Engineering Commons^™

Air Distribution Simulation And Comfort Evaluation Of Large Space Building Based On Rans And Les, Shen Zhang, Ming Cheng, Yifan Wang, Fankai Meng, Ting Li, Han Chen, Zhifeng Ji

Journal of System Simulation

Abstract: Air distribution simulation and thermal comfort evaluation for heating, ventilation and air conditioning (HVAC) design of large space buildings is of great significance for the human thermal comfort improvement and the energy consumption reduction. By combining the steady analysis based on RANS and the transient analysis of large eddy simulation (LES), an air distribution simulation and thermal comfort evaluation process in large space buildings is established. Due to the low calculation consumption, the steady analysis based on RANS is conducted to efficiently evaluate the thermal comfort and the air quality under multiple working conditions. Considering the high computational consumption …

A Fuzzy Group Decision-Making-Based Method For Green Supplier Selection And Order Allocation, Lu Liu, Wenxin Li, Xiao Song, Bingli Sun, Guanghong Gong

Journal of System Simulation

Abstract: With the intensity of market competitiveness, the worsening of the global environment, and the improvement of public concern about environmental protection, the issue of green purchasing has received considerable attention. The vast majority of existing studies on green purchasing have concentrated on supplier selection with green criteria, so as to realize sustainable operations, whereas it is more feasible and economical for businesses to obtain the proper products from adaptable and suitable suppliers at the right times, rates, and volumes, which is referred to as supplier selection and order allocation. To resolve the aforementioned two crucial challenges, we propose a …

An Automatic Code Generation Method For Generic Real-Time Hardware-In-The-Loop Simulation Based On Custom Wizard, Zihan Liu, Lingxiao Hou, Yang Li, Zhiguang Wang, Wulong Zhang

Journal of System Simulation

Abstract: For the capability improvement demands of automation and generalization hardware-in-theloop simulation system, an automatic code generation method for generic real-time hardware-in-the-loop simulation based on custom wizard is proposed. A modular and universal code template-based frame documents and professional resource library are constructed with years of technical accumulation in hardware-in-the-loop simulation. The responsive front-ends and scripts are designed by HTML, CSS and JavaScript and an universal automatic code generation software AutoSimRTX is developed, which effectively supports the construction of hardware-in-the-loop simulation system.

Quality Control For Net Zero Energy Modular (Nzem) Homes And In-Factory Solar Plus Storage (Sps) System, Min Bahadur Pun Kayat

LSU Master's Theses

A Net Zero Energy Modular (NZEM) home provides an opportunity to achieve the quality and cost savings benefits of modular construction of zero energy homes. Compared to traditional code-built homes, the NZEM home has a better insulation system, leakage-proof envelope system, energy efficient lights and appliances, high-performance windows, and solar plus storage (SPS) system. The onsite construction industry is scrutinized for its poor productivity and quality standards compared to other sectors. In NZEM construction, the factory environment removes issues that can arise during onsite construction, including weather delays and material damage, leading to higher production costs. Most factories currently use …

Knowledge Integration In Domain-Informed Machine Learning And Multi-Scale Modeling Of Nonlinear Dynamics In Complex Systems, Phat K. Huynh

USF Tampa Graduate Theses and Dissertations

Nonlinear dynamical systems have been extensively used to model various phenomena in the changing world around us, especially in science and engineering fields. Thanks to breakthrough advancements in sensing technologies, an increasingly high volume of multi-modal sensor data has been collected, which enables us gain better insights into complex systems dynamics and build sophisticated data-driven machine-learning-based dynamic models without having the access to the underlying governing equations. However, integrating domain-specific knowledge in machine learning algorithms remains pivotal for various reasons: it promises enhanced predictive accuracy, better model interpretability, and increased generalizability. This dissertation delves into three core research questions, each …

The Aging Workforce: How It Relates To Incident Rates Within A Distribution Warehouse And A Chemical Manufacturing Building, Elisabeth V. Jones

USF Tampa Graduate Theses and Dissertations

Over the past 20 years or so, the average age of the global population has slowly increased. This is due to low birth rates as well as increased life expectancy. With this global population aging, there has also been a shift in the global labor market causing a trend termed the “aging workforce.” However, with the aging workforce comes a new set of issues for the health and safety professional because they create new hazards. This is due mostly because of the body undergoing physical, psychological, and cognitive decline as someone ages which causes decreased capabilities. Thus, the purpose of …

