifying objects of interest is the goal of all remote sensing. New advances, specifically in hyperspectral imaging technology have provided the analyst with immense amounts of data requiring evaluation. Several filtering techniques or anomaly detection algorithms have been proposed. However, most new algorithms are insufficiently verified to be robust to the broad range of hyperspectral data being made available. One such algorithm, AutoGAD, is tested here via two separate robust parameter design techniques to determine optimal parameters for consistent performance on a range of data with large attribute variances. Additionally, the results of the two techniques are compared …

Go to article

Architecting Human Operator Trust In Automation To Improve System Effectiveness In Multiple Unmanned Aerial Vehicles (Uav), Eric A. Cring, Adam G. Lenfestey Mar 2009

Architecting Human Operator Trust In Automation To Improve System Effectiveness In Multiple Unmanned Aerial Vehicles (Uav), Eric A. Cring, Adam G. Lenfestey

Theses and Dissertations

Current Unmanned Aerial System (UAS) designs require multiple operators for each vehicle, partly due to imperfect automation matched with the complex operational environment. This study examines the effectiveness of future UAS automation by explicitly addressing the human/machine trust relationship during system architecting. A pedigreed engineering model of trust between human and machine was developed and applied to a laboratory-developed micro-UAS for Special Operations. This unprecedented investigation answered three primary questions. Can previous research be used to create a useful trust model for systems engineering? How can trust be considered explicitly within the DoD Architecture Framework? Can the utility of architecting …

Go to article

Image Processing For Multiple-Target Tracking On A Graphics Processing Unit, Michael A. Tanner Mar 2009

Image Processing For Multiple-Target Tracking On A Graphics Processing Unit, Michael A. Tanner

Theses and Dissertations

Multiple-target tracking (MTT) systems have been implemented on many different platforms, however these solutions are often expensive and have long development times. Such MTT implementations require custom hardware, yet offer very little flexibility with ever changing data sets and target tracking requirements. This research explores how to supplement and enhance MTT performance with an existing graphics processing unit (GPU) on a general computing platform. Typical computers are already equipped with powerful GPUs to support various games and multimedia applications. However, such GPUs are not currently being used in desktop MTT applications. This research explores if and how a GPU can …

Go to article

The Modular Clock Algorithm For Blind Rendezvous, Nicholas C. Theis Mar 2009

The Modular Clock Algorithm For Blind Rendezvous, Nicholas C. Theis

Theses and Dissertations

This thesis examines the problem in initializing communications whereby cognitive radios need to find common spectrum with other cognitive radios, a process known as frequency rendezvous. It examines the rendezvous problem as it exists in a dynamic spectrum access cognitive network. Specifically, it addresses the problem of rendezvous in an infrastructureless environment. A new algorithm, the modular clock algorithm, is developed and analyzed as a solution for the simple rendezvous environment model, coupled with a modified version for environment models with less information. The thesis includes a taxonomy of commonly used environment models, and analysis of previous efforts to solve …

Go to article

Probabilistic Estimation Of Rare Random Collisions In 3-Space, Timothy Holzmann Mar 2009

Probabilistic Estimation Of Rare Random Collisions In 3-Space, Timothy Holzmann

Theses and Dissertations

A study of risk assessment for artillery fire randomly colliding with fixed wing aircraft is presented. The research lends itself to a general study of collision models. Current models of object collisions fall under one of three categories: the historical model, the gas particle model, and the satellite model. These three vary in data requirements and mathematical representation of the impact event. The gas particle model is selected for its flexibility and robust estimation. However, current mathematical development in the literature does not include certain spatial and dynamic components necessary for a general encounter (collision) model. These are derived in …

Go to article

A Cost Assessment Of The Dayton Public Schools Vehicle Routing Problem, Frankie L. Woods Jr. Mar 2009

A Cost Assessment Of The Dayton Public Schools Vehicle Routing Problem, Frankie L. Woods Jr.

