Engineering Commons^™

Numerical And Scaling Study On Application Of Inkjet Technology To Automotive Coating, Masoud Arabghahestani Dr.

Theses and Dissertations--Mechanical and Aerospace Engineering

A thorough literature review identified lack of precision control over quality of droplets generated by the currently available industrial sprayers and a growing need for higher quality droplets in the coating industry. Particularly, lack of knowledge and understanding in continuous inkjets (CIJ) and drop-on-demand (DOD) technologies is identified as significant. Motivated by these needs, this dissertation is dedicated to computational fluid dynamics (CFD) and scaling studies to improve existing inkjet technologies and develop new designs of efficient coating with single and/or multiple piezoelectric sensors to produce on-demand droplets. This dissertation study aims at developing a new DOD type coating technology, …

In-Situ Characterization Of Burr Formation In Finish Machining Of Inconel 718, Hamzah M. Zannoun

Theses and Dissertations--Mechanical and Aerospace Engineering

One of the undesirable byproducts that occur during the machining process is the development of burrs, which are defined as rough excess material that forms around the geometric discontinuities of a part. Burrs are especially problematic because they have negative impacts across the triple bottom line: economic, environmental, societal. For one, they are expensive to remove because the deburring process is entirely manual and requires skill. Further, burr material is typically discarded which is adding to the already mounting waste generated from machining such as in coolant and chip disposal. Lastly, there are many societal implications, such as operator injury …

Peridynamic Material Correspondence Models: Bond-Associated And Higher-Order Formulations, Wailam Chan

Theses and Dissertations--Mechanical and Aerospace Engineering

Peridynamic material correspondence model is able to incorporate material constitutive models directly from classical continuum mechanics theory. However, conventional correspondence model faces two major technical issues for its application to practical problems. The first is the material instability, which results severe oscillations in the predicted displacement fields. The second issue is the length scale effects of materials mechanical behavior at low length scales. This research journey mainly consists of three stages. The first two stages of this research journey focus on the development of the bond-associated peridynamic material correspondence model to inherently remove the material instability. The last stage focuses …

Shape Memory Behavior Of Nitihf Alloys Fabricated By Laser Powder Bed Fusion, Guher Pelin Toker

Theses and Dissertations--Mechanical and Aerospace Engineering

NiTiHf-based alloys have emerged as potential materials for applications requiring high transformation temperatures (> 100 °C) with high strength and work output. Currently, it is challenging to produce complex shapes of these materials with tailored shape memory properties or reduce the material waste from machining operations given the cost of these materials. Additive manufacturing via Laser Powder Bed Fusion (L-PBF) represents an attractive way to fill this gap by producing unique geometries from powder-based feedstock. In this method, process parameters such as laser power, scanning speed, hatch spacing and energy density play significant roles in controlling the mechanical behavior and …

Formation Control With Collision Avoidance For Fixed-Wing Unmanned Air Vehicles With Speed Constraints, Christopher Heintz

Theses and Dissertations--Mechanical and Aerospace Engineering

Advances in the miniaturization of powerful electronic components and motors, the democratization of global navigation satellite systems (GNSS), and improvements in the performance, safety, and cost in lithium batteries has led to the proliferation of small and relatively inexpensive unmanned aerial vehicles (UAVs). Many of these UAVs are of the multi-rotor design, however, fixed-wing designs are often more efficient than rotary-wing aircraft, leading to a reduction in the power required for a UAV of a given mass to stay airborne. Autonomous cooperation between multiple UAVs would enable them to complete objectives that would be difficult or impossible for a single …

Design Of Affordable Polyaniline - Based Wearable Sensor For Real Time Plant Growth Monitoring, Temitope Borode

Electronic Theses and Dissertations

The need for precision agriculture in today and future farming cannot be overstressed. Recent agriculture is characterized by numerous challenges such as environmental stressors and resource constraints resulting in low crop yield and unsustainable agriculture practices. Understanding plant growth mechanism and growth rate under the external influence is a bedrock towards precision agriculture practices ensuring optimum yield and sustainable utilization of resources. The current study addresses this need by developing and applying an affordable and stable sensor for monitoring plant growth. The sensor was fabricated by in-situ chemical polymerization of aniline on an elastic band substrate by dip coating. The …

Oxidative Aging And Fracture Behavior Of Polymers And Composites: Theory, Modeling And Experiments, Shabnam Konica

Dissertations, Master's Theses and Master's Reports

Polymers and their composites (PMC) have emerged as effective alternative materials in structural, aerospace, and automotive industries due to their lightweight and tunable properties compared to metals. However, these materials tend to degrade during their operations in extreme environments. In this work, two extreme conditions are considered: - i) high-temperature oxidative degradation of polymers and polymer-based composites ii) Fracture and damage of polymer-based composites under thermo-mechanical loading.

