Engineering Commons^™

Corrosion Fatigue Crack Growth Behavior At Notched Hole In 7075-T6 Under Different Biaxial Stress Ratios, Khalid A. Alghamdi

Theses and Dissertations

This thesis presents the results of a study to quantify the effects of biaxial loading on fatigue crack behavior in both air and saltwater (3.5% NaCl) environments from pre-cracked notched circular hole in a 7075-T6 cruciform specimen using a fracture mechanics approach. With stress ratio of R = 0.5, the crack growth behavior was investigated under fatigue loading with 0.5, 0, -0.5, and -1 biaxial stress ratio lambda. The crack propagation was monitored using optical microscopy. Finite Element Analysis was performed using the different stress ranges and stress ratios with various crack sizes to compute of stress intensity factors (delta …

Mechanical Properties And Fatigue Behavior Of Unitized Composite Airframe Structures At Elevated Temperature, Mohamed Noomen

Theses and Dissertations

The tension-tension fatigue behavior of a newly developed unitized composite material system was investigated. The unitized composite consisted of a polymer matrix composite (PMC) co-cured with a ceramic matrix composite (CMC). The PMC portion consisted of an NRPE high-temperature polyimide matrix reinforced with carbon fibers woven in an eight harness satin weave (8HSW). The CMC layer is a single-ply non-crimp 3D orthogonal weave composite consisting of ceramic matrix reinforced with glass fibers. In order to assess the performance and suitability of this composite for use in aerospace components designed to contain high-temperature environments, mechanical tests were performed under temperature conditions …

Fusion Of Renewable Ring Resonator Lasers And Ultrafast Laser Inscribed Photonic Waveguides, Hengky Chandrahalim, Stephen C. Rand, Xudong Fan

Faculty Publications

We demonstrated the monolithic integration of reusable and wavelength reconfigurable ring resonator lasers and waveguides of arbitrary shapes to out-couple and guide laser emission on the same fused-silica chip. The ring resonator hosts were patterned by a single-mask standard lithography, whereas the waveguides were inscribed in the proximity of the ring resonator by using 3-dimensional femtosecond laser inscription technology. Reusability of the integrated ring resonator – waveguide system was examined by depositing, removing, and re-depositing dye-doped SU-8 solid polymer, SU-8 liquid polymer, and liquid solvent (toluene). The wavelength reconfigurability was validated by employing Rhodamine 6G (R6G) and 3,3′-Diethyloxacarbocyanine iodide (CY3) …

Thermal Management Using Mems Bimorph Cantilever Beams, Ronald A. Coutu Jr., Robert S. Lafleur, John P. Walton, Laverne A. Starman

Faculty Publications

This paper examines a passive cooling technique using microelectromechanical systems (MEMS) for localized thermal management of electronic devices. The prototype was designed using analytic equations, simulated using finite element methods (FEM), and fabricated using the commercial PolyMUMPs™ process. The system consisted of an electronic device simulator (EDS) and MEMS bimorph cantilever beams (MBCB) array with beams lengths of 200, 250, and 300 μm that were tested to characterize deflection and thermal behavior. The specific beam lengths were chosen to actuate in response to heating associated with the EDS (i.e. the longest beams actuated first corresponding to the hottest portion of …

Reconfigurable Liquid Attenuated Collimator, Larry W. Burggraf, Benjamin R. Kowash, Jack G. M. Fitzgerald

AFIT Patents

A reconfigurable radiographic aperture mask collimator apparatus includes a body portion configured to receive an attenuating liquid having a first attenuation value per unit volume. The apparatus further includes a grid portion mated to a face of the body portion and a plurality of passageways each having a cross sectional area and a length. The plurality of passageways is disposed within the grid portion. A plurality of plugs is slidably disposed within the plurality of passageways, and each of the plurality of plugs has a second attenuation value per unit volume less than the first attenuation value. One of the …

Direct Bandgap Cross-Over Point Of Ge1-YSnY Grown On Si Estimated Through Temperature-Dependent Photoluminescence Studies, Thomas R. Harris, Mee-Yi Ryu, Yung Kee Yeo, Buguo Wang, C. L. Senaratne