Theses and Dissertations

The routing and scheduling problem involves both constructing efficient routes to deliver goods or services to and from customers from a single depot or set of depots, as well as scheduling particular vehicles to these routes such that customers receive their goods within a specified time window. There have been several different methods developed to reduce the costs incurred in transporting goods or services (i.e. students) to customers (i.e. schools). This problem may be used to model many circumstances in logistics and public transportation. Several school districts do not utilize operations research techniques to minimize, as much as possible, the …

Go to article

Thermomechanical Properties Of Center-Reinforced Aluminum, Geofrey S. Cox Mar 2009

Thermomechanical Properties Of Center-Reinforced Aluminum, Geofrey S. Cox

Theses and Dissertations

The rule of mixture approach was shown to produce an accurate theoretical prediction of the room temperature elastic modulus values when compared to the experimental results. The laminate's modulus value remained relatively constant over the -55C to 80C temperature range, indicating stable behavior despite temperature changes. Blunt notch tests also revealed that the laminate's strength was not significantly reduced due to the presence of small holes. Finally, fatigue testing demonstrated that the laminate retains its stiffness properties throughout its fatigue life, until failure.

Go to article

Effects Of Contact Load On The Fretting Fatigue Behavior Of In-100 At Elevated Temperature, Alfred G. Traylor Ii Mar 2009

Effects Of Contact Load On The Fretting Fatigue Behavior Of In-100 At Elevated Temperature, Alfred G. Traylor Ii

Theses and Dissertations

This thesis studied the effects of contact load of 8006 N on the fretting fatigue behavior of IN-100 at an elevated temperature of 600°C. First, S-N curves were created for a range of applied axial stresses at an identical stress ratio of 0.03 at 8006 N. A condition of partial slip condition necessary to fretting fatigue was verified by generating hysteresis loops, plotting shear force against axial stress. The half-contact width and the crack initiation location were determined for all of the fretting specimens using optical and scanning electron microscopes. The contact widths were consistent with expected analytical values and …

Go to article

Analysis And Application Of The Bi-Directional Scatter Distribution Function Of Photonic Crystals, Robert B. Lamott Mar 2009

Analysis And Application Of The Bi-Directional Scatter Distribution Function Of Photonic Crystals, Robert B. Lamott

Theses and Dissertations

Photonic crystals (PCs) are periodic structures built from materials with different refractive indices repeated at sub-wavelength intervals, which results in unusual optical characteristics, including narrowband laser protection, and zero reflectance and high absorption anomalies. Most of the research into the optical properties of PCs has concentrated only on the small range of wavelengths and angles where these effects occur. To better understand where all light leaving a PC is scattered, a Complete Angle Scatter Instrument was used to analyze the scatter from three Guided Mode Resonance Filters designed for laser protection. In the plane of incidence, measurements of the scatter …

Go to article

Wave Optics Simulation Of Optically Augmented Retroreflections For Monostatic/Bistatic Detection, John J. Tatar Iii Mar 2009

Wave Optics Simulation Of Optically Augmented Retroreflections For Monostatic/Bistatic Detection, John J. Tatar Iii

Theses and Dissertations

Optical devices interrogated with a laser in the appropriate band can exhibit strong, deterministic reflections of the incident beam. This characteristic could be exploited for optical target detection and identification. The distribution of reflected power is strongly dependent on the geometry of the interrogation scenario, atmospheric conditions, and the cross section of the target optical device. Previous work on laser interrogation systems in this area has focused on analytic models or testing. To the best of my knowledge, I am presenting for the first time an approach to predict reflected power for a variety of interrogation configurations, targets, and propagation …

Go to article

The Effects Of Temperature And Electron Radiation On The Electrical Properties Of Algan/Gan Heterostructure Field Effect Transistors, Jeffrey T. Moran Mar 2009

The Effects Of Temperature And Electron Radiation On The Electrical Properties Of Algan/Gan Heterostructure Field Effect Transistors, Jeffrey T. Moran

Theses and Dissertations

AlxGa1-xN/GaN Heterostructure Field Effect Transistors (HFETs) have come under increased study, in recent years, owing to their highly desirable material and electrical properties, ruggedness, and survivability even during and after exposure to extreme temperature and radiation environments. These devices or similar devices constructed of AlGaN and/or GaN materials are being researched for their potential applications in many military and space based systems. In this study, unpassivated and SiN passivated Al0.27Ga0.73N/GaN HFETs were subjected to electron radiation at incident energies of 0.5MeV and 1.0MeV and fluences from 5x1014 to 5x1015 [e-/cm …