The Impact Of Enterprise Resource Planning (Erp) Implementation On Performance Of Firms: A Case To Support Production Process Improvement., Kareem A. El-Baz, Tawfik T. El-Midany, Magdy S. Ghattas, Mona A. Aboueleaz

Mansoura Engineering Journal

Competitive globalization and automated process management through a functional information platform that supports technologies such as enterprise resource planning (ERP) are critical to improving the performance of any business. Research studies show that a large number of (ERP) projects fail during implementation. Other studies have shown that the effectiveness of ERP implementation in improving production processes is modest or low, even for well-designed systems. This study takes an in-depth look at the critical success factors of ERP implementation that impact business success, and conducts a case study to analyze the results obtained and assess their impact on performance.

Vistac Toward A Unified Multimodal Sensing Finger For Robotic Manipulation, Sheeraz Athar, Gaurav Patel, Zhengtong Xu, Qiang Qiu, Yu She

School of Industrial Engineering Faculty Publications

Tactile sensors are crucial in providing contact geometry information necessary for object manipulation. However, it remains highly nontrivial for a tactile sensor to be able to perceive a distant object before manipulation. In this work, we present an innovative robotic finger, VisTac, which seamlessly combines high-resolution tactile and visual perception in a single unified device, while adhering to essential mechanical constraints, such as a human-finger-like wedge-shaped top, vital for manipulation tasks. Furthermore, we discuss the fabrication of a key component in the device; the semitransparent membrane with light-dependent opacity, thus enabling the contact surface to effortlessly transition between visual and …

Cyber-Physical Multi-Robot Systems In A Smart Factory: A Networked Ai Agents Approach, Zixiang Nie

USF Tampa Graduate Theses and Dissertations

This dissertation focuses on addressing the technical challenges of non-stationarity in smart factories through the use of cyber-physical AI agents. Industry 4.0 and smart manufacturing with smart factories as a central role, have a growing demand for Just-in-Time (JIT) and on-demand production, as well as mass customization—all while maintaining high productivity, resource efficiency and resilience. This research positions Multi-Robot Systems (MRS)-driven smart factories. The heterogeneous production and transportation robots in an MRS collaborate to form multiple real-time adjusted production flows achieving the flexibility to accommodate such on-demand, mass customization.

However, the implementation of MRS introduces new sets of challenges, including …

Reducing Uncertainty In Sea-Level Rise Prediction: A Spatial-Variability-Aware Approach, Subhankar Ghosh, Shuai An, Arun Sharma, Jayant Gupta, Shashi Shekhar, Aneesh Subramanian

I-GUIDE Forum

Given multi-model ensemble climate projections, the goal is to accurately and reliably predict future sea-level rise while lowering the uncertainty. This problem is important because sea-level rise affects millions of people in coastal communities and beyond due to climate change's impacts on polar ice sheets and the ocean. This problem is challenging due to spatial variability and unknowns such as possible tipping points (e.g., collapse of Greenland or West Antarctic ice-shelf), climate feedback loops (e.g., clouds, permafrost thawing), future policy decisions, and human actions. Most existing climate modeling approaches use the same set of weights globally, during either regression or …

Software Maintenance: Planning A Server Upgrade - A Library Perspective, Wilhelmina Randtke, Melissa Jackson

University Libraries: Faculty Presentations

Like many libraries, the Georgia Southern University Libraries (GS Libraries) rely on tools to support library services which are run on in-house servers. The servers are run by main campus Information Technology Services (ITS), and ITS is not familiar with how each piece of software is used and how it is supposed to work. ITS monitors the basic high level server architecture but does not work with the actual applications installed on these servers.