Polymer oxidation starts when oxygen from the ambient diffuses into the bulk material and initiates chemical reactions to develop a coarse, brittle oxide layer on the exposed surface. The oxidative degradation process is …

Model Predictive Control Of Energy Systems For Heat And Power Applications, Chethan Ramakrishna Reddy

Dissertations, Master's Theses and Master's Reports

Building and transportation sectors together account for two-thirds of the total energy consumption in the US. There is a need to make these energy systems (i.e., buildings and vehicles) more energy efficient. One way to make grid-connected buildings more energy efficient is to integrate the heating, ventilation and air conditioning (HVAC) system of the building with a micro-scale concentrated solar power (MicroCSP) sys- tem. Additionally, one way to make vehicles driven by internal combustion engine (ICE) more energy efficient is by integrating the ICE with a waste heat recovery (WHR) system. But, both the resulting energy systems need a smart …

Passivity-Based Numerical Modeling And Grid Integration Strategies For Wave Energy Converter Arrays, Salman Husain

Dissertations, Master's Theses and Master's Reports

The body of work presented here develops numerical time-domain models of Wave Energy Converter (WEC) arrays or wave farms. It will be shown here that a cluster of WECs can be more effective in extracting oceanic energy, can facilitate deployment logistics, and help with grid integration. The objectives of this work are: (i) developing a theoretical metric to evaluate the energy extraction potential of a WEC array, (ii) developing an algorithm that ensures the stability of the time-domain models of WEC arrays, and (iii) identifying strategies that facilitate grid integration and power management of a WEC array. In the process …

Molecular Modeling Of High-Performance Thermoset Polymer Matrix Composites For Aerospace Applications, Prathamesh P. Deshpande

Dissertations, Master's Theses and Master's Reports

The global efforts from major space agencies to transport humans to Mars will require a novel lightweight and ultra-high strength material for the spacecraft structure. Three decades of research with the carbon nanotubes (CNTs) have proved that the material can be an ideal candidate for the composite reinforcement if certain shortcomings are overcome. Also, the rapid development of the polymer resin industry has introduced a wide range of high-performance resins that show high compatibility with the graphitic surface of the CNTs. This research explores the computational design of these materials and evaluates their efficacy as the next generation of aerospace …

Development Of Advanced Models For Pre-Ignition Prediction In Gas Engines And Analytical Model For Wallfilm Evaporation, Ankith Ullal

Dissertations, Master's Theses and Master's Reports

Ever-changing regulations aimed at improving efficiency and reducing harmful emissions have resulted in many power-generation device (engine) manufacturers to adopt new strategies. Computer simulation of these new strategies of power generation requires more accurate and higher fidelity modelling tools. In the present study, two such models are developed. The first model deals with pre-ignition phenomena driven by lubricant (lube) oil in natural gas engines and the second model is relevant to prediction of wallfilm evaporation by employing analytical solutions to transport governing equations for boundary layers.

Pre-ignition in engines has been the subject of current research with the advent of …

On-Ice Detection, Classification, Localization And Tracking Of Anthropogenic Acoustic Sources With Machine Learning, Steven J. Whitaker

Dissertations, Master's Theses and Master's Reports

Arctic acoustics have been of concern in recent years for the US navy. First-year ice is now the prevalent factor in ice coverage in the Arctic, which changes the previously understood acoustic properties. Due to the ice melting each year, anthropogenic sources in the Arctic region are more common: military exercises, shipping, and tourism. For the navy, it is of interest to detect, classify, localize, and track these sources to have situational awareness of these surroundings. Because the sources are on-water or on-ice, acoustic radiation propagates at a longer distance and so acoustics are the method by which the sources …