Go to article

Exploitation Of Intra-Spectral Band Correlation For Rapid Feacture Selection And Target Identification In Hyperspectral Imagery, Michael K. Miller Mar 2009

Exploitation Of Intra-Spectral Band Correlation For Rapid Feacture Selection And Target Identification In Hyperspectral Imagery, Michael K. Miller

Theses and Dissertations

This research extends the work produced by Capt. Robert Johnson for detecting target pixels within hyperspectral imagery (HSI). The methodology replaces Principle Components Analysis for dimensionality reduction with a clustering algorithm which seeks to associate spectral rather than spatial dimensions. By seeking similar spectral dimensions, the assumption of no a priori knowledge of the relationship between clustered members can be eliminated and clusters are formed by seeking high correlated adjacent spectral bands. Following dimensionality reduction Independent Components Analysis (ICA) is used to perform feature extraction. Kurtosis and Potential Target Fraction are added to Maximum Component Score and Potential Target Signal …

Go to article

Model-Based Control Using Model And Mechanization Fusion Techniques For Image-Aided Navigation, Constance D. Hendrix Mar 2009

Model-Based Control Using Model And Mechanization Fusion Techniques For Image-Aided Navigation, Constance D. Hendrix

Theses and Dissertations

Unmanned aerial vehicles are no longer used for just reconnaissance. Current requirements call for smaller autonomous vehicles that replace the human in high-risk activities. Many times these activities are performed in GPS-degraded environments. Without GPS providing today's most accurate navigation solution, autonomous navigation in tight areas is more difficult. Today, image-aided navigation is used and other methods are explored to more accurately navigate in such areas (e.g., indoors). This thesis explores the use of inertial measurements and navigation solution updates using cameras with a model-based Linear Quadratic Gaussian controller. To demonstrate the methods behind this research, the controller will provide …

Go to article

Adaptive Pareto Set Estimation For Stochastic Mixed Variable Design Problems, Christopher D. Arendt Mar 2009

Adaptive Pareto Set Estimation For Stochastic Mixed Variable Design Problems, Christopher D. Arendt

Theses and Dissertations

Many design problems require the optimization of competing objective functions that may be too complicated to solve analytically. These problems are often modeled in a simulation environment where static input may result in dynamic (stochastic) responses to the various objective functions. System reliability, alloy composition, algorithm parameter selection, and structural design optimization are classes of problems that often exhibit such complex and stochastic properties. Since the physical testing and experimentation of new designs can be prohibitively expensive, engineers need adequate predictions concerning the viability of various designs in order to minimize wasteful testing. Presumably, an appropriate stochastic multi-objective optimizer can …

Go to article

Assessing Structural Health Monitoring Alternatives Utilizing A Value-Focused Thinking Model, Margaret A. Barker, Fatih S. Gurbuz, Jeremy A. Schroeder Mar 2009

Assessing Structural Health Monitoring Alternatives Utilizing A Value-Focused Thinking Model, Margaret A. Barker, Fatih S. Gurbuz, Jeremy A. Schroeder

Theses and Dissertations

Current Air Force operations are undergoing significant changes necessitated by increasing fiscal constraints, increasing aircraft age, and recent drawdown in personnel to perform maintenance, repair, and other necessary functions. In order to deal with these challenges, the Air Force must effectively improve current operations. This paper explores potential structural health monitoring (SHM) solutions to some of the challenges facing aircraft maintenance and repair operations. As with any problem, a variety of solutions exist and this paper explores the potential solutions and limitations of various options. Aircraft SHM is an intriguing concept with potential capability to revolutionize current Air Force maintenance …

Go to article

Host-Based Multivariate Statistical Computer Operating Process Anomaly Intrusion Detection System (Paids), Glen R. Shilland Mar 2009

Host-Based Multivariate Statistical Computer Operating Process Anomaly Intrusion Detection System (Paids), Glen R. Shilland

Theses and Dissertations

No abstract provided.