Tools like EZProxy and ILLiad are mission critical and are run in-house. Over the past year, the GS Libraries have formalized an upgrade process for the …

Mindfulness And Workplace Safety: An Integrative Review, Zihan Liu, Kevin Hoff, Erica Baranski, Galen Snyder, Rhona Flin, Peggy Lindner, Christiane Spitzmueller

Engineering Management and Systems Engineering Faculty Research & Creative Works

Mindfulness has recently gained popularity in applied settings to enhance workplace safety, especially in safety-critical occupations such as healthcare and construction. In this review, we synthesize existing research across disciplines to establish a theoretical model of mindfulness and safety. Based on 32 empirical studies, we first summarize and critically analyze how mindfulness and safety are conceptualized and operationalized in the literature. We then consolidate empirical findings and conceptual arguments and draw upon the job demands–resources model to propose a theoretical model linking the basic benefits of mindfulness to safety-related job demands. Specifically, we propose that mindfulness (a) improves detection of …

Exploring Cognition And Affect During Human-Cobot Interaction, Angelika T. Canete, Javier Gonzalez-Sanchez, Rafael Guerra Silva

College of Engineering Summer Undergraduate Research Program

Collaborative robots (Cobots) have recently gained popularity due to their capability to work collaboratively with human operators. This collaborative relationship has been named under the robotics discipline of Human-Robot Collaboration (HRC), in which humans and robots work together to accomplish a common task while also being in the same physical space. An important part of collaboration is the human's decision-making, which is largely affected by their affective and cognitive state. A cobot lacks this fundamental understanding of the human operator. In this research, we utilize a server-client program to communicate the affective states of a human user to a Raspberry …

Towards Agile Academia: An Approach To Scientific Paper Writing Inspired By Software Engineering, Tyler Procko

Doctoral Dissertations and Master's Theses

The construction of scientific papers is performed in service of the greater scientific community. This iterative process is, in effect, an academic economy, where all members benefit from well-written papers. However, many published scientific papers are poorly written; they often lack sufficient detail to allow replication, there is improper usage of citations or a lack of regard to relevant work, reporting is vague or without linked empirical data to allow verification, figures do not correspond to text or are non-sensical, literary elements, e.g., bulleted lists, are used ineffectively, formatting renders certain sections unreadable, and grammatical errors abound. The issues of …

Designing A Cylindrical Capacitive Based Sensor For Monitoring The Table Salt’S Moisture Content During Iodization, Mwajuma Lungo

Tanzania Journal of Engineering and Technology (TJET)

Coaxial cylinder capacitive moisture sensor for determination of moisture content of table salts has been fabricated. The CMS method for determination of moisture content of table salts overcomes the effect of evaporation of iodine in table salt which results from heating in the oven drying method. The CMS overcomes the polarization effect result from the resistive methods of moisture content determination and it is non expensive to construct and it has high accuracy since measurements involves programming system in interpretation of the results. In this research, moisture content sensor based on capacitive principal created using two coaxial cylinders with height …

Numerical Study Of Solar Receiver Tube With Modified Surface Roughness For Enhanced And Selective Absorptivity In Concentrated Solar Power Tower, Shawn Hatcher, Mathew Z. Farias, Jianzhi Li, Peiwen Li, Ben Xu

Manufacturing & Industrial Engineering Faculty Publications

Concentrated solar power (CSP) is a reliable renewable energy source that is progressively lowering its cost of energy. However, the heat loss due to reflected and emitted radiation hinders the maximum achievable thermal efficiency for solar receiver tubes on the solar tower. Current solar selective coatings cannot withstand the high temperatures that come with state-of-the-art CSP towers often needing to be recoated soon after initial operation. We intend to use Inconel 718 with different additive manufacturing (AM) practices to construct surfaces that allow for more light-trapping to occur. By adjusting printing parameters, we can tailor a surface to allow for …

3d Garment Collision Simulation Based On Human Skeletal Features, Yuanyuan Chen, Yongjian Huai, Xiaoying Nie, Ke Lang

Journal of System Simulation

Abstract: In order to enhance the realism of garment and human body collision in real-time fabric simulation, an automated human body fitting collision method based on the bounding box and mesh method is proposed. According to the human skeletal structure and garment type, the skeletal information involved in collision simulation is effectively optimized, so as to better obtain the feature points of the human body and semantically segment them. According to the characteristics of skinning animation, simple capsule colliders and mesh colliders are generated to fit the geometric shape of the human body, and the dynamic following of colliders is …

Research On Support Effectiveness Evaluation Method Of Equipment Systems Based On Pert And Abms, Shanzhi Ma, Hongliang Wang, Hua He, Weicheng Lun

Journal of System Simulation

Abstract: The support of an equipment system directly affects its combat effectiveness, and the support effectiveness evaluation of equipment systems has the characteristics of large scope, multiple levels, complete elements, and long process. According to the systematic combat requirements of aircraft equipment, the difficulties in evaluating the support effectiveness of aircraft equipment systems are analyzed. The PERT-based modeling method of airfield support is proposed, and the PERT-based process model of equipment system support activity is established according to the modeling requirements and sequential characteristics of aircraft equipment support tasks. The operational model framework of combinable equipment systems based on ABMS …