Faculty Publications

Epitaxial Ge_1-ySn_y (y = 0%–7.5%) alloys grown on either Si or Ge-buffered Si substrates by chemical vapor deposition were studied as a function of Sn content using temperature-dependent photoluminescence (PL). PL emission peaks from both the direct bandgap (Γ-valley) and the indirect bandgap (L-valley) to the valence band (denoted by E_D and EID, respectively) were clearly observed at 125 and 175 K for most Ge_1-ySn_y samples studied. At 300 K, however, all of the samples exhibited dominant E_D emission with either very weak or no measureable E_ID emission. At 10 K, …

A Hybrid Optimization Technique Applied To The Intermediate-Target Optimal Control Problem, Clay J. Humphreys, Richard G. Cobb, David R. Jacques, Jonah A. Reeger

Faculty Publications

The DoD has introduced the concept of Manned-Unmanned Teaming, a subset of which is the loyal wingman. Optimal control techniques have been proposed as a method for rapidly solving the intermediate-target (mid-point constraint) optimal control problem. Initial results using direct orthogonal collocation and a gradient-based method for solving the resulting nonlinear program reveals a tendency to converge to or to get `stuck’ in locally optimal solutions. The literature suggested a hybrid technique in which a particle swarm optimization is used to quickly find a neighborhood of a more globally minimal solution, at which point the algorithm switches to a gradient-based …

Surface Feature Engineering Through Nanosphere Lithography, Tod V. Laurvick, Ronald A. Coutu Jr., James M. Sattler, Robert A. Lake

Faculty Publications

How surface geometries can be selectively manipulated through nanosphere lithography (NSL) is discussed. Self-assembled monolayers and multilayers of nanospheres have been studied for decades and have been applied to lithography for almost as long. When compared to the most modern, state-of-the-art techniques, NSL offers comparable feature resolution with many advantages over competing technologies.

Nitrogen Rate And Landscape Impacts On Life Cycle Energy Use And Emissions From Switchgrass-Derived Ethanol, Eric G. Mbonimpa, Sandeep Kumar, Vance N. Owens, Rajesh Chintala, Heidi L. Sieverding, James J. Stone

Faculty Publications

Switchgrass-derived ethanol has been proposed as an alternative to fossil fuels to improve sustainability of the US energy sector. In this study, life cycle analysis (LCA) was used to estimate the environmental benefits of this fuel. To better define the LCA environmental impacts associated with fertilization rates and farm-landscape topography, results from a controlled experiment were analyzed. Data from switchgrass plots planted in 2008, consistently managed with three nitrogen rates (0, 56, and 112 kg N ha−1), two landscape positions (shoulder and footslope), and harvested annually (starting in 2009, the year after planting) through 2014 were used as input into …

Predictive Coupled-Cluster Isomer Orderings For Some SiNCM (M, N ≤ 12) Clusters: A Pragmatic Comparison Between Dft And Complete Basis Limit Coupled-Cluster Benchmarks, Jason N. Byrd, Jesse J. Lutz, Duminda S. Ranasinghe, Yifan Jin, Ajith Perera, Xiaofeng F. Duan, Larry W. Burggraf, John A. Montgomery Jr.

Faculty Publications

The accurate determination of the preferred Si₁₂C₁₂ isomer is important to guide experimental efforts directed towards synthesizing SiC nano-wires and related polymer structures which are anticipated to be highly efficient exciton materials for opto-electronic devices. In order to definitively identify preferred isomeric structures for silicon carbon nano-clusters, highly accurate geometries, energies and harmonic zero point energies have been computed using coupled-cluster theory with systematic extrapolation to the complete basis limit for set of silicon carbon clusters ranging in size from SiC₃ to Si₁₂C₁₂. It is found that post-MBPT(2) correlation energy plays a …

Wartime Construction Project Outcomes As A Function Of Contract Type, Ryan M. Hoff, Gregory D. Hammond, Peter P. Feng, Edward D. White

Faculty Publications

The United States has spent more than $23 billion on construction in Afghanistan since 2001. The dynamic security situation created substantial project uncertainty, and many construction projects used cost-plus-fixed-fee contracts (CPFF) instead of the firm-fixed-price (FFP) norm. Using a dataset of 25 wartime construction projects managed by the Air Force Civil Engineer Center, the authors sought to confirm that both contract types yield project outcomes consistent with the established literature. As expected, they found CPFF contracts had greater cost and schedule growth than FFP. However, they did not find differences regarding as-built quality. Additionally, the authors sought to determine whether …

An Advanced Tabu Search Approach To The Dynamic Airlift Loading Problem, August G. Roesener, J. Wesley Barnes