Go to article

Value-Driven Enterprise Architecture Score: Evaluation Applied To Joint Force Protection Future State Design, Larry D. Cotton, Gary A. Haase Mar 2009

Value-Driven Enterprise Architecture Score: Evaluation Applied To Joint Force Protection Future State Design, Larry D. Cotton, Gary A. Haase

Theses and Dissertations

This research presents a methodology to evaluate the quality of a system's architecture using principles drawn from Value-Focused Thinking (VFT) and resulting in a Value-Driven Enterprise Architecture Score (VDEA-Score). This is an overall numerical architecture quality score useful to a system's management team to identify the advantages and disadvantages of a system design and associated architecture documentation or to track its quality across discrete evaluation epochs. This effort determined which aspects of the architecture are most valuable to the stakeholder in the areas of (1) the system effectiveness values (quality of the instantiated system being represented and its ability to …

Go to article

Misregistration In Adaptive Optics Systems, Nathan D. Engstrom Mar 2009

Misregistration In Adaptive Optics Systems, Nathan D. Engstrom

Theses and Dissertations

An adaptive optics (AO) system is most effective when there is a known alignment between the wave front sensor (WFS) and the deformable mirror (DM). Misregistration is the term for the unknown alignment between the WFS and DM. Misregistration degrades system performance and can make the system unstable. An AO system uses a reconstruction matrix to transform WFS measurements into DM commands. A standard AO system uses a model reconstruction matrix that assumes perfect registration between the WFS and DM. The object of this research is to mitigate the negative effects of misregistration by using offline WFS measurements to create …

Go to article

Low Probability Of Intercept Waveforms Via Intersymbol Dither Performance Under Multipath Conditions, Jonathan K. Keen Mar 2009

Low Probability Of Intercept Waveforms Via Intersymbol Dither Performance Under Multipath Conditions, Jonathan K. Keen

Theses and Dissertations

This thesis examines the effects of multipath interference on Low Probability of Intercept (LPI) waveforms generated using intersymbol dither. LPI waveforms are designed to be difficult for non-cooperative receivers to detect and manipulate, and have many uses in secure communications applications. In prior research, such a waveform was designed using a dither algorithm to vary the time between the transmission of data symbols in a communication system. This work showed that such a method can be used to frustrate attempts to use non-cooperative receiver algorithms to recover the data. This thesis expands on prior work by examining the effects of …

Go to article

Mission Planning For Close-Proximity Satellites, Barry R. Witt Mar 2009

Mission Planning For Close-Proximity Satellites, Barry R. Witt

Theses and Dissertations

Given an initial orbit and a set of other orbits of interest, the lowest change in velocity "path" between them is of high value. Software was developed to visualize the change in velocity required from a user defined window of burn to a user defined window of intercept. The time between burn and intercept is unrestricted. Multiple intercepts require searching an n! solution space, research then is focused on ways to pick optimal choices without fully calculating out the cost of doing all possible combinations. Some code was translated from BASIC and the rest was newly developed in MATLAB. The …

Go to article

Ceramic Matrix Composite Characterization Under A Combustion And Loading Environment, Andrew R. Nye Mar 2009

Ceramic Matrix Composite Characterization Under A Combustion And Loading Environment, Andrew R. Nye

Theses and Dissertations

Lightweight materials that can withstand high temperatures and corrosive environments are constantly sought after in the aerospace industry, typically for Gas Turbine Engine (GTE) application. These materials need to retain their strength throughout the long service period they would see in the combustor and turbine components of a GTE. One material that is ideal for these types of applications is an oxide/oxide Ceramic Matrix Composite (CMC). The fatigue behavior of the oxide/oxide CMC NextelTM 720/Alumina (N720/A) was investigated in a unique high temperature environment. N720/A consisted of an 8-harness satin weave of NextelTM aluminum oxide/silicon oxide fibers bound …

Go to article

Creep And Fatigue Interaction Characteristics Of Pwa1484, Christian J. Pierce Mar 2009