Simulation Research On Multi-Antenna Coupled Radiation Of Launch Vehicle In Tower, Fen Zhang, Tao Yu, Yong Han, Longwei He

Journal of System Simulation

Abstract: The signal radiation of the launch vehicle wireless system test in the closed tower of the launching site is very complex. In order to further study the antenna radiation characteristics, especially the multi-antenna coupled radiation in the whole vehicle state, a multi antenna model with tower-vehicle body is established in this paper based on UG modeling technology and Altair Hyper Works 2017 electromagnetic compatibility simulation platform. It involves the method of moments-physical optics (MOM-PO) hybrid algorithm and delineates different calculation areas for different scale divisions, so as to solve quickly and accurately electromagnetic parameters of multi-antenna coupled radiation. The …

Research On Flight Route Planning For Specific Multi-Missions, Lin Zhong, Ming'an Tong, Sheng Li

Journal of System Simulation

Abstract: In order to complete specific aviation missions, a flight route planning model for specific multi-missions is presented. The grid method is used to build a battlefield environment model. Accordingto the complex and real battlefield environment and operational requirements, five target route planning models including distance, fuel consumption, mission completion, ground-to-air threat, and air-to-air threat are proposed. On the basis of specific mission demands, several requirements for missions are analyzed, and the index of mission completion is presented. According to the problem's characteristics, the two-stage solution algorithm for route planning is proposed. In the first stage, the multi-mission sequence is …

Cloud-Edge Collaborative Service Architecture For Lvc Training System, Peng Yong, Miao Zhang, Yue Hu

Journal of System Simulation

Abstract: LVC training, an important means of military training, has received great attention from military and M&S experts. As the virtual and physical elements become more abundant and deeply integrated, LVC training systems become increasingly complex. Aiming at physical-virtual connection, information interaction, simulation computation, run-time control, etc., this paper designs a cloud-edge collaborative service architecture for LVC training systems (CESA-LVC) by reference to cyber-physical systems and cloud-edge computing architectures. CESA-LVC standardizes the structures of LVC training systems from several aspects of intelligent real-time interconnection, joint simulation computation, training auxiliary service, training cognitive decision, and dynamic configuration optimization. It provides a …

Rgb-D Saliency Object Detection Based On Cross-Refinement And Circular Attention, Qingqing Dong, Hao Wu, Wenhua Qian, Fengling Kong

Journal of System Simulation

Abstract: In order to solve the problems that the boundary of the saliency object detection area is vague, and the detection area is incomplete or inaccurate, an RGB-D saliency object detection method based on cross-refinement and circular attention is proposed. A cross-refinement module is designed at the stage of extracting features using encoders, which is used to supplement feature information of each other and improve the feature quality before fusion. It also suppresses the negative impact of poor-quality depth maps and addresses the issue that the edges of the saliency object are blurred. For the features after fusion, the circular …

Data Generation Model-Based Synthetic Sample Imputation Method, Yulin He, Jiaqi Chen, Hepeng Xu, Zhexue Huang, Jianfei Yin

Journal of System Simulation

Abstract: In order to solve the problem of inconsistent probability distribution between synthetic samples by imputation and real samples, a data generation model-based synthetic sample imputation (DGM-SSI) method is proposed. The data generation model of real samples is constructed based on the Gaussian mixture model, and the number of corresponding components of the Gaussian mixture model is determined by the multi-model fusion strategy. The synthetic samples required for model imputation are generated by using the data obtained from the real samples. Specifically, the components of the data generation model and their weights are used to control the generation of synthetic …

Research On Hierarchical Motion Planning Method For Uav Substation Inspection, Songming Jiao, Yunfeng Shou, Jianpeng Bai, Zhu Wang

Journal of System Simulation

Abstract: In order to improve the efficiency and quality of unmanned aerial vehicle (UAV) substation inspection, a hierarchical motion planning method for UAV inspection based on front-end path search and back-end trajectory generation is proposed. At the front end, an improved A* algorithm is proposed to increase the planning speed and reduce the path turnings by constraining the direction of node expansion and modifying the heuristic function. At the back end, a minimum-snap trajectory optimization combined with the waypoint filtering method is proposed to generate a smooth trajectory that is beneficial for UAV inspection and tracking. The simulation results show …