Partially Stratified Combustion Of Natural Gas For Spark Ignition Engines, Philip S. Zoldak

Dissertations, Master's Theses and Master's Reports

In this work, the advantages of partially stratified direct injection natural gas versus premixed port-fueled injection natural gas spark ignited engines has been studied. The volumetric efficiency, ratio of specific heats and turbulent kinetic energy was found to be higher with direct injection versus port-fueled injection thus improving thermal efficiency. A background study of optical chamber experimental data was performed to develop an understanding on the effect of pressure ratio on direct injection of methane under both fully-expanded (sub-sonic) and under-expanded (super-sonic) conditions. Under-expanded jets had a noticeable advantage in terms of turbulent kinetic energy, which led to enhanced air …

Characterization Of Hydraulic Flow Noise Induced By Spool Valves, Carter A. Paprocki

Dissertations, Master's Theses and Master's Reports

The purpose of the hydraulic flow noise research was to investigate the relationship between operational valve parameters and flow noise generation. The primary consideration was correlating the flow noise generated by the valve with the distinct valve open positions. This data would allow future valve designs to account for features that cause increased flow noise and move those features away from high flow valve displacements. By implementing this, companies would be able to design quieter hydraulic systems that will not expose operators to the current levels of sound found on machines. The experiments were conducted using two valves with different …

Optimal Control Of Nonlinear Wave Energy Converters In Heave For Maximum Power Extraction, Kevin Nelson

Dissertations, Master's Theses and Master's Reports

The marine renewable energy community is interested in maximizing the power generated by nonlinear wave energy converters. Optimal control methods provide a tool to achieve this aim and can also help to inform the buoy design. An energy-optimal control law for a class of non-linear buoy models is derived and is shown to be singular. The solution approach is illustrated using an hourglass-shaped buoy having a cubic, hydrostatic nonlinearity. The optimal control law is only valid on singular arcs, and a method to search for these arcs is presented. Two singular arcs are found for the hourglass buoy model and …

Numerical Design Of Steerable Guidewires, Onkar Prakash Salunkhe

Dissertations, Master's Theses and Master's Reports

Biomedical devices are an integral part of the medical industry nowadays. With the increase in cases of heart disease, catheterization procedures are becoming more frequent. Small-scale actuators are needed for the guidance of small-scale catheters and guidewires to remote targets in the human body. Numerical modelling is needed to guide the experiments in developing such steerable devices and to optimize their design. Here, we designed small-scale steerable guidewires by first developing bending actuators and then assembling them with guidewires. The actuators use materials with strain response to electric potential in a very low voltage range that is not harmful to …

Calorimetric Measurements Of Lunar Regolith Simulant And Water. An Experimental Study Correlating Weight Percent Water And Temperature Change Through Periods Of Phase Change., George B. Johnson

Dissertations, Master's Theses and Master's Reports

Permanently Shaded Regions (PSRs) are cold traps located around the lunar south pole that have been confirmed to contain possible interesting quantities or volatiles such as H2O, CO2, SO2, CH4, and others. [1] The identification of these volatiles on the lunar surface was a critical step in the development of NASA’s strategic goals for scientific discoveries, sustained space travel and exploration, and re-establishing a human presence on the moon. These volatiles are vital to the future of operating in and exploring space. The LCROSS impact revealed the existence of these resources in PSRs but more information is needed about the …

Adhesively Bonded Multi-Material Single Lap Joints Under Static Tensile Loading, Yesim Kokner

Dissertations and Theses

Adhesive joints are widely used in a variety of industrial applications utilizing the improved mechanical properties they provide over traditional mechanical joining methods. [1] The lap joint is a usual test specimen with a view to assessing the strength and properties of joints.