Creep And Fatigue Interaction Characteristics Of Pwa1484, Christian J. Pierce

Theses and Dissertations

One of the main methods for predicting the service life of jet engine turbine blades is through creep analysis. A sample of the turbine blade material will be mechanically tested to characterize its creep performance. This characterization will be used to determine safe operating conditions for the material. While methods for modeling creep behavior are generally well developed, this constant load creep testing does not fully represent the loading conditions present in a jet engine due to cyclic loading caused by the mission profile and throttle movements. As the industry seeks to become more accurate in physics based modeling of …

Go to article

Production And Characterization Of High Repetition Rate Terahertz Radiation In Femtosecond-Laser-Induced Air Plasma, Michael L. Dexter Mar 2009

Production And Characterization Of High Repetition Rate Terahertz Radiation In Femtosecond-Laser-Induced Air Plasma, Michael L. Dexter

Theses and Dissertations

The purpose of this research was to produce and characterize high repetition rate terahertz radiation in ionized air plasma. An 800 nanometer, 50 femtosecond, 0.35 Watt, 40 KHz, pulsed Ti:Sapphire laser system was used as the source infrared beam. This beam was focused onto a second harmonic generation crystal to produce a collinear, perpendicularly polarized secondary beam at 400 nm. After realigning the polarization of the fundamental to the second harmonic and compensating for group velocity dispersion introduced by the optics, both beams were recombined and focused by a 3.75 cm focal length mirror to form an air plasma. An …

Go to article

Effects Of Environment On Creep Behavior Of Nextel720/Alumina-Mullite Ceramic Composite With ±45º Fiber Orientation At 1200ºc, Muzaffer Ozer Mar 2009

Effects Of Environment On Creep Behavior Of Nextel720/Alumina-Mullite Ceramic Composite With ±45º Fiber Orientation At 1200ºc, Muzaffer Ozer

Theses and Dissertations

The present effort will investigate the off-axis creep behavior of the Nexte720/Alumina-Mullite CMC, a material system which relies on a porous alumina/mullite matrix for damage tolerance as compared to the pure alumina matrix in earlier studies. This research evaluated the creep behavior of N720/AM with a ± 45° fiber orientation at 1200°C in: laboratory air, steam, and argon environments. Creep-rupture tests at the creep stress levels of: 32, 30, 26, and 20 MPa were conducted in each environment. Additionally 35 MPa stress level examined in air and 13 MPa stress level examined both in air and steam. The N720/AM with …

Go to article

A Comparative Study Of The Bidirectional Reflectance Distribution Function Of Several Surfaces As A Mid-Wave Infrared Diffuse Reflectance Standard, Bradley Balling Mar 2009

A Comparative Study Of The Bidirectional Reflectance Distribution Function Of Several Surfaces As A Mid-Wave Infrared Diffuse Reflectance Standard, Bradley Balling

Theses and Dissertations

The Bi-Directional Reflectance Distribution Function (BRDF) has a well defined diffuse measurement standard in the ultraviolet, visible, and near infrared (NIR), Spectralon(trade name). It is predictable, stable, repeatable, and has low surface variation because it is a bulk scatterer. In the mid-wave IR (MWIR) and long-wave IR (LWIR), there is not such a well-defined standard. There are well-defined directional hemispherical reflectance (DHR) standards, but the process of integrating BRDF measurements into DHR for the purpose of calibration is problematic, at best. Direct BRDF measurement standards are needed. This study use current calibration techniques to ensure valid measurements and then systematically …

Go to article

Electron Multipactor: Theory Review, Comparison And Modeling Of Mitigation Techniques In Icepic, Neil G. Rogers Mar 2009

Electron Multipactor: Theory Review, Comparison And Modeling Of Mitigation Techniques In Icepic, Neil G. Rogers

Theses and Dissertations

Mitigation approaches for single surface multipactor at dielectric windows are investigated using Particle-In-Cell (PIC) simulations. Initially baseline susceptibility diagrams are constructed analytically and compared with self-consistent, dynamic system trajectories. The power deposited on the surface of a dielectric window in an HPM system is considered using three different methods and the results of PIC simulations. Geometric mitigation is then considered by varying the window orientation with respect to the HPM electric held. Small angular deviations, less than 20 degrees, from the nominal case of normal incidence show dramatic changes in the susceptibility diagram. A materials approach to mitigation is then …

Go to article

First Prev Next Last