Aircraft Assignment Method For Optimal Utilization Of Maintenance Intervals, Runxia Guo, Yifu Wang

Journal of System Simulation

Abstract: The aircraft assignment problem is studied from a maintenance assurance perspective. In order to ensure its continuous airworthiness, civil aircraft are required to perform maintenance tasks, i. e., scheduled inspections, at specified intervals. The scheduled inspection interval is usually controlled by the number of flight cycles (FC), flight hours (FH), or flight days (FD), whichever comes first. In order to make balanced use of the inspection interval, an aircraft assignment model for a given fleet size is developed to optimize the maintenance interval utilization, and it is solved by a reinforcement learning algorithm to minimize the variance of the …

Fall Detection Method Of Digital Sequence Based On Fusion Strategy, Riming Sun, Hu Guo, Li Zou, Jiaqi Mao, Shengfa Wang

Journal of System Simulation

Abstract: Falls have become the primary cause of disability due to injury for the elderly. Timely and accurate warning of fall events is an important link to rescue work. In order to improve the accuracy of fall detection, a fall detection method based on a fusion strategy is proposed, which considers both the integrity of high-dimensional digital sequences and the specificity of different dimensions. The input digital sequences obtained from the wrist portable sensor are processed by window segmentation according to the saliency of resultant acceleration, so as to ensure the timing of the data and improve the identifiability of …

Virtual Navigation Path Planning Based On Octree Potential Field For Endonasal Endoscope, Wenjing Li, Yanlin Luo, Yuhui Wang, Li Zhu

Journal of System Simulation

Abstract: Virtual navigation can intuitively display the internal structure of human tissue from multiple viewpoints. The navigation path planning algorithm is the key to achieving excellent navigation effects. The traditional centerline extraction algorithm can ensure a wide field of view during navigation, but the time efficiency is not high enough on the complex nasal-skull base volume model. To solve the problem, a rapid navigation path planning algorithm based on the octree potential field is proposed. The space outside the obstacles is modeled by an octree, and the octree potential field is constructed by calculating the potential of all the octree …

Training Simulation Scenario Generation Based On Particle Swarm Optimization, Jianxing Gong, Zimu Wang, Qilong Yang

Journal of System Simulation

Abstract: The training effect in the training simulation scenario is not ideal. Therefore, in order to obtain the training simulation scenario with a better training effect, the training simulation scenario is optimized, and a training simulation scenario generation method based on the PSO algorithm is proposed. A fitness function is constructed based on the improved situation assessment method of the power field model, and the ability weight parameters are determined by combining the improved AHP with computer simulation software; by instantiating particles with the attributes of the combat platform, the particle swarm optimization algorithm is improved to solve the optimization …

Survey On Intelligent Wargaming: Tactical & Campaign Wargame And Strategic Game From Game-Theoretic Perspective, Junren Luo, Wanpeng Zhang, Fengtao Xiang, Chaoyuan Jiang, Jing Chen

Journal of System Simulation

Abstract: Wargaming is a pre-practice activity to study national security and competition, military conflict and war, crisis management, and other major strategic issues. An intelligent wargaming system needs the ability of artificial intelligence technology. This paper briefly summarizes the research progress of intelligent game, the evolution of wargaming, intelligent wargaming, and strategic gaming methods. From the perspective of game theory, it analyzes the game problem model for intelligent wargaming and sorts out the application mode of intelligent wargaming and the organization mode of a strategic game. An intelligent wargaming service-oriented architecture based on cloud native is proposed. Pre-training method for …

Deceptive Path Planning In Fog Of War, Dejun Chen, Zihao Fang, Yunxiu Zeng, Kai Xu

Journal of System Simulation

Abstract: Computer generated forces (CGFs) are virtual combat force objects created by computers and critical elements in the field of military simulation. Deceptive path planning is a basic method of deceptive behavior, which is important for improving the intelligence and competitiveness of CGFs. However, the current combination of deceptive behavior and military simulation is insufficient, and classical path planning methods cannot effectively take advantage of the partial observability of the battlefield and achieve better deceptive effects. To solve these problems, we propose four new deceptive path planning methods by re-defining a single circular fog road network based on road networks …