This study deals with the stiffness, strength and fracture behavior of multi-material single-lap joints. It describes the mechanical behavior of a multi-material single lap joints subjected to static tensile loading in the longitudinal direction. First, steel-to-steel and aluminum-to-aluminum joints are tested to establish baseline data. Subsequently, multi-material joints consisting of aluminum-to-steel, aluminum-to-composite, and steel-to-composite joints were tested …

A Study Of Greenhouse Gas Emissions And Performance Of An Internal Combustion Engine Operating On Landfill Gas Blends As Fuel, Lauren T. Creadore

Dissertations and Theses

Landfill gas (LFG) is an abundant resource naturally occurring from the decomposition of municipal solid waste. It can be generated in U.S. landfills at a rate of 24.2 to 59.1 GNm³ per year.¹ LFG presents both a problem and solution with respect to global warming. Composed of carbon dioxide (CO₂, 30-40%) and methane (CH₄, 45-55%), as well as nitrogen (N₂, 10-15%), oxygen (O₂, 0-5%), and other trace gasses¹, LFG that is permitted release into the atmosphere will contribute to the greenhouse gas effect due to the presence of …

Hybridization From Guest-Host Interactions Reduces The Thermal Conductivity Of Metal-Organic Frameworks, Mallory E. Decoster, Hasan Babaei, Sangeun S. Jung, Zeinab M. Hassan, John T. Gaskins, Ashutosh Giri, Emma M. Tiernan, John A. Tomko, Helmut Baumgart, Pamela M. Norris, Alan J.H. Mcgaughey, Christopher E. Wilmer, Engelbert Redel, Gaurav Giri, Patrick E. Hopkins

Electrical & Computer Engineering Faculty Publications

We experimentally and theoretically investigate the thermal conductivity and mechanical properties of polycrystalline HKUST-1 metal–organic frameworks (MOFs) infiltrated with three guest molecules: tetracyanoquinodimethane (TCNQ), 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4-TCNQ), and (cyclohexane-1,4-diylidene)dimalononitrile (H4-TCNQ). This allows for modification of the interaction strength between the guest and host, presenting an opportunity to study the fundamental atomic scale mechanisms of how guest molecules impact the thermal conductivity of large unit cell porous crystals. The thermal conductivities of the guest@MOF systems decrease significantly, by on average a factor of 4, for all infiltrated samples as compared to the uninfiltrated, pristine HKUST-1. This reduction in thermal conductivity goes in …

Mechanical Behavior Of Plain Weave Nylon Reinforced Drop-Stitch Inflatable Panels, Anthony J. White

Open Access Master's Theses

All CUI (Controlled Unclassified Information) is U.S. government property and has been removed from this thesis.

Mechanical Response Of Constituent Materials Used In Plain Weave Nylon Reinforced Inflatable Drop Stitch Structures, Matthew S. Buglio

Open Access Master's Theses

All CUI (Controlled Unclassified Information) is U.S. government property and has been removed from this thesis.

Investigation Of The Effects Of Weave Geometry On The Mechanical Response Of Woven Fabrics, Rogan Daniel Kennedy

Open Access Master's Theses

Document is CUI.

Microstructural Development In Inconel 718 Nickel-Based Superalloy Additively Manufactured By Laser Powder Bed Fusion, Thinh Huynh, Abhishek Mehta, Kevin Graydon, Jeongmin Woo, Sharon Park, Holden Hyer, Le Zhou, D. Devin Imholte, Nicolas E. Woolstenhulme, Daniel M. Wachs, Yongho Sohn

Mechanical Engineering Faculty Research and Publications

Excellent weldability and high temperature stability make Inconel 718 (IN718) one of the most popular alloys to be produced by additive manufacturing. In this study, we investigated the effects of laser powder bed fusion (LPBF) parameters on the microstructure and relative density of IN718. The samples were fabricated with independently varied laser power (125–350 W), laser scan speed (200–2200 mm/s), and laser scan rotation (0°–90°). Archimedes’ method, optical microscopy, and scanning electron microscopy were employed to assess the influence of LPBF parameters on the relative density and microstructure. Optimal processing windows were identified for a wide range of processing parameters, …

Development Of A Machine Learning Model To Characterize The Performance Of A Selective Catalytic Reduction On Filter After-Treatment System For A Heavy-Duty Diesel Engine, Samuel A. Okeleye

Graduate Theses, Dissertations, and Problem Reports (ETD)