Faculty Publications

This research effort presents a tabu search algorithm to solve the dynamic airlift loading problem. Given a set of palletized cargo items which require transportation from an aerial port of embarkation to an aerial port of debarkation within a pre-specified time frame, the dynamic airlift loading problem seeks to partition the pallets into aircraft loads, select an efficient and effective subset of aircraft from available aircraft, and assign the pallets to allowable positions on those aircraft. The dynamic airlift loading problem differs from many partitioning and packing problems described in the literature because, in addition to spatial constraints, factors such …

Benefits Of Considering More Than Temperature Acceleration For Gan Hemt Life Testing, Ronald A. Coutu Jr., Robert A. Lake, Bradley D. Christiansen, Eric R. Heller, Christopher A. Bozada, Brian S. Poling, Glen D. Via, James P. Theimer, Stephen E. Tetlak, Ramakrishna Vetury, Jeffrey B. Shealy

Faculty Publications

The purpose of this work was to investigate the validity of Arrhenius accelerated-life testing when applied to gallium nitride (GaN) high electron mobility transistors (HEMT) lifetime assessments, where the standard assumption is that only critical stressor is temperature, which is derived from operating power, device channel-case, thermal resistance, and baseplate temperature. We found that power or temperature alone could not explain difference in observed degradation, and that accelerated life tests employed by industry can benefit by considering the impact of accelerating factors besides temperature. Specifically, we found that the voltage used to reach a desired power dissipation is important, and …

Preprocessing Techniques To Support Event Detection Data Fusion On Social Media Data, Brandon T. Davis

Theses and Dissertations

This thesis focuses on collection and preprocessing of streaming social media feeds for metadata as well as the visual and textual information. Today, news media has been the main source of immediate news events, large and small. However, the information conveyed on these news sources is delayed due to the lack of proximity and general knowledge of the event. Such news have started relying on social media sources for initial knowledge of these events. Previous works focused on captured textual data from social media as a data source to detect events. This preprocessing framework postures to facilitate the data fusion …

Using Approximate Dynamic Programming To Solve The Stochastic Demand Military Inventory Routing Problem With Direct Delivery, Ethan L. Salgado

Theses and Dissertations

A brigade combat team must resupply forward operating bases (FOBs) within its area of operations from a central location, mainly via ground convoy operations, in a way that closely resembles vendor managed inventory practices. Military logisticians routinely decide when and how much inventory to distribute to each FOB. Technology currently exists that makes utilizing cargo unmanned aerial vehicles (CUAVs) for resupply an attractive alternative due to the dangers of utilizing convoy operations. However, enemy actions, austere conditions, and inclement weather pose a significant risk to a CUAV's ability to safely deliver supplies to a FOB. We develop a Markov decision …

The Effects Of Ionizing Radiation And Oxidizing Species On Strains Of Deinococcus Radiodurans Lacking Endogenous Oxidative Protection Methods, Dylan L. Klawuhn

Theses and Dissertations

Multiple strains of Deinococcus radiodurans were transformed, creating knockout mutations in genes responsible for manganese ion transport, manganese and copper/zinc super-oxide dismutase, and bacillithiol synthesis. These mutated strains were then irradiated with ~20,000 Gys. The results showed that the mutated strains had a higher sensitivity to ionizing radiation, those responsible for bacillithiol synthesis having an increase in sensitivity 3000 times more than wild type Deinococcus radiodurans. In addition to radiation the mutated strains were also exposed to paraquat, an oxidizing herbicide. Strains missing manganese super-oxide dismutase showed increased sensitivity.

Efficient Employment Of Large Format Sensor Data Transfer Architectures, Jeffrey R. Oltmanns

Theses and Dissertations

Due to the increasing quantity of data collected by Air Force intelligence, surveillance and reconnaissance (ISR) assets and the focus on timely access to the data collected by these systems, operational data transfer network architectures have become a critical component of their employment in the intelligence production process. Efficient utilization of the provided long-haul communications component of the ISR system improves the value of the single asset to the warfighter and enables connectivity of additional assets via the data transfer network architecture. This research effort focused on the creation and implementation of a structured test design methodology based on the …

Design And Experimentation Of A Premixed Rotating Detonation Engine, Ionio Q. Andrus