Particulate matter (PM) and Oxides of Nitrogen (NOx) are the major pollutants in diesel engines, an attempt to control one leads to an increase in the other, a phenomenon known as PM-NOx trade-off in diesel engine emission control. Currently, these two pollutants are controlled by the Diesel Particulate Filter (DPF) and the Selective Catalytic Reduction (SCR) after-treatment system respectively, in addition to the Diesel Oxidation Catalyst (DOC) which helps to provide 1:1 split of NO/NO₂ and helps with raising exhaust gas temperatures. Today, heavy-duty diesel engines feature a DPF, a primary SCR and a secondary SCR. Despite this complex …

Analysis Of Emissions Profiles Of Hydraulic Fracturing Engine Technologies, Nicholas Joseph Wells

Graduate Theses, Dissertations, and Problem Reports (ETD)

In the past twenty years natural gas production in the United States has significantly increased. This is largely due to technological advancements in unconventional methods of horizontal drilling and hydraulic fracturing. With these new and improved technologies, the United States has been able to increase its natural gas dry production per year by 14.5 trillion cubic feet per year from 2001-2021, a 74.1% increase. Horizontal drilling allows the wellbore to have more contact with the source rock, thus allowing more hydrocarbons to be extracted. Hydraulic fracturing allows oil and gas companies to have access to low permeable source rock, previously …

Development Of Methane Emissions Model To Assess Fuel Recovery Potential At Gas Well Sites Using On Site Compression, Nicholas G. Lindenfeldar

Graduate Theses, Dissertations, and Problem Reports (ETD)

The US natural gas production and consumption has increased 85.5% since 2005 primarily due to the unconventional production methods of horizontal drilling and hydraulic fracturing. Natural gas used as a fuel has a lower greenhouse gas (GHG) footprint than coal and petroleum due to lower Carbon Dioxide (CO₂) emissions when combusted. However, the “greener” benefit to natural gas may be consumed by leaks in production and transmission systems. Methane (CH₄), the primary hydrocarbon in natural gas, has an estimated Global Warming Potential (GWP) of 28-36 over 100 years, meaning it can absorb 28-36 more energy than …

Computational Analysis Of The Stability Limits Of Premixed Methane-Air Combustion In Micro-Channels, Almoutazbellah Adnan Kutkut

Graduate Theses, Dissertations, and Problem Reports (ETD)

Technological progress in the last decades facilitated the development of integrated microsystem devices, including electrical and mechanical components for micro-electro-mechanical systems (MEMS). Such systems necessitate an external power supply, but typical batteries yet have some unavoidable limitations. To address this problem, numerous studies have been conducted to develop alternatives powered by micro combustion – in order to effectively utilize the high-density energy of hydrocarbon fuels. Such a global need has resulted in much more attention devoted to the combustion-based micro-power generation systems. However, to better understand the typical combustion characteristics in such microscale systems, design and performance restrictions need to …

Combustion Feature Characterization Using Computer Vision Diagnostics Within Rotating Detonation Combustors, Kristyn B. Johnson May

Graduate Theses, Dissertations, and Problem Reports (ETD)

In recent years, the possibilities of higher thermodynamic efficiency and power output have led to increasing interest in the field of pressure gain combustion (PGC). Currently, a majority of PGC research is concerned with rotating detonation engines (RDEs), devices which may theoretically achieve pressure gain across the combustor. Within the RDE, detonation waves propagate continuously around a cylindrical annulus, consuming fresh fuel mixtures supplied from the base of the RDE annulus. Through constant-volume heat addition, pressure gain combustion devices theoretically achieve lower entropy generation compared to Brayton cycle combustors. RDEs are being studied for future implementation in gas turbines, where …

Cfd And Heat Transfer Analysis Of Rocket Cooling Techniques On An Aerospike Nozzle, Geoffrey Sullivan

College of Graduate Studies: Theses & Dissertations

In recent years the development of rocket engines has been mainly focused on improving the engine cycle and creating new fuels. Rocket nozzle design has not been changed since the late 1960s. Recent needs for reliable and reusable rockets, as well as advancements in additive manufacturing, have brought new interest into the aerospike nozzle concept. This nozzle is a type of altitude adjusting nozzle that is up to 90% more efficient than bell nozzles at low altitudes and spends up to 30% less fuel. Since the nozzle body is submerged in the hot exhaust gasses it is difficult to keep …