Theses and Dissertations

Desire for a more efficient air breathing engine has shifted research attention to the Rotating Detonation Engine (RDE). Detonation is a more efficient combustion process than deflagration and provides a pressure gain. The RDE detonation cycle occurs in a compact volume to produce a high specific impulse engine. Computational fluid dynamic (CFD) models have predicted higher specific impulse and detonation wave speeds than has been seen in experimental RDE. The CFD models frequently assume premixed reactants and ignore inlet geometries to facilitate rapid computation. An experimental premixed RDE was sought to test if the premixed assumption in CFD was the …

Test And Verification Of A Cubesat Attitude Determination And Control System In Variable Magnetic Fields, Eric A. Bassett

Theses and Dissertations

The Center for Space Research and Assurance (CSRA) at the Air Force Institute of Technology (AFIT) continues to explore CubeSat initiatives for solving many current space security issues. Regardless of the mission requirements, the success of the Cube- Sat on orbit frequently depends on the Attitude Determination and Control System (ADCS) functioning correctly. Previous research at AFIT has demonstrated single axis control on a spherical air bearing test bed incorporated within a Helmholtz cage utilizing artificially strong magnetic fields for better signal to noise ratios which are not experienced on orbit. This research explores the process of redesigning, testing, and …

Meeting The Dod’S Tactical Weather Needs Using Cubesats, Shayna K. Mckenney

Theses and Dissertations

This thesis investigates a CubeSat design that uses Commercial-Off-The-Shelf (COTS) components to capture, store, process, and downlink collected terrestrial weather data at resolutions near stat-of-the-art. The weather phenomena to be detected and transmitted in a timely manner are cloud formations, wind profiles, ocean currents, sea state, lightning, temperature profiles, and precipitation. It is hypothesized and shown that the proposed design will provide an improvement on the current U.S. tactical weather collection satellites because of the anticipated increased reliability and lowered cost to build and maintain the proposed CubeSat constellation. The methodology employed a multi-phase approach through the collective research of …

Microfacet Wavelength Scaling Of The Brdf, Samuel E. Freda

Theses and Dissertations

The bidirectional reflectance distribution function (BRDF) describes realistic scattering of light off materials by relating incident irradiance to outbound radiance. One popular class of BRDF models assumes a surface is comprised of tiny microfacets. The drawback of microfacet BRDFs is that they often no not contain specific material parameters and neglect wavelength effects. Wave optics BRDF expressions, however, can describe wavelength effects at the expense of being more computationally cumbersome. Previous work of following a Beckmann-Kirchhoff derivation of BRDF, then relating wave optics BRDF coordinates to microfacet coordinates led to a complicated, but versatile, BRDF. In this work, the infinite …

Design, Manufacturing, And Testing Of A Small Through-Flow Wave For Use Within The Brayton Cycle, Micahel J. Mcclearn

Theses and Dissertations

With the ever growing popularity of drones and other unmanned aerial vehicles for military, commercial, and private usage, there is a desire to improve performance in terms of range, altitude, and flight speed. Current technology uses either electric motors or internal combustion engines: both piston and jet engine types. These sorts of engines undergo significant efficiency degradation as their size decreases. While some efficiency may be recovered via intensive design studies, the cycles are approaching the limit to their operating physics. A possible solution to this is to change the operating physics to something more immune to scaling losses; a …

An Investigation In Construction Cost Estimation Using A Monte Carlo Simulation, Jeffrey D. Buchholtz

Theses and Dissertations

The Air Force estimates military construction (MILCON) costs early in a project’s development as a part of the funding approval process. However, many of the initial cost estimates deviate significantly more than expected from the actual project costs, hindering funding allocation efforts. There is a need for improved estimation techniques. This research examines a cost estimation model for the initial programming stages of a project when only general scope information is available.

This study develops a Monte Carlo simulation based on historical construction cost data to predict project costs base on facility type. For a given facility type, the research …

Short-Term Building Energy Model Recommendation System: A Meta-Learning Approach, Can Cui, Teresa Wu, Mengqi Hu, Jeffery D. Weir, Xiwang Li

Faculty Publications

High-fidelity and computationally efficient energy forecasting models for building systems are needed to ensure optimal automatic operation, reduce energy consumption, and improve the building’s resilience capability to power disturbances. Various models have been developed to forecast building energy consumption. However, given buildings have different characteristics and operating conditions, model performance varies. Existing research has mainly taken a trial-and-error approach by developing multiple models and identifying the best performer for a specific building, or presumed one universal model form which is applied on different building cases. To the best of our knowledge, there does not exist a generalized system framework which …

Air Mobility Future: Evolving Command And Control Relationships In The Information Age, Ian M. Slazinik

Theses and Dissertations

This research paper analyzes information flow through theater Air Mobility Command and Control (C2) organizations. The purpose is to uncover guidelines going forward to adapt organizational structure and processes to increase the speed and reach of information. These guidelines could assist with improving organizational agility and decision making while adapting to future trends in the broader C2 enterprise. To collect data, the researcher conducted interviews with seventeen C2 experts with experience at various levels of C2, from worldwide to theater Air Mobility C2 organizations, from Air Mobility C2 leadership, to experts in non-mobility C2 divisions. Interview subjects shared their perceptions …

Investigation Of Thermal Scaling Effects For A Turbine Blade Leading Edge And Pressure Side Model, Ryan A. Lynch

Theses and Dissertations

Recent experiments have attempted to quantify the overall cooling effectiveness at elevated temperature conditions. The Film Cooling Rig (FCR) at the Air Force Institute of Technology has been modified to better match the configuration of a similar large scale, low temperature rig at the Air Force Research Laboratory. This has enabled comparison and trend identification of how various properties scale from the low to high temperature condition. Various internal cooling and hole geometry configurations were investigated over a range of temperatures while utilizing the thermal scaling capability of Inconel 718. Film cooling trends and measures of overall effectiveness were matched, …

Unequal A Priori Probability Multiple Hypothesis Testing In Space Domain Awareness With The Space Surveillance Telescope, Tyler J. Hardy, Stephen C. Cain, Travis F. Blake

Faculty Publications

This paper investigates the ability to improve Space Domain Awareness (SDA) by increasing the number of detectable Resident Space Objects (RSOs) from space surveillance sensors. With matched filter based techniques, the expected impulse response, or Point Spread Function (PSF), is compared against the received data. In the situation where the images are spatially undersampled, the modeled PSF may not match the received data if the RSO does not fall in the center of the pixel. This aliasing can be accounted for with a Multiple Hypothesis Test (MHT). Previously, proposed MHTs have implemented a test with an equal a priori prior …

Investigation Of 186Re Via Radiative Thermal-Neutron Capture On 185Re, David A. Matters, Andrew G. Lerch, A. M. Hurst, L. Szentmiklosi, J. J. Carroll, B. Detwiler, Zs. Revay, John W. Mcclory, Stephen R. Mchale, R. B. Firestone, B. W. Sleaford, M. Krticka, T. Belgya

Faculty Publications

Partial ��-ray production cross sections and the total radiative thermal-neutron capture cross section for the ¹⁸⁵Re(n,��)¹⁸⁶Re reaction were measured using the Prompt Gamma Activation Analysis facility at the Budapest Research Reactor with an enriched ¹⁸⁵Re target. The ¹⁸⁶Re cross sections were standardized using well-known ³⁵Cl(n,��)³⁶Cl cross sections from irradiation of a stoichiometric ^natReCl₃ target. The resulting cross sections for transitions feeding the ¹⁸⁶Re ground state from low-lying levels below a cutoff energy of E_c=746keV were combined with a modeled probability of ground-state feeding from levels above E …

The Impact Of Learning Curve Model Selection And Criteria For Cost Estimation Accuracy In The Dod, Candace Honious, Brandon Johnson, John J. Elshaw, A. B. Badiru

Faculty Publications

The first part of this manuscript examines the impact of configuration changes to the learning curve when implemented during production. This research is a study on the impact to the learning curve slope when production is continuous but a configuration change occurs. Analysis discovered the learning curve slope after a configuration change is different from the stable learning curve slope pre-configuration change. The newly configured units were statistically different from previous units. This supports that the new configuration should be estimated with a new learning curve equation. The research also discovered the post-configuration slope is always steeper than the stable …

Method For Determining Time-Resolved Heat Transfer Coefficient And Adiabatic Effectiveness Waveforms With Unsteady Film Cooling, James L. Rutledge, Jonathan F. Mccall

AFIT Patents

A new method for determining heat transfer coefficient (h) and adiabatic effectiveness (η) waveforms h(t) and η(t) from a single test uses a novel inverse heat transfer methodology to use surface temperature histories obtained using prior art approaches to approximate the h(t) and η(t) waveforms. The method best curve fits the data to a pair of truncated Fourier series.